Home Hub 3.0 vs Home Hub 2.0 packet loss

So I upgraded the BT package that our family is on today, and with it came the Home Hub 3.0. Happy right? Better wireless, less connection problems etc... No.
For some reason, since upgrading, I get random moments of massive packet loss. Up to 50% packets are lost for periods of up to 5 minutes. I've tried resetting the router, tried turning it off for ten minutes etc but still get regular moments of packet loss.
My internet is not interleaved at the moment so that could be a problem, however before switching to the 3.0 i never had any packet loss with non-interleaved internet (on the 2.0 homehub).
Could anyone help me?!
Thanks
Solved!
Go to Solution.

ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 03:12:19
Downstream:
7.813 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Fast
Noise margin (Down/Up):
9.1 dB / 24.0 dB
Line attenuation (Down/Up):
35.5 dB / 19.5 dB
Output power (Down/Up):
19.9 dBm / 12.1 dBm
FEC Events (Down/Up):
0 / 202
CRC Events (Down/Up):
91236 / 426
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
619777 / 655
Error Seconds (Local/Remote):
2173 / 506
est1 comprises of Best Effort Test: -provides background information.
Download Speed
4095 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 4095 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8000 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 4500 Kbps
I did a quiet line test and it sounded quiet.
Thanks for your answer, just hope someone can help me resolve it now

Similar Messages

Using your old BT home hub phones with the home hu...

If you want to use your old BT Home Hub phones with the new Home Hub 3. Here is a diagram showing how to do it.
Using your BT Hub Phones with your Home Hub 3
It may help people to utilise their old phones.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Solved!
Go to Solution.

There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Updated to the latest revision. Firefox will not display my chosen home page without clicking on home icon.

Since latest update...Firefox will not allow a new page to be opened from a link in a current page. It will allow a new tab to be opened (with tabbed browsing checked) but i prefer a new page. Even in tabbed browsing links to things like a pdf will not work at all.
Firefox WILL NOT close. X-ing out will close the window but I can not get back to Firefox without closing it in task manager.
Firefox will not display my chosen home page without clicking on home icon.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to know the list of patches applied to iAS Oracle home and 8.0.6 Home

Hi,
Please help me for the steps to know the list of patches applied to iAS Oracle home
and 8.0.6 Home;
as we can use ad_bugs, ad_applied_patches, OAM Applied Patches for Oracle Applications Patches list
and we can use opatch lsinventory for Oracle Database patches applied list

Thanks for sharing the answer. BTW, there are some exceptions like, determining Developer 6i patchset applied, and Oracle 9iAS version:
How to find the developer version
Re: how to find the developer version
Note: 186981.1 - Oracle Application Server with Oracle E-Business Suite Release 11i FAQ
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186981.1

I can't get back to my home screen? Is the home button broke?

I can't get back to my home screen? Is the home button broke?

A simple press on the home button should always get you back to your 'app-menu'. If this is not the case there is a problem. It is possible that your button is broken. Maybe you could try first to install the latest iOS version through iTunes if you haven't done already. Or try to reset your iPhone by pressing the power button a few seconds and then Slide to Power off.
Let me know if it works!

Home sharing on apple tv, Home sharing on apple tv

How do I set up home sharing on my Apple TV? It says it is on and the shared libraries show up on all the computers but not on the television

You need to introduce the same Apple ID in the Apple TV (home sharing option, not necessary on ATV's iTunes Store) and in the iTunes' home sharing (Advanced/Turn on Home Sharing)... and both connected in the same wifi or ethernet network. It's all.

How do I change the Home file name back to Home?

Help! - How do I change the Home file name back to Home? My supplier changed it to Demo. I've tried pressing return, control click and Get Info but none gives access to change the name. Any ideas?

The Home folder isn't named "Home." It is named for the user account it represents.
Who is your "supplier?" Sounds like they're not terribly bright.
Can you provide some details on why they "changed" it. Is this a brand new Mac? Were you having information transferred from another computer?
It sounds like you just need to create a new account and get rid of "Demo."
While logged into the "Demo" account, go to System Preferences in the Apple Menu.
Click on Users & Groups
If the padlock is locked, click on it and enter your password.
Click the + button at the bottom of the list of users. This will create a new account. Fill in the information you'd like to use for your account. The account name is what will be used for the "Home" folder.
Once created, select it from the list and check the box to "Allow user to administer this computer."
You can then log out of "Demo" and log in as your new user. If there is nothing in the Demo account that you want, you can delete it from the Users & Groups System Pref.

Does Konqueror Support Two Home Pages? File Manager Home, Web Home?

Konqueror is getting better and better as a browser and I was using it at length the other day. I really miss a Home page though - not just the first page loaded, but a page you can return to by pressing a Home button on the button bar.
Now Konqueror does have a Home button on the button bar, but it seems to only be configurable for the File Manager profile. Is there a way to have that one Home button go to your home directory when you are using Konqueror as a file manager, and go to a web page when you are using it as a browser?

Navigate to the webpage you like as homepage while you have started konqui in webbrowser mode, then click "settings->Save view profile 'Webbrowsing'"
Then konqi will startup with this site everytime you start it as webbrowser.
About the home button: I am sorry it can only have one function, but you could use the bookmarks toolbar for such things (as you may bookmark file system urls too)

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

In iweb I want my first(Home) page to have the Home link and an Enter site Link only. On the enter site page (second Home Page) is where all my links appear at the top. Can I do that?

In iweb I want my first(Home) page to have the Home link and an Enter site Link only. On the enter site page (second Home Page) is where all my links appear at the top. Can I do that?

Not easy...
Not really? Just uncheck the second checkbox for the first page and the nav bar is gone.

Home Stub is bound or Home object is bound in JNDI

Hi,
When I lookup Home i get home stub at client side. My question is what is bound in JNDI tree Home stub or object of Home implementation class which is implemented by Server?
thanx

My understanding:
It is the stub that gets bound to the JNDI. From the client side, we look up the JNDI for the home stub. The stub knows how to communicate with it's corresponding server object(Home) thru the skeleteon(I think the concept of skeleton in RMI is deprecated now..)

When I try to access one email acct.I get message that my acct. Is in use on another device. Only other device is computer at home and no one is home or using it. What do I do?

When I try to access my email acct. Message says that it in use on another device, only other unit is computer at home and no one is home? What's up?

Thanks but that doesn't give me the information I need. I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use. My Apple ID can be varified, just not the email that they will contact me with.

Why the scan lister and listener configure/start from GRID home why not from Oracle Home.

Hi
why the scan lister and listener configure/start from GRID home why not from Oracle Home.

> why the scan lister and listener configure/start from GRID home why not from Oracle Home.
Because Oracle says that's the way it has to be.
As @MohaAGOU said, starting in 11gR2, the Listeners (both SCAN and traditional) are now cluster resources. Let's start with the SCAN Listener. There are only 3 of them, even if you have 4 or more nodes in the cluster. If a node goes down and a SCAN Listener were running on it, Grid Infrastructure will relocate the SCAN Listener to a surviving node. Much easier to do this if the entire resource were in the GI home. Note that an instance cannot be relocated and it is running on a different home.
As for the traditional listener. The Listener itself won't be relocated during a node termination, but its VIP will.
Cheers,
Brian

IPhone 3GS Home Button Issue - iPhone Thinks Home Button Is Always Pushed

Alright, this isn't the normal(home button doesn't work) question. Listen...
Customer brought this iPhone 3GS in to replace the non-working home button. Before I did I tested it with a working screen assembly(obviously including a new home button) and it DIDN'T work. So I replaced the dock connector and speaker/mic assembly(where the home button makes it's connection. And that still doesn't work.
I have figured out now that the problem is NOT that the iPhone doesn't recognize the push of the home button but instead it thinks that the home button is always being pushed. When hold the power button(only) the iPhone will restart(which requires home+power).
Since I've tried replacing the home button and the dock connector is this problem with the logic board?
Any help greatly appreciated.
Message was edited by: iFixItMan

HI iFixItMan,
I have the same problem andmine was stuck in a recovery loop and it took me about 7 hours to get workingsoftware, now I have the phone fully working the home button has no functionwhen in phone mode, I have soft reset when in phone mode and the home buttonworks (resets phone) - Power + Home button pressed together)).
The home button also works whenthe screen is lifted from the connector for DFU mode and soft reset; I’mthinking there are two connections made to the logic board one for system(software reset and DFU) and one for phone connection.
Not changed the dock or thescreen assembly due to thinking which part I need to buy :/, don't want to keep buying parts then having to keep them if they don't work
Thanks again

Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

I've been struggling with a similar issue myself and just figured it out. Some of my content had been purchased with an older Apple ID that I don't use any more. When I authorized my second computer, I only authorized it for my new Apple ID, not my old one. When I tried to copy my library to the new computer, many songs, apps, etc. reported the error "could not be copied because this computer is not authorized". It drove me crazy because I knew the computer was authorized and much of my library came over just fine.
Finally I selected some of the problem items, selected "Get Info" from the menus, and saw that they were all purchased by my old Apple ID. I then authorized my old Apple ID on my new computer, and all of my files are copying correctly now.
Would be great if the message said something like "...because this computer is not authorized for Apple ID [email protected]"

Home Hub 3.0 vs Home Hub 2.0 packet loss

Similar Messages

Maybe you are looking for