Home Made Dock Station with HUB OTG mode and Charging !

Hi,
I just want to share my hard work with you guys !
New Video
Old Video
Some Pictures
All information how it's work etc you can find on my website
https://sites.google.com/site/sonicboomworld/
Regards and Enjoy !

Awesome work!
 - Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • IPhone Docking Station with USB Sync port AND Clock/Radio/Hi-Fi Function?

    Anyone know of any?
    Had a quick google, just got shown loads of cradles.
    Anyone seen any with all or most of the features I listed in the subject field?
    (Main ones being USB Sync & play music through)
    So that I can keep my phone in the one place and sync it from there.
    (Obviously I know you can't sync and play music at the same time)
    Or anyone know of any other similar solutions?

    Airport Express USB port does not support data - only printers. You need the Airport Extreme if you want to share a hard drive.
    I'd be interested to know if you can achieve your goal with one AE, although I'm starting to suspect that you need two AEs or you need to connect your original non-apple router to the AE via an ethernet cable. Hopefully someone will prove me wrong.

  • Problem using docking station with ipod 5th generation

    just bought an ipod touch, 5th generation, with the Lightening connector. Bought an Acoustic solutions docking station with the same small lightening connector but when I dock I can only charge the ipod and not play music through the docking station. Does anyone have same problems playing music with a 5th generation ipod that has the new small lightening connector?...I bumped into someone at Argos who said they are having the same problem not being able to play music from the new iphone 5 that has the lightening connector and even if you use a adaptor to make it 30 pin connector compatable it still doesnt work, any help will be appreciated, thanks

    Does Acoustic Solutions say it will work with your model iPod and iOS 7.0.4?
    Have you went to their support site?
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    Sometimes an iOS updates breaks compatibility and yo will have to wait for iOS update or an update to the dock's firmware.

  • Thunderbolt Docking Station with 2 Ports...

    I'm new to the forums. Please forgive my noob status. I have a Belkin Thunderbolt docking station with 2 Thunderbolt ports (as well as a number of other useful connecting ports). My MacBook Pro has 2 of them also. If I connect my MacBook with TWO cables, one in each port, will this double (or at least increase) the transfer speed to and from my laptop, over and above the use of 1 TB Cable?
    Thanks!
    docrocker1

    That dock is designed for one TB input from your Mac.  The other ports on the dock are for additional TB devices to be connected.  They are not made for parallel inputs.

  • Where can I buy this Toshiba Notebook Docking Station/USB hub?

    Where can I buy this Product in Denmark or in a webshop in Denmark/Europa ?
    *Toshiba Notebook Docking Station/USB hub*
    Product link: http://www.ubergizmo.com/15/archives/2006/07/toshiba_notebook_docking_stationusb_hub.html
    THANKS.
    Danish:
    Hvor kan jeg købe ovenstående USB Docking med 5.1 Dolby Digital ? Webshop i Danmark/Europa ?
    Tak

    You will find this Option on ebay or on many other Webshops in the Internet. Just search for the Toshiba partnumber PA3390E or PA3390E-1MPM with google or on ebay.
    I hope this will help you.
    cu

  • I have a music docking station with an 8 pin connector.  My i-pod has a 30 pin connector.  Is there an adaptor?

    I have a music docking station with an 8 pin connection.  My i-pod has a 30 pin connection.  Is there an adaptor available?

    No. There are only Lightning to 30-pin adopters

  • Laptops in docking station with lid closed go to sleep during in-place migration from XP to Windows 7

    We have an issue where existing XP laptops are targeted with SCCM 2012 OSD TS for upgrade to Windows 7.  The laptops are in a docking station, with the lid closed.  The laptops are going to sleep when the OSD is booted in WinPE, just before the
    Setup Windows and Configmgr step.  I have copied powercfg.exe from a Windows 8.1 machine (both AMD64 and x86 versions) to the MDT Tool package...." and then a step to run:
    %DeployRoot%\Scripts\%PROCESSOR_ARCHITECTURE%\PowerCfg.exe -setacvalueindex 381b4222-f694-41f0-9685-ff5bb260df2e 4f971e89-eebd-4455-a8de-9e59040e7347 5ca83367-6e45-459f-a27b-476b1d01c936 0
    However, the laptops are still sleeping during the Setup Windows and Configmgr step.   Any insight to correcting this will be extremely helpful.

    Hi
    We came across this issue, seems odd that SCCM doesn't suspend the power management in the OS during the TS - (But then again it also seems odd that Windows 7 will go to sleep if you close the lid of a laptop half way through a shutdown, so that when you
    lift the lid it wakes only to complete the shutdown, did MS not spot that, or choose to ignore it!?).
    These commands should be run soon after the Setup Windows and ConfigMgr step and will disable the device and screen from sleep/hibernating:
    Prevent sleep during OSD (Battery power)
    cmd.exe /c powercfg -x -standby-timeout-dc 0
    Prevent sleep during OSD (AC power)
    cmd.exe /c powercfg -x -standby-timeout-ac 0
    Prevent monitor off during OSD (Battery power)
    cmd.exe /c powercfg -x -monitor-timeout-dc 0
    Prevent monitor off during OSD (AC power)
    cmd.exe /c powercfg -x -monitor-timeout-ac 0
    Prevent hibernate during OSD (Battery power)
    cmd.exe /c powercfg -x -hibernate-timeout-dc 0
    Prevent hibernate during OSD (AC power)
    cmd.exe /c powercfg -x -hibernate-timeout-ac 0
    At the end of the TS, you can revert these changes by running the following command to reset the power scheme:
    powercfg -restoredefaultschemes
    Hope this helps
    Thank you.  However, we did put similar steps in our Task Sequence right after the "Setup Windows and..." step, but the issue we are having is that the "Sleep" occurs during the "Setup Windows and...." so it never reaches
    anything after that step until the lid is opened.

  • Can I connect my iPhone 3GS to a docking station with a lightening connection

    I have a docking station with a lightening connection, can I attach my iPhone 3GS to it?

    No.

  • Usb expansion dock station with arch

    Hi guys,
    I'm the owner of a dell xps m1330 and i was wondering to buy the kingston exapsion dock station with the video out. It is connected to the laptop using a usb cable.
    I know it works with winzozz obviously, but i don't know anything about its support with linux.
    Is there any problem to transmit video out through usb to the dock and then to the external video lcd?
    thanks in advance

    What kind of video card do you have?
    Just from my Dell XPS m1530, I have a nvidia card and within "System >> Preferences >> NVIDIA Server Settings", I am able to plug in a VGA cable on the side and have it recognize it almost instantly. I know tried it on a projector but still, it that worked, I would say you should be ok with the monitor part.

  • I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning)

    I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning). I would be glad to get your help.

    If you get the 30 pin dock get an Apple genuine adapter the rip-offs often do not work correctly
    If you buy a lightning dock a company called Sandberg makes the reverse adapter ,I have one and it works correctly
    As tonefox said i got the sandberg from Amazon

  • I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

    I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

    Applications should not disappear all by themselves.
    If they are then that coud indicate serious problems with your hard drive.
    Backup everything up as quickly as possible.
    Using Disk Utility verify your system disk.
    Allan

  • My ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. Help?

    my ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. I'm not sure what generation it is, its an 80GB. Help?

    The battery is possibly unable to take as much power as a normal battery. It may need a replacement battery.

  • Trouble using Airport Express Base Station with DSL modem, Router and Hub

    About 18 months ago, I had an Airport (802.11b) with WAN & LAN ports and modem hooked up to support two laptops, a Titanium Powerbook G4/600 and G3/400. The setup went from DSL modem -> Linksys router -> to Airport -> Hub (which had desktop and ethernet laser printer plugged in). The network worked fine.
    Then, I got a G4 iBook to replace G3/400. Wanted to get 802.11g to support “g” Airport card in iBook. Got a Linksys 802.11g Wi-Fi with 4-port router for $50. Hooked it up directly with DSL modem. (Couldn’t get it to send out to hub). Hooked the desktop and ethernet laser printer into Linksys Wi-Fi/router. The only way I could use the printer was by having it be a shared printer from the desktop. This was often problematic.
    Two months ago, I got a refurbished Airport Extreme Base Station. I can’t get the AEBS to interface directly with the DSL modem, so I hooked it up as follows:
    DSL modem -> Linksys router -> to AEBS -> Hub. I plugged my Epson 820 (USB) into the AEBS and can see it to print to.
    I have a static IP. That info is entered into Linksys router. Router set as Gateway, with DHCP enabled. AEBS is set to Connect using Ethernet, Configure using DHCP. Network setting: Distribute IP Addresses is unchecked.
    Here’s my issue:
    I can’t see the ethernet laser printer. It will occasionally flash available, but is gone in less than a minute. The printer is HP 2100 series.
    Sometimes I can connect to the desktop G4 tower; most times I can’t.
    I have checked and double-checked the cables.
    Both the printer and desktop are connected to the Hub.
    What can I do so that I can see the HP 2100 series printer and the G4 tower?

    Don,
    Thanks for the suggestions. Glutton for punishment that I am, I tried this again, “just for grins.“ The six other times I tried this, I couldn’t get the AEBS to “see” the Internet. And lo, this time it worked. Here’s the setup now:
    DSL modem -> AEBS -> 4-port hub (which is connected to G4 tower and HP 2100 Ethernet printer). My USB Epson is connected to the AEBS, and I can print from the laptops. AEBS is set up: manual IP info, Network: distribute IP address; share a single IP using DHCP.
    When I still couldn’t see the desktop G4 and the Ethernet HP 2100 connected via the hub (not), I got a flash. I had swapped out the cable a number of times to no avail. Then I realized, the hub is old and all the cables I was using are the new CAT5s. I dug out an old four-wire with RJ45 connectors that my husband made years ago (probably a cross-over cable). It was quite an effort as the cable is 30 ft. long and wrapped around the perimeter of the office behind desks and file cabinets, entwined with all the other wires. But I plugged it in and, Shazam! I am WORKING!
    And, Don, thanks to you, I have eliminated the router from my gaggle of electronic boxes.

  • Can i use iphone 4 docking station with iphone 4s?

    Please tell me if I purchase any of the docking stations, docking/alarm clocks, speakers, etc for my new iphone 4s..
    if the box says they work, or are compatible with iphone 4 -  (not 4s)
    are they compatible???

    Yes, they will work. The two phones have the exact same design (outside of internals)

  • Reconnecting to dock station with new T530 creates random colored pixels.

    Anyone with a T530 that uses the OFFICIAL and real dockstation have issues with random green and pink pixels on their external monitors when they reattach?.
    My T530 has the Nvidia optimus 5400 and the HD4000 Intel chipset which apparnently go back and forth between eachother using the BIOS to save power. I was getting REALLY pissed of with the the Intel HD4000 constantly adjusting the brigthness on my screen so I disabled it and went to discrete Nvidia graphics instead and to hell with the power savings.
    Anyone else seen issues with video anamolies with the docktation? If I disconnect the DVI cable and reconnect, it goes away. Do I have a bad dock or laptop?

    I experience this as well with my T510 on two different docking stations.
    I've simply put up with it for for a few years. Tweaking some display settings helped slightly mitigate the issue.
    However, my new dock is a Mini Dock Plus, with dual outputs, which allows me some additional testing possibilities. I've been able to confirm that it is a specific cable/display that is causing the issue, not a specific port on the laptop. Furthermore, dropping the resolution from 1920x1080 to 1680x1050 caused the dots to dissapear completely.
    The odd part is that I can't seem to reproduce the issue with another device connected to the same cable/display.
    My remaining troubleshooting steps are:
    * swap out the cable with an alternate (my alternate DVI cable has ferrite cores on each end).
    * If this resolves the issue, I'll add my KVM back in the mix, but not use the apparently bad KVM DVI cables. If it doesn't, then I might have to ditch the KVM, and use input switching on my monitor :/
    My specs (but to be honest, my googling has turned up similar issues with older thinkpads and ATI graphics, so I don't think it is exactly dependant on the laptop):
    * T510
    * Nvidia NVS 3100M (with 'nvidia' driver).
    * Mini Dock & Mini Dock Plus w/ USB3.0
    * Fedora 19

Maybe you are looking for

  • Why i can't get latest firmware update for n97?

    I can see there is new update for n97 (21.2.045) but update check from phone and pc says i have the latest version. i don;t have latest version. i have september firmware on.

  • Include A Field in ALV which is not in data dictonary.

    Hi all,   Im doing ALV report.      in that i need to calculate the gross price.        so i've to take difference of two fields & store it in a variable.now i want to know how i should display this field in alv. Example: v_gprice = i_tab-netwr - i_t

  • Background colors for tables

    Am using CS5 and would like to have "just" the interior of the table to have a specific background color.  Currently - using the code below - I receive the following result with white appearing outside the table perimeter.  Would also like to be able

  • HT4101 lightning sd camera reader

    Ipad Air,ive recently bought the lightning to SD Card Camera reader. put in my sd card and then the lightning reader into the ipad air, and it fails to reconise the reader saying there are no photos to upload, any ideas

  • How to create an instance of List T ??

    i want to make a class Box<T> that may contain inner box (same type)inside it. public class Box<T> {    private List<Box<T>> innerBox;    public <T> Box() {       innerBox = new ArrayList<Box<T>>(); // compile error compiler message: found: java.util