Hierarchy Level value displayed in BEx Query

Is there a way to display the Hierarchy Level value (0, 1, 2, etc...) associated with each hierarchy level in BEx Query as a characteristic?
we are currently using the Crystal Reports function HierarchyLevel(GroupingLevel(GL Account Node id)) to display the level of the node (0, 1, 2, etc...). Is there something similar to this in BEx Query.
We would like to use this Level value to do groupings in Crystal Reports. When we try to create a Group, we can only create the groups on fields that are brought over in the BEx Query results.
Thanks --

Hi ,
Hierarchy level can be defined in Bex query as well.
In the query property there is option where you can say hierarchy active for that particular object.
Also you can define level upto which it can be active in initial display say 3 level
Also when you want to drill down further level 4,5 you can right click and select that particular level say 4 or 5 or 6.
If you want to display hierarchy flat there is no option in BW then to right code,but I heard in crystal report it will automatically display in fl;at version as well means
Level 0 level 1 ......KF1 KF2 etc.
Thanks and regards

Similar Messages

Hierarchy Node Suppression in a BeX Query

Hi,
We haev a hierarchy with 3 levels
Level 1 (Root) - Customer Hierarchy
Level 2 - Customer Groups
Level 3 - Customer Number
Is it possible to display the Customer Groups (level 2) without displaying the Root Node (level 1) in a BeX query. If we Expand to level 2 , the query displays both level 1 & level 2. We have a requirement to see level 2 only. Is that possible?
If anyone has done this, would really appreciate if you can respond.
Thanks,
Anita

Hi Anita,
I am sure that as you have created hierarchy for Customer Number, you have to have customer group as its attribute. Dont you have that?
And if you have your transcational data, you will have them posted against customer number.
you must have Customer Number in the query already and that is the reason you could enable its hierarchy.
My suggestion was to make Customer group as navigational attribute and add them into InfoProvider. You dont have relaod the data again for this.
Moreover, Once you have customer group as navigational attribute, disable the hierarchy for customer number and in your query designer under ROW put Customer Group and Customer Number as two seperate characteristics.
This will elminiate ROOT from the result and you will have customer group and Customer number in the result.
Here the only difference is, instead of showing Customer Number below Customer group, it will be dispalyed in the next column.
- Danny

Values Bifurcation in BEx Query Designer

Dear BI Gurus,
In a column we are getting both positive value and -ve value. We want to bifurcate the values and show only +ve value in one column and show -ve value in another column. Is it possible through Bex query designer?
Please through some light on this issue.
With Regards,
Balachander.S

Hi bala,
This can be achieved by creating two calculated Key figures, Just use else if condition in the formula and use if KF1=KF>0 then KF else 0, here all the positive values will be displayed similarly use if KF2=KF<0 then KF Else 0 it will display all the negative values. But here all the values will be displayed. Just hide the Key figure and display only calculated keyfigures. Else you can use exceptions to differentiate the positive and negative values.
Hope this helps.....
Rgs,
I.R.K

BICS - Passing Mandatory Filter Variable value to a BEx Query

Hi All,
I have similar problem as the below URL.
BICS - Passing variables to a BEx Query
Details:
I have a mandatory filter - Display Currency in BEx query. I'm trying to input this mandatory filter from Xcelsius, (by mapping the filter value to a cell in Xcelsius spreadsheet).
However, when I lauch the dashvoard in IE page, it still throws an error:
" One or more mandatory varaibles of the query... are not filled"
Does anyone face this issue?
Regards,
AK

Hi Sriram,
I assume you are using SAP direct connectivity.
>> Yes, it is direct connectivity to SAP-BW.
(And I'm publishing this dashboard in SAP-BW system itself.)
1. What are all the Variables you get in intial variable screen?
because if you have a Mandatory variable in your Bex query, a intial variable screen will appear with all the variables.
>> I'm testing the underlying BEx query, it has one mandatory variable for "Display Currency". Other are optional variable-filters, so other filters are not a problem.
2. when you get this error "One or more mandatory varaibles of the query... are not filled", just after the Launch or after the variable screen?
>> I use the option in Xcelsius: SAP --> Launch --> a new IE page opens, then I get this error
3. However you can bye pass this screen only when you give default values to your mandatory variables.
>> When I use personalization in BEx side, to input default value (e.g: USD), and then run this standard content dashboard, the hangs.(Do not see anything on IE page for long time. Though the data is very less-Few hundres rows)
So, I'm looking at passing the value from Xcelsius-spreadsheet, however, the dashboard is not picking up the value from the mapped-cell.
Hope this gives more clarity on the problem.
Cheers,
AK
Edited by: Anil Kumar2981 on Jun 16, 2011 12:12 AM

How to get the Net value in SD Bex query

Dear All,
We have a key figure called Net Value in SD query 0SD_C03_. But in validating data with ERP system to this bex the value is not matching.
In this Query we are maintain sales doc category -C and Item category.
Because the Net value is depends on all the above mentioned condition.Please let me know the solution to validated the data with ERP to above Bex query.
Please let me know the possible t codes in ERP to validate the above query.
Thanks
Regards,
Sai

I dont think you can capture the offset applied value in a exit as the value is dependent on the variable itself and nothing to capture the result after the offset has been applied.
why dont you capture the variable value itself and apply the logic to do an offset in the customer exit?

How to define variable for value range in Bex Query?

Hi
How to define variable for Keyfig. value range on runtime like characteristic in Bex Query?
Example: On runtime user select one of the following condition:
1)User want to those records where amount is greater than $1000
2)User want to those records where amount is greater than $1000 and less than $5000
3)User want to those records where amount is greater than and equal to $1000

Hi ,
Need to Use exceptions & conditions for this scenario's & need to create variable for exceptions based on condtions.
Below document provides steps how to make selections at run time for a kfg.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60b33a28-dca2-2d10-f3b2-d2096b460b1e?QuickLink=index&overridelayout=true&48842368468641
Regards,
Seshu.P

Hierarchy Level Values Field SAP Retail

Hello Everyone,
I´m looking for the table and the fields specifically that contains the values of the hierarchy levels. I was looking in the table KLAH but only brings me the CLASS number (Material Group) and I need the values of the levels.
Hope you can help me
Regards,

Hi Jobi,
I agree to Juergen, you'll need individual pack specs per subitem in order to process VAS on this level. Did you think of using batches and depending characteristics for the grid values? This is how EWM for Fashion works. Then you could define only VAS pack spec for multiple grid values.
Best regards,
Christian
Remark: did you consider EWM for Fashion for your implementation?

Customer Master Text data label display in BEx query

Hi,
In my query output i have the customer number and its text displayed. The data comes from customer master infoobject.
But the label is displayed only for customer number.
But I need the label for text also needs to be displayed.
Kindly let me know is there any possibilities to display the label for the text.
Regards,
Indhu

Hi Induja ,
For 0CUSTOMER , name attribute is there so it will work fine, for others like 0MATERIAL, 0COMP_CODE etc. you can follow the steps which i have posted in above reply.
Use the same steps for 0Material, creation of Z- infoobject with reference char. of 0Material.....
Create one custom 'z' InfoObject lets say ZCUSTOMER with Reference Characteristic of 0CUSTOMER and add it to the data target, map it with same field for which 0CUSTOMER is mapped and load data into target (DSO, cube) or if you are reporting on multiprovider then assign it.
Because ZCUSTOMER is created with reference of 0CUSTOMER and mapped with the same source field , ZCUSTOMER will act as copy of 0CUSTOMER.
In query designer drag 0CUSTOMER and ZCUSTOMER. change display setting
0CUSTOMER display as Key only
ZCUSTOMER display as Text only.

Display BEx query in iFrame (non portal)?

Hi,
We're currently having trouble displaying a BEx query URL in an iFrame outside of the portal. Meaning, we have a different application web server that is attempting to point to the URL from the SAP server.
When we simply paste the URL in the web browser, it's not a problem; so the URL is ok. However, when we include the URL in an iFrame, the portal login screen appears, but soon after you log in, the page loops infinitely through the same request and never gets to the intended page.
Has anyone run into a solution for this situation?
Thanks

Hi,
Check this link....might be useful to ur reqq..
Access BEx Queries through non-SAP Portal
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/d08b00d73001b4e10000000a11466f/content.htm
Hope this helps u..
Best Reards,
VVenkat..

Display Bex Query in Web

Hi,
I want to display the Bex query directly in web.What are the possible ways that i can do, for the user to view the report in the web.Can anyone tell me how to configure RRMX in this case or how to do the settings for user to navigate from user menu to the required BW report directly from the SAP work bench.?I have tried linking from User Menu where the java servlets blocking the navigation.? Do i need to follow any configuration for this too?
Thank You,
Edited by: sunanda G on Feb 28, 2011 9:59 AM

Hi,
There are multiple ways to display the query in Web:
->Web Analyzer: In the query designer you need to click on the web symbol it will take you to run the query in web in the explorer. For this your server need to be setup contact your basis team for the same.
->WAD: After creating a query, you can display the same using Web application designer. Here you need to check the Java Settings to be installed.
->EP: You can copy the link generated from the query can be copied and displayed in the Enterprise portal.
There is a search option available in the SDN , you can search for more information regarding the same.
Hope this helps...
Rgs,
Ravikanth

0repmode "Restatement" value is not available in the BEx query

Dear SEM-BCS experts,
We need to select 0repmode "Restatement" value in a BEx query, but it is not available (only # and Standard). The query is based on the SEM-BCS virtual cube. We use SEM-BCS version 6.02.
I would be grateful if you could help us to resolve this problem.
Mila

Dear Mila,
Report mode. "Restatement" availability purely depends on the settings made for
the transaction data transfer ; between Transaction cube (BCS cube) to Reporting cube (BW cube).
Please check in the info package created for Transaction cube(BCS Cube) where in you can see the available options. If the data transfer is happening with reporting mode "Restatement" then it should be available.
Most of the people use one Standard (S), Purchase (P).. but Restatement (R) option also available.
Hope this will give you clarity.
Thanks
kamal

Using hierarchies from SAP BW BEx Query in BO Universe

Hello,
I'm trying to use a hierarchy (e.g. a simple customer class hierarchy) which is a part of a BEx Query in a BO Universe. But until now I have not found a way to get a hierarchy from a BEx Query working in a BO Unvierse.
1. Is it generally possible to use hierarchies in BEx Queries with a BO universe? (at the moment I can see all characteristics and keyfigures from the query... but I can't see the hierarchy levels for the characteristic)
2. If 1) is possible: I want to use a hierachy variable to select a hierarchy depnding on the user who is using a report... that's not a problem in BEx. But: Is it possible to use this query/scenario with a BO universe? Does the BO universe update itself automatically if the hierarchy has changed in a BEx query?
I've tried it with SAP BW 3.5 and SAP BI 7.0. BO Release is XI 3.0. Unfortunatelly without result.
Regards,
Thorsten

Hi Thorsten,
1) Hierarchies are mapped in the same way as custom-made universe hierarchies. When a hierarchy is defined on a characteristic in the BW Query, Designer creates one hierarchical structure in the universe, with a subclass for each level in the hierarchy. The structure depends on the current BW Query definition.
2) If the number of levels in a hierarchy changes in the BW query, you must update the universe. In the universe connection select *Use Single Sign On when refreshing
reports at view time* to allow the user to benefit from SAP SSO.
Hope this helps
Jacques

Crystal Reports and values list of BEx variables

Hello.
I read this - http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements
And there are writed in wiki:
"List of values for SAP variables are created automatically by Crystal Reports only when you use SAP Toolbar to create the report:
The list of values for a variable in Crystal Reports will be static, but the list will be always dymanic in InfoView as long as you use BW Publisher (save reports to BW, publish to BOE)and you logon to BOE using SAP Authentication."
I have two link to BEx queries from my CR report - and my variables have not values. I think that I don't use "SAP" menu when created the report.
But... what I can doing now? Is way transform "simple" report into "SAP" report?
May be is way create "SAP" report and after it copy all content of old report into new "SAP" report including all objects, formats, formulas, connections?
May be is way load values list from BEx query with "simple" reports?
And another question - I see that in list I get texts and codes but showing only texts in run-time. Can I tune CR for show codes too?

Post to Integration Kit SAP forum

BEx Query Columns come back in different Order after drill?

I have a strange effect when I work with BEx Queries in Xcelsius.
On default, I open and display the Bex Query "A". Columns are in order like defined in BEx Designer (Column1, Column2, Column3.....)
I want to do a drill, and so in Xcelsius BEx Connection settings I set the Filter on Field "X" in the XLS and in "Query Usage" I addionally apply the setting "Refresh when Trigger Cell "X" changes".
Starting the report works fine. But when I do the drill and the Query refreshes, the BEx Query Columns come back in different order?!?
It looks as if Column 2 and Column 3 are exchanged.
How can I fix that?
Thx,
B. Wegner

After some testing....
This issue is independent from the filter value. But it only seems to occure when a second BEx Query connection is defined.
The BEx Query Data Columns come back in different order after
- Refresh on Trigger
- Refresh after XY Seconds
Any Ideas?
Edited by: B.Wegner on Nov 16, 2010 3:42 PM

No exclusion for hierarchies in BEx query

I am trying to determine why a hierarchy cannot be excluded in a BEx filter.
We have a profit center with a hierarchy and sub-hierarchies under the main hierarchy.
I have a BEx query setup so the profit center is in the Free Selection area. Under the Properties section the main hierarchy is set and the Activate Hierarchy Display option is turned on.
When I run the BEx report and access the filter, I can see the hierarchies and sub-hierarchies, but there is not option to exclude a sub-hierarchy (red dot).
Is this normal or am I missing something?
Let me know,
Bill

Hello Yi,
I don't know about the message in the trace. Try running the query in transaction RSRT first. Check the BW statistics in table RSDDSTAT. If QDBSEL and/or QDBTRANS are 0, then there's probably some incorrect restriction in your query.
You can also do a SQL trace and check if the big SQL statements return some records. There have been cases where the database did not work correctly (see SAP notes).
Regards,
Marc
SAP NetWeaver RIG, US BI

Hierarchy Level value displayed in BEx Query

Similar Messages

Maybe you are looking for