Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size
Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?
The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.
Similar Messages
-
I would like to know the list of possible output (export) file codec from FCP X. For example, can I export in FLV format? Where do I find the list, which gives me all the details about it? Or is there only one output codec? Thanks
That's an excellent analogy. While FCP cannot export FLV. It is possible to do a very simple substitution. If you export a QuickTime movie using the .mov suffix with the H.264 codec, you can change it to FLV simply by changing the suffix to .flv. This is an acceptable format for Flash movies on most web sites, if that's where you're trying to go.
-
When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich?
The reason your applications do not work in Lion/Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006. When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
So you do not have to accept recriminations from others for previously using Rosetta without even knowing it was present and running!
So for those of use that need to upgrade to Lion/Mountain Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
[click on images to enlarge]
And now Mountain Lion:
If you are unable or unwilling to update your inventory of PowerPC software, this solution offers you an alternative for not more than the $29 cost of Snow Leopard and $79 cost of Parallels (cheaper via internet sources).
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439
Assistance with the installation process is available on this linked forum. -
Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them.
Notice how in the photo, I can't identify which MS office document I would like to switch too. Perhaps since the Dashboard and Desktop windows are at the top of my screen now Apple doesn't let you have all the applications take up the full screen and be sized individually so that you can have a better idea on what to pick.
I like the idea of grouping to an extent... If you have a bunch of random things it was hard for me to decifer between what was safari, chrome, or word. But now that they grouped them like this, if you have multiple pages of one program running, you can't switch between those pages easily like before.If I wanted to open any of my Applework documents I had to open them one at a time and resave them with pages. This could take weeks.I have 1000s of apple work documents.
You don't have to open and re-save every AppleWorks document you have right now. Just wait till you need one, then do it. The documents aren't going anywhere.
Am I dealing with Microsoft? This was a BIG surprise to me that Apple would release an OS without testing all programs.
Frankly, it is not Apple's responsibility to ensure compatibiltiy with every piece of software available for OS X. That is the responsibility of the software vendor. Lion has been available to developers for several months before it's release, so Microtek had plenty of time to update their software. Yet they did not. How is that Apple's fault? I think Apple was very generous to give you a refund for Lion.
I'm not trying to belittle your frustration but I do think your ire is misplaced. -
Whenever I open a file in Lion, other files of the same sort that I opened previously automatically open up. For example, if I open a .jpg file, numerous other .jpg files that I opened previously in the day open up. How do I close these files to prevent them from showing up again, like in previous versions?
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it. -
iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen
Did anything happen to prior to your phone acting this way? It sounds like your screen is dead, but it is hard to say without knowing what what the cause.
1) was this a gradual problem? Did the phone screen start dimming a couple months ago and now has degraded or after some event (known or unknown to you), the phone started behaving this way.
2) Can you give more specifics on the problem? You said you have a black screen, but also you can see what you're doing on screen. Is the screen just really dim? Is the screen completely black? Does anything else besides attempting to reset the device cause it to flash white? -
I would like to put a video in an other video,but the video (if want to inscrust for example in an IPad screen on this video) will follow, in 3D and automatically the moves of the IPad (here). I remember I found 2 months ago a plugins on the Internet but I can not anymore find it. Who can help me? Thanks
I think you might mean Slice X. I think it has a motion tracker.
-
Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked.
Any advice?
Thanks.
Alex.Cannot figure out what your talking about since it makes no sense.
If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
You must log in with your cell number and your my Verizon portal password. Not the account pin.
Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
If you don't have the information then there is nothing they can do.
If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
Good Luck -
I've changed my apple id password, however icloud still only accepting my old password. (though to sign in here, for example, it only accepted my new one). My Mac was stolen and I really wanted icloud to be safe! How do I get this sorted?
Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account") -
Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?
I guess you mean one of the resume templates.
What "format" have you saved your finished resume in?
The only formats a Windows user will be able to open are .doc (Word), .pdf and rtf. The 1st 2 are usually the best.
There is no Windows version of Pages.
Peter -
Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed
The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212 -
We have recently started using ID CC 2014 and recently have been having Crashing issues stating the network connection was lost. Anyone else having this issue?
I will try that.
This is a copy of the error we are getting -
pls excuse my bad english. Keyboard and track pad are freezing up for example while watching a movie., pls excuse my bad english. Keyboard and track pad are freezing up for example while watching a movie.
I think it is also done by edwardquan:/discussions/board/message?board.id=smartphones&message.id=52200&query.id=227350#M52200
Two reviews two thumbs up!!!! -
My phone keeps saying the storage is full so I deleted pictures, apps, and all my texts. Then after I do this my phone freezes and I have to restart it. When I restart my phone then everything I deleted comes back. What is going on?
HI Shelby,
It sounds like your available free space is not reporting properly. I would start by quitting the Settings app:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes, then restore it as new and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Regards,
Sterling
Maybe you are looking for
-
Hi, I have created a LSMW for updating sales office in the Sales order by using Direct input method. While specify files;I specified the file saved in the Desktop.While saving I get an error saying 'Logical path is not specified'. Can anyone tell me
-
Insert into Oracle Database using C#
Hi Everyone, I am trying to take data from text box and list box and then insert them to Oracle database: Text box data: Oracle = EMPLOYEE_NAME C# = tbEmployeeName List box data: Oracle = EMPLOYEE_GENDER C# = lbEmployeeGender Here is my code in C#, c
-
Problem in importing MPEG4 video
When I import mpeg4 video using Element 8 I only see the clip as red. I do hear the sound but no video. Any suggestion on how to fix this. Thanks.
-
Can you edit or remove from reading list in Safari?
Can you edit or remove from reading list in Safari?
-
Iphoto unexpectedly quits upon launch.
I try to open up iphoto and it immediately tells me it has unexpectedly quit. I feel like I have tried everything to get it to work. I am not very great with computers though. Does anyone have any tricks up their sleeve? Thanks