Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. Anyway, i deleted windows and want another OSX on there instead. How do i make this partition bigger please??
Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. I deleted windows after i realised i wasnt enjoying using it at all and wasted my hard drive. I now decided that i want another OSX on there instead yet i have only allowed myself 10 gb on the partition. I have ben thru some programms but am struggling on making this partition bigger.
I only want it at 20gb but cant seem to make the partition bigger, only smaller or split it into further partition.
Is there a way to do this, i have all installation discs from original OSX so think this could help.
Any help please would be fantastic.
Thanks Chris
Hi, dragging the partition will only make smaller, not larger. In disk utility you can only split or make smaller the partitions. Yes i booted from installation disks also but still no help.
And Brody, I am willing to erase the disc completely, infact jus started doing a backup in order to do so but that failed also. And the information you gave on partition a hard drive, Although very simple and i already know how to do this, but it wont let me make the partition bigger, and i dont want to make a new partition, just enlarge the one i already have, which i dont see possible from disk utility.
Getting really frustrated now, even backing up is saying no to me. **** external being a douche.
I dont mind erasing the hard drive but surely this must be doable without deleting the secondary partition back t a single volume, and re partitioning into 2 volumes again.
Thanks again
Similar Messages
-
I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead
I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.
-
i have macbook pro running on 10.9.2 every time i download music files and transfare the it duplicates the file is there any way off switching it off please help
Open Automator
Choose Folder Action for type of document
At the top, for Folder action receives files and folders added to, select Other...
in the window that opens, select your Downloads folder, and then Choose
from the Actions on the left, drag Filter Finder Items over to the column on the right
Where it says Any Content, select Kind
Where it says Any, select music
Drag Move Finder Items over to the rightfor To: select other, and navigate to your user folder > Music > iTunes > iTunes Media > Automatically Add to iTunes
it should look like this:
close the window and give the folder action a name. -
Pleeease help! cant boot macbook pro running leopard!
i am having a huge problem with my macbook pro running leopard. i was originally trying to partition my hardrive for windows with boot camp but that failed cause it "couldnt move files" so i ran disk utility with the installation disk to fix the harddrive.
anyways next thing i know i boot my computer and it stops at the blue login screen before it has the option to login with the spinning wheel and does a loop of blue screens with spinning wheel. wont boot in safe mode and it always stops at the same screen. so i looked around on the web and it sounded like a had to archive and install. so i did that and then half an hour in it told me i had a corrupt file and i had to restart.
so i restarted and then it brought me straight to the leopard installation screen and told me that "mac osx cannot be upgraded to v10.5 on your computer" because "macosx 10.4 or later could not be found"!!! i used the disk util to repair the hard drive but it said everything was fine. i cant safe boot, it wont give me the option to archive and install again its only giving me the option to erase my whole harddrive!
pleeease help! i have not backed up in 2 months! is there anyway to get this to start up or back up some files from this point?Hello and Welcome to Apple Discussions ...
Ok... if you have another Mac, you can do Firewire Target Disk Mode
To transfer files using FireWire:
Shut down the computer to be used as a disk. Leave the other computer on.
Connect the two computers with a FireWire cable.
Start up the computer to be used as a disk, then open System Preferences, click Startup Disk, and click Target Disk Mode. (Or, start it up while holding down the T key.)
A disk icon appears on the desktop of the other computer.
Transfer files by dragging them to and from the disk.
Eject the disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
On the computer you used as a disk, push the power button to shut it down, and then disconnect the FireWire cable.
Carolyn -
Dear all, I have a MacBook Pro bought in April 2011. Last April, it got stuck while the wheel was spinning and I had to force it shut. That cost me my hard drive. Now, it's stuck again. I tried esc, cmd+tab, moving the trackpad on the apple, but no. HELP!
Dear John,
thank you for your prompt reply. After I sent the email, I left the wheel spinning to see if it would eventually stop. It didn't, but after a while the screen turned blue, so I decided to switch everything off with a forced shut-down. I could not restart with the OS DVDs because I am currently away from home, but fortunately everything was more or less fine after restarting. It then got stuck again, I forced it shut again, restarted again, and now it seem to work but I won't overdo it and will switch off smoothly after writing this (unless it gets stuck again). Last April I have replaced the HD, so it's now just under 6 months old. And, of course, since the crash occurred when I was abroad and had backed up just before I left, I have lost only a few days' work. Still, and I know this will make me hugely unpopular here, with my 5 previous laptops running on MS Windows I never had a problem. Which does not mean I loved the OS, or I would not have switched to Mac.
Anyway, and this is the main reason for this message, thank you very much again for your speedy intervention.
Claudia -
MacBook Pro running Leopard has suddenly thinks audio CDs are blank. Also not recognized in Itunes.
MacBook Pro running Leopard has suddenly thinks audio CDs are blank. Also not recognized in Itunes. What should I do to determine whether it's a hardware or software problem? Or is there something unusual about these CDs?
I have the exact same issue.DVD's work perfectly, but audio cd's have stopped working. I think it's pretty recent, but can't confirm it because i don't use audio cd's daily. So I think it might be software related instead of hardware related. I Have a Macbook pro 15" mid 2009 running the latest OSX release.
-
I have macbook pro running Intel Core 2 Duo if I upgrade to Lion OS Xv10.7 will my macbook run slower?
I have a 13" MBP with the Core 2 Duo processor. I do have 8 GB of memory, needed because I need to run Windows in a virtual machine (Fusion) to access client web sites that require ActiveX controls. The Windows VM environment locks up 3 GB of the memory.
I did all the maintenance steps in disk utility on the harddrive before upgrade, double checked compatability with all applications and drivers and made sure that I had a drive clone in addition to my Time Capsule backup.
The only thing that didn't work on Lion was my RingCentral VOIP client, and that was expected from my research.
The upgrade went smooth and I really haven't noticed much speed difference. -
I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anywayOn Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/ -
Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine? Is this because of some recent software update by Apple? 8x8 support acknowledges issues with no current work-arounds? The 8x8 desktop app worked until early December, then quit. I've deleted and re-downloaded the app, but no difference.
The solution is :
1. Delete iPhone configuration utility. Just drop it to the trash
2. Run
sudo rm -rf /private/var/db/receipts/com.apple.pkg.iPhoneConfigurationUtility.*
rm -rf ~/Library/Preferences/com.apple.iPhoneConfigurationUtility.plist*
3. Delete the whole folder: /System/Library/Extensions/AppleUSBEthernetHost.kext
4. Reinstall iTunes (just over the previous one)
5. Restart
incase of any issues, visit this thread: https://discussions.apple.com/thread/3725328?start=15&tstart=0 -
I just got a new macbook pro (my other one stopped working). I am trying to sync the music on my iphone to my new mac's itunes library. I've clicked sync in iTunes but it doesnt work. how can i do this? I don't want it to delete everything from my phone or old computer.
hstarkeyy wrote:
I don't want it to delete everything from my phone or old computer.
You don't need to delete anything from your phone or you old computer.
Copy the entire /Music/iTunes/ folder from old computer or backup to /Music/ on new computer.
If you cannot use the old computer or don't have a backup...
-> Recovering your iTunes library from your iPod or iOS device
Then immediately make a backup of your new computer.
Get an external drive and plug it in and use -> Time Machine -
I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine. I have gone into Disc Utility to repair disc, and get the message: Error: Partition map check failed because no slices were found. I was trying to follow Melophage's instructions by going into "Terminal" and entering "diskutil list; diskutil cs list; mount" and "diskutil info disk2." Then I entered the command "sudo got show disk1." I am sure I have made the problem worse. Can you give me some help? Thank you. blelambert
Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *251.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 250.1 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *249.8 GB disk1
Logical Volume on disk0s2
7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
Unlocked Encrypted
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk2
1: Microsoft Reserved 134.2 MB disk2s1
~ belambert$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
=========================================================
Name: Macintosh HD
Status: Online
Size: 250140434432 B (250.1 GB)
Free Space: 8921088 B (8.9 MB)
|
+-< Physical Volume 7EDAFA20-FF9A-45FB-BA44-6526BB46C381
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 250140434432 B (250.1 GB)
|
+-> Logical Volume Family B47B0B40-CBF2-4D02-BFEF-182061AC6F8E
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
Disk: disk1
Status: Online
Size (Total): 249779191808 B (249.8 GB)
Conversion Progress: -none-
Revertible: Yes (unlock and decryption required)
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFS
~ belambert$ mount
/dev/disk1 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
localhost:/vB3z604U-dvSpES6320fHq on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
~ belambert$ diskutil info disk2
Device Identifier: disk2
Device Node: /dev/disk2
Part of Whole: disk2
Device / Media Name: WD My Book 111A Media
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
belambert ttys000 Wed Mar 11 17:34 - 17:39 (00:05)
belambert ttys000 Wed Mar 11 17:33 - 17:34 (00:00)
wtmp begins Sun Mar 8 14:40
~ belambert$ ~ belambert$ diskutil list
-bash: :~: command not found
~ belambert$ /dev/disk0
-bash: /dev/disk0: Permission denied
:~ belambert$ #: TYPE NAME SIZE IDENTIFIER
~ belambert$ 0: GUID_partition_scheme *251.0 GB disk0
-bash: 0:: command not found
:~ belambert$ 1: EFI EFI 209.7 MB disk0s1
-bash: 1:: command not found
~ belambert$ 2: Apple_CoreStorage 250.1 GB disk0s2
-bash: 2:: command not found
~ belambert$ 3: Apple_Boot Recovery HD 650.0 MB disk0s3
-bash: /dev/disk1: Permission denied
~ belambert$ #: TYPE NAME SIZE IDENTIFIER
~ belambert$ 0: Apple_HFS Macintosh HD *249.8 GB disk1
-bash: 0:: command not found
~ belambert$ Logical Volume on disk0s2
-bash: Logical: command not found
~ belambert$ 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
-bash: 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C: command not found
~ belambert$ Unlocked Encrypted
-bash: Unlocked: command not found
:~ belambert$ /dev/disk2
-bash: /dev/disk2: Permission denied
~ belambert$ #: TYPE NAME SIZE IDENTIFIER
:~ belambert$ 0: GUID_partition_scheme *2.0 TB disk2
-bash: 0:: command not found
~ belambert$ 1: Microsoft Reserved 134.2 MB disk2s1
-bash: 1:: command not found
~ belambert$ ~ belambert$ diskutil cs list
-bash: ~: command not found
~ belambert$ CoreStorage logical volume groups (1 found)
-bash: syntax error near unexpected token `('
~ belambert$ |
-bash: syntax error near unexpected token `|'
~ belambert$ +-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
-bash: +--: command not found
~ belambert$ =========================================================
-bash: =========================================================: command not found
~ belambert$ Name: Macintosh HD
-bash: Name:: command not found
~ belambert$
-bash: 3:: command not found
~ belambert$ /dev/disk1
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported
:~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported
~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
Volume Name: Not applicable (no file system)
Mounted: Not applicable (no file system)racergirl,
have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat? -
My iPad email is showing all emails in my "important" not just the ones I put there. How do I make this stop?
Its problem saving.
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save -
I had to replace my hard drive. Need to re-install office and pages and cannot find the cds. Any help will be appreciated
Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
Or you can purchase the applications from an Apple retail outlet, App Store or the Apple online store. -
Snow leopard 10.6.3 does not boot up. Macbook pro. When I push the start button I hear a chime and then the apple logo shows up and the spinnings circle. In a little while a grey screen comes on and after that a pop up telling me to shut down and restart my computer.I have done that andit still does not work. How do I fix it.?
richardfromfort piercerichardfromfortpierce,
do you or don’t you have your MacBook Pro’s original grey installation DVDs?
If your MacBook Pro is a 2007 model, then Mac OS X 10.6.3 was not installed onto your MacBook Pro from its grey installation DVDs, but rather from a white Snow Leopard DVD. The white Snow Leopard DVD does not have any Apple Hardware Test; to run your Apple Hardware Test, you will need the grey installation DVDs which originally came with your MacBook Pro when it was new. If you no longer have those grey discs, you can contact Apple directly and purchase a replacement pair. (They’re not available in the Apple stores.) -
Managing an iriver H300 mp3 player on a MacBook Pro running Leopard)
I have an iRiver H300 MP3 player.
I want to manage it from my MacBook Pro (running OS X 10.5.2). I am not using iTunes for this, so maybe this is the wrong place to post this (apologies if that is the case).
I have a bunch of .MP3 files I want to copy to the H300. When I plug the H300 into my MBP it shows up as a drive (formatted FAT32) and I can copy folders with MP3's to it. Also, I can delete files. So far so good.
PROBLEM: I cannot reclaim the garbage space (empty the trash) and the MP3's I drag over include a bunch of files that start with "._xxxx" that are empty. Then when I try to play the new songs they won't play because they first try to play all of the empty files.
For now, I can fix the problem because I have an old WinXP machine around that allowed me to locate and get rid of the extra files, but I would prefer not to have to use it every time I want to add or replace music on my iRiver player.
How can I see all of the files on the H300? And, manage it like any other hard drive so I can copy stuff to it and also erase stuff from it?
Thanks for any suggestions.
yours,
BillIf the MBP came with Lion, it most likely won't boot with SL. Easiest thing to do is create a bootable backup/clone of each to an ext HD, partitioned to hold each on a separate volume, ensure that the original machines can boot with their respective clones, and finally, try booting the other machine with the other clone. Images are useless since you can't boot with them to test them out.
Maybe you are looking for
-
Error while posting asset acquisition
hai while posting asset acquisition in f-90 iam getting error that "asset is incomplete' when analysed using RAUNVA00 , it is asking to update field group-22 i.e scrap value, but this field is not found in asset master, pls help me. thank u shivaji.a
-
How to wrap the text in a jTextArea
Hello all, I am currently developing a simple simulation program for our scientific research group. My boss asked me to employ the program with a GUI. However, I am new to Java Swing. It is nice to have you guys that may provide a helping hand to my
-
MSS SAP R/3 Connection Problems
Hi, I've just installed EP6 SP2 and imported the MSS 6.1.2 business package. However all the My Staff delivered iviews give a similar error when trying to connect to R/3. The My Staff iviews use a logical system name SAP_R3_HumanResources. I've confi
-
Enter the valid user name and password to login into the workspace
Dear Reader, As we are working on System 9.2.0, the problem we are facing are as we log into Workspace we get a error "PLEASE ENTER THE VALID USERNAME AND PASSWORD TO LOGIN TO THE SYSTEM"; and the moment we access FR studio another error message pops
-
Hi all, I am having a requirement wer i need to create the report which include the fields PO line item, PO del. date, PO LOI date, and some other char Now can i create the PO line item and char and PO del dat, PO LOI dat as attributes of it. Does it