Hi. I just upgraded to the IPhone 5. I am connected to wifi but I am still unable to access ITunes, App Store and Safari. I have tried helpful tips but nothing is working. Any suggestions? I have also done the sync to Wifi. Thanks
Hi. I have just upgraded to the IPhone5. I have synced to WIFI and I am still unable to connect to ITunes, App Store or Safari. Any suggestions?
Thanks for your help. NR1420
What happens when you try? Do you get an error message.
disconnect from the wifi and try on cellular data, if you can access the apps, then the problems lies with your router.
Similar Messages
-
Apple iphone 4 no ringer, mute switch is off, no volume indicator on screen. tried hard restart and reconfigured via itunes, have IOs 6.1.2, no jailbreak. Can hear ringer with earphone- Have tried almost everything, buit nothing happens. Any suggestions?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?
If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then. -
MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!
Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again
-
App store and safari don't work anymore after maverick upgrade
Hello everybody,
I'm experiencing mysterious problems with app store and safari that I don't really know if it can depend on the installation of maverick (maybe it happened afterwards and I noticed it at a later time).
When I launch app store I have to wait a few seconds for the spinning wheel stopping and nothing happen after. Just green app store window with app store ICON in the middle and nothing else. I've tried to deactivate firewall and to reboot the MAC with cmd+option+P+R without success.
Another strange thing happens with safari. It seems that it won't be able to handle coming html streams from the sites i'm browsing and very often it crashes. I use chrome in place of safari but it annoys me a lot.
I have a MacBook Pro with OSX 10.9.4 (13E28), 2.53 GHz, Intel Core 2 Duo, 8 GB RAM DDR3.
Of course I've tried SW update but, since app store doesn't work, I can't complete the action.
Any help ? Would be very apreciated.
Thank you all in advance,
MauroLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I am looking for a spreadsheet app that I can create new spreadsheets. So far nothing looks promising, any suggestions or do I have to go to windows?
Hi Tx Tar Heel,
I've been using Office2HD: https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
Its cheaper than Numbers and it also works for Word and PowerPoint files too. I like the Dropbox integration. I can start on my Office docs (Word, Excel, PowerPoint) in the office and then edit those files with Office2HD when I'm out of the office. Files saves right back to Dropbox so that when I get back to the office the files are already updated. Not bad for a $7.99 app!
Hope this helps!
~Joe -
my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.
Hi Giannis,
If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
Use Touch ID on iPhone and iPad - Apple Support
Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.
Yes. Delete the Apps that were not Purchased using Your Apple ID.
But a Restore as New is the way to go. -
I have a one-year old iMac and Safari will NOT remember bookmarks I try to add. Any suggestions?
I have a one-year old iMac and Safari will NOT remember bookmarks I try to add. Any suggestions?
Launch the Terminal application by entering the first few letters of its name into a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
ls -Oel Library/Safari
Copy any lines of output that appear below what you entered and paste them into a reply to this message. -
Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz
Verify Step 2 and 3 mentioned in the article.
http://support.apple.com/kb/TS1538 -
MY APP STORE AND SAFARI NO LONGER WORKS PROPERLY AFTER MY SOFTWARE UPDATE. WHAT WOULD BE THE CAUSE?
Can you explain the problems you are experiencing?
-Ethan -
I have purchased some app's like Whatsapp, Flashlight and more from App Store and after about 3 days of usage, all refuse to open up. I have received acknowledgement of payment via email. What should I do to reinstate them?
BRAWO!!!! It solves the problem.
Just hope that i would not be forced to download free Apps every thir day.
Here by us in South Africa, downloads is costing one.
Anyhow, thank you once more. -
HELP! while in France i downloaded the new iPhone iOS 6. When asked to choose a location ( for maps to know what to do) i made the wrong choice and clicked on local, hence France. This scewed up my US iTunes account as well as apps store. . . so ican no longer acces it or download updates. . . it crerated more havoc that ican bare as in iTunes being located in France and in Euros. OUCH. i thought to restore iPhone to factory default. Will that do it or create more problem. (don't want to wtach US movies in French!!!)
My question reall is how can i swithed back my location to USA. . .
thanks for your help, out there.If you go to iTunes on your computer click on the App Store and scroll all the way down . In the bottom right of the screen is a map logo. Click on that and then chose the flag for the country you want
-
App store and Safari not working after Time Machine restore to new hardware.
I just had to install a new hard drive to my mid 2010 imac. I restored with time machine. I cannot find the original OS disc. Upon restoring it appears there is a problem with the webkit framework as Safari, App store, and Skype all freeze upon clicking on them and after bouncing, they never open. Chrome is working. What do I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I am trying to purchase app from app store and its asking me to answer my security questions which I dont know because I never set them up in the first place! How do i get passef this or change it to reset my own security questions??
Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
(88522)
Maybe you are looking for
-
[CS5 - JS] wrong error app.activeDocmunet = there is no document
Hi all I call a function by onClick function in a palette Window. In this function i try to check "app.documents.length" and the result is 1 But, if I check "app.activeDocument" the result is "there is no document" If I set a "MyDoc = app.documents[0
-
Hi, Is it possible to a procedure to know the name of the package where the procedure is ? Thank you. Patrick
-
Same book several languages iBooks Author?
We are planning to produce a (free) iBook for a client. The problem is that it needs to be in at least 14 different languages. Is there anyone who knows how to streamline this production in without having to create 14 separate iBooks?
-
All, I am trying to create some querry for extracting data. I have worked with SD querries. Is it the same for projects as well. Thanks, Rohit
-
Newbie problem - enlightenment: No such file or directory
Hi, I'm new in Archlinux and I've found a ridiculous problem after install enlightenment. I have put: exec /opt/e17/bin/enlightenment_start on ~/.xinitrc, but drops the error: -bash: /opt/e17/bin/enlightenment_start: No such file or directory but the