Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Similar Messages

  • Help!! I'm using a Mid 2012 MBP retina. for the past 2 years my write speeds has been consistently on 400MB/s via black magic test. but now it only have 100MB/s going down to 80MB/s. what should I do???? getting slower...

    Help!! I'm using a Mid 2012 MBP retina 2.3Ghz i7 with 8GB of ram 256SSD. for the past 2 years my write speeds has been consistently on 400MB/s and up via black magic test. but now it only have 100MB/s going down to 80MB/s. what should I do???? I have already cleaned and even restored my MBP still it's on 100MB/s. please help. I have to finish tasks on a timely manner.

    No. This requires completely repartitioning the SSD. You can do that only by using the Network Recovery method or the method I outlined. My method preserves all your data and doesn't require doing a slow Network Recovery. But if you wish to do that instead. The purpose of the whole exercise is to "clean" the SSD of garbage collected during use that tends to cause the SSD to slow down as you've described.
    Install OS X Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Security button. Set Zero Data - one-pass, click on the OK button. Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • I have WD 1TB and use Time Machine for the past 2 years. Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?

    Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?

    anthonycancel wrote:
    I want the folders I already backed up to come together into one folder when that year is over. Is there a way to manually do that or automatic through TM?
    I'm quite sure there is no "automatic" way to do this. I've never heard of anyone trying it either. I suppose if you wanted try it, you could simply create a new folder in the same partition TM is on, label it for that year, then gather all the days for that year and drag/drop them into the folder. I suspect (but do not know) you'd be risking the continuity of your backups, meaning TM would simply start over again, meaning that next back up would start a new series of backups, with the first one roughly equalling the entire capacity of your internal HD, instead of adding only the new data to the previous backup. Once again, I would recommend against it, unless you're fine with TM starting a new series of backups if it doesn't work out the way you want it to. Hope you'll post back with results so we can learn from it.

  • I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.  I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

    I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.
    I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
    I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
    Is there anyone who can give me some pointers ?

    Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
    For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
    To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
    At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
    Good luck!

  • HT1338 For the past few days, I have not been able to read my incoming hotmail nor any of the emails in all my folders on my iMac. However, I can do so using other computers on Windows. Please advise what can be done.

    For the past few days, I have not been able to read my incoming hotmail nor any of the emails in all my folders on my iMac. However, I can do so using other computers on Windows. Please advise what can be done.

    For the past few days, I have not been able to read my incoming hotmail nor any of the emails in all my folders on my iMac. However, I can do so using other computers on Windows. Please advise what can be done.

  • I have been working on the same numbers file for the past few weeks.  The last time I opened it was 1 week ago.  Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

    I have been working on the same numbers file for the past few weeks.  The last time I opened it was 1 week ago.  Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing. 

    Hi Tracie,
    I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
    How did you resolve your problem?
    Would appreciate any help here.
    Thanks,
    Deehay

  • Within Music Library can anyone please explain why when I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums?  How can I correct this?  I have tried to 'drag and drop' but that doesn't work.

    Within music Library can anyone please explain why after I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums?  How can I fix this?  I have tried to manually correct by 'drag and drop' individual tracks but that doesn't work.  My music library includes a number of repeat album artwork images simply because not all tracks are being listed under the one album making my library more difficult to use than it should.  Any advise would be appreciated.

    See Grouping tracks into albums.
    tt2

  • For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.

    For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?

    I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?

    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
    Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
    Be sure to open Keychain Access and repair the keychain:
    Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".

  • TS2198 ical (the calendar program) that came with this apple mac pc suddenly stopped working, then disappeared from the computer, from the desktop where I have been using it for the past two years, without trouble, then from the list of applications. . .

    ical (the calendar program) that came with this apple mac pc suddenly stopped working. When I pulled the icon from the desktop, it then disappeared from the computer.I have been using it from the desktop for the past two years, without trouble. It has uninstalled itself, without my intervention and has eradicated all traces of it, including all my entries from the computer memory. There is no program in the applications list. Can you say why this may have happened please?

    I opened one of the .calendar folders. There was a folder named Events which had either one or some files ending .ics. I opened several of these, which put up a dialogue window showing some parameters with data strings attached as follows :-
    BEGIN:VCALENDAR
    VERSION:2.0
    PRODID:-//Apple Inc.//iCal 4.0.4//EN
    CALSCALE:GREGORIAN
    BEGIN:VEVENT
    CREATED:20110824T070048Z
    UID:6AAAB8A2-64C7-4E88-8E5E-46A4D1036544
    DTEND;TZID=Europe/London:20110824T104500
    TRANSP:OPAQUE
    SUMMARY:Try to avoid general urticaria triggers such as stress\, alcohol
    \, aspirin\, hot baths\, rapid temperature changes\, tight clothing and
    junk or processed foods containing sulphur dioxide\, sodium benzoate\, s
    alicylate and tartrazine.\n\nAvoid tomatoes\, strawberries\, strong chee
    se\, dark fish and fermented foods.
    DTSTART;TZID=Europe/London:20110824T094500
    DTSTAMP:20110824T070102Z
    X-APPLE-EWS-BUSYSTATUS:BUSY
    SEQUENCE:2
    END:VEVENT
    END:VCALENDAR

  • I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

    I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

    Contavct Adobe support thru chat:
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends.  i have tried changing the resolution but that doesn't work.  any suggestions?

    i am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends.  i have tried changing the resolution but that doesn't work.  any suggestions?

    brilliant
    google chrome works where safari doesn't on my macbook air.  many thanks
    i now have an embarrassing qu.  have dowloaded spider solitaire (sad!) and i can't add cards at the bottom of a column for the same reason - the display cuts short.  i have tried to extend it with the arrows in the bottom corners but it makes no difference.  any ideas?

  • I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

    I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

    Hello,
    Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
    Regards,
    Nakul

  • My iCloud keeps asking me for a password even when I enter it, it still keeps asking. I have tried turning it off but it doesn't work.

    My iCloud keeps asking me for a password even when I enter it, it still keeps asking. I have tried turning it off but it doesn't work. It is really annoying!!
    Please help me!! (The same thing happened on this device and when I reset it, it worked....why isn't my iPad 3rd gen. Working...?)

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Do i have to login as orcladmin to Create New Groups

    Do i have to login as orcladmin to Create New Groups and users... because I am unable to add members to the new groups i am trying to create.

    Hi Anna,
    Any user, who is a member of this group, can create Groups in OID :-
    cn=OracleDASCreateGroup,cn=Groups,cn=OracleContext
    By default, cn=orcladmin ( the SuperUser ) and a few other internal application users are members of this group.
    Regards,
    Sandeep

Maybe you are looking for