Home resides on a windows cluster, OS X doesnt see it
I am having a issue where even though the users active directory profile has the pathing for the home folder, the users home folder does not mount.
Could this be because the home resides on a cluster?
Solved the issue, the AD guy didnt put in the right pathing. Fixing that and it sees my my documents folder and homesync now works.
Similar Messages
-
Java stack on working on node 1 of windows cluster
Hi All,
I am trying to install SAP ECC 6 in the Windows cluster ,
already installed CI , ABAP+java in node 1and running sucessfully, after making creating group in oracle fail safe server and performing steps of cluster installation .
Now when i am trying to start the SAP in node 1 , ABAP Work process is working fine , but not showing anything in java work process , provide details for dev_disp , i am not able to paste all the dev_disp file
please help
kshetij
trc file: "dev_disp", trc level: 1, release: "700"
sysno 02
sid PRD
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3316
Tue Oct 13 16:37:35 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 3316) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Oct 13 16:37:39 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >bnsrisap01_PRD_02 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE77DD0
DpShMCreate: allocated tm_adm at 000000000EE77E30
DpShMCreate: allocated wp_ca_adm at 000000000F3DBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3E1A90
DpShMCreate: allocated comm_adm at 000000000F3E39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46A660
DpShMCreate: allocated gw_adm at 000000000F46A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46A710
DpShMCreate: allocated wall_adm at 000000000F46A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 13 16:37:40 2009
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16384MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 5016
argv[0] = D:\usr\sap\PRD\DVEBMGS02\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PRD\DVEBMGS02\exe\jcontrol.EXE
argv[2] = pf=
sapcluster\sapmnt\PRD\SYS\profile\PRD_DVEBMGS02_bnsrisap01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=02
argv[6] = -DSAPSYSTEMNAME=PRD
argv[7] = -DSAPMYNAME=bnsrisap01_PRD_02
argv[8] = -DSAPPROFILE=
sapcluster\sapmnt\PRD\SYS\profile\PRD_DVEBMGS02_bnsrisap01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( sapcluster) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >bnsrisap01_PRD_02 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
Tue Oct 13 16:37:42 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Tue Oct 13 16:37:44 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 232
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1705) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5016)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue Oct 13 16:38:20 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2292
argv[0] = D:\usr\sap\PRD\DVEBMGS02\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PRD\DVEBMGS02\exe\jcontrol.EXE
argv[2] = pf=
sapcluster\sapmnt\PRD\SYS\profile\PRD_DVEBMGS02_bnsrisap01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64998
argv[5] = -DSAPSYSTEM=02
argv[6] = -DSAPSYSTEMNAME=PRD
argv[7] = -DSAPMYNAME=bnsrisap01_PRD_02
argv[8] = -DSAPPROFILE=
sapcluster\sapmnt\PRD\SYS\profile\PRD_DVEBMGS02_bnsrisap01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Tue Oct 13 16:38:23 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 188
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1813) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2292)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWNHello Kshetij,
Check this sap note 723909 and adjust the memory parameters of JVM.
Also ,check if central services are running ,SCS and message server entry is there in etc/services file ,it will be like sapmsSID
Regards
Ajay -
We have a MSSQL 2008R2 Enterprise edition with a two node active passive fail-over cluster running on 2008R2 windows cluster with out any issues,
Now my question is can we add one more MSSSQL cluster instance for the same setup with out disturbing the existing one ?
Also give thoughts on load sharing as the second node is mostly ideal now except fail-over scenarios,
Why we go for this situation is because of the collation setting which can be set only one per instance(Database collation setting change not working), we need a different default collation for the new setuphi,
>>Now my question is can we add one more MSSSQL cluster instance for the same setup with out disturbing the existing one ?
Yes it is possible .You need to add new drives as cluster aware and install SQL server and put data and log files on thse drives.YOu would need to create named instance of SQL server and need to create different resource group.Both old installation and new
onw would work separately.
>>Also give thoughts on load sharing as the second node is mostly ideal now except fail-over scenarios,
Good point indeed.You are about to create Multi instance cluster and should plan for scenario where one node is down and other node is handling load for both instances.Memory and CPU should be enough to handle the load.
>>Why we go for this situation is because of the collation setting which can be set only one per instance(Database collation setting change not working), we need a different default collation for the new setup .
Just for collation if you are installing new instance seems little wierd to me.You can manage collation at column ,database and at server level.
http://technet.microsoft.com/en-us/library/aa174903(v=sql.80).aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
Can anyone assist me with this issue?
ThanksTo downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again. -
How do I hook up a G3 iBook to my home network with only Windows machines?
I'm completely ignorant of Apple technology but pretty good for a novice with Windows PC's. To help a family member with an iBook (Mac OS 10.3.9) back up a gazillion family photos (at least 3.2GB in the iPhoto Library), we want to connect his iBook to my home network with two Windows machines (one of which is connected via UBS to an external drive for backup). But before I just connect his iBook to an Ethernet port on my Westell modem+router, what should I know?
I need to know all the basics and all the steps, in as detailed a manner as you can stand to tell me.
And when it all looks good, what are the steps to copy the iPhoto Library to a designated spot on one of the Windows machines (or that external hard drive)?
By the way, this is the iBook:
Machine Model: iBook
CPU Type: PowerPC 750 (2.3)
Number Of CPUs: 1
CPU Speed: 800 MHz
L2 Cache (per CPU): 512 KB
Memory: 640 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.6.4f1
System Version: Mac OS X 10.3.9 (7W98)
Kernel Version: Darwin 7.9.0
Many thanks!Hello,
When I got my first mac this ( http://macs.about.com/cs/tipstutorials/a/xposxsharing.htm ) article helped me enormously.
It's very easy to write to the disc once you've set up the network.
On the mac locate the iPhoto library (normally open finder and click on pictures).
Open another finder window and locate the windows PC on your network, then mount the folder to which you will back up the iPhoto library.
Drag the iPhoto library to this folder.
Wait.
Wait some more.
When the copy is complete check the images can be accessed from the PC.
Unmount the folder from the mac by dragging it to the trash.
Congratulations.
Beware though, if you're like me you'll find this apple thing adicitve!!! -
My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on. I have the little arrow that normally selects my AppleTV in iTunes but AppleTV is no longer listed (only My Computer). Is there an issue with the latest update. This is probably my fault by telling everyone how good AppleTV is and that it just works! Doesn't work any more :-( I have tried all the usual restarting of AppleTV and PCs. I'm having to revert back to the Samsung Blu-ray player's PC sharing :-(
Restarted router(s) and it works again.
-
How to manage windows cluster on windows server 2008 R2
Hi I want to know how to properly shutdown or stop windows cluster with out failover or failing it.
I have successfully created windows cluster on win 2008 R2 sp1 using vmware with starwind software for SAN storage.
Now when I shut down or stop cluster service on node1 it failsover and shows critical errors fine.ok... I tried to destroy and clean up cluster using cmd commands.Forcecleanup both nodes with cmd commands.it was successful.
Later I recreated san storage with target and initiator configuration using starwind without any issue.
I Reinstalled FC service on both the nodes restarted vmnodes.I cheked all the firewall were disable.and machines able to ping well..
Now when I tried to recreate new cluster it fails and gives different errors.AS Node1 was evicted from cluster,Another was Quoram was lost as no witness disk was found.
Also It did not show my cluster under FCM on Node2.I tried to add node Node2 but error saying Node2 is already in a cluster.
So I want to know how to manage windows cluster properly and manage it entries in active directory so that even after shutting/stopping the service/destroying cluster I do not need to do all over again.
I had to recreate all VMware from start and do AD setup and SAN storage again then only windows cluster got successfully created once again....................
I had to recreate all vmware nodes with FC sevice reinstalled and also recreate AD DS and DNS.
srm_2010Hi srm_2010,
You can refer the following KB:
Start or Stop the Cluster Service on a Cluster Node
http://technet.microsoft.com/en-us/library/cc771742.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I cannot get Home Sharing to work, Windows 7, 3rd Gen iPad
Sorry for the cross-post -- I originallly put this in the iPad discussion group, but this is clearly the group where it belongs...
Anyway, I've followed the instructions to the letter, enabling Home Sharing on my Windows 7 PC running iTunes 10.7.0.21, and also enabling it on my 3rd Gen iPad. I've verified that it's enabled about a dozen times now, rebooted everything, and still I can't see my iTunes Library from my iPad... I go to Music on the iPad, and it just shows the few songs that I've loaded onto the iPad itself, not my PC's music library...
Another thing -- if I try to use the Remote app to control my PC's iTunes remotely, I click on Settings in that app and click on Add iTunes Library and it gives me a 4-digit code and tells me to go to my PC and click on "My iPad" in iTunes then enter the 4-digit code. "My iPad" *does* appear in my PC's iTunes, so clearly it's seeing the iPad's request for access... But when I click on it and enter the 4-digit code, iTunes just sits there on "verifying remote passcode" forever (or at least as long as it took me to go outside and smoke a cigarette -- I imagine it's supposed to do it in about 3 to 5 seconds, not 10 minutes)...
I've opened up TCP port 3689 and UDP port 5353 on my Windows Firewall, and still no change... Of course I leave iTunes running on the PC while I'm trying all this stuff... From what I've read, they're telling me that in iTunes there should be a "Look for Remotes" check-box when I go to Edit | Preferences | Devices, yet I don't see one there so I can't check it -- but I don't think that's the problem because iTunes on the PC is seeing my iPad, it just won't talk *back* to the iPad when I enter in the 4-digit remote code... At this point I have no clue what's going on.
Does anyone have any ideas as to how I get this thing working?
Thanks,
L.Well, I guess the 3rd time's the charm... Instead of rebooting everything, I shut everything off, waited a full 2 minutes and turned it back on in the following order: Router, PC, iPad. Waited a good 3 minutes between turning each device on. (Oh, and before I shut down the PC, I added iTunes to the Startup menu so it would start when Windows booted).
Now it seems to be working fine -- my library showed up in the Remote app on the iPad automatically, no need to enter a 4-digit code on the computer (makes me wonder why it didn't do that the first time?)
Anyway, it's all working now... No idea why... But it works...
Thanks,
L. -
Installation of SAPCCM4X-Agent on Windows Cluster
Hi!
I woulld like to install SAPCCM4X-Agent on Windows Cluster.
Does anyone know the procedure here (e.g. install the agent twice on both nodes, etc.)...
Thank you very much!
regards
ThomHello Thom,
Here is a note that will help you out.
SAP Note 536954 - OS data in a cluster environment for OS07
As per the note
The CCMS agent must be located on a shared disk, so that the cluster administrator software can start the service later.
Regards,
Siddhesh
Edited by: Siddhesh Ghag on May 27, 2008 11:02 AM -
Creating a windows cluster 2012 for sql server 2012 clustered installation
Hello,
I am trying to create a windows cluster for sql server 2012 clustering on windows server 2012 R2 standard edition-64bit OS
when i perform the test after adding the cluster nodes i get this warning on networking.:Validate the servers can communicate
do i have to enable UDP port 1434?
I enabled ports 3343 on both the server but i still get the error.Please see the image below .Please suggest.
Thank you.
luckyDo you have installed one SQL Server instance on the node?
http://blogs.technet.com/b/meamcs/archive/2013/02/15/sql-2012-failover-cluster-build-step-by-step-part-1-installing-sql-2012.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Clone R12.1.3 in Windows Cluster environment
Hi Oracle gurus,
I’m currently “fighting” with cloning the already fresh installed R12.1.3 instance on Windows Cluster architecture:
Source system:
Fresh install EBS 12.1.3 on 1 physical server:
- Windows 2008 R2;
- Application on drive D;
- DB 11.2.0.2 on drive E;
Target system (single instance):
- MS Windows failover Cluster – 2 physical servers with shared SAN drives D: and E:
o oracleHQ1 – active;
o oracleHQ2 – passive;
o OracleERP – virtual cluster hostname;
- Windows 2008 R2 on both server’s C: drive;
- ApplicationTier on shared D: ;
- DB on shared E: ;
- Oracle FailSafe on both server’s C: ;
- DB (DB and DB Listener) and Apps (APPS_listener, ConcManager and OPMN) services are running on oracleHQ1 when active; same services started on oracleHQ2 in case of oracleHQ1 (hardware) fail.
- EndUsers logging through one url: http:\\oracleerp.domain.com:8000 to the active server;
- (My customer will prevent hardware failover through this solution.)
What are the steps to clone the source instance to the target, in order to have active/passive failover solution? I prefer to spare the steps, I’ve already done so far, to avoid misleading.
Please advise/guide, as I’m in a stuck for 2 weeks.
Thanks in advance.Hi,
here are the details:
First try:
All the preclone steps are done as per DocID 406982.1
On the target (logged onto oracleHQ1):
- Successfully cloned and configured the DB with hostname OracleERP (virtual cluster hostname);
- Successful appsTier adcfgclone.pl and AutoConfig with hostname OracleERP (virtual cluster hostname);
- All the DB and apps services (named with “*OracleERP*”) are starting on oracleHQ1, except the Concurent Manager (fails 30sec. after start);
- Not tried to clone on oracleHQ2 with with hostname OracleERP;
Second try:
On the target (logged onto oracleHQ1):
- Successfully cloned and configured the DB with hostname OracleERP (virtual cluster hostname);
- Successful appsTier adcfgclone.pl and AutoConfig with hostname oracleHQ1 (virtual cluster hostname);
- All the DB (named with “*OracleERP*”) and apps services (named with “*oracleHQ1*”) are starting on oracleHQ1;
- The instance is working fine, but unable to clone the same services on oracleHQ2;
My question is:
Should I clone the DB and the Apps firstly with hostname oracleHQ1 (logged through oracleHQ1), or I should clone it with hostname OracleERP (virtual cluster hostname)? And how are the same services created and configured on the second server oracleHQ2 (should the services have the identical names), in case of failover.
Thank you
Krasen -
Best Way to Migrate Home Folders from Dell Windows 2003 to XServe 10.6
We are migrating Directory services and File service from a Windows Server to an Xserve running 10.6. What is the best way to copy over all of the data including everyone's home folders from the Windows server to our new Xserve while preserving the file attributes?
Any advice greatly appreciated. Thanks in advance.
TimHi Jay,
good news for you - since Oracle 11g it is allowed to have a physical standby between Windows and Linux. So the absolutely easiest way would be to build up a standby on your new Linux server, do a switchover with one minute downtime at a maximum ... and that's it.
You may check ML Note:413484.1 for certification (the table shows which OS mix is allowed).
The process will be the following:
1) Let RMAN build up your standby automatically through the network while your PROD is still running
2) Once RMAN has done this job you'll do a simple switchover
If a standby solution is not an option for you, then you could use Data Pump on a NETWORK_LINK.
This means: You build up a new and empty database on your RHEL server - you create a database link between those two databases.
Then you run a full import without creating a dump file through the db-link:
IMPDP usr1/password NETWORK_LINK=db_link1 FULL=Y
You may check out Note:553337.1 for more info on Data Pump.
Transportable Tablespaces or Transportable Database with RMAN would also be an option but those require some additional prep work.
Kind regards
Mike -
Oracle on windows cluster, with failsafe installed. Can it be switched live
Hi all
We have a oracle database, 10.2.0.4, installed on a 2 node Windows cluster (2003 R2 64 bit). Only one node is the active node. On top of this Failsafe is installed.
Oracle is used for SAP.
Normally when I need to switch the Oracle database from node1 to node2 I follow this procedure:
1 bring down SAP
2 set the database offline
3 switch the Oracle database using failsafe
4 set the database online
5 start sap
Being a hospital we just want to have SAP up all the time, this procedure only takes 20 min but I wondered if the switch could be done live
So just go into the failsafe manager and switch, (won't do it in prime time of course)
Can this live switch result in a corrupt database?
Thanks for replyingHi,
to do it really life you need another technology than a "failover cluster". You can use RAC for this.
A failover cluster itself needs to be sure that the stack is down, before bringing it up on the other side. If not this can leed to corruptions... (though Oracle will try to prevent them in most cases)...
Regards
Sebastian -
Hi
We are having a windows cluster environment? I want to add Oracle to this environment. There are a few issues
1) Could we add Oracle standard edition to windows cluster?
Please provide me some document depicting the process to do so.
ThanksFail Safe .... I understand that only one node will be active at any time. When one fails, second node is up and the traffic is routed to the second one.
HTH
Regards,
Badri. -
Windows Cluster Management Library did not pass the security verification
so, nothing to add
Windows Cluster Management Library did not pass the security verification.
The management pack cannot be downloaded and the temporary file has been deleted.
Could not load management pack [ID=Microsoft.Windows.Cluster.Management.Library, Keytoken=31bf3856ad364e35, Version=7.1.10100.0].
Current versions:
SCOM 2012R2 update rollup 4
Windows Cluster Library 7.0.8433.0
Windows Cluster Management Library 6.0.7063.0
Windows Cluster Management Monitoring 6.0.7063.0
any solution to fix?
noneIgor,
take it from there:
http://www.microsoft.com/en-us/download/details.aspx?id=2268
I assume you tried to get (download/import) it directly through the console, right? That's not recommended since you most of the times don't get the guides (download) or can review the MP (import).
A better source for downloading (and to subscribe for mail notifications) would be:
http://social.technet.microsoft.com/wiki/contents/articles/16174.microsoft-management-packs.aspx
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com
Maybe you are looking for
-
Pages 5.2.2 difficulty creating different headers (as in APA format)
What is a simple way to have a different header on p. 1? APA format requires it. I try and try... I create different sections to achieve this... when I do, the page number starts over at 1. I think I got it before, but I can never remember all the st
-
I'm new to this and I think I typed a long heading! Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not app
-
Never met problem with connector
Hi, I have the source and target on the same oracle instance but in different schema. Owb automatically creates the connector but when I try to validate it, I found this warning: VLD-3064: Owning and referenced locations of this connector are on the
-
Binding a Shared Varable to multiple MODBUS registers
A simple question, but can't seem to find an answer: I have a project library with a serial MODBUS i/o server setup. In this library I have several shared variables that are bound to registers on the remote device through the MODBUS protocol, and thi
-
OS 9.1 RGB monitor issue
i updated my older Mac 7200 to OS9.1 from OS8.6 and discovered that my SONY RGB 15" monitor would no longer respond. i have an older Apple 14" display that starts just fine. the SONY used to work with 8.6. i don't know what happened. if i start up in