High Level of Frustration on This Board With CS4

There is a very apparent level of high frustation evident on this board among the various message strings regarding the terrible overall performance of CS4. There are so many bugs reported I just can't keep track.
We have people insulting each other and talking about a class action lawsuit. And what does Adobe do? Laugh themselves to the bank as they have signed us all up as Beta testers who paid for the privilege of testing this crappy version.
I have used Premiere from version 6.5 and watched it evolve. Each version had its startup problems, but none as frustrating as this one.
I would not mind being a Beta tester but I object to having to pay for the privilege.
What does Adobe say?

The English language is rather strange:
There is no egg in eggplant nor ham in hamburger; neither apple nor pine in pineapple. English muffins weren't invented in England nor French fries in France. Sweetmeats are candies while sweetbreads, which aren't sweet, are meat. Quicksand works slowly, boxing rings are square and a guinea pig is neither from Guinea nor is it a pig. Why is it that writers write but fingers don't fing, grocers don't groce and hammers don't ham?
If the plural of tooth is teeth, why isn't the plural of booth beeth? One goose, 2 geese. So one moose, 2 meese? Doesn't it seem crazy that you can make amends but not one amend. If you have a bunch of odds and ends and get rid of all but one of them, what do you call the thing left? Is it an odd, or an end?
If teachers taught, why didn't preachers praught? If a vegetarian eats vegetables, what does a humanitarian eat? In what language do people recite at a play and play at a recital? Ship by truck and send cargo by ship? Have noses that run and feet that smell?
How can a slim chance and a fat chance be the same, while a wise man and a wise guy are opposites? You have to marvel at the unique lunacy of a language in which your house can burn up as it burns down, in which you fill in a form by filling it out and in which an alarm goes off by going on.
English was invented by people, not computers, and it reflects the creativity of the human race, which, of course, is not a race at all. That is why, when the stars are out, they are visible, but when the lights are out, they are invisible.

Similar Messages

I am new to Windows 8 and would like to view my .pdf's (like I could in Windows XP) on a window I can shrink so I can open additional software and shrink so both pages are open next to each other on the window. I am very frustrated at this point with Wi

PLEASE HELP!

Many people have this experience with Windows 8, which is becoming a byword for unpopularity.
Still, a bit of basic understanding is important. People have got used to just getting a new version of Windows and using it, without training or study. Not any more, thanks to Microsoft's bright ideas.
Here are some very crucial things about Windows 8.
1. Windows 8 has a new kind of app (program). These new kinds of apps take over the whole screen. Microsoft thinks these are the future. I won't tell you what I think. Except, if this new world is so great, why don't Microsoft use it for their own Office apps. A
2. The old world of Windows 7 and before is still available with most Windows 8 computers, except some cheap tablets and phones. Microsoft like to call this an app called "Desktop" which is really all of the old-fashioned, windows-can-be-resized, apps together.
3. Most apps are "new world" or "old world". Everything in the App Store is new world - that's the rule. A few apps (like Internet Explorer) can run in either world.
4. Windows 8 comes with a PDF reader "out of the box". This runs only in the new world and it's called "Microsoft Reader". Don't bother with it.
5. Adobe produce a "new world" PDF reader called "Adobe Reader Touch". Marginally better than Microsoft Reader, it's just not a patch on the old one; there are loads of things it doesn't do, and worst of all it's always full screen because Microsoft said so. No need to use it. Just download the old world Reader from http://get.adobe.com/reader as usual. (Be sure to turn off the unwanted "free offers"!!)

Same issue all over this board with HP Printer! Where did your quality go, HP?

I have an HP Photosmart 6520 that is used to print less than 20 pages per month. Now the black ink will not print. I just spent $$$$ to replace all the cartridges and still have the same issue. The cartridge is not clogged. I have aligned the print heads, etc. and performed all the necessary troubleshooting. I am so disappointed.
I have always been HP brand loyal, but when I have to buy a NEW printer since this one has obviously failed after 13 months, it WILL NOT be an HP. I also have an HP 3051A that is a cheap piece of junk. I rarely use it but it won't last long either. Cheap plastic. Where did your quality go, HP?
So now what? Out of warranty. Out of luck. Out $ for cartridges and a printer that should have lasted longer.

@angieeb
Thank you for using HP support forum. I have sent you a private message. If you're not sure how to check your private messages please click here.
Thank you,
Omar
I Work for HP

Needed help in high level design approach of this service

I have a two Proxy services proxy service A and Proxy Service B
Proxyservice A takes the XML request from the consumer and puts the message in JMS queue(queueA) and gives an immediate acknowldgment. Proxyservice B(Async) picks that message from queue and invokes the provides, if we get any binding fault or remote fault 5 retries are made (Proxy service XA enabled and if proxy service gets errored out then message remains in same queue) and message is put into error queue( if we get any business fault the message is put into undelivered queue no retries needs to be made). So whenever the message is put into the errorqueue an email notification must be sent to the sustain team. And then the ,message needs to be moved back to the queueAso that the message gets processed again
Your help is appreciated. Need urgent help on this.
Thanks,

I have a two Proxy services proxy service A and Proxy Service B
Proxyservice A takes the XML request from the consumer and puts the message in JMS queue(queueA) and gives an immediate acknowldgment. Proxyservice B(Async) picks that message from queue and invokes the provides, if we get any binding fault or remote fault 5 retries are made (Proxy service XA enabled and if proxy service gets errored out then message remains in same queue) and message is put into error queue( if we get any business fault the message is put into undelivered queue no retries needs to be made). So whenever the message is put into the errorqueue an email notification must be sent to the sustain team. And then the ,message needs to be moved back to the queueAso that the message gets processed again
Your help is appreciated. Need urgent help on this.
Thanks,

High level description of why an Enterprise Admin account is required for DirSync config

Hi all,
I understand that as part of the Azure AD Sync tool config wizard you are required to enter the credentials of an Enterprise Admin account. These credentials are required for the creation of the MSOL_AD_Sync service account within the Users OU of Active
Directory. This account is granted read and synchronization permissions to the local Active Directory.
Is someone able to provide a high-level description of what this actually means i.e exactly which permissions are granted and on which objects. Are we talking about having to modify the permissions of every single object within Active Directory?
Many thanks in advance,
Graham

Hi,
To start with, I guess you would know that this is a Kind of a Temporary.
I have some details from previous conversations and blogs
Hope this puts some light on your query.
When configuring the Microsoft Online Services Directory Synchronization Tool, you are asked to provide the credentials for an account that has
Enterprise Admin permissions on your organization's local Active Directory directory service. It accepts credentials in either of the following forms:
[email protected]
Example\someone
These Enterprise Administrator credentials are not saved. They are erased from the computer's memory after the service account is created.
How the Active Directory Credentials Are Used
The Microsoft Online Services Directory Synchronization Tool Configuration Wizard uses the Enterprise Admin credentials to create the directory
synchronization service account, MSOL_AD_Sync. This service account is created as a domain account with directory replication permissions on your local Active Directory and with a randomly generated complex password that never expires.
Note:
Changing the password associated with the service account is not recommended.
How the Service Account Is Used
When the directory synchronization service runs, it uses the service account credentials to read from your local Active Directory and write to the
synchronization database. The contents of the synchronization database are written to Microsoft Online Services using the Microsoft Online Services credentials requested on the
Microsoft Online Services Credentialspage of the Microsoft Online Services Directory
Synchronization Tool Configuration Wizard.
Note:
If you add a domain to your Active Directory forest, you must run the Microsoft Online Services Directory Synchronization Tool Configuration Wizard
again to add the new domain to the list of domains to be synchronized.
Thanks & Regards
John Chris

High-level interrupt handler

Why can I decide to support a high-level interrupt or not? Under what condition does the Solaris kernel will map my hw interrupt (INTA from PCI bus) to a high-level interrupt? When should I refuse to support a high-level interrupt? Why? Can I force my hw interrupt to be a high- level interrupt?
Also think about that, most hw interrupts indicate something important such as the case buffers are full. If they are assigned below the scheduler's, it really does not make sense.
Is it possible to block any hw interrupts? Or I'd put it this way can I prioritize hw interrupts in Solaris?
Thanks
tyh

Hi,
On x86 each IRQ has a software priority assigned to it implicitly by the bus driver, although I think you could override it in the driver.conf. Unlike SPARC, the processor doesn't support a PIL so software priorities are implemented by masking all lower-priority IRQs and re-enabling interrupts.
High priority interrupts, above dispatcher level, run in the context of the current thread on the cpu, normal level interrupts are handled by interrupt threads.
The interrupt threads are the highest priority threads on the system, so will preempt any other running threads. In addition mutexes in Solaris use priority inheritance, so the interrupt threads will get to run.
In general, high level interrupts are allocated to devices with small buffers such as serial or floppy, so that their buffers get serviced in the fastest possible time. Others can afford to wait for just a bit.
Your driver should check to see if its device has been allocated a high level interrupt. If this is the case, the high level handler should clear the interrupt and save the data/status (in the driver state structure perhaps) and trigger your soft level interrupt handler (which will run as a thread).
Blocking of interrupts is done for you when you acquire a spin mutex (ie initialised with an iblock cookie). Such a mutex is required to synchronise access to data shared with a high level handler in your driver.
Please take a look at the Intel Driver writers orientation at:
http://soldc.sun.com/developer/support/driver/docs/Solaris_driver_models/index.html
Hope that helps,
Ralph
SUN DTS

Higher level item category & Usage

Hi All,
Can some one please provide a detailed explanantion on higher level item category and usage with an example.
Best Regards,
Ramesh

item cat detm
order type   + item cat group + high level itemcat + usage =   item cat
in an order item cat is determined in the following way
order type     = manually enterd at intial screen level
item cat grp = picks from MMr sales org 2
<u>high level item cat</u> = this is picked from sales oder line item ITEM CAT FEILD ok
ex -- in a sales order u have 3 line items
1 mat1    TAN
2 mat2    ZTAN
                              here z tan is determined by OR + NORM + TAN + - = ZTAN
means the higher level item cat of line item oder can also influence the next line items item catg if maintained in vov4
usage = even this place a vital role in determining item cat
you can find this field in CMIR customer material info record from wher you ge thtis field
ex if you maitain usage in VD51 then
OR + NORM + - + - = TAN
OR + NORM + - + xxxx = XTAN
this xxxx(usage) is maintained in VD51 from where the system picks up and checks wether a proper item cat is mainted for this comb in VOV4
ok

No authorization for this transaction with movement type 601

Dear All,
This is chandra i am getting this error in delivery level " No authorization for this transaction with movement type 601. If give the authorization for SAP ALL its working fine. If give the authorization for SAP SD T.Codes i am getting this error. Plz help me.
Thanks and regards
Chandra

Dear Chandra,
Check with -
T. Code: OMJJ
Select Movement Type: 601 and Double-Click: "Allowed Transaction" (From Left-hand side) .
Check whether the Transaction is allowed for Movement Type 601 or not
Note: if Transaction is not listed (i.e. not allowed) and you wanna allow this Transaction with Movement type 601, then -
Up-there, Tab: New Entry. Click on it.
Maintain entry as:
MovTy: 601
TCode: As reqd.
and Save.
Best Regards,
Amit

Release Code 99 High Level Release

Hi Guru's
I have a question about release codes in config. It seems as if in the config I am looking at, someone has set release code 99 (High Level Release) on several of the levels. Does High Level Release mean that this code can release any/all amounts? If not, what does "High Level Release" mean.
Thanks in advance. Points will be given.
SW

HI Steven,
Assingning release code as 99 mean, it is not the highest no of SL no.
Release code means uniquely identfication of a certain User login under one Release Group. Based on this release stragey (Approval procedures) will be set.
It doesnt mean that assigning Rel. code as 99 becomes as a Highest release level.
Actually there are only 8 release levels will be there, in that 8 levels sequence 8 is teh highest level of authorization and 1 is the first level authorization., in that we can assign this Release code 99 either as 1 or 3 or even 8.
if it is solved ur problem pls rewards points.
Thanks
Muralidharan

HDMI Audio not working on Q190 (along with all higher level Audio Formats)

Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

Hey guys,
I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of '

When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations.  0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'.  0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed.  0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed.  0 0

Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
set the impersonation to your heart content as long as the right permission has been set on the analysis server.
In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
not have permission in Project Server I believe.
Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
Hope this helps.

Sales order display-how to change color of item with high level 0

Please does anyone know how can i chenge the color of item with high level 0 in display of sales order in red or yellow so it can be seen better for better searching on page?
thank you in advance...
regards..

You'd probably have to do a modification in SD for that. But what you can do, is make the higher level item not changeable. You could also set the display range to UHAU to only see the main items, do this in transaction VOV8. Or you could change your item category in VOV7 only to show main items.
good luck

Service item not relevant for pricing if used with higher level item catego

Hi,
We have a service item e.g S900 with Item category ZTAD.
This line Item automatically creates a Service Order.
Requirement is , if this service item is used with an Equipement Item,
Item 10 --> Equipment
Item 20 --> Service
--> There would be price required for the Equipment ( Condition type ZPRO - Mandatory )
--> System should not ask for the price of Service Item, as it would be inclusive in the Equipmetn charges.
--> In short if the Service item is used as Sub item with Equipment, it is not relevan for pricing.
I tried copying ZTAD and creating a new item cateogry which is not relevant for pricing...would that be the correct approach, but facing several issues related to Automatic Service order generation.
what could be possible ways to achieve above.
Regards
Trupti Deulkar

Hi,
System will ask the price for item category TAD bcoz service also chargble,in your case insted of TAD use TANN as free,
You can define based on your higher level item category for Ex : OR + Normusage(Blank)Higherlevl item (Blank)= TAN
you can config like this ORNormUsge(Blank) + TAN = TANN
like this you can do it this correct way or els you can manually enter the item catagory (TANN) at sale order line item level.
Thanks
Vinayak.
Edited by: vinayak4all on Jul 12, 2011 2:45 PM

Multiple hierarchies with a shared higher level in OBIEE

Hello all,
I'm trying to create multiple hierarchies for a shared dimension in OBIEE. I have gotten these to work in the past when each hierarchy for the dimension all shares the common “grand total” level at the top, but I now I'd like multiple hierarchies that share a common higher level that isn't the grand total level.
Here's what I'm trying to do with a Customer Geography hierarchy. I want to give the user the option to drill from the customer "Country" and go either into "Cities" or "States":
Grand Total level
--->Country level
------> State level
---------> Customer detail level
------> City level
---------> Customer detail level
So "Country" is the common parent of "State" and "City", and "State" and "City" each have" Customer detail" as the lowest level. The Admin Tool let's me build exactly this in my RPD (with no errors/warnings), but when I go to drill on Country in an Answers report, I don't get the option to navigate down to State or City; it just automatically drills into the underlying states -- never shows cities.
I guess I was hoping there'd be a pop up option to ask the user which path I wanted to drill down on (kind of like what shows up for multiple navigation targets in an Answers request).
Am I missing a setup step in my RPD for this multiple hierarchy? Is a shared higher level multiple hierarchy even possible in OBIEE?
Thanks,
Jeremy
Edited by: OBI Wan on Mar 19, 2009 3:29 PM
Edited by: OBI Wan on Mar 19, 2009 3:30 PM
Edited by: OBI Wan on Mar 19, 2009 11:20 PM

Thanks mma for the help. I thought I saw in your reply this link as well to RittmanMead, but it's not showing up now?
http://www.rittmanmead.com/files/Advanced%20Development%20using%20OBIEE%20(ODTUG%202008).pdf
Anyway, on slide 37 of Rittman's presentation, that screen shot he has of Country, City, and State is exactly what I am attempting to do. I was hoping my issue would be a bit more straightforward than the recommended ragged hierarchy work arounds, but I may still have to do something like that in the end.
This issue just seems more simple than ragged hierarchies, because I start from the same level and end up back at the exact same level (instead of different destination levels as can be the case in ragged hierarchies). I don't know -- maybe my example is ragged as well.
If Rittman got that hierarchy in his screen shot on slide 37 to work like I'm trying to, then that would be perfect. :)

High level contract and orders created with reference

Dear All,
The client is an integrated flat steel manufacturer. They have entered into quantity contract with high level products like for example Hot rolled coils + Cold rolled coils + Heat Treated plates 5000 T per month. There is no clear cut quantity breakup of each product. On monthly basis customer releases purchase orders with exact grade and dimensions. The requirement is to capture contact for 5000T and create orders with reference to the contract with necessary completion rule. Since exact break up of the high level products is not known controlling of order quantity to 5000T will involve lot of manual intervention. I was thinking in the contract we have high level material "X with 5000T and orders created with reference with actual materials like Hot rolled coils, Cold rolled coils and exact dimension/grade mentioned. Is this possible to have different materials in contract and order with enhancement?
Any other idea of fulfilling the requirements is welcome.
Thanks,

Hi Ramesh,
Go through EKPO there is a Table BANFN it will update when you create a PO with reference to PR
Do se11 > Table EKPO> CtrlShiftF10 > Assign any of PO no. in the EBELN > Execute > you will find BANFN table
it indicates Purchase Requisition Number. it will update when you create PO with reference to PR.
Regards,
Vraj

High Level of Frustration on This Board With CS4

Similar Messages

Maybe you are looking for