Hi.. I keep getting error message " No sim card installed " .. Can somebody help me out in this issue ? please
This message keeps coming almost now regularly too often .. Please somebody help me how to solve this .. I have tried removing the sim card but it is of no use ..
Hello henry lfrommiami,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone gives you the message "No SIM Card installed" please follow the steps below.
Update your iPhone to the latest version of iOS.
Turn airplane mode on and then off again.
Restart your iPhone.
Check for a carrier settings update. Go to Settings > General > About. Install any available update.
Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
Restore the iPhone.
If you still see the issue, contact Apple support.
If you see 'No SIM' alert on iPhone
Cheers,
Alex H.
Similar Messages
-
I have recently upgraded from the iPhone 3g to an iPhone 4, and I was going to give my 3g to a friend, but it comes up with the message as above, whenever the phone is turned on...
There is a sim card installed...
My carrier (virgin) say that they have unlocked the phone from optus.
How do I fix this?
thanks
AnushkaVirgin use the Optus network here in Australia - which is why, the 3G phones showed you connected to the Optus network, and not to the Virgin network...They don't have their own network, they piggyback on Optus - which is why it would show that it is locked to Optus!
They also said they would unlock my iPhone 4 - which has been done! So there's obviously something wrong with the phone... -
I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem? The problem doesn't exist when I'm downloading apps for which I pay.
Hi,
See Here:
http://support.apple.com/kb/TS1276
From Here:
http://support.apple.com/kb/TS1424 -
Why do I get the message "no SIM card installed"?????
Why do I get the message "no SIM card installed"?????
That will generally mean that your sim card is damaged and/or corrupted, or it may mean it is inserted improperly, may need to take it out and reenter, or maybe its gone for some reason, lol
Probably the first one. Hit up a Verizon corporate store and have them give you a free fresh one. -
I have and IPhone 5 and I keep getting a message on my phone saying (No Simm card Installed) then my phone freezes and i can't do anything
so i have to reboot it , to get it working again.....Since you do not indicate anything except rebooting, then take a look at this support document for some troubleshooting steps. If you see 'No SIM' alert on iPhone - Apple Support
-
I keep getting an error1 descktop failure while installing cc desktop????
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I am trying to upload my camera's photos to my blog post , using the blogsy app but I keeping getting the error message "insufiecent storage quota" what does this mean? And how can I sort it ?
Thank youNot a good error.
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
"may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
following an update of itunes I keep getting the messageI "Please reinstall itunes. error 7 (windows error 5)." I Have uninstalled and reinstalled Itunes 10.7.0.21 and keep getting the same error message.
A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
... But if no joy there, let's check to see if there's a .NET issue underlying this:
iTunes for Windows: "Error 7" message when opening iTunes -
Had to redownload i tunes following hard drive reboot but now cannot connect the i tunes store as I get the following error message " itunes could not connect to the itunes store the connection timed out " I get this message as soon as I click on the store.
Any ideas how to solve this ?????
BillHad to redownload i tunes following hard drive reboot but now cannot connect the i tunes store as I get the following error message " itunes could not connect to the itunes store the connection timed out " I get this message as soon as I click on the store.
Any ideas how to solve this ?????
Bill -
Cannot add apps to my C150 keep getting error message "Connection Problem"
I cannot add apps to my C150 keep getting error message "Connection Problem. There was a problem connecting to the Internet. Please try again." I keep trying but keep getting the same message. Web Services is enabled and I can browse the Internet using the Internet icon, any suggestions?
Hi cdc58,
I assume you mean C510 not C150. For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee -
I keep getting error messages when I try to activate iMessage on my iPad since installing iOS7. Anyone else having this issue or a solution. I can obviously sign in with the same Apple ID information/password as I have done here and I am connecting with Wifi now and in all other apps.
After looking at some other posts I signed into iTunes and edited my password with my Mac. Then I powered off and restarted my iPad and all is good now.
-
Keep getting error message when trying to sign in to make a Genius Bar Reservation
Keep getting error message when trying to sign in to make a Genius Bar Reservation
Make the reservation by phone.
-
I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.
Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
Look in the Application Support folder for PACE items and delete them. -
Keep getting error message from 'Cron Daemon'
I have been running an Xserve G4 with Mac OS X Server 10.3.9 as a mail server and web server for several years now with no problems. Recently, however, I tried to set up a mailing list, which I had never done before. When I tried doing this, OS X automatically created a mailing list called "Mailman" for me, in addition to the mailing list I created.
Now I keep getting error messages sent by "Cron Daemon <[email protected]>" to that "Mailman" mailing list. The error messages are sent to the mailing list and I get them as a subscriber to the list. They read:
====
From: [email protected]
Subject: [Mailman] Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/senddigests
Date: 6 mai 2006 12:00:00 HAA
To: [email protected]
Modules/gcmodule.c:215: failed assertion `gc->gc.gc_refs == GC_REACHABLE'
Mailman mailing list
[email protected]
http://www.mydomain.com/mailman/listinfo/mailman
===
I did some research on the OS X Server support pages and discussion forums and couldn't find any references to such a problem.
With a worldwide search with Google, I only found very obscure stuff about Python, which I know nothing about.
The mailing lists appear to be working fine other than that (and the fact that Mailman uses "www.mydomain.com" instead of just "mydomain.com").
Any help would be greatly appreciated.
PierreThanks for the clarification. I really do not need anything fancy at this point. Also, please note that I am still using Server 10.3.9, not 10.4.
Now, as for the initial problem, I am afraid it is not gone. It has just changed. Here's what I got in my mailbox this morning:
===
From: [email protected]
Subject: Un envoi sur la liste Mailman à partir de [email protected] requiert une approbation
Date: 8 mai 2006 09:25:02 HAA
To: [email protected]
En tant qu'administrateur de liste, votre autorisation est nécessaire
pour l'envoi du message suivant vers la liste:
Liste: [email protected]
De: [email protected]
Objet: Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/gate_news
Raison: Envoi par un non-abonné sur une liste reservée aux abonnés
Quand vous le souhaitez, rendez-vous à:
http://www.mydomain.com/mailman/admindb/mailman
pour approuver ou rejeter la demande.
From: [email protected] (Cron Daemon)
Date: 8 mai 2006 09:25:01 HAA
To: [email protected]
Subject: Cron <mailman@www> /usr/bin/python -S /usr/share/mailman/cron/gate_news
Modules/gcmodule.c:215: failed assertion `gc->gc.gc_refs == GC_REACHABLE'
From: [email protected]
===
In other words, the error message is still coming, but now it's being sent by "[email protected]" and since this is not a subscriber to the list, I get the admin notice requiring approval. (It's in French because I am using mailman's French-language option, but you should get the gist of it .)
I still do not know:
1) what causes this message and what it means
2) why it's coming from "[email protected]" rather than "[email protected]".
Like I said, I changed the "host_name" option from "www.mydomain.com" to "mydomain.com" in both mailing lists I have, but obviously there is still some part of Mailman that thinks it should be using "www.mydomain.com".
I am afraid I still don't know what to do about this.
FWIW, I ran the check_perms command you gave me this morning and it did find 10 problems and corrected them. I don't know yet if this will help with this particular problem. -
How do I download iOS 6 on my iPhone? Keep getting error message saying "unable to download an error occurred while downloading iOS 6?
How do I download iOS 6 on my iPhone? Keep getting error message saying "unable to download an error occurred while downloading iOS 6?
Maybe you are looking for
-
Opendoc not working on Firefox browser
Hi, We have BO 3.1 SP3 installed on clustered environment. All the servers and services are running on both the machines say serv1 and serv2. We have also enabled SSO using windows AD auithentication. In the firefox config for network.negotiate-au
-
Material Inquiry display with maximum informations/ DBM
Kindly let me know if DBM can provide all the following informations at Material Inquiry level. At MMBE ( Stock overview level) , only a few of the informations listed are available. Parts Enquiry level display Part Number- Part Descriptio
-
Default personnel area in PNP reports
Hi, I have a requirement to default personnel area in all standard PNP reports. I notice there is a parameter id for PNPWERK. I tried setting it in user's data via SU01, however it does not seems to work. Please advice
-
Process first screen r/3 trans iview
Hello, We have created a few r/3 transaction iviews and pre-populated the fields using the "application parameter" field in the iviews. I would like, once the iview is clicked, the iview to go ahead and accept the parameters and return the results w
-
How many wifi networks can an iPhone 4 remember?
As the title really, how many at one time can an iPhone 4 remember, and is there anyway of seeing a list of what it is remembering and then editing that list to delete wifi networks it remembers that no longer exist?