Hierarchy: How to suppress duplicated/repeated rows in a BEx query
Hi Gurus.
I have a BEx query which displays data based on a Cost Element hierarchy. When the hierarchy is expanded to leaf level (or any level), all key figures and characteristics are displayed for the leaf level but are also repeated throughout all the levels above.
Is it possible to suppress the repeated rows in higher levels of the hierarchy and display a summary result only?
The issue we have is that if the user wishes to export or save a workbook, they will have to filter and manipulate the report a great deal which is impractical.
I'm hoping it's a simple setting that I've missed. I look forward to receiving the magic answer!! :o)
Thanks,
Angela
Hi All,
I've been playing around a bit more and found a setting which I hope my users will find acceptable:
From the query - Query properties -> Data Formatting tab - Multidimensional View -> select Display Rows hierarchically and expand to (chosen characteristic)
Can anyone tell me if I can set this as a default setting in the query designer, or will I need to create a view to save the setting?
Thanks all,
Angela
Similar Messages
-
How to suppress a complete row when some of the columns are blank
Hello,
is it possible to suppress an entire row in the BEx Report where some of the columns contain no values. The report is in BW 3.5 version and is opened in the web browser. It contains only characteristics in the ROWS area of BEx Designer.
Pls help. Thanks.
SDHi,
You can wirte a condition on any keyfigure stating that KF1 > 0.So once that condiiton is active and if any column is blank then it will not display it.
Pelase check out this link as well.
http://help.sap.com/saphelp_nw04/helpdata/en/a4/dd3841d132d92be10000000a1550b0/content.htm
Hope it helps.
Regards,
AL -
How to get number of rows return in SELECT query
i'm very new in java, i have a question:
- How to get number of rows return in SELECT query?
(i use SQL Server 2000 Driver for JDBC and everything are done, i only want to know problems above)
Thanks.make the result set scroll insensitve, do rs.last(), get the row num, and call rs.beforeFirst(), then you can process the result set like you currently do.
String sql = "select * from testing";
PreparedStatement ps =
con.prepareStatement(sql,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
ResultSet rs = ps.executeQuery();
rs.last();
System.out.println("Row count = " + rs.getRow());
rs.beforeFirst();~Tim
NOTE: Ugly, but does the trick. -
How to suppress "no valid rows of data" warning for composite Planning Form
I had an issue with using a 2-grid composite webform. I want to show Substitution Variables along with my primary grid. My secondary grid was created using Substitution Variables for rows, columns, and page dimensions. I am hiding all of the segments but not suppressing missing for rows or columns.
The problem is that I get the message "There are no valid rows of data for this data form" on the composite form due to my secondary grid (the Substitution Variable grid). Any tricks on how to suppress that? I even tried to add some data to an intersection, but, even with data, hiding the segments seems to bring on the warning message.
Thanks.That can be caused if suppress on columns is on. We usually ignore the column part
Even after all suppression is turned off and still getting the error, then yes it is could be because there is not data for that intersection.
Regards
Celvin -
How to restrict number of rows returned in a query
Hi frnds,
I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..776317 wrote:
Hi frnds,
I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..
TELL ME HOW MANY ROWS YOU HAVE IN TABLE?
Because you have only *6 rows* in you column, if you less than 10 rows then it displays only containied/exist rows. nothing much
select ename,empno from emp where rownum < 10;Thanks -
How to suppress the back-ground execution of a query in design mode
hi guys,
there is a bahaviour of the system, that I'd like to change. So, when we
1. start EXCEL
2. go to the designer mode to create a report
3. first drop an InfoProvider (e query) into a cell,
4. second - pull e.g a filter element into another cell, still being in the design mode.
Just in this moment, the query itself has been already started in the back groud, aiming to fill the cache, I guess.
Does anyone know how to suppress the back-ground execution? I'd like to control, when to start the reports execution.
Thanks in advance.
NevenHello,
There is no way to do that if you are creating thru BEx Analyzer.
Instead use the BEx Analyzer, try to create using directly BEx Query Designer.
In that way, the query will not be executed, until you want to...
Thank you
Edward John -
Drill down ( Collapsible Row ) Report in BEx query designer ?
Dear Friends!
I am supoosed to create a report drill down report for Purchasing History to be precise, I know that we can have drill down feature using heirarchy but is it possible for Us to have PO & PO item heirarachy ? or any other way to do drill down reporting in SAP BEx Query designer ?
like my current report is : -
| Vendor | Purchasing Organisation | Purchasing Group | Plant | PO Number | Item | Material / Service | Description | .... ( keyfigures) |
Now I am supposed to create a report in which
normal view
| Vendor | Purchasing Organisation | Purchasing Group | Plant | |> PO Number| .... ( keyfigures) | Payment |
drill down or collapsible view ( please consider the heading as data I am not talking about dynamically change of headings ).
| Vendor | Purchasing Organisation | Purchasing Group | Plant | V PO Number | Item | Material / Service | Description | .... ( keyfigures) |
is there anyway to design the report in above mention manner ? you any input will be appreciated greatly.
Thank you so much!
Regards
NaimHi Naim,
usually we don't do the transactional data as hierarchy. not sure the reason behind your requirement.
we can do one of the below :-
1. To have the default view as
| Vendor | Purchasing Organisation | Purchasing Group | Plant | | PO Number| .( keyfigures) | Payment |
and then user can drill down on rest of the characteristics for detailed view later on.
2. or if they don't want to drill down on characteristics;-
we can build 2 reports , one for header level information and then jump to second query for detailed information(item level) using RRI.
first query:
| Vendor | Purchasing Organisation | Purchasing Group | Plant | | PO Number| .( keyfigures) | Payment |
second query:
| Vendor | Purchasing Organisation | Purchasing Group | Plant | PO Number | Item | Material / Service | Description | .... ( keyfigures) |
Let us know if this works out?
Regards,
Sakthi. -
How to bulid a Crystal report based on Bex query as source
Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,Hi
The Crystal Reports are integrated with BW such that the query built in BW can be used to bulit Crystal Reports on them.
After launching the Crystal Reports, you will have and option : "Open reprt from BW" whcih will help you in opening the BW Queries and create Crystal Reports.
Also in the Menu there is an optin SAP-->Create New Report from a Query
Regards, Hyma
Edited by: Hymavathi Yanamadala on Aug 13, 2009 5:52 AM -
How to define variable for value range in Bex Query?
Hi
How to define variable for Keyfig. value range on runtime like characteristic in Bex Query?
Example: On runtime user select one of the following condition:
1)User want to those records where amount is greater than $1000
2)User want to those records where amount is greater than $1000 and less than $5000
3)User want to those records where amount is greater than and equal to $1000Hi ,
Need to Use exceptions & conditions for this scenario's & need to create variable for exceptions based on condtions.
Below document provides steps how to make selections at run time for a kfg.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60b33a28-dca2-2d10-f3b2-d2096b460b1e?QuickLink=index&overridelayout=true&48842368468641
Regards,
Seshu.P -
How to buld Crystal report using data from Bex query
Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,
ChandraHi Chandra,
Here is the docuemnt which explains you in detail about the steps to create Cyrstal Report using BEX Query.
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948&overridelayout=true
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Regards
SIndhu -
How to build and publish a webservice using Bex query?
Hi Experts,
Can anyone tell me how can i step by step to build and publish a webservice using Bex query,
so another application can call this webservice.
thanks.There i already a web service called query_view_data for the same available as delivered by SAP...
-
How can i work with variables of the BEx-Query in WAD ???
Hi Experts !
In my Web Template i want to work with the value of a BEx-Variable like this :
</td>
<td class="SAPBEXTbsTab" id="head_TAB4"><A href="javascript:if (V_TEST != '1') {goto_tab('TAB4')}">Summenblatt 3</A>
</td>
V_TEST is a variable in my BEx-Query. Does someone know how i can get the value from this variable ???
Thx Andreasto get the query variable value into javascript variable you can do like below
<script>
var period_val = '<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TEXTELEMENTS_PERIOD"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
<param name="DATA_PROVIDER" value="DP"/>
<param name="GENERATE_CAPTION" value=""/>
<param name="ELEMENT_TYPE_1" value="VARIABLE"/>
<param name="ELEMENT_NAME_1" value="0P_FPER"/>
<param name="ONLY_VALUES" value="X"/>
ITEM: TEXTELEMENTS_PERIOD
</object>';
</script>
Raja -
How to Generate a MDX statement using a BEX query
Hello,
Is there any possiblity in BW to generate a MDX statement using a BEx query?
Thanks,
RaviBW does not generate any MDX statement for Bex query.I have tried ample number of times to acheive this but failed.
Like an Infocube the Query is also an object where in you can write MDX queries on BEx Queries.
As it is I never found BW rendering MDX queries.But with MDX queries you can get something but how far it helps I don't know.
RSCRM_BAPI is obsolete and it is recommended to use RSCRM_REPORT somewhere I have read ,but when I went to that transaction I never found that "MDX" button at all.
It was converted to "OLAP Check" which gave me some warning on the key figures and that's it.
Somehow I feel BW is not comfortable with MDX.
Regs
Gopi -
Need Sql Query that Suppress the repeating rows.
Hi Sir,
I have below data set.
DeptID Sum(SAL) Avg(Sal)
10 1300 1300
10 2450 1300
10 5000 1300
20 800 800
20 1100 800
20 2975 800
20 3000 800
30 800 800
30 1100 800
30 2975 800
40 3000 800
40 4000 900
I Need SQL query that can remove the duplicate or suppress.Just like below data set.
Output:
DeptID Sum(SAL) Avg(Sal)
10 1300 1300
2450 1300
5000 1300
20 800 800
1100 800
2975 800
3000 800
800 800
30 1100 800
2975 800
40 3000 800
4000 900
Could you please help me on this..Your requiremnt is more of a reporting request which should not be handled in SQL. For example in SQL Plus you can use the BREAK command
SQL> break on deptno
SQL> select deptno, ename from emp order by deptno;
DEPTNO ENAME
10 KING
CLARK
20 JONES
SCOTT
SMITH
ADAMS
30 TURNER
MARTIN
WARD
ALLEN
BLAKE
11 rows selected.
SQL>
But if you still wish to do it in SQL you can use ROW_NUMBER analytic function and achieve it like this
select decode(rno, 1, deptno) deptno
, ename
from (
select row_number() over(partition by deptno order by ename) rno
, deptno
, ename
from emp -
How I can delete a row using a simple query?
SZSLIFE_SPRIDEN_PIDM SZSLIFE_SGBSTDN_TERM_CODE_EFF SZSLIFE_SLRRASG_BLDG_CODE SZSLIFE_SLRRASG_ROOM_NUMBER SZSLIFE_SLRRASG_BEGIN_DATE SZSLIFE_SLRRASG_END_DATE
48547 199890
48547 199990
48547 199990 BLU 205 09/03/1999 12/23/1999
48547 200010
48547 200010 BLU 205 01/25/2000 05/25/2000
48547 200090
48547 200090 MOR 406 09/03/2000 12/23/2000
48547 200110
48547 200110 MOR 406 01/25/2001 05/25/2001
48547 200190
48547 200210
48547 200290
48547 200310
48547 200390
48547 200410
48547 200610
Here is what a simple question is probably for some of you; I can not get this to work. I need to delete all the rows that are duplicate like row #2 with the same SZSLIFE_SGBSTDN_TERM_CODE_EFF but with not
SZSLIFE_SLRRASG_BLDG_CODE and SZSLIFE_SLRRASG_ROOM_NUMBER
I need to write a code where it counts the SZSLIFE_SGBSTDN_TERM_CODE_EFF and if it have the same (2 times.
I need to delete the row without SZSLIFE_SLRRASG_BLDG_CODE and SZSLIFE_SLRRASG_ROOM_NUMBER
The SZSLIFE_SLRRASG_BLDG_CODE NEEDS to be not null, because I do an insert in this table I need to be able to insert null values.
How I can use a simple query where I can delete all the duplicate records without bldg_code and room number…
Here is the table description
SZSLIFE_SPRIDEN_PIDM NUMBER(8)
SZSLIFE_SPRIDEN_ID VARCHAR2(10)
SZSLIFE_SPRIDEN_LAST_NAME VARCHAR2(60)
SZSLIFE_SPRIDEN_FIRST_NAME VARCHAR2(60)
SZSLIFE_SPRIDEN_MI VARCHAR2(15)
SZSLIFE_SGBSTDN_TERM_CODE_EFF VARCHAR2(6)
SZSLIFE_SGBSTDN_STST_CODE VARCHAR2(2)
SZSLIFE_STVSTST_DESC VARCHAR2(30)
SZSLIFE_SGBSTDN_STYP_CODE VARCHAR2(2)
SZSLIFE_STVSTYP_DESC VARCHAR2(30)
SZSLIFE_SGBSTDN_LEVL_CODE VARCHAR2(2)
SZSLIFE_STVLEVL_DESC VARCHAR2(30)
SZSLIFE_SGBSTDN_RESD_CODE VARCHAR2(10)
SZSLIFE_STVRESD_DESC VARCHAR2(40)
SZSLIFE_SLRRASG_BLDG_CODE VARCHAR2(10)
SZSLIFE_SLRRASG_ROOM_NUMBER VARCHAR2(10)
SZSLIFE_SLRRASG_BEGIN_DATE VARCHAR2(12)
SZSLIFE_SLRRASG_END_DATE VARCHAR2(12)
SLRRASG_ASCD_CODE VARCHAR2(2)
I will appreciate any help!
SLRRASG_ROLL_IND VARCHAR2(2)Thank you very much Sandeep, this works!
1 DELETE SZSLIFE_TEMP2
2 WHERE
3 SZSLIFE_SGBSTDN_TERM_CODE_EFF
4 IN
5 (SELECT SZSLIFE_SGBSTDN_TERM_CODE_EFF
6 FROM SZSLIFE_TEMP2
7 GROUP BY
8 SZSLIFE_SGBSTDN_TERM_CODE_EFF
9 HAVING COUNT(*) > 1)
10 AND
11* SZSLIFE_SLRRASG_BLDG_CODE = ' '
12 /
4 rows deleted.
The only thing here is that the SZSLIFE_SLRRASG_BLDG_CODE can not be defined as a a NULL, so I can not use
where SZSLIFE_SLRRASG_BLDG_CODE is null
Here is how those two columns are define:
SZSLIFE_SLRRASG_BLDG_CODE VARCHAR2(10)
SZSLIFE_SLRRASG_ROOM_NUMBER VARCHAR2(10)
So,
my question is it will be safe to do SZSLIFE_SLRRASG_BLDG_CODE = ' ' ?
Again, it works, it deleted the rfows that I wanted...
Thank you very much!!!
Rogelio
Maybe you are looking for
-
Indesign CS6 Total Document Word Count... No?
I left the following comment on a Youtube tutorial explaining how to execute a word count query for an Indesign document ASSUMING your article layout uses a single box of text: What if an article uses a creative layout with multiple text-boxes? Are y
-
How do I get imported in PS(CC) the fonts Photoshop magazine sends me on her CD.
How do I get imported in PS(CC) the fonts Photoshop magazine sends me on her CD?
-
Can I set the MTU size for the Airport Extreme?
Can I change the MTU size setting of the Airport? How would this be possible? In my Linksys router I was able to change this.
-
Send values to IN query with parameter
Subject: send values to IN query with parameter Hello. Hope I'll explain my problem well enough: I have a query: -- select id from table where id in ('100') Now I used parameter for the IN part: -- select id from table where id in (:param) and I gave
-
Problem in executing update after rollback transaction
Hi all I am using type4 driver oracle9i ,Stateless session Beans CMP. Problem is: after doing rollback i am trying to execute an update query on same id which was rolled back.System is not able to do the same. Manmeet