Hibernate or Stand by fails in WinXP after installing WDM capture driver

Hi, I have an MSI MX440 card with video in and out.  The card works like I expected, games or capturing video works fine.  
I first installed the card on my Windows 2000 machine, about a year ago.  After installing the WDM capture driver it stopped going in Stand by or hibernation mode.
In the beginning of this year I bought a P4 configuration but I did not install the WDM driver.  Some time ago, I gave it another try on this system but since then I can no longer go into hiberation mode or stand by.  The computer says 'Preparing to go standby' and it does not work, it returns to the desktop with another message box 'System not in stand by', 'The WDM Video Capture driver universal device is qt the cause that the computer no longer goes into stand-by, if the problem keeps existing you will need qn updated devicedriver'.
I have currently the Nvidia driver 2.1.20 running, the driver is not digataly signed.

Hi, I have an MSI MX440 card with video in and out.  The card works like I expected, games or capturing video works fine.  
I first installed the card on my Windows 2000 machine, about a year ago.  After installing the WDM capture driver it stopped going in Stand by or hibernation mode.
In the beginning of this year I bought a P4 configuration but I did not install the WDM driver.  Some time ago, I gave it another try on this system but since then I can no longer go into hiberation mode or stand by.  The computer says 'Preparing to go standby' and it does not work, it returns to the desktop with another message box 'System not in stand by', 'The WDM Video Capture driver universal device is qt the cause that the computer no longer goes into stand-by, if the problem keeps existing you will need qn updated devicedriver'.
I have currently the Nvidia driver 2.1.20 running, the driver is not digataly signed.

Similar Messages

  • GF4 Ti4600 Error 10 after installing WDM capture drivers

    Hello everybody,
    Maybe one of you knows a solution for this problem.
    I'm using a MSI-8872 (Ti4600) on an MSI-6367 Nforce motherboard. WinXP pro is the OS. I'm trying to use the video-in  on this videocard. After installing the WDM capturedriver i get an error 10 on this device "device can't start".To be really sure that this isn't an resource conflict i removed all extra hardware (soundcard,firewire,modem) and disabled all integrated peripheralls on the MOBO (serial, parallel ports, LAN audio, modem). After this i did a clean install of WXP detonator 30.84 and WDM 1.16. Still same problem !!!!!!!!!!! Tried also with some other combinations of detonator and WDM but the problem remains.
    Does anybody know:
    1) If this is a more common problem with this videocard (maybe in combination with Nforce chipset)
    2)A solution
    Greetingzzz,
    Foetsjie

    Hello, i have the same problem on WinXP Pro.
    So I tried to use newest vga driver and capture WDM driver 1.08 but the problem is same still.
    Do you  know where i can download last BIOS for my VGA card?
    Thank to all )
    Best regards
    Jiri

  • Safari and app store fail to work after installing Maverick, what can I do?

    Safari and app store fail to work after installing Maverick, what can I do?

    Disk Utility (Applications - Utilities - Disk Utility) Repair Disk Permissions 2x. Then restart in Safe Mode and try both apps. Restart normally and post results.

  • All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

    All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
    Error report as follows
    Process:         Pages [208]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.1 (923)
    Build Info:      Pages-9230000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [93]
    Date/Time:       2012-08-22 12:33:15.909 +0100
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          102101 sec
    Crashes Since Last Report:           11
    Per-App Interval Since Last Report:  2217715 sec
    Per-App Crashes Since Last Report:   4
    Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Symbol not found: _SFAAutosaveUserActivityException
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

    I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
    Process:         Pages [13521]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.3 (1048)
    Build Info:      Pages-10480000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [153]
    User ID:         501
    Date/Time:       2013-03-11 14:57:02.175 -0400
    OS Version:      Mac OS X 10.8.2 (12C3103)
    Report Version:  10
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Reason: image not found
    Binary Images:
        0x1000 -   0x354fe3  com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      0x3ec000 -   0x46bff7  com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    0x8fe3e000 - 0x8fe70e57  dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

  • "low disk space hp_tools" after installing HP external drive

    I have this message displayed "low disk space hp_tools" after installing HP external drive with simple save.  A new drive was created on my internal hard drive and apparently the allotted space is not enough.  How do I get rid of the partition and the error message?

    Install WinDirStat from below link and see whats consuming more space in E:\ drive and post results here with a screenshot 
    http://windirstat.info/wds_current_setup.exe
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Can I get my bookmarks back after installing new hard drive?

    Can I get my bookmarks back after installing new hard drive?

    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    Your old Profile is located here in Vista & Win7: <br />
    ''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

  • NotificationExec pop-up after installing Free Agent Drive Manager

    I've just installed the Free Agent Drive Manager for a Maxtor 4 One Touch. Now I'm getting a NotificationExec pop-up after installing Free Agent Drive Manager. I've trashed the drive manager but I can't seem to get rid of the pop up. Any suggestions?

    Hi Todd,
    That's incompatible software, and from reading other posts, it sounds like even the official uninstaller does not get rid of everything. Do a Spotlight search for file name "NotificationExec" and "Free Agent Drive Manager" and include system and invisible files. Trash the files you find, empty your trash and you should be good to go.

  • MBP 15" freezes up when in active after install of 500GB drive

    Hi,
    MBP freezes up when in active after install of 500GB drive, the details are:
    MBP,
    Hardware Overview:
    Model Name: MacBook Pro
    Model Identifier: MacBookPro3,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP31.0070.B07
    And the hard drive is:
    Intel ICH8-M AHCI:
    Vendor: Intel
    Product: ICH8-M AHCI
    Speed: 1.5 Gigabit
    Description: AHCI Version 1.10 Supported
    ST9500325AS:
    Capacity: 465,76 GB
    Model: ST9500325AS
    Revision: 0001SDM1
    Serial Number: 5V****
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 465,44 GB
    Available: 270,65 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    And it all freezes up only when i do no use it for about 10 minutes, dunno whats going on, please advise.
    Message was edited by: Moderator

    Is the Mac set to sleep the drive after 10 minutes or so?
    What are the other symptoms with regards to your freeze? Does the screen go dark? Is the clock still running?
    Luck-
    -DP

  • Windows 8.1 doesn't hibernate or sleep after installing amd catalyst driver

    hi i am using windows 8.1 64 bit but after installing a amd catalyst center windows behaviour changed it doesn't go for hibernate and sleep and after unstall it windows comes into normal position please refered me proper solution to install amd driver wihout any issue and also suggest me which version will be compatible with my device i have tried amd 14.9 and also 14.11 but issues didn't solve i am curretnly using intel Version10.18.10.3325 windows update show me amd  wddi 1.3 driver but it always failed not installing..
    Hp pavilion-15 n037tx Notebook
    core i5 4200U
    4gb ram
    This question was solved.
    View Solution.

    Hi @Ahmed-Aslam 
    I understand that you are have problems with hibernate and sleep on your notebook.
    I would review the attached document. I realize from your post that you have tried some of the things listed, but just check it and see if anything there was missed, perhaps the section on malware issues.
    Troubleshooting sleep and hibernate issues in Windows 8
    You can also try using system restore to roll back to before the software update to see if that resolves the issue.
    Using Microsoft System Restore (Windows 8)
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Some applets fail to run after installing jre 1.5/5.0

    Hi,
    I have a big problem. After installing java runtime environment 5.0 / 1.5, some java applets from sites no longer work. I can view certain java applets, but strangely, some applets do not work. For example, when I try to log into the Hushmail account <www.hushmail.com>, the applet fails to load properly. I enabled tracing and logging and this is the output from the console:
    basic: Registered modality listener
    security: Accessing keys and certificate in Mozilla user profile: <Note: PATH removed for security reasons>
    security: JSS package is not found
    security: JSS is not configured
    java.lang.ExceptionInInitializerError
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at java.net.URL.getURLStreamHandler(Unknown Source)
         at java.net.URL.<init>(Unknown Source)
         at java.net.URL.<init>(Unknown Source)
         at java.net.URL.<init>(Unknown Source)
         at sun.plugin.AppletViewer.setDocumentBase(Unknown Source)
         at sun.plugin.viewer.WNetscapePluginObject.setDocumentURL(Unknown Source)
    Caused by: java.lang.NullPointerException
         at java.security.SecureRandom.nextBytes(Unknown Source)
         at java.security.SecureRandom.next(Unknown Source)
         at java.util.Random.nextInt(Unknown Source)
         at com.sun.deploy.net.protocol.https.Handler$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sun.deploy.net.protocol.https.Handler.<clinit>(Unknown Source)
         ... 8 more
    basic: Registered modality listener
    java.lang.NoClassDefFoundError
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at java.net.URL.getURLStreamHandler(Unknown Source)
         at java.net.URL.<init>(Unknown Source)
         at java.net.URL.<init>(Unknown Source)
         at java.net.URL.<init>(Unknown Source)
         at sun.plugin.AppletViewer.setDocumentBase(Unknown Source)
         at sun.plugin.viewer.WNetscapePluginObject.setDocumentURL(Unknown Source)
    Strangely, there is a message "JSS package is not found" from the console output above. What is this error and how do I rectify the problem so that I can view all applets without any problems?
    This is my system configuration:
    Windows 2000 Professional Service Pack 4
    Java Runtime Environment 1.5
    Mozilla 1.7.3

    Probably due to Mozilla configuration, see this search:
    http://www.google.com/search?num=100&hl=en&lr=lang_en&c2coff=1&q=jss+package+mozilla

  • GNOME3 is not working well after install the nvidia driver

    I changed my graphic device from intel (integrated in i5 sandy bridge) to nvidia (GTX550 Ti).
    When I reboot my PC, an error about GNOME failed something was showned.
    I ignored it and installed nvidia package using pacman.
    After that, I installed new nvidia driver but GNOME is not working properly.
    Terminals which I can see when type ctrl + alt + function key are not working either.
    This is part of my desktop screenshot.
    http://s18.postimage.org/gew6dx5gp/screenshot.png
    How can I restore GNOME?
    Moderator edit: The included image is too big. It has therefore been reduced to its URL. Please also have a look at these screenshot posting rules.
    Last edited by bernarcher (2012-04-05 09:38:39)

    I have no big issues with gnome3 and nvidia, in case you haven't, make sure your xorg.conf is correct or you can let nvidia make it for you, just backup/delete your current one (if any) https://wiki.archlinux.org/index.php/NV … figuration

  • Windows setup error after installing new hard drive

    My hard drive failed. After installing the new hard drive and running the recovery disks, I get an error that says windows setup could not configure windows to run on this hardware. The new HD is basically the same as the one originally in my HP Touchsmart
    600-1155 PC. 

    Hi Hpygram,
    Please share more details about this issue.
    1. What option did you choose when you use the recovery disks?
    2. Did you perform the clean installation?
    If you meet this error message when you  perform the clean installation, please refer to the following KB for more details.
        “Windows Setup could not configure Windows on this computer’s hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
    http://support.microsoft.com/kb/2466753
    • Check if the hard drive you are installing to is an "Advanced Format" disk.
    • Check your setuperr.log and setupact.log to see if the error are related to your drivers.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Hp mini 110 boot disk error after installing new hard drive and system recovery

    Need help,  HP mini 110 Windows 7 32 bit.  using my recovery disks I created i was able to recover to the old 160 gb hard drive.  After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

    If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
    Can't get enough of this Envy...

  • How to move files after installing new hard drive

    I am considering the installation of a new 80 or 100 GB hard drive. I purchased the new iLife 06 program but I do not have enough space to install on my present 60 GB unit. I only have 3 GB available. I've read all the posts involving the possible brands, downloaded the instructions how to swap out the units. My question is how to backup and install my files and applications so I may reinstall onto the new drive. Can I just copy my hard drive volume onto my external Lacie storage unit and then drag the volume back to the new hard drive after booting off my OS disk? Any advice on how to move my apps and files? Do I need to purchase cloning software?

    The easiest way is buy an external firewire enclosure and put your new drive in it. Then format your new drive. then use Carbon Copy Cloner to copy your internal drive onto your new drive. Then install your new drive and put your old one in the enclosure. You are now in business with an external backup on your old drive.

  • How do you upgrade OS X server 4.0 to another drive after installing on primary drive

    I've upgraded OS X Server to version 4.0 after installing the Yosemite OS X. As usual, the server does not work properly after the upgrade. I've installed Yosemite on another boot drive to rebuild the system. I'm trying to upgrade the new install of Yosemite to the Server 4.0 version but when clicking the upgrade button, it just sits there with the wheel spinning. Has anyone seen this and how can I get the copy downloaded again to install version 4.0 of OS X Server?

    I appreciate both of your prompt replies. According to the following support page (http://docs.info.apple.com/article.html?artnum=107037), I only needed OS X 10.1 or later (more specifically, it says that 10.0.X or earlier cannot be upgraded without erasing). This page was directly referenced by this page (http://docs.info.apple.com/article.html?artnum=301270) which is on the very post that Ferd referenced ("10.4 Tiger Upgrade: Decision tree+Checklist" at http://discussions.apple.com/thread.jspa?threadID=121773). I can find nothing on official Apple websites that says anything about needing OS X 10.2 to upgrade to 10.4. The bottom line is that most of my harddrive is consumed with my music (approx 15 MB) and there is no convenient way for me to back it up or move it without buying an external hard drive. It just seems absurd to me that in order to use my new $300 iPod that I need to both invest $120 in new software and then another $100-200+ in an external hard drive so that said new software can be installed over my existing data. It's really bad enough that Apple gives you no charger and no case for the iPod, charges you for new software versions, and then makes their new software so incompatible that you have to erase your hard drive just to install it. Exactly why do people love their Macs over their PCs? If I have to buy an external hard drive, why shouldn't I simply take all my data off of my iBook and be done with Macs forever?

Maybe you are looking for