Hi no none of my other data services are working normally and when I try to send my picture messages it says not delivered and tells me it's unable to send.

Hi no none of my other data services are working normally and when I try to send my picture messages it says not delivered and tells me it's unable to send.

Hello Joe,
I found a few resources you can use to troubleshoot the iMessage issues you are experiencing. 
I recommend reviewing this article first:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
If your Apple ID is activated in the Messages Settings and you still cannot send and receive iMessages, I recommend following the steps in the section titled "If you still can't send or receive iMessages" in the following article:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • HT201412 We are experience ipad issues.  All our other electronic devices are working: computers and iphones

    We have two ipad2 products.  One is one wi-fi and the other has ATT 3G and wi-fi options.  Neither of these will access the internet or email.  They both just "look" nonstop.  We also have two computers and one iphone.  These products are working just fine.  Any suggestions on what to do to get these working?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • ITunes match does not work on my iPhone 4S, but is working across all of my other Macs and iOS devices.  All other iCloud services are working fine on the 4S - any suggestions?

    iTunes match is not working on my iPhone 4S; it works awesome across all of my Macs and other iOS devices (iPad 2, iPod Touch 4g x 2, and my wife's iPhone 4).  Any suggestions?  Thanks!

    It is not possible to "toggle back and forth" at will. If you associate a device with an Apple ID and you have iTunes Match enabled you must wait 90 days before you can associate it with another Apple ID. See this Apple KB article for more information: http://support.apple.com/kb/HT4627

  • When I try to install iTunes a message that says, "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systems services." I already tried to run as administrator. What do I do?

    Like I said, I already tried to run it as an administrator with no different result.

    Hi LyfsGD!
    Here is an article that can help you troubleshoot this issue with the Apple Mobile Device Service:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I have pictures sorted manually in an album. When I try to print the pictures, they come out sorted by date. What am I doing wrong?

    I have an Album in iPhoto, that the pictures are sorted manually.  When I try to print the pictures in the album, using "contact sheet" it comes out sorted by date. I want it in the order of the Album.  How do I do that?

    Hello Richard,
    in the "Print" dialogue select "Contact Sheet", then press the "Customize" button.
    In the Customize view you can rearrange your images by dragging them around.
    Just a work-around, but I hope this helps.
    Regards
    Léonie

  • After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix?

    After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix? Everything seems to work fine if I connect to wireless, but if I'm not connected to it then nothing is working. My service provider says everything should be working fine, I still have the 3G symbol and full bars.

    Somebody clearly hasn't read the User Guide.
    Basic troubleshooting steps are retart, reset, restore from backup, restore as NEW. 
    If you have tried ALL of these steps and you're still having problems, then you need to bring your phone into Apple for evaluation.

  • Data services stop working after updating to new OS version for Q10

    I am from Qatar, after i updated my device ( Q10 SNQ100-3 ) to new OS ( 10.2.1.537 ), the mobile data services stopped working, but it works everytime I connect to wifi. This is the same with Z10. Please need help.

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive
    2) Reboot
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BT Infinity - "other utility services are in the a...

    Hi
    My postcode (and exchange - Putney) show up as being Fibre enabled.
    I've just moved in so my landline isn't active yet, but using a phone line from a property just round the corner gives the following error message: 
    "FTTC is currently not available on this cabinet due to following reasons:- Sorry other utility services are in the agreed site for your cabinet. We're looking for a new site."
    What does this mean for me? Does it mean another ISP may be available?
    Secondly, if I sign up for ADSL based broadband with BT, can I upgrade to fibre once it becomes available? Would this mean an additional 18month contract?
    Cheers
    Solved!
    Go to Solution.

    Thanks for that
    I did have a look on the Postcode checker, and got the following results: 
    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
    WBC ADSL 2+
    Up to 17
    10 to 19.5
    Available
    ADSL Max
    Up to 7.5
    6.5 to 8
    Available
    WBC Fixed Rate
    2
    Available
    Fixed Rate
    2
    Available
    Other Offerings
    Fibre Multicast
    30-Sep-14
     Is Fibre multicast what I'm looking for?
    Also - does anyone know for sure whether I'd be able to upgrade with BT mid contract to fibre, and whether it would mean another 18month contract?
    Thanks

  • I'm using Mountain Lion, kernel_task and other background service are using an awful lot of my memory my memory.

    I'm using Mountain Lion, kernel_task and other background service are using an awful lot of my memory my memory. I can't run any other programs without the beach ball I can hear the hard drive running like crazy in the background.I have 8GB of memory and everything has worked well until recently.
    I am sort of new at posting let me know what other info I can provide
    Thank you
    Howard

    I was noticing the same today.  I have been running this on my Mac Pro circa early 2008.  At the time I notice some sluggish I had three items using over 5 GB of real memory.  kernal_task, iTunes, and Safari.  I did a formal "quit" for iTunes & Safari which reduced the memory down (iTunes was 1.3GB and Safari was 2.0GB).  Here is a screen capture of what is right now.  The kernel_task is at 2.01GB.
    At time of this screen capture my uptime has been:
    up 4 days, 23:37, 2 users, load averages: 1.56 1.70 2.04
    The specs of the Mac Pro is with a lot of hard drive space on the boot drive (50% free) which is mostly my main account user data.  Applications files and other data is actually on a second drive which is also at 50%.  Drive 3 & Drive 4 are RAID 0 used for Time Machine.  RAM is 32GB as the picture denotes.
    I have a MacBook Pro (circa 2011), iMac 27" i7 (circa 2009), and Mac Mini (circa 2010) which don't have any large kernal memory usage.
    Thank you in advance...

  • When I try to send a link to a page from Safari, I get a message saying that sending the message to the server failed.  It places a copy in the outbox.  All other email and safari functions work properly.  Ipad 2 IOS 7.1

    My Ipad2 works fine except when I try to email myself a link to a safari webpage.  I get an error message saying that the message failed to connect to the server.  It says that a copy of the message has been left in the outbox.  I cannot get the message from the outbox.  All other email and safari functions work as expected.
    I have cleared data and cookies, powered down, and done a reset.  Nothing seems to help.

    Typing in additional text seems to get the job done.  This seems to be a feature of the latest IOS update, I have never had the problem before the last update.
    I use the box with the arrow just to the left of the URL block at the top of the page to send myself links to pages of interest.  Adding the extra text seems like a pointless step, but it does work.
    Thanks.

  • Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • I need to disable Match Services - but my iTunes crashes when I try to load it. How do I get Apple Support to disable it on my behalf?

    I need to disable Match Services - but my iTunes crashes when I try to load it. How do I get Apple Support to disable it on my behalf?

    Hi axostech!
    Here is an article that will help you troubleshoot this issue with your iTunes crashes so that you can adjust your iTunes Match settings as you desire:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
    Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
    Good luck.
    Russ

  • HT1766 I just restored my old iphone data to my new phone. When I tried to send an email, it kept asking me for my email password. I couldn't remember it and kept trying over and over. Now email wont send and I keep getting a Cannot Send Mail:

    I restored my phone data onto my new phone. When I tried to send email it asked me for my email password, which I couldn't remember. Now I keep getting an error message whenever I try to send an email. How do I reset this so it works?

    Until you can enter that password it kept asking for, you won't be able to send mail. You need to go to Settings>Mail, Contacts, Calendars>Email Account you are referring to>SMTP server, and make changes there. If you cannot remember your email password, you will have to get in touch with your provider to be able to change it.

  • I have my ipod attached to an old, out of date email and when i try to update from my ipod it says "your itunes store password is incorrect"  Any ideas why/how to fix?

    i have my ipod attached to an old, out of date email and when i try to update from my ipod it says "your itunes store password is incorrect"  Any ideas why/how to fix?

    Try from a computer.   You may have to reset your password.  If you can't get the comfirmation email then you can use the secret question.  Once you can log in then you change the the email address.
    See:
    Frequently Asked Questions About Apple ID
    Here is how to contact iTunes:
    Apple - Support - iTunes - Contact Us

Maybe you are looking for