Hooking up a Cisco digital box to a standard Def. TV. How to

How to hookup a digital boc, Cisco 150N, to a standard def. TV

jjg111 wrote: How to hookup a digital boc, Cisco150N, to a standard def. TVIf the box doesn't have an RF out jack, use the Component or Composite video jacks along with left and right audio. If the TV doesn't have inputs for those, you'll need something that can convert the signals to channel 3 analog, like maybe an old VCR. Or change out the box for one that has an RF out connector. Or replace the TV.

Similar Messages

G4 titania PB hooking up to a digital projector

FIrst time to post,,,
I am supposed to give a slide show, so i thought Iphoto would be good as it is fairly simple,,, i took my PB to the bank that is allowing me use of there project,, i thnk a in focus l3 540? anyway, just testing it to see how the photos would look before hand,.
I connected the cord to the little monitor adapter that comes with the computer,(,the one that plugs into the right side with the fairly long rectangle interface with the 25 little pin holes in the nice array with 4 in a square array next to it) i am sure yall know which one, i just dont know the name.,
anyway, we plugged it in and the projector screen kept running through a dialog, searching for device, ( similar language) but in any case, it was looking for a signal, presumably my computer,,
Could someone please give me the proper procedure for using this projector and hookup with this laptop, do i need to turn off the computer first before hooking up or i have seen closing the lid, ,, anyway,, what is the proper procedure for hooking up to a digital projector,,,,
oh, and one more question,, if the projector is a 1024x768, would my jpeg setting of 1000 on the horiz and 750 on the vert with a 96 dpi be a good setting to get good projection detail as it shows on the laptop screen,,
its a basic wildlife slide show,, like the old days,
thankin all in advance for any thoughts,,,
Kim Kaiser

Hi Kim and welcome!
You have a G4 powerbook, but I'm not sure what model it is.
It sounds a bit newer than my G4 titanium 15"
Maybe it is more like the one at this link?
http://manuals.info.apple.com/en/PowerBookG4_15inch1.67-1.5GHzUserGuide.pdf
Sounds like you are referring to the DVI port on the right side. You also plugged in the adapter that lets a regular monitor(in this case the projector) use that port.
Sounds right so far.
I have Tiger on my computer so my info could be off a bit--take it as it's given: with reservation.
I use the s-video port( the little camera with the "out" written on it) next to that DVI port on your laptop . I bought a long S-viedo cable at radio shack so I could be a bit further from the projector.
When the cables are all hooked up and after I start up the projector, I start up the laptop, open the "system preferences" in the apple menu and open up "monitors". It has a "detect displays" button and I press it.
There is also a little button (maybe only in tiger) that says "show displays in menu bar" I check this button too because it puts a menu at the top of the screen that lets me control the monitors.
If the display shows up on your computer, you also need to turn video mirroring on.This makes whatever you see on your laptop is showing on your TV. There is a check-bow for this OR it is in your menubar now.
The only goofiness that I ran into was that sometimes you have to select the source that the projector is accessing. This is done at the projector end and often with the input button on the remote. If you are using the DVI port with the adapter, then the VGA input needs to be selected on the projector. If you are using the S-video cable(like I do) then you need to select S-video on the projector.
I hope this helps a little bit until somebody else comes along.
rf

My tv does not have a HDMI port, but my cable digital box does can that work?

So my tv is a LCD Monitor and it does not have a HDMI entrance, but I am using a a digital box for my cable which does have a HDMI cable. Is there a chance by connecting it to the digital box I can get it to work. If not, what are my options to make my Apple TV to work? I already bought it.

Will this guaranteed work?
http://www.amazon.com/gp/product/B008FO7PQA/ref=as_li_ss_tl?ie=UTF8&camp=1789&cr eative=390957&creativeASIN=B008FO7PQA&linkCode=as2&tag=solyoutec-20

Cisco Digital Signage Solution

Dicussion arround configuring Cisco Digital Signage Solution

I am looking for a complete configuration set required to seutp a 5 LCD Panel digital signage solution, what components are required ?

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

When you went back to the place where you purchased this phone, & asked them, what did they say?
No one here can help you with this, nor can/will Apple. You need to take this up with whoever you purchased this phone from.

HT1311 Have changed my Apple id to a new email address. its all working fine on my pc and also comes up with the new id on my icloud page on my iphone, but when i tryto buy something from i tunes on the phone the sign in box still has the old id. how do i

Have changed my apple Id to a new email address. its all working fine on my PC and also on come up with the new ID on my icloud page on my iphone but when i try to buy something from itunes etc on my phone, the log in box still contains the old id.
how do i change this?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It doesn't sound like you "changed" your Apple ID, sounds like you created a new one. Bad idea. All content bought with an Apple ID is forever tied to that ID. The ID that bought the content is the only ID that can update the content. Apple does not merge IDs not does Apple transfer content from one ID to another.

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I also had problem accessing my WD MyBookLive after upgrading to Maverick.
To resolve the problem, I used Connect To Server (Cmd K) to specify the IP address.
Then I enter a user id and password I created in the MyBookLive.
You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
Just enter the MyBookLive IP address as the URL.

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

In a FORM search box that i have data saved, how can I go and see what is saved and edit it?

In a FORM search box that i have data saved, how can I go and see what is saved and edit it? Sometimes when I'm doing maintenance it all gets deleted and I would like to be able to see what I have saved before it gets deleted.

Try this - Form History Control extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/12021/

In InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to

This may be a basic question... but in InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to determine what word count we can fit in, and c) how to do it in a table? Thanks!

Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
From the Transform panel you can set a text box's width and height

Acrobat Pro for Mac bought on Amazon;how can I register it?. registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?

I purchased Acrobat Pro for Mac on Amazon. When I try to register with the registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?

If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
Follow the prompts, erase the disk and install OSX Snow Leopard.

The icons for links are gone. In their place are hyphentated boxes. After I click on the link once the real icon comes back. But litterally EVERY link icon is now a hyphenated box till I click once. How can I fix this?

The icons for links are gone. In their place are hyphenated boxes. After I click on an existing link once the real icon comes back. For Example: I have several bookmark links for Amazon. Those links now have hyphenated boxes as their icons not the Amazon icon. Once I click on an existing link the Amazon icon is activated and replaces the hyphenated boxes. Literally EVERY bookmark / link icon is now a hyphenated box till I click once. How can I fix this? I'm running Firefox 8.0 on windows XP. This problem started this week. Before and After upgrading to firefox 8.0 from 7.xxxx. See screen shot example.jpg i've attached below. Double click to enlarge it for better viewing. Any input welcomed. Not a major problem but I would like to have the icons back.
Thanks
Maxboyd

Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

I purchased PSE 13 for windows and have looked everywhere numerous times and I can not find the serial number on the box or the disc sleeves. How am I going to install it without the serial number??

I purchased PSE 13 and looked everywhere for the serial number. It is not on the box or the disc sleeve. How am I going to install it?

Find your serial number quickly

I am receiving an error message from another software (Epub Ultimate) stating: "Authorize Adobe Digital Editions to Generate an AdeptKey". How do I do this?

I am receiving an error message from another software (Epub Ultimate) stating: "Authorize Adobe Digital Editions to Generate an AdeptKey". How do I do this?

See here:
How do I remove older versions of Photoshop?

Hooking up a Cisco digital box to a standard Def. TV. How to

Similar Messages

Maybe you are looking for