Hiding grand total value in pivot table view

Hi,
I have a pivot table in which i have 5 measures, out of these 5 measures i want to show the grand total for only the first one. How can this be done?
Thx

hi Phantasm, do as it is mentioned as kart.
IT WORKS FINE, put agrregation rule as none and take row total as after.........
take aggregation rule as NONE for last 4 columns ok......
TRY NEATLY ONCE..........IT WORKS
Thanks & Regards
J Rushi

Similar Messages

How to hide % measure column Grand Total value in Pivot View in obiee 11g?

Hi ,
I am facing a issue in obiee 11g .I am using a Pivot table to display the grand total of 3 metric columns eg: A , B, C out of which B is percentage so I need to remove the grand total value of the percentage column. We have to stick to Pivot View only. Anyone can sugest me on this?
Thanks ,
Shruti

Move B to rows section or cast to char in Criteria tab by keeping the B in Measures section only.
cast(B as char)

Average of the Grand Total in the Pivot Table

all,
I have calculated a Grand Total of sum 3 days trade in the pivot table using the Totals after in the Pivot table. I wanted to obtain the average of this Grand total. How can i achecive this in OBIEE 10g.? Please help urgent

I did not understand your scenario exactly. Did you try using the 'newly calculated column' option from 'More options' of the particular column for which you want the average?.
for example
segment brand 1 value
brand 2 value
brand 3 value
brand 4 value
Avg brand per segment <value>
notice that the 'Avg brand per segment' is a 'newly calculated item' where the average brand has been calculated. hope this helps.

Rank on column-level Grand total column in pivot table - Need help

Hi ,
I have developed the report, which is having a pivot view. In pivot view i have a column level grand total. I need to apply the rank for the grand total column..
will that be possible.. if possible let me know..
Thanks
Kishore

MAY BE IT IS NOT POSSIBLE IN PIVOT VIEW< AS WE DONT HAVE FORMULA EDIT OPTION FOR COLUMNS IN PIVOT VIEW.......
Thanks & Regards
Rushi

How to Display a Detailed Grand Total Column in Pivot Table

I have a pivot table that looks something like this:
I would like to display the 'Grand Total' column at the end so that it is separated by year, like this:
Is there a pivot table setting that would allow it to display this way? I've searched high and low but haven't found anything. I appreciate any help. Thanks!

You can add a calculated item to the pivot table to display grand totals by year:
1. First, turn off grand totals for rows and columns (PIVOTTABLE TOOLS > DESIGN tab > Layout group > Grand Totals > Off for Rows and Columns)
2. Click on the Price List (Invoice) field in the pivot table (hidden above the
Member field?). You must click on the pivot table cell containing the field name for the entries "Member" and "Non-Member".
3. Add the calculated item (PIVOTTABLE TOOLS > ANALYZE tab > Calculations group > Fields, Items & Sets > Calculated item...
4. In the "Name:" box, type: Grand Totals
5. In the "Formula:" box, type: = Member + 'Non-Member'
6. Click the "Add" button, and then click "OK"

Grand Total sorting in Pivot Table

Hi Everyone,
I have 4cols taken in row and one in col with measure and i now i calculated the grand total and i want to sort the values in grand total., could anyone pls help me

hi Phantasm, do as it is mentioned as kart.
IT WORKS FINE, put agrregation rule as none and take row total as after.........
take aggregation rule as NONE for last 4 columns ok......
TRY NEATLY ONCE..........IT WORKS
Thanks & Regards
J Rushi

Hiding a Measure Column in Pivot Table view in OBI 11.1.1.6.7

Measure column hide property is not working with OBI 11.1.1.6.7
I have checked the flag available in column property to hide the measure column . Any idea

Measure Columns can't be hidden like an attribute. How ever you can use custom style sheet for Value and Header Properties to not show the measure.
for the "Custom CSS Style Options (HTML Only)" under measure properties of the column set "Use Custom CSS Style" value to 'display:none'.
Let me know if this worked.
Regards,
Jay

Grand total "before" on static table

I can do grand total "before" on pivot table...but I need to do in static table. Is possible??
With pivot table I have option "after", "before" but in static table I don't have any option...
Thanks!

Set the aggregation for the metrics.. Either in RPD or in report.
In report, Open fx of column and you will aggregation drop down at bottom of pop up window. Set that to proper aggregation, and try grand totals.
- Madan

How to show Grand total values in Chart view....

Hi,
I have a crazy req. like i need to show grand totals values also on the chart view along with the normal metrics.
column Metric1 Metric2
AAA 10 20
BBB 30 15
CCC 20 15
TOTAL 60 50
so here i need the values 60 and 50 also also to be displayed in a line graph
cheers

Pretty simple to achieve :)
In your Pivot view, under Rows section where you have column dimensions like AAA,BBB etc...create a new calculated item say Grand Total with function as 'formula' and formula as sum(*). This will give you a new row with totals. Now Chart Pivoted Results and you are done.
Hope answered

Calculate a daily average in pivot table view

I am new to biee 11g and would appreciate any assistance with the following.
I have a pivot table view which includes a hierarchy column and a single measure, units. The pivot is filtered based on date that is prompted.
I need to include a column in my pivot table that displays the average unit sales for the period being displayed based on working days. ie total units for the period divided by the number of working days in the period selected. The date dimension contains a flag indicating whether a date is a working day or not.

Measure Columns can't be hidden like an attribute. How ever you can use custom style sheet for Value and Header Properties to not show the measure.
for the "Custom CSS Style Options (HTML Only)" under measure properties of the column set "Use Custom CSS Style" value to 'display:none'.
Let me know if this worked.
Regards,
Jay

Creating a pivot table view with two levels of headers

Hi,
I have a requirement in which i need to have a common heading for two or more columns.
For Example, I have two columns like total number of loans and Total loan amount. As per my requirement, i need to give a common header 'Total loan' as the main header and amount and Count as two subheaders under the main heading in the pivot table.
In table view, i would be able to make it using the display column and table header property. But, i need to get the same in pivot table as we have to use pivot table view instead of table view.
Please Help me on this issue.
Thanks in Advance
Deepak

Hello,
create one column in criteria and change it's fx to case when 1=0 then Products."Prod Name" else 'Tota Loanl' end
Now go to pivot and drag this column to Columns block of pivot. But keep this column up of Measure Labels and Now, go to column Format values.
Mention cell horizontal alignment to Center
see the following screenshot, Header is the column i created with the above functionality.
!http://i852.photobucket.com/albums/ab83/kishorg86/Header.jpg!

End total in a pivot table

Hi,
Is it possible (in Oracle BI 10g !) to split up the total line of a pivot table ?
In the attached example there is only 1 line for the end total and that's the total for 2013 and 2014 together.
I would like to have 2 lines in the total :
- 1 line with the total of 2013
- 1 line with the total of 2014
I know there are some work-around solutions such as putting the year in the column part but that can't be used because :
- we will have more columns as result
- the end user really would like to see 2014 below 2013 and NOT next to each other.
Thanks for any help or suggestion
Patrick De Weyer

Hi,
A pivot table view of this data would look something like this by default:
Now switch back to the criteria tab and edit the ‘column properties’ associated with your fact measure. Choose the ‘Data Format’ tab, tick to override the default format and choose ‘Custom’.
It seems that the syntax for this custom format is positive-value-mask (semi colon) negative-value-mask (semi colon) null-mask. So this means we have a few options.
E.g. if you want zeros (0) instead of null then enter:
*#,##0;-#,##0;0*　
If you want a dash/strike (-) then you could enter:
#,##0;-#,##0;-
Or if you want to add a custom message then something like this would work:
#,##0;-#,##0;no data
http://obieeelegant.blogspot.com/2011/06/how-to-replace-null-values-in-obiee.html
if it's not working above method use BIN in report
thanks
Deva

No data for Parent-child hierarchy column in Pivot table view

Hi all,
I used OBIEE 11.1.1.6.2 Version.
I drag one Parent-child hierarchy column and one measure and show result with a pivot table view.
But when I click "+" icon to show detail level data,
It messaged that: "*the layout of this view combined with the data,selections,drills,or prompt values chosen resulted in no data*."
But it can show every-level data when I used table view.
It was so strange..
Did anybody meet this before?
Thanks in advance.
regards,
Anne

Hi,
Yes, I have the same problem with pivot table for hierarchy dimension.
If you use a normal table (not pivot) it seem to work. Unfortunatley with restrictions as normal table view have.
Same problem still exist in 11.1.1.6.5
I have logged a SR to Oracle about this.

How to replace null as 0 in obiee11g pivot table view?

Hi,
I am using obiee11g pivot table view,
I have tried so many views but it's not work. My oracle support team also tired but could not solve it
1.) used BIN method is that measure columns
2.) ifnull(column name,0)
3.) case condition:
Case when columns is NULL then 0 else column end
4) data formate override custom formate option
It seems that the syntax for this custom format is positive-value-mask (semi colon) negative-value-mask (semi colon) null-mask. So this means we have a few options.
E.g. if you want zeros (0) instead of null then enter:
#,##0;-#,##0;0
http://obieeelegant.blogspot.com/2011/06/how-to-replace-null-values-in-obiee.html
Note:
I don't want to show strike-rate and custom message in that blank cell. I want to show blank cell(null values) as 0 in the obiee11g pivot table view.
Obiee10g version is working fine only issues in obiee11g
Thanks in advance...
Thanks
Deva

I tried this on 11.1.1.6.2 but I can't see good results.
I choose subject area A-Sample Sales and I choose:
T02 per Name Month on rows
P1 Product on columns
Measure : IFNULL("Simple Calculations"."17 Net Costs", 0)
Prompted Year 2008
On product Install and 2008/01 there isn't value...and I put Ifnull in my formula...
My problem is that I want to do a conditional format when Product = Install. So I have all column with background colour except Null values...so is not pretty...
If I add custom numeric format I can see 0 but not with background colour...
I add a picture:
http://imageshack.us/photo/my-images/600/tablegk.jpg/
Any help about it??
Is a bug on obiee??
Edited by: Alex1 on 04-sep-2012 4:28

Grand total values are not matching with Detail report

Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
Please provide your thoughts and insight on this issue..
Thanks

is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name?

Hiding grand total value in pivot table view

Similar Messages

Maybe you are looking for