Hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success

hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?

Try here:
iOS: Not responding or does not turn on

Similar Messages

  • I'd tried to restored my iphone but after that its just display the apple logo and nothing to work on?

    I'd tried to restored my iphone but after that its just display the apple logo and nothing to work on?

    Hello there, Shaneol10.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    or
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?

    I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?

    Hello, Spedellen. 
    Thank you for visiting Apple Support Communities. 
    When experiencing issues restoring an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • After installing the latest update for Mavericks and restarting, my Mac just displays the Apple logo and the spinning wheel. What can I do to fix this?

    I installed the latest update of Mavericks from the App Store today and after restarting my system it doesn't go beyond the Apple logo and the spinning wheel. I tried resetting the NVRAM but it still has the same problem.

    1. Startup in Safe Mode
        http://support.apple.com/kb/PH14204
    2. Repair Disk.
        Steps 1 through 7
        http://support.apple.com/kb/PH5836

  • I tried to power up my MB Pro yesterday and got the usual start up screen displaying the apple logo and the indicator that the start up process was proceeding.  After 5 minutes, the logo disappears with a grey circle with line thru it and nothing.  ???

    I tried to power up my MacBook Pro yesterday and got the suual grey screen, Apple logo, and the start up indicator circling gear.  After 5 minutes of this, the logo disappears replaced with a grey circle with a line thru it.  This is the first time this has happened. 

    hi Melophage,
         Please Help!!!! https://discussions.apple.com/message/25645888#25645888

  • I updated the IOS and my phone no longer works, it just displays the Apple logo and eventually dies. Any suggestions?

    I updated my IOS and now my phone no longer works. All I get is the Apple logobuntil the battery dies. Any suggestions?

    Charge the battery for several hours.  Then reset by holding the on/off and home buttons together for about 10 seconds till the Apple logo appears.
    If you then see the USB cable and an iTunes display, follow the direction and plug your iPhone into iTunes.

  • My iphone wont boot is just displays the apple logo and some small typing

    My iphone is frozen and is only displaying the black screen with the apple logo with some small white text

    This is what I am referring to. See the red circle. This is when responding to this forum.
    Try this support document for when you cannot update or restore. See if that helps you. http://support.apple.com/kb/HT1808

  • Iphone 4 has a black screen which will display the apple logo for approx 10 seconds, then goes blank for 10 seconds and so on.  I have tried a hard reset with power button and home button but no change.  Get no response when attempting to connect to itune

    iphone 4 has a black scrren which will display the apple logo and appears to be at start up but then blacks out for approx 10 seconds and then displays apple logo again.  Same action over and over.
    I have attempted hard reset but cannot complete.  Also attempted to connect with itunes and it does not recongize device.
    Device is frozen in this display loop.  Have an appointment with genius bar tomorrow but it's a 2.5 hour round trip so suggestion appreciated.

    Your device may need to be restored as new in iTunes (instead of restored from a back up as it seems that there is a software issue on your phone).
    If your phone is not able to connect in iTunes try forcing recovery mode (http://support.apple.com/kb/HT1808)
    * power off your phone.
    * Hold the home button while connecting your phone to iTunes.  You should see the connect to iTunes window and your computer should give you the recover mode alert.
    *Restore your device as new. Being sure not to restore from a previous back up.
    You will then want to sync your information back to your device from Outlook, iCloud, Google or wherever your information is stored.

  • Hi my desktop starts and then shuts down after the apple logo and an oblong box appear.thanks

    hi my mac
    desktop starts then shuts down after displaying the apple logo and an oblong box.
    thanks

    Sounds like something is badly wrong with your system.  First step would be to start up from your Mac OS X install disk, by inserting the disk and holding down 'c' at startup.  Select your language, then choose Disk Utility from the Utilities menu.  In Disk Utility, choose your hard drive and click the Repair Disk button.
    If problems are repaired, try restarting and see if the problems are gone.
    If problems couldn't be repaired, you can try DiskWarrior, which can sometimes repair problems that Disk Utility cannot.  However, if nothing works, you probably are going to have to erase the hard drive and reinstall the system from scratch.  Hopefully you have backups!
    If there were no errors, or they were repaired successfully but that didn't fix the problem, then you should try booting into safe mode by holding down the shift key at startup.  If that works, you may have some bad third-party software.  What that might be is hard to say, though.
    If nothing works, try rebooting from the Mac OS X install disk again and install Snow Leopard right on top of your current system.  That shouldn't disturb your apps or data, but of course, if you don't have backups, you're in trouble if something goes wrong.

  • My iphone was fully charged and now it won't turn on or do anything

    My iphone was fully charged and now it won't turn on or do anything

    I'm sorry, it seems that the problem is that my phone WON'T restore. I just tried restoring again and it keeps giving me the 2001 error. Help.

  • My iphone 5 suddenly wont fully boot...it stuck on the apple logo and goes of after 20 -25 secs and comes on by itself after a minute or two but still stuck on apple logo..also i am able to see a bit of lighting on the dark screen whenever it goes of

    my iphone 5 on the ios 7.1.2 suddenly wont fully turn on...it gets stuck on the apple logo and stays like that for approximately to 90 secs then goes blank but I can see a bit of lighting  behind the dark screen....it goes off by itself and comes on by itself trying to boot but still gets stuck on the apple logo after the dim light shows....when I connect to iTunes my phone can only be recognised only in recovery mode thus if I force it into recovery mode. My main worry is I don't have a back up of any of my data...on icloud I have just less than 2GB of my data which is as a result of incomplete back up...HOW CAN I GET THIS PHONE WORKING AGAIN WITHOUT LOSING MY DATA...if I can only just recover my data I would really appreciate it as I really  need almost everything on it back...if I can only get retrieve my data and lose the phone I wouldn't mind at all....Anybody know how to resolve this??Kind Regards

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • I was doing an update on my ipad2 and I received an error and now my ipad is not working at all.  On the screen it just has the apple logo and a loading bar, but nothing is happening.  What can I do?

    I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message.  Now my ipad is not working at all.  The only thing that appears on the screen is the apple logo and a loading bar.  I tried to turn it off, but it just wont do anything. Help!

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.

  • My i phone 3gs was hang with the apple logo and its not booting

    my i phone 3gs was hang with the apple logo and its not booting can any one say me how to fix this .

    my phone is blinking with the apple logo and will not start

  • HT4061 my iphone will not do anything...i tried to restart and reset......the phone only displays the apple logo.

    my iphone 4 will not do anything....i tried restarting and resetting....the phone only displays the apple logo.

    Hello there, Faustinamarfo.
    The following Knowledge Base article provides some troubleshooting steps for your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • How can I include multiple hyperlinks in an ical entry?

    When I create an event in ical, I can add one hyperlink. I'd like to add more than one. I have searched for info on this, but the best I've found is here. Using Option-Return to go to a new line doesn't work.  I can put multiple urls in that way, but

  • What are the Methods to check the Relation between BP Number and User ID ?

    Hi Colleagues, Requirement Hi, i need to generate a report to Management for approx 1400+ Partners and am facing some diffculties. While i have the BP number of the partners and their email ID's, i am unable to find the USer ID (ABAP ID) that these a

  • Need help with this xml gallery !!!

    i have build a gallery but its very simple...... it takes images from xml file. i have attached all files in zip. i just want two things if anyone can help. first when i press next button it goes to next image but with no effect. it just displays nex

  • G3 nano is synced w/ my IBM T40 laptp.  want to sync it on new imac.

    I want to be able to use my nano w/ my new imac. when i installed itunes and then connected my nano, the library was not there and the nano was not recognized. what do i need to do to get the nano to work on my new imac ?? also, once i get the nano t

  • Issue with SAP query

    Hi experts, I not able to download the user group , infoset and query through standard program RSAQR3TR, even though the user group, infoset and query exists. i. e with download option in RSAQR3TR prgram. so, can u please guide what exactly might be