Host Agent Service critical - Paging file is too small for this operation to complete

Hi all,
at the moment I have the problem that some of my hosts get in the errorstate critical in VMM 2012 SP1.
The error details in VMM are:
Error (2912)
An internal error has occurred trying to contact the hostname server: : .
WinRM: URL: [http://hostname:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="scvmmagent"]
The paging file is too small for this operation to complete (0x800705AF)
Recommended Action
Check that WS-Management service is installed and running on server hostname. For more information use the command "winrm helpmsg hresult". If hostname is a host/library/update server or a PXE server role then ensure that VMM agent is installed
and running.
On the host i cannot connect to FailoverCluster or Hyper.V Manager. After a restart of the host the Problem is gone and the System is working without any Problems for some days.
The paging file is set to 4GB and the OS is Server 2012.
The hosts have 192GB of RAM.
The configuration of the pagfile didn't change from Windows 2k8R2 to 2012.
I didn't find any Errors in the eventlog. Do you have any idea where to check for that?
Thanks,
Patrick

The hotfix didn't solve the Problem for me either. The WMI crash came again after a couple of weeks.
An additional problem with VDS was detected and the following hotfix was installed:
http://support.microsoft.com/kb/2884597/en-us
Also a problem with Clusterservice was found, sadly MS is tagging this handle leak as "won't fix".
Nevertheless one WMI Instance is still growing...
We are testing a hotfix that so far looks promising. Its a private hotfix only right now. But the file is listed as KB494704 you may want to ask your support engineer to look into it.

Similar Messages

Paging file is too small for this operation to complete.

iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)

Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action.

Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal

Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.

How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more.

How can I perform the conversion of pdf files in Cyrillic script to Word files in Cyrillic script. The pdf file is too small for me to read right now. Julyan Watts

How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.

This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts

No playlist too small for "this playlist will not fit on one audio CD"

What on earth is goin' on w/ iTunes ?! ( In my case it's 7.6.2 (9) )
After having a 91.MB playlist receive the “*The songs in this playlist will not fit on one audio CD"* for a 700 MB audio-CD burn, I searched around here and found this thread . . . granted it's for Windows, but other mentions dating back to Jan. seem to indicate the problems pretty universal.
Anyone know anything more on this ?

And didn't we used to be able to re-edit our postings here?
That URL trick didn't work and looks a mess now !
Yeesh

PGC has an error--data rate of this file is too high for DVD

Getting one of those seemingly elusive PGC errors, though mine seems to be different from many of the ones listed here. Mine is telling me that the data rate of my file is too high for DVD. Only problem is, the file it's telling me has a datarate that is too high, is a slideshow which Encore has built using imported jpg files. I got the message, tried going into the slideshow and deleting the photo at the particular spot in the timeline where it said it had the problem, now getting the same message again with a different timecode spot in the same slideshow. The pictures are fairly big, but I assumed that Encore would automatically resize them to fit an NTSC DVD timeline. Do I need to open all the pictures in Photoshop and scale them down to 720x480 before I begin with the slideshows?

With those efforts, regarding the RAM, it would *seem* that physical memory was not the problem.
I'd look to how Windows is managing both the RAM addresses and also its Virtual Memory. To the former, I've seen programs/Processes that lock certain memory addresses upon launch (may be in startup), and do not report this to Windows accurately. Along those lines, you might want to use Task Manager to see what Processes are running from startup on your machine. I'll bet that you've got some that are not necessary, even if IT is doing a good job with the system setup. One can use MSCONFIG to do a trial of the system, without some of these.
I also use a little program, EndItAll2 for eliminating all non-necessary programs and Processes, when doing editing. It's freeware, has a tiny footprint and usually does a perfect job of surveying your running programs and Processes, to shut them down. You can also modify its list, incase it wants to shut down something that IS necessary. I always Exit from my AV, spyware, popup-blocker, etc., as these progams will lie to EndItAll2 and say that they ARE necessary, as part of their job. Just close 'em out in the Tasktray, then run EndItAll2. Obviously, you'll need to do this with the approval of IT, but NLE machines need all available resources.
Now, to the Virtual Memory. It is possible that Windows is not doing a good job of managing a dynamic Page File. Usually, it does, but many find there is greater stability with a fixed size at about 1.5 to 2.5x the physical RAM. I use the upper end with great results. A static Page File also makes defragmenting the HDD a bit easier too. I also have my Page File split over two physical HDD's. Some find locating to, say D:\ works best. For whatever reason, my XP-Pro SP3 demanded that I have it on C:\, or split between C:\ and D:\. Same OS on my 3 HDD laptop was cool having it on D:\ only. Go figure.
These are just some thoughts.
Glad that you got part of it solved and good luck with the next part. Since this seems to affect both PrPro and En, sounds system related.
Hunt
PS some IT techs love to add all sorts of monitors to the computers, especially if networkded. These are not usually bad, but are usually out of the mainstream, in that most users will never have most of these. You might want to ask about any monitors. Also, are you the only person with an NLE computer under the IT department? In major business offices, this often happens. Most IT folk do not have much, if any, experience with graphics, or NLE workstations. They spend their days servicing database, word processing and spreadsheet boxes.

Error: f14627469cba51.pdf file is too large for attachment

Hi,
Recently we migrated lot of crystal reports from BO XI R2 environment to BO 3.1 SP2 FP 2.5 environment, these crystal reports are integrated with the application.
Input parameters are given through the application using the Open Document URL and the report will open through the infoview.
This particular error arises when we try to open the report as PDF using Open Document URL,
Please find the URL below
http://bodev.com/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=AUwcueYTQwtLhWDlil29Nvc&sOutputFormat=P&lsS@INVOICEDATE=1/31/2010&lsS@REFSERVICEID=1&lsS@BILLINGCYCLE=1&lsS@INVPREFIX=SC1001&lsS@GUID=99b18bcb-9470-4a49-948d-73961c149f5e
But we are getting the following error
"f14627469cba51.pdf file is too large for attachment"
Please help me out to resolve the issue.
Thank You,
Palani Kumar
+91-9840865865

Hi Jeff,
Did you figure out the solution to this problem?
I also getting the same problem while refreshing crystal report from 3rd party tool using dswsbobje service session
"Failed to retrieve binary view of the report. 14546ada1c151418.pdf File is too large for attachment. (WRE 02527)"
Please let me know if you find any solution.

I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for

I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
 Cheers, Tom

Can't open Project - The file format is too new for this version of the pro

Hi everyone
I have the following Problem with my Final Cut Express: When I try to open a project i get an error message: "The file format is too new for this version of the program". (my FCE is in german, this is the google translation!)
I have already erased all the rendering files, but no luck.
Please Help!

Have you recently reinstalled FCE and forgotten to update it?

ERROR : OpenDoc CR to PDF - File is too large for attachment.

We are getting the following error in 3.1 using an OpenDoc call when we call a large Crystal Report to PDF format...
Error : 52cf6f8f4bbb6d3.pdf File is too large for attachment.
It runs OK from BOE when given parameters that returned 44 pages. (PDF = 139 KB)
We get the error on a parameter-set that returns 174 pages when run via CR Desktop or as a SCHEDULED Instance. (PDF = 446 KB).
Client application can't use the SDKs to SCHEDULE Instances - only configured for OpenDoc calls.....
The BOE server is running on SOLARIS - and it's is a 2 Server CMS-Cluster.
The problem is SPORADIC, so I am thinking the issue is related to a specific setting on one of the servers.
Any thoughts on where to start looking...?

Problem is _not _with the number of Rows returned - it is an issue with the size of the PDF file that it is trying to move.
Found a possible WINDOWS solution on BOB - need to find if there is an equivalent for SOLARIS...
Check the dsws.properties on web server D:\Program Files\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\classes
See if you can change any parameter to remove size limitation.
#Security measure to limit total upload file size
maximumUploadFileSize = 10485760

ReportExportControl -- File is too large for attachment

Hi all,
Back with a exception again.
Few reports deployed on BOXIR2 SP4 comes with an error as following
com.crystaldecisions.report.web.viewer.ReportExportControl
15bf5ea9377e1c1.rtf File is too large for attachment.
Few reports take date range as input and generates result based on that. When date range is small report is generated without any problem. If is large and has large set of records(approx above 10K records) then comes up with the above error.
Another set of reports whatever be the case throws this error.
But when the parameters are set in CMS console and run in console report is generated without any problem what ever be the date range.
After searching a lot no solutions in hand!!
Please suggest solutions/possible scenarios / checklist to solve this issue.
Thanks & Regards
lnarayanan

It turns out the report was so large it was basically overloading everything (disk space, cache sizes, timeouts, etc.) ... Here's the solution from the case:
1) For page server and cache server
Make sure location of Temp Files/Cache files has enough free space (more than 500 MB)
2) For page server and cache server
Minutes Before an Idle Connection is Closed = 90
3) For page server
Minutes Before an Idle Report Job is Closed = 90
4) For cache server
Maximum Simultaneous Processing Threads = automatic
5) In the command line of page server and cache server, add
"-requestTimeout 5400000" [without " "]
6) Maximum Cache Size Allowed (KBytes) = set it to an appropriate value (for e.g. for 500 Mb, value should be 500*1024 = 512000)
(This setting limits the amount of hard disk space used to store cached pages. If we need to handle large reports, a large cache size is needed. Maximum allowed is 2048 GB)
After all this, an "Error 500 - Java heap space" happened. The amount of memory allocated to a JVM application can be set using the options -Xms (the initial size) and -Xmx (the maximum size).
Regards,
Bryan

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

"File is too large for attachment." using the Viewer SDK

Post Author: CBurger
CA Forum: JAVA
I'm using the Viewer SDK to retrieve a report from BOE XI 2 SR2.
This is done via the a piece of Java code ...
ReportExportControl exportControl = new ReportExportControl();
ExportOptions exportOptions = new ExportOptions();
IReportSourceFactory psReportSourceFactory = (IReportSourceFactory) enterpriseSession.getService(ReportConstants.REPORT_PSREPORT_FACTORY);
Object reportSource = psReportSourceFactory.openReportSource(report.getID(), Locale.ENGLISH);
exportControl.setReportSource(reportSource);
exportControl.setURI(reportPath.toString());
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
exportOptions.setExportFormatType(exportFormat);
exportControl.setParameterFields(reportParameters);
exportControl.processHttpRequest(request, response, getServlet().getServletConfig().getServletContext(), null);
exportControl.dispose();
The report is generated as an Excel file.
If I call for a small Excel - no problem: a dialog pops up asking me to "save as ..."
If I call for a larger Excel (about 20MB) - PROBLEM "File is too large for attachment."
Unfortunatly I don't find any information in the log files.
Any ideas?

Has this ever been resolved? We are having a similar issue.
Thanks!

File's format is too new for this version of the application

A project that was edited in FCE on an iMac will not open in FCE on a MacBook Pro. When I try to open it, I receive the error: File's format is too new for this version of the application.
The FCE that was installed on the MacBook Pro is exactly same copy as the one loaded onto the above mentioned iMac -- they were each were installed from the same, Apple Store purchased disk.
Thanks for any help.
-Mike

Hi(Bonjour)!
Did you apply the FCE 4.0.1 update on both machines?
Michel Boissonneault

Host Agent Service critical - Paging file is too small for this operation to complete

Similar Messages

Maybe you are looking for