Hi, what's the best way to replace IMAC 27'' glass when broken (latest Imac generation from end 2012) ?  Thanks,

Hi, what's the best way to replace IMAC 27'' glass when broken (latest Imac generation from end 2012) ?  Thanks,

Not sure about the 2012 models but the 2010 ones can be removed in seconds, using a suction cup on the top corner. I use my tomtom to lift it away. It is attached by magnets.
Hope this helps.

Similar Messages

  • What's the best way to replace front glass on an iPhone 4?

    My grandson has a 4 and has cracked the front glass. Trying to find the best cost effective way to replace the glass.

    i don\'t want an alias!! wrote:
    What's the best way to replace front glass on an iPhone 4?
    Take it to an Apple Store for out of warranty exchange fro $149.
    This way you get a refurb iPhone including new battery.
    See this -> http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5s, iPhone 5c,
    iPhone 5
    $269
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149

  • What is the best way to replace the Inline Views for better performance ?

    Hi,
    I am using Oracle 9i ,
    What is the best way to replace the Inline Views for better performance. I see there are lot of performance lacking with Inline views in my queries.
    Please suggest.
    Raj

    WITH plus /*+ MATERIALIZE */ hint can do good to you.
    see below the test case.
    SQL> create table hx_my_tbl as select level id, 'karthick' name from dual connect by level <= 5
    2 /
    Table created.
    SQL> insert into hx_my_tbl select level id, 'vimal' name from dual connect by level <= 5
    2 /
    5 rows created.
    SQL> create index hx_my_tbl_idx on hx_my_tbl(id)
    2 /
    Index created.
    SQL> commit;
    Commit complete.
    SQL> exec dbms_stats.gather_table_stats(user,'hx_my_tbl',cascade=>true)
    PL/SQL procedure successfully completed.
    Now this a normal inline view
    SQL> select a.id, b.id, a.name, b.name
    2 from (select id, name from hx_my_tbl where id = 1) a,
    3 (select id, name from hx_my_tbl where id = 1) b
    4 where a.id = b.id
    5 and a.name <> b.name
    6 /
    Execution Plan
    0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=7 Card=2 Bytes=48)
    1 0 HASH JOIN (Cost=7 Card=2 Bytes=48)
    2 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
    3 2 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
    4 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
    5 4 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
    Now i use the with with the materialize hint
    SQL> with my_view as (select /*+ MATERIALIZE */ id, name from hx_my_tbl where id = 1)
    2 select a.id, b.id, a.name, b.name
    3 from my_view a,
    4 my_view b
    5 where a.id = b.id
    6 and a.name <> b.name
    7 /
    Execution Plan
    0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=1 Bytes=46)
    1 0 TEMP TABLE TRANSFORMATION
    2 1 LOAD AS SELECT
    3 2 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
    4 3 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
    5 1 HASH JOIN (Cost=5 Card=1 Bytes=46)
    6 5 VIEW (Cost=2 Card=2 Bytes=46)
    7 6 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
    8 5 VIEW (Cost=2 Card=2 Bytes=46)
    9 8 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
    here you can see the table is accessed only once then only the result set generated by the WITH is accessed.
    Thanks,
    Karthick.

  • What's the best way to replace a 60 W Mag Safe Power Adapter?

    What's the best way to replace a 60 W Mag Safe Power Adapter for a Macbook Pro?

    Buy one from Apple!!

  • V11, What is the best way to replace ImportSecurity.cmd

    Hello,
    I've migrated my essbase/planning server from 9.3.1 to V11.1.1.2.
    I previously used ImportSecurity.cmd to load security on members of outlines and on data forms in Planning. But now it seems that ImportSecurity.cmd is no more available in V11 (or I may have forgot to install / configure something ??).
    So what is the best way to load security automatically now in V11 ?
    Thanks for your help
    Regards

    Hi,
    You can use LCM (Lifecycle management now)
    Have a look at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_lifecycle_management_11111/launch.htm
    Or have a read [here |http://john-goodwin.blogspot.com/2008/08/so-whats-this-life-cycle-management-all.html] for an overview.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to migrate What is the best way to connectold iMac to new iMac

    What is the best way to connect a 2006 iMac to a 2013 iMac? ( Lion to Mountain Lion )
    I have a TM on the older Mac. I understand using set-up is best. I cannot afford to lose
    Any data.
    Thanks.
    OGT

    By Firewire. However, you will need a Thunderbolt to Firewire adaptor from Apple to use on your new iMac.
    See Target Disk Mode.

  • I downloaded a job application with Adobe.  What is your suggestion on editing it?  What is the best way on my iMac?

    I downloaded a job application with Adobe.  What is your suggestion on editing this?  What is the best way or best program?  Thanks!

    Simply, export the data from this esy share system to standard formats like jpeg, making sure to preserve all metadata on the way. How to do that? YOu'll need to post on a Kodak forum I'm afraid.
    Then copy the files to the Mac and import them.
    Regards
    TD

  • What is the best way to display errors to users when using JSPs?

              Hello,
              Could someone suggest me the best way to display errors to users when using JSPs?
              Many thanks in advance.
              Rino
              

              Thanks for the code snippet!
              Rino
              "Deepak Vohra" <[email protected]> wrote:
              >
              >
              >The 'errorPage' attribute of the 'page' directive forwards uncaught run-time
              >exceptions
              >to an error processing page. For example:
              >
              ><%@ page errorPage="error.jsp" %>
              >
              >redirects the browser to the JSP page error.jsp if an uncaught exception
              >is encountered.
              >
              >
              >Within error.jsp, indicate that it is an error-processing page, via the
              >directive:
              >
              >
              >
              ><%@ page isErrorPage="true" %>
              >
              >The Throwable object describing the exception may be accessed within
              >the error
              >page via the 'exception' implicit object.
              >
              >
              ><% if (exception != null) { %>
              ><p> An exception was thrown: <b> <%= exception %>
              >
              ><p> With the following stack trace:
              ><pre>
              >
              ><%
              > ByteArrayOutputStream ostr = new ByteArrayOutputStream();
              > exception.printStackTrace(new PrintStream(ostr));
              > out.print(ostr);
              >%>
              ></pre>
              >
              >
              >
              >"Rino Srivastava" <[email protected]> wrote:
              >>
              >>Hello,
              >>
              >>Could someone suggest me the best way to display errors to users when
              >>using JSPs?
              >>
              >>Many thanks in advance.
              >>
              >>Rino
              >
              

  • What is the best way of replacing words in a text file ?

    i want to read in a text file and when i come across a certain word, i want to change it to something else. Whats the best way to do this ?
    If i read in a line at a time, how would i only replace one word and not the rest of the line ?
    thanks

    thanks it works !!! But i wrote the contents to a new file.
    How do i overwrite the same file ? I put the the input and output file as the same location but it overwrites the original file with a blank one.
    i guess i have to write into another buffer and read all lines first before overwriting the file right ? how should i do that ?
    also, i only want to overwrite the file ONLY if applies replaceAll method, otherwise if no replacing takes place i dont want to keep updating the file everytime.

  • What is the best compressor setting to use ... when exporting a 720p timeline from FCP for a project that will only be played back in a standard def monitor?

    What is the best compressor setting to use for DVD StudioPro ... when exporting a 720p 30 timeline from FCP for a project that will only be viewed in a standard def monitor?

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • After finally completing  a clean install what is the BEST way to replace my data.

    Please understand I moved from PC to Mac in Late 2011. Unlike windows where you have to know how it all works to use it, Mac is so simple I, to my own detriment , did not take the time to learn more than just my daily use. Been busy moving country and other crazy life stuff. I am rectifying this mistake. I did have issue with the clean install process working through with out interruption, some file issue, so had to repeat a few times.
    1. completed a clean install through to completion of set up, new account etc. Machine runs amazingly better. Completed updates. Knowing Migration Assistant can deal with duplicate user issues.
    Q? Do I need to run disk repair or other.
    2. Thought myself ill equipped with knowledge and understanding to manually replace my data via finder. I simply do not know where things are supposed to go.
    3. Tried reinstall of everything thru set up but it installed everything including all the issues I had before. Went through clean install process again.
    4. With this in mind I am hesitant and very weary to use Migration Assistant to move everything back as I simply do Not know where the issue lies even if it allowed greater folder & file separation.
    I have got to the stage where I am ready to recover my data which is on my backup external hard drive. The data was recovered using Time Machine.
    I wish to do what is best for my machine. It is getting older and I wish to do what I can for its longevity.
    Q? So what data is best recovered in which way and in what order.
    5. Is it best to say do recover applications from App Store and redo all updates if required.
    Then install non app store apps, e.g. Microsoft office for mac, and others thru finder.
    Users thru Migration assistant  etc etc.
    Been learning and working on this since my last post. Lots of watching YouTube and reading for hours.
    So much conflicting opinions and maybe this is due to my lack of specifics and most posts are for general use so I do understand.
    Again thank you in advance. I still think Mac has it all over PC.

    I read thru the data migration one below however wasn't sure of its applicability given it was from 09.
    Re: 2. there seems to be data I have yet to bring across. How important it is I don't know. What exactly it is I also am yet to find out. Will proceed with the downloading n stuff.
    Thank you for your help on this.

  • What is the best way to replace a cracked screen for the MacBook Pro?

    My MacBook Pro was accidentally droped and the screen was cracked.  Need to find out what is the most effecient way to replace the screen?

    Contact your nearest Authorized Apple Service Provider and ask them about the costs.
    MacBook Pro - Contact Support - Apple Support

  • What is the best way to disable tags in SVE when a OPC server is not available?

    I have a LV2009 DSC app with SVE that reads tags (1100 spread acrross them) from 4 PLC's through NI OPC server.  From time to time the PLC will lose power because that test machine will be powered down.  The NI OPC  loses the OPC link then to that particular machine/PLC and this error is transferred through to the SVE. 
    Is there an any/efficient way to stop the reading of tags if/when this happens?  The only way I can think of is to undeploy/re-deploy from the app when it is necessary. 
    In the same way is it possible to prevent the SVE acting on this error?
    I also have a longstanding problem with updates of tag values to the frontend of the LV VI.  The update rate into SVE seems OK, but the tag values are slow to update onto the page.  I have reduced the amount of tags on the pages as well as reducing the amount of code on a page.  It becomes better, but I would like to have an update of less than 2 seconds at least to properly display plant status.  I'm running a heartbeat timer from a PLC and in some cases this takes up to 15 seconds to update.
    Any assistance will be appreciated.
    Pierre

    PierreN,
    In order to set the timeout value of a Shared Variable, you may Right-Click, and select 'Show Timeout':
    Implementing Timeouts through your application variables will allow you to gage which variables are, and are not updating. This troubleshooting stepp will allow you to better characterize the source of the slowed update rate. You also may take a closer look at the OPC Server configuration, and the deadnband settings you have implemented on the I/O Clients. 
    Snowforest has offered good advice in terms of implementing a State-Machine architecture to handle the 'Power Down' system status. Also, if you know the specific error that is propagated, you may choose to implement implicit error handling using the data contained in the Error Cluster.
    Cheers,
    Pcorcs
    Patrick Corcoran
    Application Engineering Specialist | Control
    National Instruments

  • What's the best way to replace iPod Nano 1st Generation?

    I have two iPod Nano 1st Generations. One from 2005 and one from 2006. The one from 2005 just works when it feels like it. Sometimes it works and most of the time it doesn't. And the one from 2006 recently exploded when it was charging. A silver bag (I'm assuming the battery) expanded and ripped the iPod apart breaking the plastic around the scroller.
    Should I use that replacement program (I heard it didn't work for some) or can I just bring them to an Apple Store to replace them?

    See if either qualifes under the 1G Nano recall.
    http://www.apple.com/support/ipodnano_replacement/
    B-rock

  • What is the best way to empty my iPhoto trash when there are more than 1,700 photos in it?

    I never realized there was a Trash in iPhoto.  Fortunately, I was reading a discussion on another iPhoto topic, and read that emptying iPhoto trash with more than 100 photos in it may mess up the database.  Any suggestions for how to delete 1,7000+ photos from the iPhoto trash?

    Make sure you have a good backup and then right click and empty trash.
    If the database gets corrupted, you can hold CMD OPT while clicking on iPhoto in the dock and get the options to rebuild.
    Regards,
    Captfred

Maybe you are looking for