Home sharing not working on windows pc. Any help would be great!

I have recently obtained an Apple TV however I am currently unable to access my music on itunes via home sharing from my windows 7 pc. I have the latest version of iTunes, having updated it a few days ago, and have made sure that all of the apple accounts, networks etc that they are linked to are the same on all my devices but it still will not connect! As far as I am aware, it has nothing to do with my internet connection as we only have one router and my apple tv and ipad have no trouble connecting. Any help with this would be greatly appreciated!

I was having the problem where the library would start loading and stopped on half circle. I did research and followed several threads on how to solve the problem until I came across one that solved it.
The problem was actually that I was being very impatient. Please just wait for it to load. It can take a while specially if the content you are trying to share is large. Mine was loading correctly but the auto lock feature that you can find under "Settings" and "General" was active and it was preventing the library from finishing to load. If the phone or Ipod auto locks it will interfere with the correct loading of the Library. The solution that worked for me is: Activate Home Sharing on Itunes, Activate Home Sharing on your Iphone/Ipod and then go to the music or video app and tap "More" then "sahred" and then your Library. Do not leave this screen or do not let your device to auto lock. Just wait with patience and your Library will be there soon or late.

Similar Messages

  • ITunes Home Sharing not working in Windows 8 with Apple TV

    My Home Sharing does not work on Apple TV 2 - I am running the latest version of itunes, apple tv software, all windows updates installed, all firewall ports required are open, anti-virus is allowing things through, I have reset and restarted my apple tv, pc and routers, unticked IPv6 - still nothing - please help!

    Problem solved, however not the way I would have preferred...
    Turns out that I needed to disconnect the hardwired ethernet connection between my router and the Apple TV.
    I my setup consisted of a traditional hardwired Linksys router, and a matching Linksys access point.
    Both my computers were on the wireless network setup by the access point, and were able to communicate between each other just fine.
    However, for whatever reason neither one would communicate with the AppleTV while it was hardwired to the router. Once I unplugged it, and assigned it to the same wireless network as the computers were on, it was able to see both computers without any problems...
    Not too upset, seeing as how the AppleTV is only about a foot from the access point and router - so there are no signal strength issues. However, I would have preferred to keep the AppleTV on the hardwired connection...
    Hope this comes in handy for anyone else with this problem...

  • Why does home-sharing not work with Windows-PC and iMac?

    Aber mit gleichem Windows-PC und MacBookPro doch? Alles im selben Neztwerk. Der PC erscheint beim iMac einfach nicht unter Freigaben. Der iMac erscheint zwar beim PC unter Freigaben, aber wenn man auf die Mediathek des iMac in der PC-Anzeige klickt, erscheint der bunte Drehball und nach einer Weile ist die Anzeige des iMac in der Rubrik Freigabe beim PC nicht mehr da. Erst nach Neustart des PC erscheint der iMac dort wieder. So nutzt mir das gar nichts. Die Einkäufe werden automatisch auf allen drei Geräten aktualisiert.
    Sämtliche "Hilfen" habe ich durchsucht, aber ohne Erfolg. Es klappt einfach nicht mit der Freigabe.
    Vielleicht ist es ja möglich, eine deutsche Antwort zu bekommen.
    Ich kann mir auch gut vorstellen, dass ein solches Forum in Deutschland gut genutzt würde. Es ist sehr schade, dass es das nicht gibt. Aber vielleicht kommt soetwas ja irgenwann einmal. Jetzt wo auch in Deutschland an jeder Ecke Apple-Produkte zu kaufen sind und keine Exoten mehr darstellen.
    Vielen Dank im voraus.

    First, each Library should have a unique name, not the same name.
    Now, I wrote an extensive how-to in another thread that explains Home Sharing, Library Sharing, how to turn them on and identify them and so on. See if it helps you with your problem.
    https://discussions.apple.com/thread/3461734

  • How do i fix my itune?it says,this copy of itunes is corrupted or is not installed correctly please reinstall itunes.i tryed to update to ios7 and this has happend.any help would be great

    I've got myself a new iphone 5s and I tried to update itunes. Now its telling me that this copy of itunes is corrupted or is not installed correctly Please reinstall itunes.I'm not good with computers so any help would be great.I'm scared if i reinstall i will lose everythig.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • When I use IWeb for my blog, many people claim they are unable to use the comment window, claiming they get an "error" message.  I have check "allow comments" on the appropriate page.  Any help would be great.

    When I use IWeb to post my blog, many readers claim they are unable to post a comment.  When they attempt, they receive an "error" message.  I have check and re-checked that "allow comments" is checked in the appropriate window.  Any help would be greatly appreciated.

    You can publish your blog on any server but will lose the commenting capability.  Since you'll have to find a new host soon anyway since MMe will go away on June 30, you might consider converting your blog to WordPress as that's the only  other blog type that an MMe blog can be converted to and keep it's comments, etc.  Rage Software has create an application that will convert an iWeb blog to WordPress: Convert Your iWeb Blog to a WordPress Blog | iWeb to WordPress. That way you can keep your blog's continuity.
    This may be of some additional help to you: Life After MobileMe.

  • I have an IMac.  I put a folder on the desk top and now want to delete it.  The folder seems to be locked.  I went to get info and tried to unlock it but still can't delete it.  The folder has nothing in it.  Any help would be great.  Thanks

    I have an IMac.   I put a folder on the desk top and now want to delete it.  The folder seems to be locked.  I went into Get Info and attemted to unlock the folder and delete it.  Won't go away.   There is nothing in the folder.   How do I unlock this folder and delete it?   When I try to delete it, I'm asked for my password which I put in and is accepted, but will not delete the folder.  Any help would be great.

    If you are sure there is nothing in it, download trashit, a useful free app.   That will dispose of it.
    Download Trash It! for Mac - Force-empty your trash can. MacUpdate.com

  • HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphone will download and my ipad but nothing from my computer. any help would be great.

    HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphod will not  download and my ipad  any help would be great.

    A lot of people are experiencing it, which suggests that Apple is having issues. If that is the case all people can do is wait it out.

  • ITunes 10.6.3 home sharing not working properly

    iTunes 10.6.3 home sharing not working properly.  I can access with my three ATV2's watch a movie later that same day it tries to access and ATV2 just keeps trying and never gets through to the library.  If I restart iTunes its fine then later can't access.  I am running iTunes 10.6.3 on a i7 Mac Mini with 10.7.4.  Sole job is to be iTunes server and an occasional HTPC with remote buddy running.  I disabled remote buddy ajax remote feature, and file sharing is on so I can load new tracks form other macs Thats it, a vanilla install with all updates.. No problem prior but not sure if problem free period was with 10.6 earler versions or 10.5 versions.  I update as warnings to do so come up.  The remote app has same problem accessing the Home Share.  I disabled home sharing on my iPhone and set to access the old method with 4 digit code and sees all the time and will play to my express base stations so seems to be home sharing issue because iPhone apps with home sharing on and ATV2s have issue accessing.
    I'm never home but when I am I use this equipment loads and this weekend not reliable at all.  I have firewall disabled, and setup is as before and is working fine.  I am using Mini by ethernet and using AEBS 1st generation gigabit as router only wired to cable modem and whole house ethernet attached, latest version AEBS gigabit as a wireless bridge and 2 prior version 11n expresses and a 11g express, all expresses are set to wireless off and are connected to ethernet and then to a stereo in 3 different rooms.
    I can't be only one.  Considering downgrading to last version of 10.5 but not sure how to do this.
    How many of you are having trouble?
    Any resolutions?
    How to report to Apple?
    How to downgrade safely? Or is it 10.7.4?

    I ran into the specific problem in another thread.  There are more than 100 connections from the apple TV's to iTunes.  You can do a netstat -a (windows or Mac), and verify the problem.  iTunes is smart enough to stop allowing more than 100 connections but stupid to allow the ATV to create so many connections.
    Now for what you really want!  Set all of your ATVs to wifi only.  Even setting the iTunes host to wifi might help also.  I think that wifi is more unreliable, and forces connections to drop, keeping the count under 100. 
    I also turned off ip v6.  That could help you also.  I originally had problems on a Mac mini, and built a windows 7 box to try to fix the problem.  The wifi trick worked on both platforms.  Several of us have bug reports into apple.  I have a wired house also, and am very angry to NEED to use slow wifi to overcome this problem.  The ATV gen 3 has been able to keep up with 1080p over wifi, so it doesn't hurt too much.  What really hurts is spending over 40 hours troubleshooting this bug.

  • Home shareing not working

    home sharing not working  in version 10.3.6

    Home sharing is only supported on version of iTunes that run on OS X 10.5 or later. You could go to the app store and purchase the Mountain Lion update for $19.99, then update iTunes and then it should be easy to set up.

  • Does Home Sharing not work through a network extender?

    Home sharing seems to cut out whenever I get into range of my network extender (Airport Express).
    Here's my setup, it's pretty standard: Cable modem wired to Airport Extreme router, which is connected wirelessly to the MBP with my iTunes hard drive. All of this is in my living room.
    I use the Airport Express to extend my network into the bedrooms.
    Whenever I'm home sharing from my iTunes library on my iPhone, if I walk to my bedroom, it cuts out. It usually crashes the iPod app. If it doesn't completely crash it, I can get it to restart buffering if I walk back to the living room.
    Does Home Sharing not work with wireless extenders? Do I have to change something in the set up?

    However, when a device goes from being attached to one wireless device to another, there is often an interruption as the device must change the radio connection to the network. There is a brief period of no connectivity (a second or two)
    Try starting the share while in your bedroom instead of the living room. I'll bet it works.
    Makes sense - so it's a bug in the iPhone OS, that it's unable to recover from temporary interruptions to wifi connection?
    However, I'm not so sure. Starting the share in the bedroom works as you suggest (since 4.3.2 - didn't under 4.3.1) - but as soon as you go back to the living room and the iPhone connects to a different base station the music stops playing. Note also that the shared library itself ceases to work. So for example you can't be in one room (on the extender) and add the shared library (without actually playing anything yet) then move to another room (on the base station) and play a track from the shared library. It just plays dead and you have to explicitly reload the shared library to get anything to play.
    So is it maybe a bug also with iTunes that it can't keep up with a shared library client moving from one wifi station to another?
    How do you report these things to the people that matter by the way?

  • I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

    I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

    Hi curtismoxam,
    Please try these troubleshooting steps: [[Fix problems connecting to websites after updating Firefox]]

  • I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    Activation issues are almost always the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.

  • My HP photo smart  C6280 printer does not work with CS6.  Any Help?

    My HP photo smart  C6280 printer does not work with CS6.  Any Help?

    How does it "not work"?
    What OS version are you using?

  • Safari will not launch- any help would be greatly appreciated

    This past week my safari began to fail to launch. It worked fine monday, on my friends home wireless. However when we booted it up Tuesday at our home-also wireless- it would not open. All other internet access works fine-ie ichat, itunes etc., but we can't get it to open with anything. When you click the icon it bounces as it were about to launch but never gets the black carrot under it. I opened the system activity monitor, and it also does not show it launching. I attempted to reinstall it using the number 2 setup disk, but that didn't seam to make a difference. It also will not launch if clicking on a saved html file nor on a hyperlink.... I tried moving the safari file folder and preferences file out of the library onto the desktop and restarting it(I had read that on a different post) but that had no effect...As I am used to working on a plain old IBM computer I'm not sure how else to trouble shoot the mac as its my girlfriends... any help would be greatly appreciated as we can't access the internet on hers to even download netscape or internet explorer

    Your steps so far are OK but you may want to try:
    1 Trash your user library Caches folder (House Icon with short name in Finder window (hard drive window)GOTO:House icon > Library folder > caches folder
    2 Trash the com.apple.Safari.plist file in User library > preferences folder > Safari.plist as well as removing the library Safari folder its self.
    3 you can selectivly re-install Safari 2.0 from your OS Tiger Install disk 1, (see Knowledge base article 301229 for how to just select the Safari Application) without doing a complete system Archive and Install.
    4. Create a new Test user account on the system and test how Safari responds in the Test user, see if its a user related issue and not system issue.
    5. Still no Safari response? have to do an Archive and install (not preserving user and network settings)article 107120
    PS. Issue may be related to actual internet connection connectivity, power cycle cable modem and router or airport if using one as well as the computer(keep unplugged for 3-5 min) and plug the cable modem in and then the router/airport then power on the computer. Do the Airport Admin utiliy (applications, utilities on HD_1)update.
    - do a hard reset of airport knowledge base article 108044(Express base) and 107451 (Extreme base)
    - Check with internet provider for connection issues "cannot find server" ect.

  • Help iMac w/Lion. Virus/malware Safari can't shutdown. Got pop up saying I won a prize. Did not select OK. Have to force shutdown. On restart of Safari get same pop up. Locks up Safari. Any help would be greatly appreciated.

    PiCked up a virus/malware please help me get rid of it. While browsing with Safari got pop up saying I won a prize. Click OK to find out what I won. Did not click Ok, but cannot close Safari without using forced shutdown. Powering down computer and restarting then selecting Safari brings up same prize window. Just installed Trend Microsoftware for Mac. It's scanning now. Don't think it will work.
    If I open another on same iMac everything seems ok.
    Any help would be greatly appreciated.
    Thanks

    I am also running Lion and had the same problem: a persistent popup on top of a half-opened Safari window saying that I had won a prize and should click OK to claim it.  If I forced Safari to quit, the same pages and popup menu would appear when I then reopened Safari.  From what I can tell, the problem results simply from the fact that Safari in Lion defaults to auto-reopening web pages that were open when Safari last quit, including those suspicious pages that may have prompted the user to force-quit Safari in the first place.  I solved the problem this way:
    (1)  After force-quitting Safari, I went to my user Library folder and found the Saved Application State folder within.  I then found the folder for Safari (com.apple.Safari.savedState), opened it and deleted its contents.  Now the next time I open Safari, there will be no pages to auto-reopen.
    (2)  Since this problem could happen again, I decided to disable the auto-reopen feature in Safari.  I did this by highlighting the "com.apple.Safari.savedState" file and choosing the File-->Get Info command, and then in the Get Info box, I turned on the Locked checkbox.  This prevents Safari from adding any files to this folder.
    This solution has worked well for me, and it has the advantage of not requiring the user to reset Safari.  It also preserves Lion's auto-reopen feature for all other applications.
    I need to give credit to David Pogue for the information I used to solve this problem.  He describes this procedure on page 169 of his book, Mac OSX Lion, the missing manual.
    Steve

Maybe you are looking for

  • Several cost centers in one sales order

    The situation is. Weu2019ve got the task to find solution how to create sales order document with several cost centers. Now we use order reason to assign cost center in sales order. We use only one order reason in one document and it means one cost c

  • Discoverer 3.1.36 vs. Discoverer 3.1.45

    Hi, I am told that we need to up-rev from our current version of Discoverer (3.1.36) to version 3.1.45 for support of Windows 2000. What changes have been made to Discoverer between version 3.1.36 and 3.1.45? Thanks, Suzanne null

  • Profitability report in COPA

    Hello all, Can any copa expert suggest me on the following problems. 1. There is a difference between FI sales value and COPA sales value, it has been reported that one document was not considered in COPA. what should I do to include this document. 2

  • Business connector help

    Guy's i am new to business connector and need some help file which are easy to understand ,pls forward such file to my mail-id [email protected] ,point's will be rewarded

  • Tune datapump performance

    hello * does anyone know how to speed up expdp process? I can see it mainly loads the undelying operating system (in my case there's I/O starvation - vmstat shows idle waits while CPU users/system/idle are very low. It's testbed only but I am concern