Hi, My Macbook pro is not working

Hi,
From last few days I am facing problem in using my MacBook Pro. Every execution (pressing ENTER) takes atleast 10 to 15 to start the application. I am not sure what is the problem.
Many applications are not executing at all. Every now and then there is a popup comming and saying that "Finder quit unenexpectedly" "Click Reopen to open again. Click Report to see more details and send a report to Apple"
Please help me.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • The sound on my macbook pro is not working

    The sound on my macbook pro is not working. When I increase the sound, the icon appears as if everything is working, but no sound comes from the speakers. Earphones don't work either. I have tried a PRAM reset but at times, this doesn't even work. It's really frustrating having to restart my computer every time I want the sound to work, and even when I do that, theres a 50 50 chance of it working again. It generally happens after my laptop goes to sleep and I wake it up. Has anyone else had this problem and fixed it or even know what caused it?
    There are a lot of discussions around the earphone jack but I have checked that. I've tried a PRAM reset which hasn't worked, and my sound output is set to Internal speakers.
    HELP!!

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • Macbook pro sound not working

    It seems that the sound on my macbook pro does not work when watching videos such as those on youtube. Please help.

    Here is YouTube's help page if you have no sound on YouTube videos:
    http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
    Try re-installing Flash player.  I'm assuming at this stage that all your other audio works fine, e.g. CDs, DVDs, system sounds, etc...

  • The "A" key on my macbook pro is not working Can I fix it myself?

    The "A" key on my macbook pro will not work.  How can I fix it?
          -----Earnie---------

    Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405

  • Output volume on my MacBook Pro is not working

    My output volume on my MacBook Pro is not working. When I go to "Settings", then "Sounds", then "Output", I can not slide the volume bar at all, or change it in the menu bar?

    See if a PRAM reset will solve the problem;
    http://support.apple.com/kb/HT1895
    Ciao.

  • Please can someone help,my in built camera on my Macbook Pro is not working what can i do to activate it back.

    Please can somone help my in built cameral on my MacBook Pro is not working, the green light does not show again and the camera is not working . what can i do to active it back.
    Semako

    Yuu can try to reactivate your iSight camera by opening up iMessage.. navigate to Preferences/Audio Video,and then click on Camera. IT shoudl be grayed-out if you only have one camera hooked up to your machine. If you have an external camera, then disconnect it from your machine. 

  • My charger for my MacBook Pro is not working

    The charger cord for my MacBook Pro is not working. This happened before but I do not remember what the tech guy had me do. It was a simple fix....

    If the SMC reset does not work check for contamination or stuck pins:
    Troubleshooting MagSafe adapters
    http://support.apple.com/kb/TS1713

  • One of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

    one of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

    Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405

  • My macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing.

    my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing

    Gray, Blue or White screen at boot, w/spinner/progress bar

  • Macbook pro is not working, only mouse!

    How can help me my macbook pro is not working properly!
    I can only use the mouse. What is going on and can tell some one what i can do!
    Thank you already

    Hi executive1961,
    Welcome to the Support Communities!
    The articles below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/TS1449
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    - Judy

  • Macbook pro is not working with Canon pixma iP1500, but has previously.  The printer works with an old PC without trouble.  "printer is offline" message when this printer is plugged into macbook.  Any clues to get it to work?

    Macbook pro is not working with Canon pixma iP1500 but has previously.  Printer works with an old PC but macbook shows "printer is offline".  Any clues?

    Hello Betty7,
    Please let me take a moment to say "Welcome" to the HP Forums.
    I hope you enjoy your experience!
    I see that you are having an issue with getting the printer reinstalled. 
    I suggest that we start off by running the HP Print and Scan Doctor.  If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

    My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
    Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
    How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

    Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
    I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
    Thanks in advance!
    Allen

  • Macbook pro charger not working sometimes

    Sometimes my macbook pro would not work.. but then other times it would work.. I don't know what's going on and what to do to fix it. My charger also started to be like this today.. on my 1 year anniversary with this macbook -_- Any solutions to?

    Do a SMC Reset and follow the Magsafe links here
     Cheat sheet to help diagnose and fix your Mac
    Backup your data!
     Most commonly used backup methods explained

  • The sound on my Macbook Pro does not work.

    The sound on my Macbook Pro does not work.  When we press the volume buttons, the sound icon pops up, but the bar is full with a small "Does not work" circle below it, and nothing happens when I hit volume up or done.  I went into system preferences, but there aren't any options there that I can see to change it. 

    "Unfortunately, it doesn't provide any help for a MacBook Pro, other than indicating to call Apple Support" (sic).
    Au contraire. TS1574's title and affected products are thusly:
    "Troubleshooting issues with no audio from built-in speakers on Macs
    Products Affected Mac mini, MacBook, MacBook Pro, iMac"
    As a result, the instructions of the article are relevant. To be sure, follow those steps, the last of which is to contact Apple.
    So, by way of reminder, here are the steps to troubleshoot the audio on your MacBook Pro. There is no red light, so the port is likely fine. Headphones work, so clearly your sound card is fine.
    1. Ensure an incorrect version of OS X is not installed. If one is, then reinstall or erase/install after backing up your data.
    2. Remove any external audio devices from USB, firewire, etc.
    3. Open Sys Prefs > Sound > Output
    If Internal Speakers is listed, select it and test again.
    If Digital Out is listed, confirm again that all external audio devices and cables have been removed.
    If mute is selected, unselect it.
    If the volume slider is low, raise the volume.
    If the above simply doesn't fix it, the issue may be a corrupted plist. Apple Support might be able to help troubleshoot the issue further, per the last step of TS1574.
    I hope it gets resolved for you. Good luck.

  • ICloud sync with MacBook Pro does not work

    I've installed iOS 5, updated Lion to 10.7.2, marked Calendar and Contacts sync in System settings for iCloud on my Mac. However iCal and Address Book sync between iCloud and Mac (MacBook Pro) does not work though there is no problem in syncing between iCloud and iPhone. Whether I create new event or contact, change existing one or delete existing one in iCloud this change is not reflected on my Mac and vise versa. I could not find a solution in this site or in forums.

    Yep, worked for me, too and now contacts and calendar seem to be syncing perfectly.  We'll see if it lasts.
    Thanks for your answer.

  • IMessage (Macbook pro) suddenly not working!?

    My imessage from my macbook pro is not working! When I send a message, it automatically displays a red exclamation point and the name of the person I am sending it to turns red. When I click on that it tells me that their number is not registered with imessage! I've sent imessages before (today even) and I don't know what happened. I think I may have messed with some preferences because I was trying to change security preferences, but maybe I accidentally clicked something I shouldn't have? I know it is me because I get the same error for every person I try to message. It works from my phone, though.

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
    Step 3
    Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
    Step 4
    From the menu bar, select
     ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 5
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 6
    From the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 7
    Select from the menu bar
     ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
    Block all sites from storing information on this computer
    Close the preference pane.
    Step 8
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" in the name. Log out and log back in.
    Step 9
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 10
    Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
    Step 11
    Reset the NVRAM.
    Step 12
    Reinstall OS X.
    Step 13
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Maybe you are looking for

  • How do I stop contacts updating across two phones?

    Hi This is my first post, so please treat me gently My partner and me have both just got 3g iphones, we love them but have one slight prob with them. When we connect our phones to our itunes account, contact details from both phones are replaced with

  • 2 different reactions in the BPEL console under 'Sensorwerte'

    A) After looking the same BPEL instance I get 2 different outputs : a) f.i. things like sensor definitions : SensorAction_ASV_Entw      Aktiviert?      Namen veröffentlichen      Typ der Veröffentlichung      Ziel der Veröffentlichung      Sensoren  

  • Data page

    I am using a data page to populate information on several forms. Is there a way to link the data page to the other forms without the data page being saved with other documents

  • Wanted to change the Exchange rate while saving the PO

    Hi, I have a requirement that i have to change the value of Exchange rate while saving the PO. Even i checked with more BADI's. but i am not able to update the new value. Can you tell me any specific user exits available for this. Thanks in Advance,

  • How do I merge places in Aperture

    I'm going through my places list in Aperture and I've noticed a lot of dupes, don't know how that happened, must be when I imported from iPhoto. Anyway, how can I merge several places into one?  I don't want to lose all that location information.