Hi - I've a problem using hyphen in unicode programs

Subject changed by moderator - use a meaningful subject in future
Hi,
Please solution for this error.
In Unicode programs, the "-" character cannot appear in names, as it does here in the name
"TEST-001"
Thanks,
Rajesh
Edited by: Matt on Nov 14, 2008 4:03 PM

Hi,
Unicode programs doesn't allow "-" character for field names. In unicode "-" is used to show the variation for table(internal table) and field names. So it doesn't allow "-" character for field names.
So try to change the fieldname by putting "_" instead of "-".
Edited by: pydi reddy on Nov 14, 2008 7:55 PM

Similar Messages

Problems realted to changing the language for non-Unicode programs from one into anther.

Hi,
Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language
and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs
is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however,
when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is
Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into
English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal
for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while language used
for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language
Arabic to be shown properly, then then I
must let the language for non-Unicode programs be Arabic.
Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs
must be in my Arabic lanague English and whatever location and format are.
Is this happened with you as well?
I would highly appreciate any clarification from you.
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
I am confused about your issue.
when you changed language for non-Unicode programs into English, it show English.
while language for non-Unicode programs is Arabic, it show Arabic, If it's none-Unicode.
This is correct. Why you think it's an issue?
About your second scenario description, I was not clear what you said. Could you give us a explanation?
Note: System display language is not the un-Unicode program language.
You can just choose one language to display the system at same time.
This article might be helpful to you:
Install or change a display language
http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
Change the system locale
http://windows.microsoft.com/en-in/windows/change-system-locale#1TC=windows-7
Karen Hu
TechNet Community Support

Problems realted to changing the language for non-Unicode programs

Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however, when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while langauge used for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language Arabic to be shown properly, then then I must let the language for non-Unicode programs be Arabic. Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs must be in my Arabic lanague English and whatever location and format are. Is this happened with you as well?
I would highly appreciate any clarification from you.
This question was solved.
View Solution.

Hi cooperator,
I saw your post regarding the language questions and I will be happy to help. What are you are experiencing with the languages is normal. The base operating system is in English and while you can change the display language the core kernal of the operating system would be in English.
The reason that the Intel Graphic and Media Control Panel is in English and the rest in Arabic is because the driver would have been designed in English and is hard coded as into the driver but the display language is set to Arabic. So when the language is set to English everything will be in English.
The reason you having issues extracting drivers when you English set at the language is because the HP website will determine where in the world you and when you download the driver it will be the appropriate language for the country you are from. So when it extracts it will look for the proper extraction path using Arabic but everything is English. It work no problem when you are on Arabic because the driver can read the path properly.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Problem indexings hyphenized words in PDFs

Hello everyone on this forum
In the new site we are building, I am using Oracle Text to implement the search functionality.
I have problems indexings hyphenized words in PDFs.
The code I used to create the content table and the Oracle Text index, is like follows
CREATE TABLE JMMC_TST_OracleText( article_id NUMBER PRIMARY KEY
, desc VARCHAR2(30)
, doc BLOB DEFAULT empty_blob()
COMMIT ;
I populated the doc column from a database column in our CMS, containing a PDF document. Just for testing, also populated it from a PDF file, using TOAD for Oracle 8.6.
EXEC CTX_DDL.create_preference( 'jmmc_BSJC_lexer2', 'BASIC_LEXER' );
EXEC CTX_DDL.SET_ATTRIBUTE( 'jmmc_BSJC_lexer2', 'SKIPJOINS', '-' );
EXEC CTX_DDL.SET_ATTRIBUTE( 'jmmc_BSJC_lexer2', 'CONTINUATION', '-' );
CREATE INDEX JMMC_TST_INDEX
ON JMMC_TST_OracleText( doc )
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS ( 'LEXER jmmc_BSJC_lexer2
STOPLIST CTXSYS.EMPTY_STOPLIST' );
COMMIT ;
The following sql
select ctx_report.describe_index('JMMC_TST_INDEX') from dual ;
SELECT err_timestamp, err_text
FROM ctx_user_index_errors
ORDER BY err_timestamp DESC;
shows that indexing went without errors, and index was correctly created.
The word: processo
(that in the PDF is hyphenized visually as
........... pro-
cesso .....
) is indexed as 2 tokens instead of just one token, as the following sql shows
select token_text
from dr$JMMC_TST_INDEX$i
where UPPER(token_text) = UPPER('CESSO')
or UPPER(token_text) = UPPER('PRO') ;
The following query returns 1 result
SELECT SCORE(1), article_id , doc
FROM JMMC_TST_OracleText
WHERE CONTAINS( doc, 'pro cesso', 1) > 0 ;
The following query returns 0 results
SELECT SCORE(1), article_id , doc
FROM JMMC_TST_OracleText
WHERE CONTAINS( doc, 'processo', 1) > 0 ;
Strange thing is, several months ago I tried this test with the same PDF, and everything went by without any problem.
The tests were done on different machines, and on both occasions I used Oracle 10.1.0.5.0.
Looks like I'm overlooking something or maybe some obscure setting (of DB, server or system) is causing the problem.
Suddenly hyphenized words in PDFs, stopped being indexed correctly.
Searched in the manuals and in this forum, and could not find a solution. Any help from anyone in this forum ?
Thanks in advance.

Hello everybody on this forum
As the initiator of this thread, I am glad that after some months, someone else is looking at this issue.
To add/clear to the confusion, I have followed Roger Ford suggestion.
Here’s the test I ran
1) Created a minimal test file (using Windows Notepad) with the following content:
ABC-
DEF
Hex view of above file is:
41 42 43 2D 0D 0A 44 45 46 00
A B C - . . D E F .
2) Created test table
CREATE TABLE JMMC_TST_OracleText(
article_id NUMBER PRIMARY KEY
, fmt VARCHAR2(30)
, doc BLOB DEFAULT empty_blob()
The main difference to Roger Ford test case is: my content column is a BLOB instead of a VARCHAR2.
The reason why my doc column is a BLOB, is because the site I’m building, content come from our CMS, and has different types both text and binary (eg Word, PDFs, etc), that I need to index together.
So I use a mixed-content column in a materialized view, to prepare/consolidate/hold all contents I index.
3) I inserted 1 row in above table (using TOAD for Oracle 8.6.), putting my minimal test file in the doc column.
4) Create Preferences and Index
EXEC CTX_DDL.create_preference( 'jmmc_BSJC_lexer2', 'BASIC_LEXER' );
EXEC CTX_DDL.SET_ATTRIBUTE( 'jmmc_BSJC_lexer2', 'SKIPJOINS', chr(45) );
EXEC CTX_DDL.SET_ATTRIBUTE( 'jmmc_BSJC_lexer2', 'CONTINUATION', chr(45) );
COMMIT;
CREATE INDEX JMMC_TST_INDEX
ON JMMC_TST_OracleText( doc )
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS ( 'LEXER jmmc_BSJC_lexer2
FILTER CTXSYS.AUTO_FILTER
STOPLIST CTXSYS.EMPTY_STOPLIST
FORMAT COLUMN fmt' );
COMMIT;
Note: the basic lexer SKIPJOINS and CONTINUATION characters, were set the same as the hyphen character used in test file.
5) Tokens indexed:
select token_text from dr$JMMC_TST_INDEX$i
Shows:
ABC
DEF
6) Filter indexed content and generate a plaintext version:
create table JMMC_filtertab (
query_id number
, document clob
commit ;
begin
ctx_doc.filter( 'JMMC_TST_INDEX', '1', 'JMMC_filtertab', '11', TRUE);
end;
Hex view of plaintext version is:
41 42 43 2D 20 20 44 45 46 00
A B C - D E F .
Note that the original end-of-line chars (0D 0A) were replaced by 2 SPACES.
It looks like the filter replaces end-of-line chars by SPACES, and feeds the lexer, with something like:
ABC- DEF (instead of: ABC-DEF) ;
So the poor lexer, sees 2 tokens and has no clue they originally were only one hyphenised token.
This is consistent with what Meta Link Note 124624.1 - Intermedia Text & Continuation Character ('-') in PDF says.
7) Just for comparison the result of Roger Ford test (using a VARCHAR column instead of a BLOB) is:
Hex view of the filtered plaintext version is:
61 62 63 2D 0D 0A 64 65 66 00
a b c - . . d e f .
So the main difference seems to be different filtering behaviour for BLOB or VARCHAR columns, in dealing with end-of-line chars.
I have also tried other combinations of INDEX/LEXER preferences (i.e. SKIPJOINS/CONTINUATION/FILTER/NEWLINE,etc), and different file types (WORD,PDF) which means I also tested with “true binary content” and different end-of-line chars.
No matter what I tried, results were all the same: if I index a BLOB column, I’m not able to index hyphenized lines correctly.
According to the manuals, the CTXSYS.AUTO_FILTER were supposed to deal correctly with mixed-content columns if given the correct information (ie FORMAT COLUMN)
Hope this triggers a response from someone.
Thanks to all the people that took time to look at this problem.

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

Huge problem using apple mail while sending email to a group...

Hey - I am quite confused... apple mail has huge problems using groups with about 150 addresses when writing and sending an email... the writing of emails is nearly impossible. Once the group name is inserted in the addressline (address book in iCloud!), apple mail uses nearly 100% CPU and further writing is nearly impossible. When sending such an email, all addresses are suddenly visible - though the box is NOT checked and the addresses should be hidden... what can I do? I use this feature (sending mails to groups) on a daily basis and cannot accept visible addresses...
Greetings and sorry for inconvenient english...
Christof

How about next time you send to the group, cc yourself, or include yourself in the group. Then receive the email on the iphone, you can "reply all" in order to send to the group. If you use an imap account, you can make a new folder, call it something like "groups", and save different group emails there for the next time you need to "reply all".

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa

I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

Problem using integrated WLS in jDeveloper 11.1.2.1.0

Hey there,
I got a problem using the integrated WLS from the jDeveloper 11.1.2.1.0.
After trying to deploy an ADF Web Application on the integrated WLS, I get the following log message:
LOG
+[Waiting for the domain to finish building...]+
+[11:26:04 AM] Creating Integrated Weblogic domain...+
+[11:28:13 AM] Extending Integrated Weblogic domain...+
+[11:30:06 AM] Integrated Weblogic domain processing completed successfully.+
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
+/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/bin/startWebLogic.sh+
+[waiting for the server to complete its initialization...]+
+.+
+.+
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
+.+
WLS Start Mode=Development
+.+
CLASSPATH=/home/robin/bin/wls/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/robin/bin/wls/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_oepe100/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/jdk160_29/lib/tools.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic_sp.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.jar:/home/robin/bin/wls/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/webservices.jar:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/robin/bin/wls/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/robin/bin/wls/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/xqrl.jar
+.+
PATH=/home/robin/bin/wls/wlserver_12.1/server/bin:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/bin:/home/robin/bin/wls/jdk160_29/jre/bin:/home/robin/bin/wls/jdk160_29/bin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/games/bin
+.+
+* To start WebLogic Server, use a username and *+
+* password assigned to an admin-level user. For *+
+* server administration, use the WebLogic Server *+
+* console at http://hostname:port/console *+
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
+/home/robin/bin/wls/jdk160_29/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore7618453572230021232.jks -Dhttp.proxyHost=emea-proxy.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=localhost|localhost.localdomain|127.0.0.1|::1|MUELLER-BADY-GENTOO|MUELLER-BADY-GENTOO -Dhttps.proxyHost=emea-proxy.uk.oracle.com -Dhttps.proxyPort=80 -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/robin/bin/wls/jdk160_29/jre/lib/endorsed:/home/robin/bin/wls/wlserver_12.1/endorsed -da -Dplatform.home=/home/robin/bin/wls/wlserver_12.1 -Dwls.home=/home/robin/bin/wls/wlserver_12.1/server -Dweblogic.home=/home/robin/bin/wls/wlserver_12.1/server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=/home/robin/bin/wls/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain -Djrockit.optfile=/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/robin/bin/wls/oracle_common/modules/oracle.ossoiap_11.1.1,/home/robin/bin/wls/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/oracle/store/gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/robin/bin/wls/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_oepe100/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server+
+<Feb 10, 2012 11:30:09 AM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>+
+<Feb 10, 2012 11:30:10 AM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<Feb 10, 2012 11:30:11 AM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>+
+<Feb 10, 2012 11:30:12 AM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>+
+<Feb 10, 2012 11:30:15 AM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>+
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager saveKeyStore
WARNING: Failed to save farm keystore. Reason {0}
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager createKeyStore
WARNING: Failed to save farm keystore. Reason {0}
oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
+ at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
+ at java.lang.Class.newInstance0(Class.java:355)+
+ at java.lang.Class.newInstance(Class.java:308)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>+
+<Feb 10, 2012 11:30:24 AM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ Truncated. see log file for complete stacktrace+
+Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ Truncated. see log file for complete stacktrace+
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ Truncated. see log file for complete stacktrace+
+>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>+
Process exited.
*/LOG*
After that, I tried setting permissions for the cwallet.sso file to ugo+rwx, but this leads to the same problems as mentioned above.
My second try was to setup an external WLS 12c, but it seems to be not yet possible to connect to a WLS 12c from within jDeveloper.
Do you have any ideas ?
Thank you in advance for your help.
Regards,
Robin

After debugging the WLS Initialisation with jdb, I recognized that there was some trouble with dependent libraries.
In the end, I solved my problem by using another OS (Ubuntu 11.10) for development. There, the WLS works out of the box, even with 64-Bit libraries.
Thank you for your help.
Regards,
Robin

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Calendar Server 3.5: Problem using user's ID with uniuser -mod command

When there are two users who have the same Common Name (CN) in LDAP but
different User ID's (uid
field), I have a problem using the uid
field as an argument to
uniuser -mod in Netscape Calendar
Server (NCS) 3.5. For example, there may be two users, User1 and User2, who
both have the CN "John Smith." 

User1
uid: jsmith2
sn: Smith
givenname: John
nscalxitemid: 10001:00314
User2
uid: jsmith
sn: Smith
givenname: John
nscalxitemid: 10001:00213

Let's say I want to change the value for nsCalOrgUnit2
for User1 to "jsmith." In NCS 4.0,
I can specify the uid as
an argument to uniuser -mod
. However, in NCS 3.5, if I specify the
uid as an argument to
uniuser -mod, the entry
for the user does not get changed. 

Calendar Server 4.0 

%uniuser -mod "ID=00314" -m "OU2=jsmith/OU3=People" -n 10001
 
uniuser: modified "Smith, John" 

(The LDAP entry for User1 also reflects this change.)

Calendar Server 3.5 

%uniuser -mod "ID=00314" "OU2=jsmith/OU3=People" 10001
 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

%uniuser -mod "S=Smith/G=John/ID=00314" "OU2=jsmith/OU3=People"
10001 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

If I use the command uniuser -mod "S=Smith/G=John"
"OU2=jsmith/OU3=People" 10001
in NCS 3.5, the script will change the entry of the first "John Smith" in the
database and will cause the LDAP entry for this user to be updated as well.
However, the entry modified may or may not be the correct one. So, in
NCS 3.5, is there a way to specify a particular uid
to ensure that the correct LDAP entry
is modified?

To modify a user's information using the uid
field in Calendar Server 3.5, change
the user.ini file. The
following steps show how to change a user's information by modifying the
.ini file: 

<OL>
<LI>Open the user.ini
file, which is in the path /users/unison/misc/user.ini

<LI>Add a section containing the desired changes. For example, 

[Test] 
OU2 = jsmith 
OU3 = People 

<LI>Run uniuser with
the following options: 

% uniuser -mod "ID=00314" -s Test 10001
</OL>

It turns out to be a problem with the user Keychain. It has some weird entry that was sending the wrong password. I delete all entries to the server and that corrected the problem

Problem using a conditional suppress in a cross-tab ?

is there a problem using a conditional suppress in a cross-tab on a row or summarized field in crystal XI?
I am using the following conditional suppress on a summarized field and its rows
         If {@SortCode}=4 then true;
Sortcode is a group sorting formula field
the summarized field is a formula field as well.
All of the summarized fields are suppressed although the cross- tab performs correctly on @Sortcode and the summarized field when not using the condition
it seems to me to be a reporting flow issue although i've included "whileprintingrecords" and "evaluateafter" with no success.
i have also moved the cross-tab from the report header to group header and applied a conditional suppress on the group header through section expert.
this supresses the group i dont want but includes grand totals for each group and also varys the number of columns
i can't filter on sortcode because one of the grand total calculations requires those records and a subreport or second cross-tab does not contain the same number of columns
the cross-tab is necessary as a client may have columns spanning one to many pages
thanks for your help

Hi I have a similar problem,
I have an clock in solution, where i have some dates with data such as, various entries for a date eg, 01/11/2010 1hr, 01/11/2010 3 hrs etc, 03/11/2010 2hrs , 05/11/2010 4.5hrs, 05/11/2010 4 hrs so i need total for each day and highlight only those days, where total is less than 4.5, including days which donu2019t have records eg 02/11/2010 & 04/11/2010, I summarise in totals using a cross tab, to get summarised output for each day as,
            Totals
01/11/2010    4
03/11/2010    2
05/11/2010    8.5
in order to get the dates which didnu2019t have records, i added a dataset from Excel spreadsheet where i just have a sequential dates for the year , and use record selection to select only those dates in range which i need to display, so the result i get
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
05/11/2010    8.5
so far so good, all using cross tab, now i want to suppress rows which have total > 4.5 so the result should be
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
How can i do that?

Could not complete the command because of a problem using the Adobe Color Engine

Hi all
This bizarrely started this morning - completely out of the blue - and I've no idea why.
Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
At present I can only safely carry out the work 'manually' by completing all the actions myself.
I can think of no settings that have changed and the OS hasn't been updated in a while.
I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
Any help appreciated as I have a shedload of stuff to process.
Best wishes
TP

OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
BUT!
Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
Will try that out this afternoon, but for now: WIN!
Many thanks for the suggestion!
TP

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message 'An error as occurred. Please try again later'. It has been this way for some weeks. I don't have this problem using Safari or Opera.

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message ‘An error as occurred. Please try again later’. It has been this way for some weeks. I don’t have this problem using Safari or Opera.

I believe that our “Werbung problem” adds an additional second hyperlink to the pop-up window. This second link is activated whenever you trigger a saved hyperlink to a Mail.com site.
I had the same problem and eliminated it by deleting all bookmarks, hyperlinks and automatic links that take firefox to a mail.com address. So I just deleted all bookmarks I had saved for mail.com. I also changed my home page link because it also went to my email at mail.com. I then did a warm boot, opened firefox and re-saved my bookmarks and homepage to the desired addresses. Good luck.

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

Hi - I've a problem using hyphen in unicode programs

Similar Messages

Maybe you are looking for