Hi i have pop up ads everywhere in safari and I'm new to using a mac can someone help me with some info on how to secure myself from this occurring

Hi I need some help with pop up ads there everywhere in safari is there a anti phishing product i should install or settings that need to be changed I'm new to using apple and would love some help here.

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Similar Messages

  • My iTunes account keeps syncing someone else contacts to my fone which is wiping my ones I have to clear my fone then back it up again then it does it again can someone help please

    My iTunes account keeps syncing someone else contacts to my fone which is wiping my ones I have to clear my fone then back it up again then it does it again can someone help please

    If it is itunes on your computer - stop people from connecting their phones to your computer, do not connect to others.
    If it is icloud - change your apple id password here
    iforgot.apple.com

  • I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

    I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
    Thanks in advance.
    EtreCheck version: 1.9.15 (52)
    Report generated 19 September 2014 08:07:14 GMT+8
    Hardware Information: ?
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
    Disk Information: ?
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
      [loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
    Launch Agents: ?
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [running] com.sophos.uiserver.plist Support
      [running] com.trusteer.rapport.rapportd.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.amazon.music.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items: ?
      iTunesHelper
      TomTomHOMERunner
      AdobeResourceSynchronizer
      Dropbox
    Internet Plug-ins: ?
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      EPPEX Plugin: Version: 10.0 Support
      Default Browser: Version: 537 - SDK 10.9
      OVSHelper: Version: 1.1 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ?
      Ultimate
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Perian  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 99
      Oldest backup: 2012-04-20 17:05:32 +0000
      Last backup: 2014-09-18 23:49:25 +0000
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          6% InterCheck
          5% iCalExternalSync
          3% WindowServer
          2% CalendarAgent
          2% SystemUIServer
    Top Processes by Memory: ?
      152 MB SophosScanD
      147 MB InterCheck
      106 MB SophosAntiVirus
      66 MB Dropbox
      57 MB com.apple.iTunesLibraryService
    Virtual Memory Information: ?
      161 MB Free RAM
      1.55 GB Active RAM
      1.41 GB Inactive RAM
      902 MB Wired RAM
      611 MB Page-ins
      0 B Page-outs

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

    I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iTunes and App stores and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
    Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

  • I am using Windows 8.1. I have combined several pdf's, but I can't get the new file to save. Can someone help me?

    I am using Windows 8.1. I have combined several pdf's, but I can't get the new file to save. Can someone help me?

    In Adobe Acrobat use File > Save

  • I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

    Hello zukafu, 
    Welcome to the forums. 
    In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB03621
    Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
    Thank you
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Hi folks, can someone help me with my redemption code? have a creative cloud id made last week. but in order to install my products I have a redemption code needed but that I can't find anywhere. can someone help me??? Thank you

    Hi folks, can someone help me with my redemption code?
    have a creative cloud id made last week.
    but in order to install my products I have a redemption code needed but that I can't find anywhere. can someone help me???
    Thank you

    I have a fully companies annual subscription of 69.99 a month.
    but I can only download the 30-day trial versions.
    and if I want to put on them completely firedamp should I enter a redemption code. could it be that the code later emailed word?
    Met vriendelijke groet,
    Dave Dros
    Van: "hans-g." <[email protected]<mailto:[email protected]>>
    Beantwoorden - Aan: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Datum: dinsdag 21 oktober 2014 10:03
    Aan: iMac <[email protected]<mailto:[email protected]>>
    Onderwerp:  Hi folks, can someone help me with my redemption code? have a creative cloud id made last week. but in order to install my products I have a redemption code needed but that I can't find anywhere. can someone help me??? Thank you
    Hi folks, can someone help me with my redemption code? have a creative cloud id made last week. but in order to install my products I have a redemption code needed but that I can't find anywhere. can someone help me??? Thank you
    created by hans-g.<https://forums.adobe.com/people/hans-g.> in Adobe Creative Cloud - View the full discussion<https://forums.adobe.com/message/6850359#6850359>

  • I cant get on my phone it saids i have to registered as a iphone developer program and i dont want to do that but i cant cancel and i cant get back on my phone can someone help me

    i cant get on my phone it saids i have to registered as a iphone developer program and i dont want to do that but i cant cancel and i cant get back on my phone can someone help me

    Were you running iOS 7 beta?  If so, as a developer you need to log into the Developer forum for assistance.
    Not a developer and running iOS 7 beta?  Then you've stolen Apple's software and will receive absolutely no assistance from this forum.  Enjoy your iBrick!

  • After the OS 6 update my speaker does not work. My music plays but no sound comes out. Can someone help me with this issue? I currently have the 4S.

    After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.

    try to activate and desactivate the airplne switch a couple of time

  • I am having problems getting iTunes to load - if I can't solve this issue I will have to get rid of my iPhone 4S which I don't want to so can someone help me out with this as I'm starting to get really fed-up and paranoid - I need my phone

    As stated above - I am having a really big problem with the iTunes 10.6 installer.
    First tells me 2 DLL files are missing and then that a program needed for the install isn't there.
    I never had a problem withiTunes last year when I had an iPad.
    I deleted the iTunes from then because I found the iPad to heavy - I have very severe arthritis
    in my wrists. I might as well send my iPhone back to the retailer I got it from if this issue can't be solved.
    I'm using Windows XP Pro with SP3 so it should work.
    Please can someone help?
    Cheers
    KnitWit46 in UK

    BOB we need you urgently
    Perhaps Bob will see this thread, he is the professor in these cases.
    You do not use a WEP password but wpa/wpa2 on router and equipment.
    All equipment connects to WiFi, but for your iPad.
    Even with all other equipment WiFi off, you cannot connect your iPad.
    Your iPad connects to other WiFi nets correctly.
    All resets etc done on iPad and Router.
    Still I am not sure it is your router for sure, frustrating...
    I want to test 2 other things:
    1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
    2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

  • I am trying to send an email to myself and BCC everyone in my address, but have forgotten how. Can someone help me with this?

    I am trying to send an email to myself and bcc everyone in my address book, but have forgotten how. Can anyone help me with this? Thanks.

    http://chrisramsden.vfast.co.uk/7_How_do_I_send_to_everyone.html

  • HT4623 I cannot turn off the passcode which I do not want on my ipad.  I keep getting the message "ipad is disabled" I have tried to enter the passcode that I entered when I updated to iOs7 and cannt get to the settings page.  Can someone help me?

    I cannot turn off the asscode which I do not want on mhy ipad.  I keep getting a message "iPad is disabled".  Yesterday, I updated to iOS7 and was asked
    to enter a 4 digit passcode and now  I type in the 4 digits and the ipad will not accept it.  I want to get to the settings page.  Can someone help me?
    Thanks.

    hope you didn't have GREEK keyboard selected
    If you did APple do not want to know that their upgrade has trashed your ipad
    search on  ios 7  ipad  greek keyboard
    to see other sufferers - if you had a greek keyboard then you need to set it to english/french etc
    to do that you need to unlock your ipad
    to unlock your ipad you need to re-set your keyboard
    to do that you need a greek keboard
    to get your greek keyboard back you need to unlock your ipad
    and so on and son
    thank you apple

  • I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all I have on the screen is the apple logo.I have hooked the phone up to itunes but nothing is happening.What do i do.Can someone help???/

    I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all i have on the screen is the apple logo.I have hooked  the phone upto itunes but nothing is happening. What do i do? Can someone help please???

    Sorry, due to the Terms of Use problems with jailbroken devices can't be discussed here.
    You can only get help from those people who told you to modify the software, only they know what the jailbreak did to the firmware.

Maybe you are looking for

  • How do i move my bookmarks back to the left hand side after synching?

    Hi there, I had to get a new lap-top and i synched the settings from my old Mozilla to this new lap-top. It synched quite a lot of stuff; however, on this new lap-top the Bookmarks etc are all to the top right of the screen but i really need the to b

  • Checkbox in the table

    Hi I created table....under that travelrefno,ticketno,.....,  ,.......,..........,......,.........Select......>>>>>.Under "select" checkbox has to displayed in the table. For that i written code like this.But its showing error.Please anyone help me t

  • Air 3.2 Video problem (Mac os 10.6.8)

    Hello I have video application that shows up to 25 streaming videos on the screen. After update to Air 3.2 I see blinking pixels on video. I have simple Video objects.

  • S4_date in so_lines_all

    Hi when I query using s4_date in so_lines_all it takes longer time. Is there an alternate field for s4_date ? This is my query... SELECT ffvtl2.description Region, ffvtl.description organization_name, ffv.flex_value, h.order_number, l.s4_date DAILY,

  • Problem using interMedia

    Hello, I am trying to use interMedia with Portal 3.0 on an Oracle 8.1.7 database. I can turn on Intermedia searching in Portal, but I get an error trying to create indexes. It appears that some ctxsys procedures are missing: - wwsbr_corner_ctx_## - w