Histograms in BEx
Hi,
I would like to know if any one has experience with creating Histograms (Charts) in BEx. Here is the information:
1. I have a keyfigure "Quantity" in a Query for a
Characteristic "Cost Center" and a time char.
2. The Quantities range from Zero to 50.
3. Now, the requirement is to create "Bins", for
example Bin1 = Count of Qty 0 to 5, Bin2 = Count
of Qty 6-11, Bin3 = Count of qty 12-17 and so on.
4. Create a Histogram with "Bin Values" on X-axis
and "Number of Occurrences" (Counts) on Y-axis.
I appreciate any help on this.
Thanks
Srini
Hi Srinivas,
is the range of quantities in general from 0 .. 50 ? In this case create a new worksheet and insert your query.
Then define a cell-range anywhere out of the query-cell-range and summarize your "bins" in these cells via Excel-formulas.
By inserting a query in a worksheet these sheet gets added a VisualBasic-Sub called "SAPBEXonRefresh(queryID as String, resultArea as Range)". Insert a small VB-Code, which creates a Chart out of the "Bin-Cell-Range".
A good idea to create this code is turning on the Macro-Recorder in Excel, inserting the Chart with your preferences and turning off the Macro-Recorder. Then transfer this part into the above called Sub.
I know, it's a dirty and hard-coded trick, but it works and reading this is more difficult than doing
Bye
Ralf
Similar Messages
-
IF and ABS condition statement in BEX query designer
Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
ArnoldHi Arnold,
Thank you,
Nanda -
Inconsistency between Bex and Back end
Hello, I have a query about bex issue. I have few fields in my DSO/Cube which has data showing correctly in the back end but in Bex it shows partial of those values. like if i have something like this:
ZField
000000000000000000008
It shows correct in DSO table but in Bex it only shows the zeros. do you know why and how to get this to show the whole field value?
Thanks.
By the way this is a characteristic and not keyfigure.Hi Vekant,
If you have not did any speecific thing at query level then value should be shown correctly.
Please try this once and check.
Create new test query on your data target drag and droup your charecteristic.please execute your test query and see if you are able to see the correct value.
try this.
Regards,
Ganesh Bothe -
Error while trying to Open and Delete a BEx Query in Query Designer.
Hi Experts,
I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
"An error occurred while communicating with the BI server.
As a result of this error, the system has been
disconnected from the BI server.
Detailed Description:
STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
Details text is as below:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I have tried with SAP Note 899572, but still it's the same.
Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
Your time is much appreciated.
Thanks,
ChanduArun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu -
Report performance while creating report on BEx
All all!
I am creating a report on BOE 4.0 on top of BEx connection as a source. I have developed reports on top of universe in the past and i know that if we keep calculations on reporting end it hampers the report performance. Is this the same case with BEx? if we are following the best practices is it ok to say that we should keep all heavy calculations/ aggregation on BEx or backend for better report performance.
Can you guys please provide your opinion based on your experiance and knowledge. Any feedbacks will help! Thanks.Hi,
Definitely best-practice to delegate a maximum of CKF to the Cube where possilble, put RKF in the BEx query, and Filters too.
also, add Default Values to your Variables (this will speed up generation of the bics transient universe)
also, since Patch2.10, we are seeing some significant performance improvements reducing 'document initialization' and 'time to prompts' by up to 50% (step such as these often took 1.5 minutes, even on sized systems)
Also, make sure you have BW corrections like this implemented: 1593802 Performance optimization when loading query views
In the BusinessObjects landscape - especially with BI 4.0 - it's all about Sizing and Tuning . Here is your bible the 'sizing companion' guide : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000738725&_OBJECT=011000358700000307202011E
Pay particular attention to BICSChunkSize registry settings
Also, the -Xmx JVM Heap Size for the Adaptive Processing Server that is running the DSL_Bridge service.
Regards,
H -
Hi
I created a query in Bex-Query Designer - 3.5.. Then publish that report in the Web by using Bex-Analyzer.
Suppose i have columns in the report like 'vendor' and 'PO Number'. When the cursor goes to 'vendor' column heading then im getting as <b>"Context Menu for vendor"</b> by default.
i dont want by default .. I want to make this by custome (like i want Vendor Analysis) . How can i get this
please let me know
kumarHi ravi
Yaa im asking same thing. When i put cursor on the 'vendor' or 'PO number' then im getting "Context Menu for vendor " or "Context Menu for PO Number" by default.
I dont want this one. I want custom one like "vendor Analysis" or "PO Analysis".
How can i get this one . pls let me knpw
i ll assing the points
kumar -
How can we remove the commas from the Formula value in SAP BW BEx query
Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards -
Concatenation of Data from 4 infoobjects into a single cell in Bex Report
Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
<b>****Points will be awarded***</b>Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
<i><b>****Points will be awarded****</b></i>
Regards,
Hitesh Shetty. -
Variable screeen popup with button in bex
Hi ,
When I try to display variable screen using a button in bex, I get the following error. has anyone come across this. pls advise.
BExItemButton.RenderData01: Unable to get the Item property of the OLEObjects classErr: Unable to get the Item property of the OLEObjects class
KartheekSounds front end related, are all your Front end patches (FEP) upto date. Might be worth downloading FEP 11.
Cheers,
Pom -
Error while running query in BEx
Hi Experts,
when i am running a query i am getting this error in BEx: "Value 'First NameAPPROVER1' (hex. '004600690072007300740020004E0061006D00650041005000') of characteristic ZZNAME1 contains invalid characters,Error while reading data; navigation is possible
I>> Row: 121 Inc: EXECUTE Prog: CL_RSDRV_SRVS_SID).
Please suggest how to solve the error.
Regards,
AKSINGHThanks All,
Problem Solved -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi -
Error while generating PDF - in Bex Web
Hi Experts,
I am currently having the issue that I receive the error "Error while generating PDF" when using the "Print Version" functionality. This problem only occurrs for the Bex Web Query. I know that the ADS service is configured correctly- The webservice test is successful and other applications (Guided Procedures, MSS) also use it successfully.
Please see below the excerpt from the default trace:
A message was generated:
ERROR
Error while generating PDF
com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
Message: 28
Stack trace: java.lang.ArrayIndexOutOfBoundsException: 28
at com.sap.ip.bi.export.xfa.impl.SizeCalculator.getColumnSizes(SizeCalculator.java:178)
at com.sap.ip.bi.export.impl.ExportController.setSizes(ExportController.java:220)
at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:611)
at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:408)
at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:336)
at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:453)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:105)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:252)
at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:3809)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:3867)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:3510)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3470)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2489)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:892)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:813)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:456)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
If you have any idea or clue it would be greatly appreciated.
Thanks in advance for every support,
JanHi Jan,
Most possible causes for encountering this issue are:
Possible cause:
- The ADS is installed on a plattform, that is currently not supported by SAP for ADS. Please check the avaliablity at: Product Availability Matrix
- Mixing of different Netweaver releases (NW04 and NW04s) -> This is unfortunatelly not possibble the J2EE engine release has to match with the ABAP stack release in order connect them properly.
- The ADS SP level does not match the J2EE engine SP level. -> Please update the software components to have the same support package level.
Hope this helps!!
Regards,
Arafat -
Is there a workaround for Photoshop CS6 Histogram?
I have noticed this and I am wondering if there is a more feasable workaround other than saving my work, closing the application and reopening the app.
Here are the steps:
Open a file (any file type compatible)
Open the histogram window
Open the layers window
If one layer / Background unlock
OR
Open file with multiple layers (image, mask, or adjustment)
In Layer window now deselect the background layer or all of the layers by clicking on the window below the layers (RIGHT under "Layer 0" in layer window)
The histogram changes to B&W histogram
The only way to revert to the previous Color display is to close PS CS6 and reopen it. Then you are back to the full histogram.
When editing multiple layers in files, or compositing, this is really an issue and slows down workflow.
Is there another workflow? I have attempted a couple workarounds but none have worked other than restart.
Any idea what is happening? or is anyone else running into this?
Just "Not selecting" is not an option.Seems like that has happened for several versions.
To get back to Colors without restarting photoshop cs6, you can go to Expanded View and choose Colors from the drop-down list. -
Error when starting Bex analyzer
Hi All!
We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer:
<install error> Missing ActiveX component: Business Explorer Global Services
Does anyone have a hint on what to do?
Thanks for your help!
Best Regards
Pontushi
try to check with SAPBEXC.xla
and take a look oss note 585643
may need to manual register .dll with regsvr32
Do an Installation check of the BEx Analyzer as follows:
In the bex analyzer menu, Business explorer -> Installation Check -> Once the excel sheet opens, press the start button to start the check. Check the entries in red to see any missing/old ocx, dlls. -
I am not getting the data in Bex from the cube
Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
BhaskarHi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh
Maybe you are looking for
-
How do I access the US store from outside of the US?
Program keeps defaulting to Italian and telling me my account name is in use by someone in the Stati Uniti. Grrr....
-
Adobe Flex Mobile + AIR - Custom iOS Build Setting
I am building some Adobe Flex Mobile application using Flex 4.6.0 + AIR 3.5 only for iOS This app involves some iOS Native Extension created also by me. The thing is that this ANE uses some third party framework (GD.framework from Good Dynamics Techn
-
I had the data from my PC transferred over to the Mac. Photos were in a "My pictures" folder and then I had a number of sub folders by event or year, etc. Now everything seems to be in a folder labeled "iPhoto Library" and when I click on it it opens
-
I have created a scheduling agreement for a material i want to cancel.
i have created a scheduling agreement with a material i want to use the material in a contract with another vendor, is there any way i could use the material or i have to terminate the scheduling agreement and create the contract. in case of cancelin
-
How to enabale trace in Easy DMS ?
Hi, I used BADI: DOCUMENT_MAIN01 & method: ASSIGN_NUMBER to assign document number. Now am creating document through Easy DMS am getting error "Exception Occurred". How can i find, where is the problem ? How can i enable Trace option in Easy DMS ? I