Hit Counter For Web Site

I've published a site to .Mac for a friend, and her domain name, which is hosted on godaddy is being forwarded to the .mac site. I'm using masking so only her domain name shows in the address bar of each page. That's all working well.
I've added a hit counter through iweb to the first page but it won't show up when I go to the site by using the domain name. If I go to it using the .mac address it shows up. What's odd is if I go to the site first by using the .mac address where the counter always shows up then go to the site by putting in the domain name it will then show up there as well. If I go to the site again later by the domain name-no counter. If I repeat this by using the .mac address first then going back, it's there.
I read other past posts about this issue but I didn't see if it could be completely resolved. I normally use Safari but even when I use Firefox it doesn't show up either.
Can anyone help?
John

John:
If you added the hit counter from within iWeb then that's the reason it doesn't show up. It will only work on the .Mac server.
What you need to do is use StatCounter.com. It requires some post publication editing of the page that you want the counter on. If you make changes to the page later on then you'll have to reedit the page again.
What has been suggested is to put a text box with "STATCOUNTER" in it where you want the counter to appear. Then in the post publication file, search for STATCOUNTER and replace it with the code that the site provides you.
With that you can get daily, weekly hits, a world map of where the hits came from and lots more. There's a variety of text or image counters.
In this site, Old Toad's Tutorials I put the STATCOUNTER in the main text box at the bottom and make the text orange. When I added the counter, it comes up in the text and color that I chose. If you put it in it's own text box, you can use the stye that StatCounter provides when you set up the counter.
Do you Twango?

Similar Messages

Hit Counter For Web Site Now Working?

I have a web site that was published with iWeb 06. I am using a domain name at GoDaddy and forwarding to .Mac using masking so the site shows with the domain name not the .Mac address. If you went to the site by entering the domain name the hit counter on the first page would not show. However, if you entered the .Mac address to go to the site the counter would show.
Well the site was republished and upgraded with iWeb 08. Recently I noticed that the hit counter now shows regardless of how you go to the site. I was pleasantly surprised but when did this happen? Of course as others have noticed, on my .Mac home page on the side bar where the website pages are listed the counter numbers no longer show. So they took something away and gave something back?
John

I don't think Apple meant to take away the .Mac counter section of the .Mac page. I think it's a bug that they have yet to resolve. It would be interesting to see if anyone has asked Apple about this and if they gave a definitive answer?

How do i get a hit counter on my site

Hi everyone
Im looking for a we hit counter for my site, but it seems
like its abit more complecated than i want it to be, or am i
getting it wrong?
I have looked on the dreamweaver exchange, i dowloaded one
called 'visit counter v.1.0' by felixone, and it says its on the
server behaviours panel under the 'felixone' menu, but i cant find
the server behaviours panel.
Can anyone help? or does anyone have a good link to an easy
to use one?
Thanks

You realise that 'hit counters' are pretty old hat and look a
bit amateurish
on a site these days :-)
Check with your host, they may have a stats program that you
can view to
check out what hits and other information you can gather by
the visitors to
your site.
If you really want a hit counter, you may be ble to find
something at
www.hotscripts.com
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
~ Forum Posting Guidelines ~
http://www.adobe.com/support/forums/guidelines.html
CSS Tutorials for Dreamweaver:
http://www.adobe.com/devnet/dreamweaver/css.html
> Hi everyone
>
> Im looking for a we hit counter for my site, but it
seems like its abit
> more
> complecated than i want it to be, or am i getting it
wrong?
>
> I have looked on the dreamweaver exchange, i dowloaded
one called 'visit
> counter v.1.0' by felixone, and it says its on the
server behaviours panel
> under the 'felixone' menu, but i cant find the server
behaviours panel.
>
> Can anyone help? or does anyone have a good link to an
easy to use one?
>
> Thanks
>

I need Java code for a simple graphical hit counter for a webpage

I was wondering if anybody out there could send me some code for a simple graphical hit counter for a webpage. All the sites that I've visited are garbage and of no use to me. Please help me.
Colin

Not as easy as you'd imagine with applets. You need some way to store the hits, usually through a file on the server. That's not gonna happen in a hurry for 2 reasons -
- Applets can't read/write files
- Your web server usually won't let you run programs on their machine (ie, programs that listen for socket connections from applets, then load/read/write/close a file).
In short, no, there is no simple java solution (that I know of).
Cheers,
Radish21

Hit Count for a KM Folder

Hi,
Is there any way we can track the hit count for a particular folder in KM?
Is there any particular default event where we can listen for this?
Helps will be appreciated...
Regards
BP

Hi BP
This is the most recent information om KM statistics by Thilo Brandt:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0
I don't know if it is possible, but I'd guess it's possible to alter that code in order to get some statistics on folder-level as well as item-level.
Kind regards,
Martin Søgaard

Fire fow will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Firefox will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will lose all personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Edit Color Sync for Exports for Web Sites

Hi,
Perhaps this has been covered, but I've not found the thread. Most of the export color sync questions seem to revolve around printing or displaying on one's own monitor. Neither is an issue for me. However, I note that my RAW images exported from Aperture 2.0 as jpg's and then uploaded to web sites such as Jalbum and Orkut are washed out. Some forums have suggested this is due to those websites being optimized for sRGB. I understand that Aperture uses a proprietary color sync profile; however, my default EXIF - Expanded shows "Color Model" as simply "RGB", and "Profile Name" is Adobe RGB (1998) (my Canon 50D is set to sRGB). Again, I have seen suggestions on this forum that one can change these settings, but the process appears to be only for printers and monitors. Where/how can I change the export for uploading jpg's to the web.
Thanks,
Nick

I understand that Aperture uses a proprietary color sync profile
If the profile were proprietary, it would be an illegal profile under the ICC Specification.
However, I note that my RAW images exported from Aperture 2.0 as jpg's and then uploaded to web sites such as Jalbum and Orkut are washed out.
If you did not disable embedding of an ICC source colour space in Aperture, if you did not use a non-ICC enabled browser, the OS X system level services will set up a ColorWorld and convert the pixels in your JPEGs matching from the ICC source colour space to the ICC destination colour space of your display. Thus you will get what you uploaded in the first place.
I have seen suggestions on this forum that one can change these settings, but the process appears to be only for printers and monitors.
The idea is that each and every colour device is calibrated and that calibration is captured in a colourimetric colour characterisation from which an ICC colour device profile is computed. Colourants that form certain colours one one colour device at one calibration will form other colours in the same colour device at another calibration and in other colour devices at yet other calibrations. By means of device profiles, the COLOURS can be kept constant while the COLOURANTS are recomputed to compel the device to paint the closest possible match it is capable of.
Some forums have suggested this is due to those websites being optimized for sRGB.
The issue is whether people who post pictures do or do not embed ICC source colour spaces into their pictures and whether they pick browsers that are ICC-enabled or pick colour blind browsers.
To determine if there is an embedded ICC source colour space in a picture, download the picture to disk, open iApple Preview and select Tools > Get Info > Summary.
Colour Model: This defines the format or model of the colourants, e.g. three component RGB, four component CMYK.
ColorSync Profile: This defines the ICC source colour space. If there is none in the image file, the system level service assigns the Generic RGB Profile for model RGB, the Generic CMYK Profile for model CMYK and so forth. Therefore, any ICC source colour space than a Generic Profile source colour space is embedded in the image file itself.
In technical terms, the rule is that to construct a ColourWorld that does a colour space conversion through the PCS Profile Connection Space, you have to have an ICC source colour space and an ICC destination colour space (typically your display profile). It follows that the system level service ASSIGNS an ICC source colour space automatically where is none embedded. The ICC source colour space that is assigned when there is none embedded is the Generic RGB Profile for colourant model RGB, as explained.
/hh

Incorrect PDF scaling for web site jpeg files

So, I'm not sure if anyone else find this frustrating. When working on a new web design either in Illustrator or Photoshop, etc. and then exporting those to a jpg file, then taking those and combining them into a PDF file using acrobat, I'm seeing the PDF files being about 25% larger than their actual 72dpi web-standard size. So when I pass along the PDF to clients for review, I always have to add a disclaimer that they should set their PDF reader to about 75% to see the actual size of the web site files. 100% is far too big. Any idea why the correctly-sized image files, when imported into Acrobat are increased in size?
I've tried saving them as smaller files... I've tried the cropping feature... none of this seems to solve the problem. It's quite frustrating.
Best,
Russel

Hi,
In Muse, there is no button/widget which allows to upload contents to your site. I would suggest to use third party web form builder, like Jotform, Upload Field Allowed File Types and Embed the form code in Muse and that should work.

Spam filter for web site forms

Is there a way to stop junk mail from being submitted through
a web site form that is supposed to be used for customers
only?

P-C-Surgeon escreveu:
> Is there a way to stop junk mail from being submitted
through a web site form that is supposed to be used for customers
only?
http://recaptcha.net/
zerof
http://www.educar.pro.br/
Apache - PHP - MySQL - Boolean Logics - Project Management
Você deve, sempre, consultar uma segunda opinião!
Deixe todos saberem se esta informação foi-lhe
útil.
You must hear, always, one second opinion! In all cases.
Let the people know if this info was useful for you!

MsBuild for web site

Hello
i have a web site which is plain js and HTML5. I have publish.xml and publishproj using which i use the below command.
msbuild.exe website.publishproj /p:DeployOnBuild=true /p:PublishProfile=WebPub.pubxml /p:VisualStudioVersion=11.0
It is working fine and creating the zip but it is creating under users\Appdata\Local\...
Can i Specify output path something like "D:\Project\A" ?

Hi Mrityunjay,
Base on the doc: Common MSBuild Project Properties, try this:
/p:BaseOutputPath(or OutputPath) = ....
Besides you can also write the configuration to the proj file, see this for more information:
https://msdn.microsoft.com/en-us/library/ms164287.aspx
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Time and date clock for web site

hi all
I am very new and mean very new I am building my first wed
page and I am
looking for a date/time clock thing to add to the site
So the question has any one got one I can use or how do you
write th tag for
it
Cheers
Det

Well thanks for the spelling lesson on web. Well lucky I am
only doing a web
site for my motorcycle riders group and they all know how bad
my spelling
is.
Murry *ACE* thanks for the tips on how to find a clock
Cheers
Det
".: Nadia :. **AdobeCommunityExpert**"
<[email protected]> wrote in
message
news:e9vper$iid$[email protected]..
>
> "Tal" <[email protected]> wrote in message
> news:e9vp1g$hqm$[email protected]..
>> Murray *ACE* wrote:
>>> Before you can do a clock, you have to learn how
to spell "WEB". Try it
>>> now - W E B.... 8)
>>
>> my signwriter nearly put XXXX WED DESIGN on my car!
My friend picked it
>> up right when he was about to stick it on LOL - i
was very thankful - I'd
>> have felt like a complete twit driving around with
such a typo!
>
> Maybe your phone would have been ringing off the hook
with people
> wondering what the heck "Wed Design" was - your job then
would have been
> to convince them that you do excellent weB design and
that you actually do
> know how to spell - it was all a marketing ploy ;-)
>
>
> --
> Nadia
> Adobe� Community Expert : Dreamweaver
> -------------------------------------------------
>
http://www.DreamweaverResources.com
- CSS Templates|Tutorials
>
http://www.csstemplates.com.au
> -------------------------------------------------
>
http://www.perrelink.com.au
- Web Dev
> -------------------------------------------------
>
http://www.adobe.com/devnet/dreamweaver/css.html
> CSS Tutorials for Dreamweaver
> -------------------------------------------------
>
>
>

Best compression for web site

I would like to add a 2-3 minute segment of a longer movie to my web site. I use wordpress which only allows for a 2MB media clip to be uploaded. What compression in Compressor (or elsewhere) would give me such a small file? Or is there another route I can take...posting to you tube or vimeo or such?
Thanks in advance.

You'd be much better off hosting somewhere else and embedding a player into your wordpress page. Or find another web hosting solution.

Looking for web sites w/ advanced text search

A group of potential customers are looking for a powerful text search engine for a web-published database, and I proposed they use Oracle 9i and Oracle Text for this purpose.
They may be interested but they demand to "see it in action".
Can you help my find web sites which use advanced features of Oracle Text to produce near-natural language search ?
My potential customers' context is : They have a few hundreds of structured documents which they want to consolidate and web-enable.
The main audience might be people who rarely use Internet, so ideally the search engine should be capable of "natural language" search.
An expert thesaurus has been constructed by the customers already.
I think Oracle Text could be a good enough option if we can take advantage of the thesaurus and the documents being structured, but I don't know of any web site that use these features of Oracle Text.
Thanks a lot if you can help.

Try tahiti.oracle.com. A search engine for the Oracle documentation set using Oracle Text. Each documentation
release (e.g. 8.1.7) is about 300Mb of data (around 110,000 rows in the db).
There are commercial references for Oracle Text but I would prefer to have your email address so we can
follow up in a separate thread. Thanks.

Endpoint Monitoring for Web Site down / uncontactable

Hi,
As per title I want to set up an alert for when our Azure Web site is down / page we nominate is not available
So I set up Monitoring Endpoint and Stopped the Web Site via the portal
Problem is that it redirects to
http://www.azurewebsites.net/SiteUnavailable.htm and so the Endpoint thinks everything is cool and won't fire an alert
What am I missing ?
cheers
Andy

In "real life", when your endpoint is down, it will respond with Error 500 or a timeout. Case when you manually shutdown your site to test the feature is not really relevant. Get a page to generate an error 500 to test correctly.
Auto-scaling & monitoring service for Windows Azure applications at
http://www.paraleap.com

Putting password and counter on web site posted to Go Daddy

I have recently posted two web sites to GoDaddy and I would like to be able to put a password and a counter on the sites. Is there any way to do that?

I want to know that one too!!!!!!!!

Hit Counter For Web Site

Similar Messages

Maybe you are looking for