Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Satellite M40- after BIOS update sound doesnt work anymore

    After i was update my Toshiba M40 (ATI) from default bios to version 1.5, my sound card (audio) was disabled...
    I can't use audio - after reinstall of drivers - it's found a new hardware - but say - is broken...
    What's up?

    Hello polewiak
    I am a little bit confused with your BIOS update. I have checked the Toshiba download page and there are updates available but you must be careful which one you use.
    Version 1.50 is designed for units with INTEL graphic chip and version 1.20 for units with ATI graphic chip. If I am understood you right you have updated INTEL BIOS version on your ATI unit. Am I right?

  • Plz help me,after instuling the last software update,the programs and games and everything i have download it can't open!

    plz help me,after instuling the last software update,the programs and games and everything i have download it can't open!

    Have you tried the basics from the manual?
    restart, reset, restore.
    iPod touch User Guide (For iOS 4.3 Software)

  • I can't activate windows 8.1 pre-instal​led on my Toshiba E45-B4200 after BIOS Update

    I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
    Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
    I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
    Now I can`t update Windows, Office 2013, and so on. 
    I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
    I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

    It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
    - Peter

  • Problem in booting after bios update

    Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

    see help 8....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

    Hi.
    Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
    bios-20070709111839.zip
    After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
    I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
    What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
    Thanks in advance
    MAT

    > Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
    What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
    You could try to access the BIOS and try to set the settings to default.
    Dont forget to save the settings if you will exit the BIOS.
    But if this procedure does not help, you will have to contact the ASP in your country.
    Possibly the guys will try to flash the BIOS again with other special version.
    Good luck
    Greetings

  • HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

    After bios update my desktop runs so painfully slow it is unworkable.  Disk drive seems to be constantly hammered by processes that don't appear on task manager.  Running 64 bit windows 7 (sp1).  Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support.  Ideally would like to get previous version of bios as machine was running well before update. 

    I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
    the BIODHD-8 error code means your harddrive is failing and must be replaced.
    Back up everything that you possibly can before it fails and no longer boots up into Windows .
    is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty) 
    HP notebook warranty status check website
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

  • Satellite L650-1KR PSK1JE - dead after BIOS update

    As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
    I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
    My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
    Of course my warranty is already over... :-(
    Please help!
    Thank you in advance...
    lichtimc

    Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
    In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

  • After BIOS update Satellite L350-172 doesn't start anymore

    Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
    I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
    "It was stopped for reason not to damage the Computer" - blue schreen.
    How can I downgrade the bios again? Or - what have I to change in the bios-settings?

    Hi schuwe,
    Im a little bit confused about your posting. How do you tell your BIOS not to restart?
    Anyway, after BIOS update you should load the default settings in BIOS.
    Did you choose the right BIOS especially for your model?

  • Hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.

    hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.

    Are you sure it's a 3GS? What is the model number?

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

  • Satellite Pro L300: BSOD after BIOS update

    Hi
    after update the Bios of Satellite Pro L300, the windows not start!
    Its show the blue dead screen!
    What can i do?

    Hi
    Are you able to access the BIOS settings?
    Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
    Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
    But if the SATA drivers are not included the SATA mode should be set to compatible.
    Please check this!
    Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

  • After bios update, my window media player got hang and headphone clarity is not proper

    HP Pavilion g6  after bios update, my window media player  got hang and headphone clarity is not proper

    Hello mathewstays,
    Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • After bios update side nomberpad is not workinh keys from 0-9

    after bios update side nomberpad is not workinh keys from 0-9

    Hello jay04,
    Welcome to the HP Forums!
    I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Thanks!
    Mario
    I worked on behalf of HP.

Maybe you are looking for

  • 2011 MBP display went black

    My 15" MBP was bought last month. I started up my MBP this morning I heard the machine running sound and saw the power light turned on. However, the screen was totally black till loaded to the login page. I forced to shut down by pressing the power b

  • Copy and Paste or Restore State

    Hi everyone, I'm very new to the Acrobat API so please be gentle. I am writing a plugin that after saving a PDF document, the file is uploaded to a DMS. For reasons I won't go into here the document has to be closed for certain operations to be perfo

  • How to Import Multiple Image Sequences into - Premiere 'Pro'

    Hi ;-) 1) I added a bug report about this 4 years ago  -- Is this STILL not possible ;-)))) I have 200 Sequences sitting each in its own folder. As of now - then year of the Lord 2014, I have to physically select each folder and add them one by one..

  • Flash Player in Acrobat Pro?

    Hi there, I have very carefully installed (and uninstalled... and installed...) the latest flash player on my computer. I am also running Adobe Design Premium CS4. I note the flash player doesn't appear in the list of players in my acrobat settings.

  • Drag and Drop fom windowsexplorer

    Hi all we are in need of a functionality where in files from the windows explorer of windows OS has to be dragged and dropped in javafx application.I got a code which works fine in Java. It uses DropTarget, Transferable and DataFlavor classes. If any