Hide field in material master

Hi Friends,
I want to hide a field in material master can some please give the step by step method of how to do the same.
Regards,
Wasim.

Hi,
Follow the steps to hide a field in material master:
1.Just click the TAB ,(Which you want to HIDE )and get the field name (Press F1 & then in next screen click technical information)
2. Use T.Code: OMSR and enter that field name and get FIELD SELECTION GROUP
3. Use T.Code: OMS2 and click your material type(you used to create that material) and in next screen check Field reference ( you have assigned for the material type){{ ( example-->For ROH material type the "Field reference" is ROH)
4. Now use T.code:OMS9, Double Click your "Field Reference" and select  FIELD SELECTION GROUP  & select round box of  HIDE  and save.
Regards,
Biju K

Similar Messages

  • Add z field in material master at plant level

    I wanna to assign a new field in material master at plant level..
    What settings should be done to do this?
    Positive response will be highly appreciated.
    Regards

    hi,
    You can define the field directly via assigning the field to field selection group...This could also be done at industry sector, plant level as well....
    Check the path :
    SPRO >> Logistics general >> MM >> Field selection >> Assign fields to field selection group...
    SPRO >> Logistics general >> MM >> Field selection >> Assign field at plant
    SPRO >> Logistics general >> MM >> Field selection >> Assign fields at industry sector level...
    For this assign the field to the respective table and then provide it at OMSR...
    Assign field selection group to it...
    Then in OMS9 give the priority for hide/display/req/optional to field...
    If you want this to be added in the new screen, then you have to make the settings under "configure the material master"...
    Hope it helps..
    Regards
    Priyanka.P

  • Purpose of Cash Discount field in Material Master

    what is the purpose of Cash Discount field in Material Master. what does it control. do it link to SKTO anywhere?
    please explain

    Hi,
    Cash discount is applicable for this material or not..
    This is for Sales only..
    Pricing Procedure (RVAA01) and if you activate SKTV and SKTO Condition types
    Cash Discount can calculate before tax or after tax
    Condition Type- SKTV(Statistical Condition Type)---If you check requirement is "14" which says Discount before Tax( This will calculate from the Filed Material master "Cash Discount Indicator" ie "SKTOF"
    Condition Type-SKTO-(Statistical Condition Type)--
    >Requirement "9" Discount After tax - here also it will consider filed "SKTOF" ie "Cash discount indicator in material master.
    SAM

  • Maintenance of Z field in material master

    Hi All,
    Could any body pls let me know where can I maintain the selection option for Customized field in material Master.( Means F4 options for any z filed)
    Any help will be highly appreciated.
    Regards,
    Meenakshi

    take help of abap guy.
    regards

  • New standard field in Material master

    Hi
    I have to introduce "RETDELC" field in Material Master.
    The said field is already available in MARA table.
    The field is available only in ECC 6.0 version.
    I have introduced the field in Field selection group and make it optional at client level, material type level and Transaction code level (MM01,MM02, MM03).
    But stil, i could not get the same field in Material Master- Basic Material data-2 view.
    Any help please!
    Regards
    Prasad

    this fields domain is DFPS_RETDELC .
    DFPS stands for Defense Forces & Public Security.
    In order to use this industry solution, you need to activate additional business functions
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/d8/686660a46d486e95f0a3588111376d/frameset.htm

  • Control Code field in Material master- Foreign Trade imports tab

    Hello Experts,
    I am trying to understand the purpose of Control Code(MARC-STEUC) field in Material master- Foreign Trade imports tab. I am also interested in knowing where does this field appear in our PO.
    Please help..
    Manish

    Normally control code specifies the norm to follow by the supply plant for a sale of exposrts. each contry will have a set of rules to get follow as a stuatory . this code specifies the rules or certificates.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7443a5546011d1a7020000e829fd11/frameset.htm
    may be comes in a sale order.
    Regards

  • 'Storage bin field in material master

    Can we increase character length of 'Storage Bin' field in material master so that bin details can be accomodated ?

    No you cant!
    Takehelp of some other field.(text field)
    Edited by: uttkarsh agrawal on Jan 30, 2009 3:11 PM

  • Transportation group field in Material master..Sales/Plant data tab.

    Hello Gurus,
    The transportation group field in material master is Material specific or a plant specific?? caz whenever i am changing this transportation group field in one plant it is also updating with the same value in all the plant for the common material even though the Company code and Country are different forall the plants.
    Hope to hear from you soon as its a very high priority production issue..
    regards
    Rikinl

    The transportation group field in material master is Material specific or a plant specific??
    Its material specific.  Even if you have multiple sales areas or plants and if you change the transportation group, the change will be applicable for those areas also.
    thanks
    G. Lakshmipathi

  • Specific Field in Material Master

    Hi All,
    just some user can't see specific Field in Material Master with using MM03, but others people can. Where should  I change settings? Is it something to do with authorization?
    thank&regards

    >
    Jiami wrote:
    > Hi Biju, Pete
    >
    >
    > thanks for Support.
    >
    >
    > Material is created as ( Industry Sector: mechanical engineering
    >                                     Material Type: Trading goods)
    > Field name: Basic material (in Tab Basis Data 2).

    >
    > user can see Field now,
    > but just When we using MM03 in normal level, the Field will be displayed.
    > But after we given a plant, in Plan lever then we can not see this Field anymore in Tab basis Data 2.
    >
    >
    > thanks
    >
    > Jia
    execute OMSR,
    position on field MARA-WRKST
    click the button field selection  right of selection group
    you will now see which fields are assigned to the group
    and below you see in in which field reference the group is set to hidden.
    field reference is a multi usage, it can be for material type, for transaction, for industry .
    so you have to check at least the settings for your material, for the transaction where you get this effect and for the industry you material is created with.
    further there is a customizing transaction OMSA, which is plant specific field selection, and I guess that causes your effect.
    open it and see which selection group is assigned to it.
    then go back to OMSR and see what status is assigned to this field reference.

  • Initialize some fields in material master with default values

    Hi,
    I would like to initialize some fields in material master MM01 with default values.
    for exemple in the view MRP1 there is a field MRP type I would like to initialize PD in the field as default value.
    but when I go to the technical information there is no parameter id that I can use in SU3.
    Do you know how I can the initialize the field those don't have parameter ID?
    thank
    Dede

    Dear Glenn,
    This is possible in SAP for this use T code MMD1 and create MRP profile and assign this MRP profile while creating material using MM01 in the organisation level put this created MRP profile. The values you maintained in this profile get copied to the material by default.
    To maintain MRP profile go to MMD1->give your profile name...........> click on  selection screen push button--->give here profile description--->select what MRP  field which u want to make fixed one/default. if make fixed later you can not change--
    >click on data screen 1 push button and maintain your value and save
    sree

  • Maximum number of fields in material master

    Hi,
    Could you please help to understand how many fields can be added in material master Tab.
    Example - If we create new material master tab as additional data and would like to add some fileds in that tab, is there a limit we can't add more than certain number of fields.
    Please advise how many cloumns can be added as well in one tab.
    Example
    Material master additional data Tab (New)
    feild 1 description field 4 description field 7 ......
    field 2 description field 5 description field 8 ......
    field3 description field6 description field 9 ........
    I think the fields should be assigned to feild selection group which is reserved as for Z fields
    Please confirm if my understanding correct for Z fileds
    211-240 Reserved for customers
    As I think only 20 field can be assigned to field selection group but My question is can we assign more than one filed selection group to one material master tab. I mean to increase the number of field to be added in new additional data tab can we add 111-120 Reserved for customers and 211-240 Reserved for customers to one material master additional data tab.
    Thanks

    Hi,
    For add fields to material master, check Note 44410 - Integrating cust.-specific fields in matl master (and related notes).
    Other note useful to understand the range of customer names in SAP: SAP Note 16466 - Customer name range for SAP objects.
    I hope this helps you. If you need something else, let me know.
    Regards,
    Eduardo

  • Maintain Profit Center as mandotary field in Material Master

    Dear Experts,
    We would like to make Profit Center under Sales: General/Plant view as mandotary field during Material Master creation. Kindly assist me the path that where we can maintain this. Thank you.
    rgds,
    nantha

    Hi,
    Go to OMS9, Under Field Selection (Field Selection Group 1) screen tab, double click the material type for which you want Profit center as mandatory field.
    Scroll down to Selection Group "48", Select the radio button "Required Entry".
    Go to MM01, check under Sales: General/Plant, you will be able to see Profit Center as Mandatory field.
    Hope this will help you out.
    Regards,
    Vijay

  • Custom fields on Material Master - ECC6.0

    Hello
    We have added custom fields on material master basic data screen following these steps :
    1) Copied Func. grp MGD1 to Z Fgrp via Spro -> Logistics General ..
    2) Created a subscreen in Z fungrp by copying screen from original program.
    3) Deleted the unwanted fields and added new fields to the layout and Fields in PAI.
    4) Attached the subscreen in screen sequuence via SPRO
    We are now able to see the new fields on the baisc data screen and also able to input data in these fields , but on SAVE the data is not getting saved to database table MARA.
    We have also referred to OSS note 44410 but with no help.
    Are we missing something , is there anything additional that needs to be done in ECC6.0 ?
    Thanks

    Hi Kalidas,
    In your customized subscreen, did you update the PAI to include your custom field?
    process before output.
    *                      Verarbeitung vor der Ausgabe
      module init_sub.
      module get_daten_sub.
      module feldauswahl.
      module sonderfaus.
      module sonfausw_in_fgruppen.
      module feldhistorie.                         "Aenderungsdienst
      module bildstatus.
      module zusref_vorschlagen_b.
      module refdaten_vorschlagen.
      module zusref_vorschlagen_a.
      module set_daten_sub.
    process after input.
      module get_daten_sub.
    * Put your custom fields here to copy to structure for saving
      field: mara-zzcustom.
      module set_daten_sub.

  • How to activate field in Material Master

    Hi,
    Can anybody tell me how to activate BRAND_ID field in the material master?
    Thanks in advance.
    Samir Bhatt

    To activate this field i.e you want this feild to appear in your material master screen.You have to follow :
    Logistics - General>Material Master>Field Selection>A
    ssign Fields to Field Selection Groups
    Here you will find that your Feild MARA-BRAND_ID has selection Group 200
    Maintain Field Selection for Data Screens  in this Step check fo r the Selection group :200   You will get the feild  Brand there  in the selection group 200.
    you can make setting of the feild accordingly as hide /display /........etc

  • Add fields to material Master (MM01)

    Hi Experts, after checking OMS2, OMS3, OMS9, OMSA...I still have no idea about how to show some fields in my material master data. They belong to group 103 which is assignet to material type FERT and Basic Data 1. They are setup as "Optional" but they are not shown when I try to create a new material.
    I expected to find it easy to solve, as when you modify others screen layouts (p.e. Materials Management> Purchasing>Purchasing Info Record-->Define Screen Layout) but it seems not. Any idea?
    Thank you

    Hello Cristian,
    You cannot define the field selection for an individual field, however,        
    the fields are grouped together in field selection groups.(Customizing         
    'Assign Fields to Field Selection Groups') The input/output attributes         
    are determined per field selection group.For the specification of the          
    properties of a field selection group, there are several criteria. They        
    are called field selection references.Not only one criterion (= field          
    selection reference) is relevant for the definition of the field               
    selection attributes but SIX criteria are.                                     
    Some of the field selection references are hard-coded (for example,            
    transaction) others can be defined (for example, plant, material               
    type...).In the following, the six field selection references are listed       
    and also the transactions in which they can be defined.                                                                               
    1.  Transaction (MM01, MM02 ....)                                                                               
    2.  Industry sector (you can assign the field selection reference to the       
        industry sector by using Transaction OMS3)                                                                               
    3.  Material type (You can assign in field FELDREFERENZ by using               
        Transaction OMS2.The name of the material type is not automatically        
        the field selection reference but it depends on what is on field           
        FELDREFERENZ in Transaction OMS2.If the field is empty, there is no        
        specific settings for this material type.)                                                                               
    4.  Plant (you can assign the reference to the plant in Transaction            
        OMSA)                                                                               
    5.  Procurement-releated field selection references. There are the two         
        field references E (internal procurement) and F (external                  
        procurement). It depends on the settings in Customizing for the            
        corresponding material type under 'Internal/external purchase              
        orders' whether one or which one of the field references is used. If       
        internal purchase orders are allowed (setting 1 or 2) and external         
        orders are forbidden (setting 0), the field selection uses E. If           
        external purchase orders are allowed (setting 1 or 2) and internal         
        orders are forbidden (setting 0), the field selection uses F. When         
        both internal and external purchase orders are allowed, the field          
        selection uses neither E nor F.                                                                               
    6.  Customer-specific field reference KB (customer-specific                    
        requirements)                                                                               
    Since a field can have only one attribute at the end (display = '*',           
    change = '.', hide = '-', required entry = '+') a property must be             
    determined from these six criteria.You do this by prioritizing the             
    above-mentioned properties:                                                    
    The hide function has a greater effect than the display function.The           
    display function has a greater effect than the required entry function         
    and the change/ready for input function has the least effect.                  
    If for one of the six mentioned field selection references 'Hide' is       
    set for the relevant field selection group, all fields which were       
    assigned to this field selection group are hidden, no matter how the     
    attributes were set in the other five field selection                    
    references.Therefore, you must always check all six field selection      
    references.It is not sufficient just to look at one field selection      
    reference.                                                               
    If you checked this setting and, however, the field does not have the    
    display attribute required, then it is possible that the attributes of   
    the field are hard-coded.
    Regards,
    Mauro

Maybe you are looking for

  • HP 8600 constantly goes offline on Windows 8

    Does anyone have any tips on why my HP 8600 keeps showing that it is offline on Windows 8? I have two machines running Windows 8 and both show the printer offline. I also have a mac, ipad and another computer running Windows 7 - and each of these can

  • XSLT Mapping a Stringtable to a Structure

    Hello together, i am pretty new to XSLT Transformations and after reading serveral Blogs and even the great Book XML for Abap Developers, i still have an issue with understanding XSLT. For example, i have a deep structure with 2 stringtables. Now i w

  • Problems with the SMIL-plugin

    I've played around a little bit with the SMIL-plugin and ran in to some problems that might be possible bugs. Hope somebody could shed some light on this. 1. Adding the attribute clipBegin and/or clipEnd seems to be ignored in the creation of all ele

  • IMac Hangs at loading screen or loads into os but crashes alot

    I have had my iMac for 7 months now. This is the 1st problem I have had. Sometimes it will hang on the loading screen with the apple logo and the spinning cursor. Sometime's it would load into the OS but once I start doing anything on it like using f

  • Order Details and PayPal

    We have PayPal Payments Pro set up and working and the question is: can we pass the order details along to PayPal? The end goal is to have those details (such as which product was ordered) appear on the email notification the client receives from Pay