Home Audio System From Mac Mini

I need some ideas of the best way to set up a system of speakers through my house.
I have a display in the kitchen running off a Mac Mini and i want to install sets of speakers all around the house, but i also want to be able to control the sets of speakers individually.
Any help will be greatly appreciated. Thanks.

I'd be suggesting a mixing desk with 8 outputs which would allow this. Not sure about value for money however. any other suggestions?

Similar Messages

Audio Output from Mac Mini 2010

Hello -
I purchased a mac mini 2010 this weekend for use as a home theater PC. I've got it connected to an Onkyo tx-sr604 a/v receiver via HDMI. I then pass the HDMI signal from the Onkyo to my hdtv, so I think it just passes through. For audio, I use a surround sound system. And, in case it matters, I have a second tv connected via the DVI output on the mini.
The Onkyo indicates that the audio input signal on the HDMI is PCM Multichannel. When I play movies (e.g., Netfix or DVD) or music (e.g., pandora) on the mini, I don't get any sound on the center channel in multi-channel mode. In direct mode, I only get sound in the front left and right speakers. I'd like to have normal surround sound.
Is there not a way to get 5.1 surround sound from the mini? Or, am I missing a set up or something? If I connect my receiver to the mini with the digital audio output, will I then receive digital audio?
Thanks.

Welcome to the Apple Discussions!
Mike it is my understanding that if you want 5.1 Surround sound that you must connect the mini directly to the SS system and not pass the audio signal through another device.
Dah•veed

Audio output from Mac mini 2009

I have a 2009 Mac mini with mini dvi and mini display port outputs. Just bought an hdmi tv to use as the display. I understand audio is not supported out of the mini DVI, but what about the mini display port? I was thinking of using a mini display port to hdmi cable. Trying to avoid an additional cable for audio.

There are two 2009 Mac mini models, Early 2009 and Late 2009. I can tell you for sure that the Early '09 Mac mini does not have integrated audio from the mini-DIsplayPort. It was my understanding that the Late '09 Mac minis built in 2009 also did not have integrated audio, but those made in early 2010 did. The only way to know for sure would be to test it. Apple reports that some m-DP adapters are not adhering to the VESA standard and even Macs with integrated audio in the m-DP do not with these poorly made adapters. Apple is only recommending the Moshi and Griffin adapters.
http://support.apple.com/kb/ts3065
If your mini does not have integrated audio you can get a cool adapter that will solve that issue from Monoprice;
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=6331&seq=1&format=2
Dah•veed

Aiplay from Mac Mini to AppleTV with simultaneous audio on both

I just installed an AppleTV (2013) to my HDTV with Bose speakers connected to the TV. I can mirror my Mac Mini to the Apple TV and play Pandora music from my Mac Mini on Apple TV, but to do so I am using the Settings/Sound/AppleTV on my Mac Mini to play audio over the AppleTV. I have not been able to play Pandora simultaneously over both the Mac Mini speakers and the AppleTV speakers. The AppleTV is connected to the router by Ethernet. My desire is to play Pandora (and other audio sources) simultaneously over both the Mac Mini and AppleTV.

I can play audio on both the Mac Mini and Apple TV simultaneously by using ITunes and the Airplay icon from within ITunes. In ITunes, I select the Airplay icon and choose "mulitiple" and select both "computer" and "Apple TV" and have volume controls for both and each indiviudally. It works, so the devices are connected and Ethernet is not the issue. Is there a way outside of ITunes to play audio over both Mac Mini speakers and Apple TV speakers?

Is it a solution to use Apple TV and VoiceOver to play my tunes on my home audio system?

hi, i am visually impaired and want to be able to have voice access to browse my music so that i can easily play them on my home system. when i saw that apple tv supports voice over, this idea came to my mind to have an apple tv connected to my home audio system and share my library on my computer to be able to browse it using apple tv with voice over enabled. this way i have access to my music library and via voice. but i couldn't find a good tutorial to approve if my idea is correct or not. please give me feedback to know if my idea is a correct one or essentially it is not a good solution for such problem.
thanks a lot

Yes it should work ok.
I don't use it normally but once enabled Voice Over states the current menu position. If the position has submenus it says 'button'.
For example, I have 2 itunes libraries running currently.
As I scroll across the columns using a right keypress it says something like Main Menu and:
Movies (right keypress) Internet (right keypress) Computers
On pressing select on Computers the submenu opens showing both shared libraries:
AlleyCat Mac Mini
AlleyCat Mac Pro
The Voice Over announces 'Alley Cat Mac Mini, Button, One of Two'
Button seems to indicate a submenu.
Pressing down key on remote it announces 'Alley Cat Mac Pro, Button, Two of Two'
Selecting either library lists the media content categories:
Music / TV Shows / Podcasts etc (order may be different)
It announces say 'Music, Button, 1 of 6'
Pressing select ('button') opens the Music category.
You then have several subcategories inclusing Shuffle/ Search / Music Videos/ Album Artist/ Album / Genre/ Genius etc etc
I'd personally like Artist at the top but it should be easy to navigate down with a few clicks and you'll soon remember which menu number is your preferred category.
One say is Artist, there's Shuffle or similar at the top then all artists listed alphabetically.
So I have maybe:
a-Ha
ABBA
ABC
Academy of Ancient Music
Alanis Morrisette
Alisson Krauss
etc
etc
As you scroll down it says the artist name pretty well for most and says say ABBA, Button, 3 of 227'
Select takes you to the album/track submeny and process procedes.
The Apple remote is very simple and should work well, though i think the older white one is more tactile than the new silver one.
AC

Won't play in home audio system

My wife's 5th generation Nano will not play through my home audio system connected with a monster rca cable at the system end and connects to the ipod through the ipod connector (no sound comes through my system, only sound is from the nano speaker). It works fine in both boom boxes that we have. My classic ipod 30gb works fine in my home system.
Is there an adaptor that needs to be purchased?

Contact the vendor of your home audio system. They should be able to tell you the adapters you need.
Connecting iPod to your home or car stereo

Apple TV has no sound when mirroring from Mac mini,sound works when mirroring from iPad and iPhone

When I mirror from Mac mini to Apple TV there's no audio from Apple TV to my av amp,it works fine from iPhone and iPad,is there something I need to do in the airplay settings?

Here's what finally solved my issue:
https://discussions.apple.com/message/24436903#24436903
From this Apple Community User:
https://discussions.apple.com/people/Winston%20Churchill
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)
Apparently there is an issue if you push the Apple Remote before you set your computer to mirror. Whatever I did, it had locked it in that state. Once I stopped mirroring, then went onto the TV screen and restarted the Apple TV (#1 above) it then allowed me to choose mirroring on my Mac and the audio automatically switched from the computer to the TV (making the computer now mute), BTW the volume needs to be maxed on the computer as that will transmit to the TV if your volume is low on the computer. Then you can raise or lower it the way you want on your TV.
Yay!
Hope this helps others.....

Universal Adapter with Home Audio Systems

I recently purchased the Universal Adapter for my Ipod in order to make it easier to connect and disconnect from my home audio system. Things work fine when the Audio cable is directly connected to the port in the Ipod, When I place the Ipod in the Universal dock and try to use the "line out" in the dock, either no sound or very muffled sound occurs. Anybody have any ideas?

It seems likely that it will .I am expecting it to

No sound on my home audio system with universal dock

Hi,
I have 2 docks: the iPod dock and the universal dock.
If I use the dock with my home audio system I have sound - clear and loud.
If I use the universal dock I have no sound.
Does the universal dock only work with a remote?

If the home audio system is the same, the cables are the same, the iPod is the same, and the settings are the same, than I would assume you have a bad dock.
2.0GHZ G5/533MHz G4 DeskTop/400MHz G4 PB Mac OS X (10.4.3)

Initiating airplay from Mac Mini to AppleTV causes router to crash

Hi,
I have an AppleTV (new) and a Mac Mini (new), both purchased in the last few months. When I try to initate Airplay from my Mac Mini it crashes the network. Every device on the network loses internet. This can only be resolved by rebooting the router. I have tried this several times, but still no luck. Any help would be appreciated.

I can play audio on both the Mac Mini and Apple TV simultaneously by using ITunes and the Airplay icon from within ITunes. In ITunes, I select the Airplay icon and choose "mulitiple" and select both "computer" and "Apple TV" and have volume controls for both and each indiviudally. It works, so the devices are connected and Ethernet is not the issue. Is there a way outside of ITunes to play audio over both Mac Mini speakers and Apple TV speakers?

Audio output on Mac Mini Dual Core

The Mac Mini outputs both stedigital 5.1 audio.
MPEG4 video files encoded in H264 AAC 5.1 format do not output any audio when the Mac Mini is connected to a standard stereo amplifier.
Is there a way to force the output to standard Stereo instead of 5.1 digital?
RV

QuickTime Player and iTunes will really only play stereo without some additional hardware and software. The DVD Player.app and VLC Media Player can play AC-3 surround sound, but if you're not using them, it doesn't matter. You might try VLC. They should all automatically downsample to stereo if you don't have the hardware to play surround sound. I've never used Handbrake, though, maybe I don't understand how it works, but if you're encoding the audio from the DVD to AAC it should play audio whether you've got an AC3 amplifier or not.
-Doug

HT4889 Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it show up in the new Mac's computer folder. Help

Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK. Something about the Migration Assistant is being missed, but I have no idea what it is.
Help

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

How to transfer pages file from mac mini to iphone

how to transfer pages file from mac mini to iphone

If you have OSX 10.8 (Mountain Lion) installed on your Mac mini, set-up iCloud in your System preferences.
Peter

Can I install OS 10.4 DVD on G3 B&W (CD-ROM only) from Mac Mini with DVD?

I have G3 B&W 400Mhz 384Mb memory 9Gb hard drive.
It has CD-ROM, Zip Drive, Firewire, USB & Ethernet and currenty running on OS 10.2.
I'd like to upgrade to OS 10.4, but it's on DVD.
I also own Mac Mini G4 with DVD-RW, and I can connect it to G3 with Firewire using Target Drive Mode. G3 recognize Mac Mini as a hard drive.
Can I install OS 10.4 from Mac Mini? Thank you for your help!

zakuro7 wrote:
Can I install OS 10.4 from Mac Mini?
If you mean the 10.4 DVD is a full-retail copy for any machine, not the version that came with the Mac mini.
BDAqua wrote:
...put the Mini in Target Mode...
some additional info on Target Mode
http://support.apple.com/kb/HT1661

Widescreen w. DVI from Mac-Mini ?

I bought a new monitor (Philips 200W6CS) with 1680*1050 pixels , to replace a Belinea with 1200*1000 pix.
When connected to the mac mini it gave a very clear picture but only for only 5 minutes, ending in sleep-mode, or "no signal".
The same DVI-cable then still gives signal to other DVI-monitor,
The new 200W6CS does only work stable on VGA with same but less sharp 1680*1050 pix, .... and still with DVI from PC's.
The OS here is 10.3.7..
The video from mac-mini should support 1900*1200 pix...
What is wrong ??, and how to fix ??
mac mini, windows PC Mac OS X (10.3.7) Philips 200W6CS

I suspect if you dug into the details of the video timing for 1680 x 1050 you would find the dot clock is above 135 MHz. The mini is not stable above that level with certain DVI receivers. Probably you will have to use a program like DisplayConfigX or SwitchRes X to lower the pixel clock below 135. Here is a thread that may help.
http://discussions.apple.com/message.jspa?messageID=1707980#1707980

Home Audio System From Mac Mini

Similar Messages

Maybe you are looking for