Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing

Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing has changed. I must say that my iphone was working perfectly until the last months my battery began to die all from a sudden, so my phone got turn off really frequently, so then i ordered a battery and changed it myself so when phone was on.. it had this problem..    im desperate here

No I haven´t take it to Apple Store, i think I will actually. My iphone was jailbroken and ulocked with gevey sim, but when this failures began i decided to restore it, and I did preserve the baseband, but when I took it into one of these "Places" they told me it would be a good idea to do a clean restore and see if this fixed the problem so I upgraded my baseband, and right now my iphone is freshly restore, no jailbreak no nothing.
Btw yes something like a year ago my screen was replaces by others not by apple, but I didnt had any issues after this.. until today (a little more than a year later).

Similar Messages

  • TS3694 I applied the update today to an Iphone 5 and it totally trashed the phone. Total restore WOULD NOT bring it back- it is a nice paper weight- Error 6. Any body got a clue?  Have tried restore several times- yes- disconnected all usb devices  THX

    I applied the update today to an Iphone 5 and it totally trashed the phone. Total restore WOULD NOT bring it back- it is a nice paper weight- Error 6. Any body got a clue?  Have tried restore several times- yes- disconnected all usb devices  THX

    Did you try all 7 trouble shooting steps outlined Apple Support Page you linked from?

  • I cant open Photos om my mac. Just upgraded to Yosemite. The message I get is: An unexpected error has occurred. Please quit and restart the application. I have done this several times but nothing seems to work. iPhoto is gone. What do I do?

    I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

    I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

  • On starting up my new iPhone 4s, it freezes on the apple logo. I have tried the reset buttons trick and have tried restoring again too but nothing works. Any other ideas? Or is the phone simply corrupt in some way?

    On starting up my new iPhone 4s, it freezes on the apple logo. I have tried the reset buttons trick and have tried restoring again too but neither works. Any other ideas? Or is the phone simply corrupt in some way?

    Did you try to connect in recovery mode and restore without using the latest backup?
    Recovery mode and  How to back up your data and set up as a new device
    If setting up as new device does not work, you'll have to get it serviced or looked at by visiting an Apple Store.
    Did you try to remove the ipsw firmware file and restore, to make iTunes download a new copy from Apple?
    Those files are located here:
    Rename, move, or delete the iOS software file (.ipsw)
    iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
    Mac OS X
    iPhone
    ~/Library/iTunes/iPhone Software Updates
    iPad
    ~/Library/iTunes/iPad Software Updates
    iPod touch
    ~/Library/iTunes/iPod Software Updates
    Note: The tilde "~" represents your Home directory.
    Windows 7 and Vista
    iPhone
    C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
    iPad
    C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
    iPod touch
    C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
    Note: If you don't see the AppData folder, you may need to show hidden files.
    Message was edited by: Ingo2711

  • I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

    I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

    Hi 49balf,
    Thanks for visiting Apple Support Communities.
    I recommend removing and reinstalling iTunes using these steps:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    You can find the article with these steps and more information here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best,
    Jeremy

  • I am unable to get past the Terms and Conditions in the new update. I have hit agree several times but can not get past that part. What do I do next?

    I am unable to get past the terms and conditions part of the upgrade. I have hit agree several times. What do I do?

    Scroll down to the bottom of the terms and conditions, then the Agree button will light up and you can proceed.

  • HT201263 I have tried this several times but cannot switch the ipod touch back on - but every time I connect it to itunes it says that is in recovery mode stil.  What am I doing wrong?

    I have tried several times to unlock my daughter's ipod touch by following the instructions, but so far I cannot turn the ipod back on.  Everytime it seems to be finished updating I unplug it and it again says that the ipod is disabled and gives me the prompt to start again.  Can someone help please?  Am I doing something wrong?

    - Try DFU mode and restore:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Next try the manual install as described here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    After yo successfully download the file, plae the iPod in recovery mode and try a restore.
    It sounds like the file is not fully downloaded before the recoverymode expires on the iPod.

  • I was having problems with my iPhone 5s. Was able to get another 5s. In the process of setting it up, but it is taking forever ... and it seems to be frozen at one particular place.

    I was having problems with my iPhone 5s (couldn't receive iMessages or emails). Cell company tried "fixing it" but to no avail. They ordered me a repacement 5s. Trying to set up, but it is taking forever. Seems to be stuck in one particular spot. It's at the stage with a black screen, white apple icon and a bar underneath. The bar is is just a fraction complete, and it has been stuck in this spot for almost an hour. Tried to restart it but it went to the same spot and froze again.

    BOB we need you urgently
    Perhaps Bob will see this thread, he is the professor in these cases.
    You do not use a WEP password but wpa/wpa2 on router and equipment.
    All equipment connects to WiFi, but for your iPad.
    Even with all other equipment WiFi off, you cannot connect your iPad.
    Your iPad connects to other WiFi nets correctly.
    All resets etc done on iPad and Router.
    Still I am not sure it is your router for sure, frustrating...
    I want to test 2 other things:
    1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
    2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

  • Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

    having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore...
    Reset your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • HT1222 I am having problems with my iPhone.  It won t turn on, I believe it was charged , it has

    I am having problems with my iPhone.  I tried charging it nothing happened.  It did not fall, it just shut down?

    try doing a reset, hold down the home/power button together until you see the apple logo and then release.  Then wait for you phone to boot back up.

  • Hello! im from argentina. im having problems with my iphone. can my friend take it to usa for a cheking?

    hello! im from argentina. im having problems with my iphone. can my friend take it to usa for a cheking?
    what do i need to take my iphone to an apple store? just the iphone? or the charger also? what about the ticket?
    sorry about my english

    If your phone was purchased in the US, yes. Otherwise, no. And, you only need the phone, nothing else.

  • HT1688 hello i am having problems with my iphone 3gs

    hello i am having problems with my iphone 3gs i cont have a sim card to activate it in there anyway i can by pass the activation part of the phone?

    I would restore the phone as new
    iTunes: Restoring iOS software - Apple
    then get it replaced through apple

  • HT201406 Need an appointment because I'm having problems with my iPhone .

    Hi! I need an appointment because I'm having problems with my iPhone 4S , when I'm talking to people I'm told they could hardly hear me!

    http://www.apple.com/retail/geniusbar/

  • TS3694 I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks

    I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks

    nomibutt wrote:
    ... its showing 1015 error.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • When i sign out of imessage, and then sign back in, all the messages i received during my time away, are not there instantly. help?

    when i sign out of imessage, and then sign back in, all the messages i received during my time away, are not there instantly after i sign back in. help?

    hi,
    Mac, iPhone, iPad, iPod Touch ?
    Do they appear eventually ?
    The iMessages are "pushed" to the devices which means there can be small delays between the server recognising the device went Off Line and coming back.
    10:19 pm      Thursday; July 10, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for

  • Ipad is locked due to forgotton password, how do i fix it, please

    can anyone assist me on unlocking my ipad2.  i forgot the code and now it wont allow me to access it even after it is connected to the desktop last used to backup on

  • Print gets cut off C4280

    I am sending from a hospital - we have purchased a Photosmart C4280 All in One Printer - The printer has now started cutting off the 4x6 print - we print all our specimen pictures from a SD card - It's like the picture gets cut off - the date is part

  • How can I identify reports that use specific tables

    Hi, is there a way that I can identify the reports that select from specific tables?  We have 3,000 reports in business object enterprise XI R2 SP5. and we're trying to identify all the reports that use a specific table.

  • Value diffrence for the transaction S_ALR_87012344 & FBL3N

    Hi Sap guis, Can any body explain why the system is showing different values for the same iput values like Doc type WE , Co code ,Business area and posting periods in the both transactions like S_ALR_87012344 and FBL3N Thanx

  • Tips for making strings sound more real

    Basically i'm having trouble getting my strings from the exsp24 to sound real. mainly the violins. does anyone have any good tips?