Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Similar Messages

My new I5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?

Hi there everybody,
My new Iphone 5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?
Some help will be greatly appreciate.
Thanks much!

When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer? Your iTunes library does not have an email address. An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases. Changing your Apple ID will not make songs disappear from your computer's iTunes library.
If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID. In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password). That may not be your current email address, but Apple uses it as your user name, so it does not matter.
On the iTunes Store Home screen, click on Purchased under QUICK LINKS. This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost.
NOTE: If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID.
For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
If that's not what you mean by "changed the email address on my account," please post back with more details.

How can I get just the text to resize, rather than the entire web page?

I used to be able to re-size just text on a webpage by typing Ctrl + +. Today, the entire webpage re-sizes, and when I move to another page it reverts. (I see this mostly in Facebook.). Why did this change, and can I go back to having just the text re-size?

''How can I get just the text to resize -- zoom text only''
steps
#"Alt" if no menu bar, then
# View > Zoom > Zoom Text Only
Zoom text of web pages - MozillaZine Knowledge Base
:http://kb.mozillazine.org/Zoom_text_of_web_pages
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again i keep getting two lots of pics..how can i get just the one set again? thnx

I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again i keep getting two lots of pics..how can i get just the one set again? thnx

You're welcome.
All photos transferred from your computer are stored in the iPhone's Photo Library regardless if you select a single album or folder of photos to be transferred or multiple albums or folders. The photos on the albums or folders of photos include a pointer to the original photos stored in the Photo Library. The photos are not duplicated taking up double the storage space. This way you can view the photos in an album or folder of photos only by selecting the album or folder, or all photos in all albums or folders by selecting Photo Library.
Makes more sense when transferring multiple albums or folders of photos which cannot be changed when transferring only a single album or folder of photos.
The same applies with iTunes and music playlists. A song can't be in a playlist unless it is in the main iTunes library. Placing a song in a playlist does not duplicate the song.

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

Ihave an ipad and an epson nx430 printer. I tried to print my airline itinerary and it printer 4 pages that was mostly ads. How can i print just the itinerary which fits on oneage?

I have an ipad2 and an epson nx430 printer. I tried to print my airline itinerary and it printer 4 pages ,most ofwhich were ads. How can i focus just on the information that i need?

Does the website you're using offer a "printer freindly" button or perhaps the faciltiy to email the intenerary to yourself?
Matt

How can I record just the Capitals hockey games?

I just switched from Comcast to Verizon. I am able to record the pregame show and the post game show for the Washington Capitals, but I can't record just the Capitals hockey games. I do not want to record all of the hockey games; I just want to record the Capitals Games. I don't want to have to search through the listings every week to record the games. Can you tell me if there is a way to do this?

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

How can I import *just* the new images in a folder?

Is there anyway to import only the images within a folder that aren't already in the library? This seems to be the default behavior in Lightroom and makes really good sense. If I add an image to a folder without doing so in Aperture, I'd really like to just import that new version into the library.
Thanks,
-Dave

Yes, I knew that I could do this, but I was hoping for an automated method as I suspect that I will screw things up if I rely on doing everything manually.
-Dave

How can I trace just the lines of a hand drawn sketch.

Hello everyone,
I'm sorry its another inexperienced Ai user here.
I have been using photoshop for a good while now but have only just started to use illustraotr and I could do with some help.
I have a bunch of simple black and white illustations, which I want to vectorise and arrange and compile into completed picture and patterns in Illustrator. I have tried using the image trace function of CS6 and it gives great results but I always end up with a white box behind the illustration. I dont seem to be able to work out how to select just the outline and have a transparent background so that I can work with the differnet bits to creat a completed picture.
Idealy i will have each individual illustraiton on a seperate layer initially as I build up a picture then I will flattern it all togehter at the end.
Sorry if this sounds a trivial matter but any help would be greatly recived.
H

I use sketches a bunch. I love the fact that I can draw on paper, scan my sketch, and finish it with illustrator. The first thing I do when I open up the file is lock it down and creat a new layer. Make sure the new layer is on top of the locked layer(the layer that has you sketch). I use 3 different ways of re-creating my sketch. The first is by using the shapes and shapes builder tools. Add in pathfinder here and there and depending on your design, you could complete a whole sketch with this method alone. For more complex drawings I use the pen tool, this is great for making precise shapes and building composition. One note when using the pen tool is to make sure you have a color and stroke ready when you start using the pen tool, also after you make your first click or anchor with the pen tool set the opacity to around 50%. Another option that I use is to use brushes to create the strokes, and then join or combine the strokes and use live paint or just fill them in as I go. Whichever method you use, lock down the sketch so you can't select it. Make sure that the image of your sketch has good contrast and color before you start. If you have to use Photoshop to touch it up and then bring it in to Illustrator. I also make sketches and then make the basic compsition with illustrator and progressively build the design. Just a thought for those who don't have scanners or don't want to mess with a scanning a design. Hope some of this helps.

How can I select just the clips, or just the transitions?

If I have a timeline with 50 or more clips (or still shots, in my case) with cross dissolves between each one, I would like to select just the clips, or just the transitions, but not both. How do I do this?
Why? I am creating a video with hundreds of stills and a few video clips, and occasiionally need to change the duration of all stills at the same time (from 3 seconds to 4, for example). Or, if I want all of the cross dissolves to last 1:15 instead of 1:00, it would be nice to select and change them all at once. However, in both cases, I can't figure out how to select all 50 without having to Command-click 50 times.
Any ideas you have will be appreciated.
Bart

To perform the same duration change on just the transitions (cross dissolves, in this example), this technique will work:
Open timeline index.
Enter "cross" in the search box (or whatever transition you're wanting to change).
Select all cross dissolves in list (click one, then type Command-A).
Click the time strip in the top of the timeline area.
All of the transitions in the list should now be selected in the timeline.
Control-D to change duration.
Enter new duration.
Hit Return.
I hope this saves someone all of the time I spent on it today. I'm still ahead, though, thanks to Tom's help. This saved litterally hundreds of Command-clicks.
Bart

How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages. Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web. However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine. I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours. How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s). Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

HT4946 How can I restore just the contacts from a backup?

I had to restore my computer to factory settings as it would not download any new apps from iTunes. I now want to restore my contacts. I do not want to restore settings, etc. as these may have been the source of the problem.
I don't want to sync all my windows contacts, just the ones I had on the phone. I can't find a way of doing this Can you help?

You have to restore the entire backup. You can restore the backup, then back up your contacts using an app like My Contacts Backup. Then restore it as new again and use this backup to re-import the contacts to your phone.

When I long press a link, in addition to opening a context box, it also opens the link in that window. How can I get JUST the context window to appear?

I am an avid Pocket user and I like to scroll through various blog sites while saving articles to read later. Typically, I have been using Google Chrome browser which requires me to open each article in a different tab and then share that article to Pocket in order to save it. I was ecstatic when I found out the firefox browser worked very well and even supported add ons. I decided to try it but have run into a major issue. When I long press a link in order to share it, instead of a context window appearing and the website staying the same, a context window opens while the website loads the link. When I right click on a link in my browser, it doesn't mean I want to go to that link so I'm not sure why the same procedure would cause the mobile browser to do so. Is there a way I can long press a link without opening the link in that tab?

Okay, this is silly, but it's the best I could come up with:
I tested on Gizmodo: when the long press menu appears, instead of lifting your finger straight up, slide it down a bit, just off the link, before lifting your finger off the glass. Then the script in the page does not detect a "mouse up" (or equivalent event) on the link. Does that work for you?
I realize you can't actually see the link through the menu, but one or two lines of text height usually will do it.
Probably would make sense for Firefox to cancel all events associated with touching the link once the menu is displayed. Or to make sure the site understands it as a right-click (that seems harder). I haven't checked to see whether any ideas along these lines have been filed in the bug tracking system.
''Edit: Tested on a Nexus 5 (LG).''

How can I text just the letter K?

It keeps getting changed to I. Over and over and over and over. Never learns that I want to send K. I can't add K as a shortcut because it's actually too short (go figure). I always have to cancel the attempt to auto-correct to "I" or else just forget and send the "I" to whoever.
Autocorrect is annoying but overall I want to leave it turned on.
Does anyone know of anything I can do to get the letter K to be accepted as a valid character to send by itself?

I guess the send button is being considered as a confirmation to accept the correction, in which case you may want to post that as a bug…
http://www.apple.com/feedback/
I didn't test hitting send sorry I was trying to avoid polluting my messages (& my recipients ).
I did notice that the 'double tap spacebar' shortcut (to add a period) would leave the K in place. Perhaps you need to turn the single key press answer into a 3 tap one! A space may be enough to move away from the autocorrect popup.
If you sync to a Mac you may find the spelling list …~/Library/Spelling/dynamic-text.dat
Textmate 2 will show the text along with the special record separator - it is a custom format, so don't edit it.
Sadly I can't figure out how to move this back to iOS to correct it, Apple really need to add user dictionary editing as a feature, otherwise habitual typo's become permanent.
Resetting the dictionary could help, but it's unclear is 'K' to 'I' is stored in that dictionary.

30" display and 15" PowerBook. How can I use just the 30"?

So i just got a 30" monitor. Hooked it up to my 30" and it works great. But when i use design applications its a bummer because the top menu bar is on the small 15" monitor. Then I use mirror displays but think it such a waste of space to not use the PowerBooks sweet screen. How can I just use the 30" monitor by itself from my laptop?

In the "Arrangement" pane of "Displays" system preference, turn off mirroring, and drag the picture of the menu bar to the picture of the monitor you want it on. If you want to use only the external display, attach the power adapter,and an external keyboard and mouse. Close the lid. The computer will sleep, but will wake, and continue to run with the lid closed, when you use the external keyboard or mouse.

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Similar Messages

Maybe you are looking for