Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.
i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.
Try these instructions:
http://support.apple.com/kb/TS3281
You may also have to go to the link in the bottom paragraph if the first page instructions do not work.
Similar Messages
-
IPad - Windows Vista unable to locate Apple Mobile Device (Recovery Mode)
Hey everyone , I am at my wits end trying to fix this problem . Having spent hours and hours researching a solution I am no closer to finding a resolution.
The problem began during a software update last week ( I have an original iPad , prior to this I had used it on my PC for nearly 12 months without issue).
During the software update it started coming up with a "Found New Hardware Apple Mobile Device Recovery mode" then "Browse for Driver software" , so I direct it to C:ProgrammeFiles\Apple\Mobile Device Support\Driver etc .... however it still cant locate it.
Now - the iPad is stuck in Recovery Mode. It has been nearly a week now.
Here is what Ive tried
Confirmed Apple Mobile USB installed and working
Followed the Apple Support prompts re drivers to a tee
Tried manual update of Driver
Updated to latest iTUNES
Uninstalled then reinstalled driver
Read post after post on "similar" issues
Nothing is helping
Please , please , please , pleeeeeeeeeease can you guys help ?
Please note following
My iPOD Classic is recognised fine by my PC and is 100% working
I havnt completely deleted itunes then reinstalled because post after post tells me this doesnt fix this particular issue
During the software update initially it was coming up with a 604 error / Restore as well as the Driver issue , now my ipad is not recognised at all by Windows
Yes - I could take it too another PC to restore , but I want it synced to my PC and ITUNES library
I feel I'm no Computer Dummy , but this one is a total head scratcher
Heeeeeeeeeeeeeeeeeeeeeelp !!!!!!!!!!Fixed.
Took iPAD to Apple store who restored back to factory setting.
Brought home and it synced fine
Back up and running
Diagnosis ? probably some soft ware update glitch
Lesson ? - dont waste your time reinstalling Itunes for this problem -
I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver is not installed. Where can i get apple mobile device(recovery mode) driver software? please help
http://support.apple.com/kb/TS3694#error1
-
i really need help with that
Maybe here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
Otherwise com back with the exact wording of your error message. The one you gave does not seem correct. -
i am using ipod touch 4g
rishiv93 wrote:
i tried all the options...
Did you follow this article about Apple Mobile Device Service? http://support.apple.com/kb/TS1567 -
I ran iTunes update 11.1.4.62x64 on a PC Win 7 and got "apple mobile device failed to start verify that you have sufficient privileges to start system services" and got kicked out of the install process? I deleted iTunes, ran download to reinstall, and now I can't reinstall - same error message. I am logged onto the PC as Administrator. How do I downlaod and install iTunes.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
"This iPad cannot be used as the Apple Mobile Device Service is not started". Does this mean anything to anyone? How can I sync my iPad again? Many thanks.
In Windows 7, go to Control Panel, Adminisstrative Tools, Computer management, Services. In the servies box will be Apple Mobile Device (mine is 4th from top) click on this and on the left side you can start service or right click the service and start from the drop down menu. I set mine to "delayed start" no issues since then.
BPW -
Have to Stop and start "Apple Mobile Device EVERY time
I have an iPad and an iPod which I sync every morning through iTunes with Outlook. And each morning I must stop and start "Apple mobile device" in the Services to get iTunes to recognize my devices.
I have recently uninstalled iTunes,QuickTime, Bonjour.................................and reinstalled the latest version of iTunes and the latest versions for my iPad and iPod.
Nothing has changed. Any other advice.Apple Mobile Device not Starting
· Windows Vista or Windows 7
In the Start SearchServices.
In the Programs
Select Apple Mobile DeviceStop the service
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device. -
hi, firstly my ipod touch is working fine in itunes. i reformated my computer so i lost all my old drivers ect ect, so now my ipod shows up as an image device. i have reinstalled itunes several times and installed apple mobile device but still doesnt work, i have also searched for the usbappl or whatever it is and i cant find it, i have usbappl .dll but no .sys or .inf please help
All it is supposed to show up as in Windows is an image device.
If it's working fine in iTunes, what is the issue? -
I bought this os four days before,but unfortunately havent succed to download it,before it give me error and when i go back to my purchase order i cant find its link to download again
You buy one and only one download.
As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
http://www.apple.com/support/itunes -
connected my iphone to itunes earlier today...it was working fine...now i get an error message saying that my phone is in recovery mode...needs to be reset and that all media and contacts will be deleted.....is this really true? or is there a solution
No it's not true. It's one big practical joke being played on you by Apple.
-
Cannot enable "Apple Mobile Device" in Services for Windows 7 64-bit. Please Help!
Hi,
First post here, but I've been trying to figure out a solution towards iTunes opening my iPhone 4 so I can sync it. But every time I sync it, it gives me a message saying "This iPhone cannot be used because the Apple Mobile Device service is not started".
To try and resolve this, I tried the enabling "Apple Mobile Device" in services method, but when I try to start the service again, I get yet another message from Windows saying "The Apple Mobile Device service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs".
At a first glance, I thought I needed iTunes to be running my iPhone whilst I try to turn the service on, but all I get is the same message saying "The Apple Mobile Device service on Local Computer......", either if the device is connected and attempting to run or not.
This problem appeared out of nowhere when I plugged it in, just to sync some songs and pictures to it. So I don't know what's causing this issue!
And yes, I uninstalled iTunes 10.4.1 and Apple Mobile Device and then reinstalled them. But the issue still continued. Grrr......
It has lasted a stressful 3 days now and if anyone knows a solution or can find one, please let me know as soon as possible.
Many thanks,
Martin.bfin wrote:
When I try to get the one off the website it downloads the 1020 printer driver and it will not work for me. I need this for school asap so please help
Hi,
Please try this, this is for 1022
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=uk&prodNameId=439431&p...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Need Help! Application Deployment wont work
hi, i need help, currently having windows 2008r2 with sccm 2012r2.
The deployment for application for some e.g. adobe reader, firefox is working.
but when we try to deploy a application it is not installing. we tried manually run it from ccmcache with the same command line in the sccm and it works.
The application is pushed to the cache folder. But it just wont get installed. Any1 can help? Really urgent need to solve this.
Thanks
I tried the parameter with setup.exe /s /f1xxx.iss
tried with -s -fixxx.iss also same thing...
but when i manually run the command it work....As Torsten mentioned, check AppEnforce.log from the %windir%\ccm\Logs -folder on the client that doesn't get the software installed.
What are you using as your detection method for the application that fails? Have you tried using
psexec -s cmd (included in the Sysinternals Suite, Google/Bing it) to open a command prompt with SYSTEM account and run the installation command from there? You should always test your application installation commands with SYSTEM account before implementing
them to ConfigMgr, this way you'll make sure that the command works. -
I am using Windows 8.
I downloaded the latest update from a few days ago 1/22/2014. Now my Iphone isnt being registered by Itunes. The computer recognizes it and it charges the phone.
Message was edited by: JamesBa1Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
the Apple mobile device (recovery mode) wont install properly onto computor what should I do? Help!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Maybe you are looking for
-
Lines too dark in PDF exported from Illustrator, any idea?
Hi there! When I export from Illustrator to PDF, all lines in the design looks black, when they are light grey in the original file. Here the examples: Thanks a lot!
-
Pixelpost and Personal Web Sharing in Tiger
Dear Friends: I figured out how to install Pixelpost (for a photoblog) in my OS X Tiger system -- by using MAMP. I changed the Document Root in MAMP so that now it looks to the Personal Web Sharing folder in the Mac (the Sites folder in the /usr/ spa
-
Problems while roaming since last update of an iPhone 5
Since last update the phone loses signal intermittently while a regular phone in the same network/account has a steady, strong signal. I've reset network settings and since it didn't work I did a hard reset, erasing and restoring the phone. The probl
-
Why does my DSC-HX7V camera recently badly overexpose on outdoor shots regardless of the mode settin
After several years of great shooting recently my DSC-HX7V has been badly overexposing on outdoor shots. Inside shots are mosly OK. It doesn't matter which automatic setting I use, the results are the same. I have done a factory reset and this made
-
Obtaining Remote Notification Data from Notification Center
How to get all remote push notification payload from notification center when application is launched from notificaiton center