Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Similar Messages

How to synchronize Outlook 2007 Calendar and Tasks with my iPhone through use of iCloud

How can I synchronize Outlook 2007 Calendar and Tasks with my iPhone through use of iCloud?

Hello farar,
Thank you for the question. It sounds like you are trying to synchronize your Outlook Calendar with your iPhone using iCloud.
If you have not setup iCloud, the following resource has steps you can take to set up iCloud on your computer and your iPhone:
iCloud -Learn how to set up iCloud on all your devices
http://www.apple.com/icloud/setup/
Once you have iCloud set up, you can enable the Calendar setting in the iCloud settings on both your computer and iPad to sync your Calendar events. Use the following article for steps to enable this feature:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1296 i have been syncing my iphone with my work computer but now I want to switch to my laptop. how?

I have been syncing my iphone to my work PC and now I want to switch to my laptop for syncing. How?

An iPhone can only sync with one library at a time. If you do not wish to have your present iTunes library on the home computer replace the one on the phone you will need to put the content of the work library on the home computer so it is still syncing with the same library
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the iTunes Library.itl file in the moved iTunes folder.
Windows users see tip at: https://discussions.apple.com/message/18879381

TS2776 I changed computers, now my iphone won't sinchrionize either calendar or contacts with Outlook

I changed computers, now my iphone won't synch either calendar or contacts with Outlook. I'm sure there is a quick fix for this, but I haven't been able to find it.
Any suggestions?
Run the diagnostic tool, says I am not an administrator

Did you migrate your user folder/profile from old computer to new computer?

How best to sync Outlook 2007 Calendar ad Contacts to Ipad and Android phone

How best to sync Outlook 2007 Calendar ad Contacts to Ipad2 and Android phone

How to transfer or sync content to your computer
As for the Android device... try googling for options.

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

TS1538 Hi hoping for some help please/ My laptop was in for repair & now doesnt regognise ipad or iphone, it is now being recognised as a camera. Laptop will not allow me to update/reinstall I Tunes. Cannot get driver reinstalled

HI hoping for help pls, laptop was recently repaired& cloned, now will not recognise iphone or ipad, only sees iphone as a camera. Have spent ages trying to reinstall itunes to get so far and for it to fail. TRying desperately to reinstall driver for iphone now , have gotten as far as last steps to find folder in cdrive, found mobile file and there is no driver file at all. Am not the brightest tech lady so any easy to understand tips please am lost and cannot sync either pad or phone.

you have a ps cs4 license for mac and you have some way of finding your serial number.
if yes, download an install the installation file. if you already have the installation file, what is its name and file extension? (eg, if it's one file, it should be a dmg file.)
if you need the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Still hoping for some help - IllegalAccessError

We are working on an application using the dvt:schedulingGantt component. Everything's been moving along fine.... until now. We just started integration test, and we are getting the error below for almost anything we do. We are using the freshly released Patchset 1 in a Liinux environment. All our other environments are Windows, and we still have a slightly older version of the code (build 5512 instead of 5536) on our dev server. But I've been running build 5536 locally for a while, with no problems.
This error occurs when we hover over a task bar, right-click to try to get a context menu on either the task bar or the resource, View->time scale, View->Go To Date, Zoom, etc. Pretty much the only thing that works is that it displays fine at initialization. I figure something must be installed wrong, but I can't imagine what it could be, what could need to be fixed. Does anyone have any ideas?
SEVERE: Server Exception during PPR, #105
javax.servlet.ServletException: java.lang.IllegalAccessError: tried to access method oracle.adfinternal.view.faces.activedata.SessionDataUpdateManager.__getPageDataUpdateManager(Ljava/lang/String;Ljava/lang/String;)Loracle/adfinternal/view/faces/activedata/PageDataUpdateManager; from class oracle.adfinternal.view.faces.activedata.FacesBindingRewiringListener
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:333)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
        at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
        at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.IllegalAccessError: tried to access method oracle.adfinternal.view.faces.activedata.SessionDataUpdateManager.__getPageDataUpdateManager(Ljava/lang/String;Ljava/lang/String;)Loracle/adfinternal/view/faces/activedata/PageDataUpdateManager; from class oracle.adfinternal.view.faces.activedata.FacesBindingRewiringListener
        at oracle.adfinternal.view.faces.activedata.FacesBindingRewiringListener._isPDUMPresent(FacesBindingRewiringListener.java:205)
        at oracle.adfinternal.view.faces.activedata.FacesBindingRewiringListener.afterPhase(FacesBindingRewiringListener.java:67)
        at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:531)
        at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120)
        at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchAfterPagePhaseEvent(LifecycleImpl.java:168)
        at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchAfterPagePhaseEvent(ADFPhaseListener.java:124)
        at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:70)
        at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:364)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
        ... 31 more

Thanks. The team setting up this environment said they found some "classpath problems", which they corrected, and now it's working. I don't know whether that was the problem or not - they did not elaborate. But thanks for the response.

Please help...Very frustrating issue with ipods (shuffle and nano)

I'm not the most computer literate person around, so maybe someone here can help.
I have an IPod Shuffle, my daughter has an Ipod Nano. We seem to be sharing an itunes account, although there's separate links to my Ipod and hers.
The problem is, I can't seem to find my songs. The board comes up blank. When I downloaded one of the songs again, it said it was still there, but I never did find it, or any of the others.
My daughter's songs are all there, and her list is growing bigger with her songs, which is fine.
She says she's not deleting my songs, and I believe her.
I tried to re-install the IPod Shuffle CD/program, but my computer's not having any of that.
Any ideas/tips/suggestions on how I can get my songs back, or at least create a separate account on the same computer?
Thank you.

Saga continues.
ARRRRRGGGHHHHHHH!
see new thread
https://discussions.apple.com/thread/3223202

HT1386 I have been syncing my iphone to my computer for some time. All of the sudden, it will not sync and shows an alarm on the screen that says "the sync session failed to start". What happened?

When i try to sync my iphone to my computer, itunes tells me that the sync session failed to start. What does this mean?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

All was well until 10.7 + MAMP + xCode. Now...misery. Why?

I'm a port from the PC universe. Been loving my iMac since 10.6 for about 2 years now. Recently, I decided to stop programming on the PC and move to the Mac and open source, namely PHP to start. That mean installing MAMP. No harm. Then, I entered the world of debuggin PHP without a debugger. Not fun. So, I joined the installed xDebug. Whoa! Problems all over. Issues Galore. Addressed the issues, joined the $99 developer community, downloaded xCode (for the compiler), upgraded to 10.7 Lion and fixed all sorts of stuff: paths, ini files, got pear working, php-config, phpize, xdebug.so extension.
Now that xdebug works, I downloaded JetBrains PHPStorm for my debugger along with Dreamweaver CS4 that I've owned all along. All should be well and good, but not so.
1. All of my Adobe CS products went to ****. I had to re-install and lost 2 yrs worth of customizations, plug-ins etc. That was Adobe's best suggestion.
2. My external disk drives locked up, there were now permission issues on all, but my internal drive, so I couldn't get to my Time Machine backups. In any case, I had changed so much I'm not sure it would have helped.
3. Reformatted all external drives. Lost all, but nothing there was that precious. One drive is a scratch disk, the other was my backups. I immediately made another TM backup. All went well after re-format.
4. Download OS X.7.3....Whoa, more issues. Mainly permissions. Adobe went to **** again, but I'd already lost everything that mattered, so I trudged through the permissions thing (Library and System seemed to be the primary offenders here). User System now exists everywhere and user "Me" is gone, as is user "Administrators" group. Tried getting rid of user system. Bad, bad idea. Started over, then just tried to add Me and Administrators group. Worked out.
5. Reinstalled Adobe a 2nd time.
6. Now, some of my drivers, namely HP Scanjet aren't working, download, reinstall, fix that.
7. Reinstalling HP drivers mucked up permissions again and I get all these Library permission issues on bootup. Fixed that for the 3rd or 4th time now.
There's more, but you get the idea. All I wanted to do in the beginning was use PHP 5.3 and be able to debug it. Now I have a "hard way" degree in debugging, Unix, and the mac OS. And, I still don't know what I've done wrong.
This permissions issue keeps cropping up. I've done the Verify/Repair Permissions thing a few times, same for the hard drive. doesn't seem to have an noticible effect.
Is there some sort of utility out there (or already here) that will help me get my machine stable once again. I've logged probably 40 hours doing the above and this is darn near reminding me of my life with a PC--but I had 30 years of driving that crate, so it wasn't as frustrating.
It's all about permissions and my user being installed, or not, in various locations that I'm guessing it used to be installed in. Plus, it seems RW permissions have changed to R. I've used Terminal to fix some of this along the way, and get all working correctly, but I'm scared now to turn off the darn machine, or to upgrade "anything" on it.
Advice is welcome.
Regards and thanks to all.
Dan
PS: Crap, I see a 10.7.4 on the OS dropdown. I could have gone all night without seeing that!

It sounds like you're randomly setting file permissions without any idea of what they should be. In nearly all cases, they should be whatever the software installer makes them. On very rare occasions, it may be necessary to repair the permissions of system files after running a defective third-party installer. It's certainly necessary if you've "mucked up" those permissions yourself. You may have mucked them up so badly that they can no longer be repaired in the usual way. In that case, boot from your recovery partition (command-R at startup) and run Disk Utility. That, at least, is safe from being mucked up, but it won't fix everything; only Mac OS system files.
If a third-party product doesn't work, reinstall it, and resist the temptation to change the permissions. If it still doesn't work, contact the developer for support.
Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Hoping for some help with submitting a page

I'm going to explain this as simply as possible, with the hope that someone will not only understand my situation, but will be kind enough to reply. :)
I have a page with three regions, each region has a submit button that branches back to the same page. My problem is mostly with region 3. In region 2, I have several select lists and a submit button. I have a process that (on click of the 2nd GO button) concatenates all the values from my select boxes and saves them to a text (saves state) object (we'll call it RESULTS). It then shows the third region. My problem is: If I want to change some of my select lists and click button 2 again, it doesn't change the value of RESULTS. If I change RESULTS to NOT save state, it displays correctly on changes, but then when I click my third button, it doesn't keep the value (because state isn't saved).
I REEEALLLLY hope this makes sense to someone, as I've played with this for hours now with no idea where I'm going wrong.
Thanks a million!
Steve

Vikas,
Thanks so much for getting back to me. Sorry about the delay in replying - I've attempted to create a duplicate page with the same problem. If you (or anyone) wouldn't mind, please check out my page:
http://htmldb.oracle.com
workspace: westerndoor
username: vikas
password: vikas
Pg. 28
This is a good example of my problem. If you type in "%B%" in the text box and hit the first "GO" button, it will populate the select list of items that match that criteria. Select one of those and a "finish" and a "Texture". Hit the second "GO" button and it will populate the fields that help build my "Results". Then, change the finish and texture and hit the second "GO" button again. The Results field doesn't change. I've been able to get it to work by changing a few objects to not save state, but then my Results object isn't correct (it's empty) when I hit the final button (which is disabled in this app as it inserts data into a table on click).
I hope this makes sense and you can help me out. I'm pulling out what little hair I have left. :)
Thanks!
Steve

When I enter an item in Outlook 2007 Calendar or Contacts,

it will update my iCloud, iPhone and iPod. When if I enter or update an item on my iPhone, my iCloud & iPod will update, but Outlook does not. How can I fix this?

On your iPhone, check Settings > General > Date & Time > Set Automatically = "on".
In iCloud (from the web), sign in to your account, click the Calendar, then the gear in the upper right, then "Preferences", then "Advanced", and choose "Enable Time Zone Support". Read the fine print under this checkbox and make sure you've selected the right time zone.

My iphone 3gs has started showing the wrong time and date. All was fine until this afternoon when it changed. My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?

just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Similar Messages

Maybe you are looking for