Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from

Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from LR or my drive, I keep getting the message; "Disk burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone may know if there's anything I can do. Or could it be that my computer just can't handle it? Help!!! So frustrating!!  I have a PC Lenovo computer, I don't know if this makes any difference. Any ideas? Thanks so much for your help!!!

Have you burned Discs with other programs using this computer? Are you certain that you have a drive that will burn discs?

Similar Messages

  • Help! Error 36 When I try and copy files to my external drive

    Yesterday morning I discovered that I can't copy files from my desktop to my external hard-drive. The last time I performed this action was Saturday afternoon were all worked as normal, and to the best of my knowledge I've changed nothing on my system since then.
    When I try to drag a file from the desktop to a folder on the external drive I get the message
    The Finder can’t complete the operation because some data in “X” can’t be read or written. (Error code -36)
    The external drive is the drive I use for my iTunes music files, and I've discovered this morning that I cannot import a CD to iTunes, however I can burn a playlist from iTunes to a CDr.
    I'm using an iMac, and the external drive is a Western Digital 1TB (Journaled HFS+) connected via firewire.
    I've seen references to similar issues through Google searches, but no definitive answer, can anyone help?

    I/O error -36 bummers!
    It could mean that there are bad blocks on the disk. Backup everything on that external disk now, if you don't already have it. Unmount and disconnect the external. A -36 error could also be just a poorly connected cable, or a bad cable or port. Remove all cables and reconnect making sure the connections are tight.
    -mj

  • Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for months with no problems.

    Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for several months with no problems.

    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

    I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

    TDFields you will want to ensure the 7z and exe file are in the same folder/directory.  You can find more details at Find a download link on Adobe.com.

  • I have a question when I try to authorize my daughters ipod to itunes on a new computer it pulls up a email addresse I do not know and will not transfer her music is there any way to fix this Thanks in advance

    When trying to authorize my daughtes ipod classic to a new laptop it pops up and asks for apple id but  the email is not one of ours and  it will not let me change it is there any way to fix this problem Thanks in advance

    To whom does the email address belong to? Are you sure it wasn't an email address used in the past or perhaps one that had belonged to a friend of hers?
    Either way, if the music on her iPod was purchased under an account not belonging to her or you, there is much you can do. Sorry.
    B-rock

  • HT4623 i am an iphone user and i just tried to download theiso6 to my phone and now i can not get no service to my phone. i only can get a message that tells me to connect to itunes too activate but when i try that it says that i have no service.i am a si

    i need help with my iphone activation. after installing ios6 i can not use my phone. it says no service i use a sim card from the bahamas please tell me how i can get this problem solved

    Has your iPhone been jailbroken or modified to work with
    other than the original wireless carrier?

  • I am having trouble with the updates to firefox. Each time I start it I get a page that says proxy server refusing connections and have to reinstall the old version just to use the internet. That also removes the personas from my browser.

    I currently have version 3.0.10 and have gotten two prompts to upgrade my version of firefox and each time I do install the new version and then try to start up Firefox, I get a page instead that says proxy server is refusing connections and the only way to browse is to re-install the old version. I also have to re-install the old version at least 3 times before I can use Personas.

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
    See "Firefox connection settings" in [[Server not found]]
    You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
    If you do not need to use a proxy to connect to internet then select No Proxy

  • With the last two updates and downloads of iTunes, it no longer works on my PC.  I have tried removing and re-installing and I have tried the repair offered with download.  When I open iTunes, I get notice that iTunes has stopped working.

    iTunes has stopped working on my PC with latest updates.

    Well, I guess I have to download some other software to make my apple product work. Really great stuff you guys sell. I will never buy another apple product. My Iphone, Ipod and Itunes are junk

  • InDesign CS6 crashes when I try to copy a graphic

    I am working in CS6 with a document that was converted from CS4. I want to move a graphic from one spot in the document to another, but when I try to copy it, InDesign immediately crashes. Has anyone else had this problem?
    I am working on a PC, and I believe the original file was created on a Mac.

    It turns out the culprit was a bad font in the image. I opened the image in Illustrator and converted the font to outlines. That solved the problem! Incidentally, this one image/font problem (this image is used in a couple different manuals) also was causing InDesign to crash when I exported to PDF.
    Adobe people, if you read this, it would be great if problematic fonts in images were detected by InDesign, like an error in the preflight panel similar to the linking and font errors currently there. I can't see a way to detect this easily now (how to narrow down which image is a problem when working with 50+ images in a document?) Is there a way that I don't know about?

  • Is it possible to run my iTunes solely from an external drive?

    I'm a college student and don't have my own computer anymore, and I currently use campus computers and library computers (No admin priviledges).
    I currently have all my previous iTunes music backed up on my external drive, and I have the iTunes package (The install package you download from Apple) also on there as well.
    I'm basically wondering if I can install iTunes onto my external drive, open it from there, and also be able to access my music from there as well?
    To give more clarification, I want to be able to go to a college or library computer (These computers are running on Windows XP or 7), be able to open iTunes from my external drive, and be able to manage and use my library from there.
    With college and library computers, you don't have the admin rights to install iTunes. However, I do have friends that will let me use their computer to install iTunes onto my external drive (If that is possible). So not being able to install iTunes because of lack of admin priviledges is a barrier I can get through.
    How ever I don't know if it's possible to run, and open iTunes from an external drive, and be able to open and use my iTunes library from there.
    And help would be great.
    Thanks in advance!

    how would I go about putting my iTunes library on an external drive?
    It depends on where your library is now and how it's organized. If you have all your content and library files in a single iTunes folder, drag the entire iTunes folder (the _entire_ folder, _not_ just the iTunes Music folder) to your desired location. Then hold down the Shift key while launching iTunes. You'll be given a dialog box where you can select the iTunes library you want to use. Navigate to and select the iTunes folder in it's new location. Note that this procedure assumes that all of your tracks are contained in the iTunes Music folder. If they're scattered around your volumes, moving them becomes much more complex. Don't delete the tracks from the old location until you've confirmed that they're working correctly from the external drive
    Also is it possible to get past administrator rights, to install iTunes and delete iTunes each time I use a computer that I don't have administrator rights to? That way I can still use iTunes.
    No, it's not possible. As with most applications, you need administrator rights to install iTunes.
    Regards.

  • I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

    I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

    garysm99 wrote:
    Not familiar with structure view. How do I go there?
    click in IDVD on this button

  • When I try to copy files from my computer (just pics) to my iPhone's media folder via Finder under 10.7, I get this error...

    I'm using MacFuse to connect via Finder. It worked before, even on 10.7. But since I cannected th eiPhone to my Windows 7 dual boot partition, now it won't work! Maybe it was just a coincidence, not sure. Just returns this error:
    "The operation can’t be completed because an unexpected error occurred (error code -8003)."
    I get this one when I try to copy files OFF of the iPhone:
    "The operation can’t be completed because an unexpected error occurred (error code -8072)."
    Sounds like a permissions error to me. So I fixed permissions on my Mac with disc utility, but same problem. Then chmod with terminal the media folder. Did nothing. So I can't change permissions, and they're not broken. What could've happened? I'm like, locked out of my device!

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

    My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

    Hi all.  I can’t tell you how to solve your iCloud 3.x issues.  Heck, I don’t think they’re even solvable.
    But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem.  …without even a re-boot.
    Log out of iCloud 3.0 and uninstall it.
    Open My Computer and then open your C:\ drive.  Go to Tools/Folder Options and click on the View tab.  Select the “Show hidden…” radio button and click on OK.
    Open the Users folder.
    Open your user folder
    Open ProgramData (previously hidden folder)
    Open the Apple folder – not the Apple Computer folder.
    Open the Installer Cache folder
    In Details view sort on Name
    Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
    Right click on iCloud64.msi and select Install.
    When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco.  The pictures will be synched to the same Photostream folder as before the “upgrade”.  Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
    I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
    For those of you who hate to go backwards, think of it as attacking to the rear.  Which would you rather have, the frustration of no synching or everything working on an older version?
    Good luck…

  • Error message when I try to copy new files (images, documents) to mac from flash drive/SD card

    I am recieving an error message when I try to copy new files (images, documents) to mac from flash drive/SD card. The message is saying "operation cannot be completed because an item already exists with that name." They are brand new therefore not the same name? I cannot even put them in a brand new folder...  How can I fix this?
    Please help me!

    You don't need to recover the system.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
    dot_clean -m
    Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

Maybe you are looking for

  • How to add text to the carousel images ?

    <%--   Copyright 1997-2010 Day Management AG   Barfuesserplatz 6, 4001 Basel, Switzerland   All Rights Reserved.   This software is the confidential and proprietary information of   Day Management AG, ("Confidential Information"). You shall not   dis

  • Problem i'm facing while trying to open the form builder

    Hi all, I'm facing a small problem while i'm trying to open the form builder via Portal - content management - form builder, i.e., intially a dialogue box statting that : Applet(s) in this HTML page requires a version of java different from the one t

  • Getting a copy of SAP Certificate

    Hi, I received SAP Abap certification way back in 1999. Since then I have worked in different parts of the world and during the course of my journey this certificate has been stolen from my property in South Africa. Is it possible to get a replacemen

  • Popping up Disco portlet in portal?

    Hi folks. This is a Discoverer portlet question for 9iAS. In short, it seems that you can't set a portlet to pop up. (I am not trying to pop up Disco Plus or the Viewer -- I am trying to pop up a portlet specifically. In the tar I've entered at Oracl

  • Return amount of records after query multi-record block

    Hello, I would like to have a restriction in my multi-record form that counts the amount of returning records (after execute_query). If the amount is >= 1000 then I have to raise an error. How can I implement this? Best regards, Ronny.