Host Credentials Validation Error - Oracle database on Windows Server 2008
I am trying to log into an oracle database residing on a windows 2008 server through enterprise manager. I keep getting the error Validation error - �. I have added my username to the "log on as bacth job" properties. but I still keep getting this error.
Try also adding:
Logon as a Service and Act as Part of the Operating System.
I assume you are using a domain account and not one that is local to the box being monitored, correct?
Also, in OEM, go to Preferences...Preferred Credentials and enter the user name and password that you are using for the Normal Username and Normal Password and then click test. If this works, you should be good to go.
-Joe
Similar Messages
-
Does Oracle database supports Windows server 2012?
Does Oracle database supports Windows server 2012? If not, when it will be supported?
Hi;
Oracle not certified wiht win8 or win2012. Please check below note:
Oracle - Compatibility Matrices and Release Information [ID 139580.1]
11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
Statement of Direction: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Certification Information for Oracle Database on Microsoft Windows (64-bit) [ID 1307195.1]
Certification Information for Oracle Database on Microsoft Windows x86 (32-bit) [ID 1307189.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
I am trying to install Oracle 9i on Windows Server 2008
Hi
I am trying to install Oracle 9i on Windows Server 2008.
While installing third CD it shows the following error message
"jrew.exe has stopped working"
Please guide me what to do next as early as possible.
ThanksWhy?
The general policy of Oracle is very simple:
it certifies against the current version of the OS.
It never re-certifies against new releases of the OS.
Windows 2008 didn't exist when Oracle 9i was released.
Sybrand Bakker
Senior Oracle DBA -
Installing Oracle 8i in Windows Server 2008 32
Hi! I'm installling Oracle 8i in Windows server 2008 enterprise for 32 bits, but it's finish with error. The error is jrew.
Somebody can install it?
Sorry by my english.
Thank!
AbelOracle 8i on windows server 2008 is not a tested/supported product.
-
Installing Oracle 10g on Windows Server 2008
Hi,
I want to install Oracle 10g on Windows Server 2008. As per Oracle, I should install 10.2.0.3 and then apply patchset 10.2.0.4.
For that, one has to sign in to metalink which is possible only for customers. I am
using Oracle only for educational purposes for now. Is there any other way of using Oracle 10g on Windows 2008?
Thanks,
VladiOf course if you don't have support and for educational purpose only , you should compromise a little by either install other OS or get virtual machine like VMware.
Or stay with 10.2.0.3, that should work in most cases. -
Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit
1.I want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
2.I have followed the steps too as described here in these two forum links:
1.http://cn.forums.oracle.com/forums/thread.jspa?threadID=2245015
2.Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit
3.I am giving my installtion steps..
I have installed JDK: 1.7.0.
I have succesfully installed web logic version wls1035_generic.jar.
I have also installed the FMW version 11.1.1.2.0 using all four disks(Install and donot configure.)
I have also installed patch version 11.1.1.3.0.
But When I am trying to run config.bat then It Stops at Creating Domain at 0%,nothing happens, process is sleeping:
It creates domain of size 9.23 mb and after a long time of approx 900 min It displays "DOMAIN CREATION FAILS".
I have also checked the path ..It doesnt contains any special characters.
Any ideas???Hi John,
As per ur suggestion , I have successfully installed FMW 11g in Windows server without Domain Fail.
1). Installed JDK 1.6u29
2). Installed WebLogic 10.3.3
3). Installed FMW 11.1.1.2
4). Installed FMW 11.1.1.3 Patch
Now According to the Business need ,I want to install FMW 11.1.1.2 in Linux 32 Environment. Can U please guide me the versions of Java, Weblogic, FMW and its patch so that I can Install it in Linux 32 bit without Domain Fail.
Deepak Jha -
Oracle R12 on Windows Server 2008
Hi - does anyone have a good guide or link to a site that does a walk through of installing Oracle R12 on Windows Server 2008?
Thanks!Hi,
Thanks for the guide, anyone with experience in Windows, do you know if the Server goes to sleep, that once it is woken up, that the R12 instance would work fine? I think the application will not be accessible when the server does to sleep.
I would ideally like to let the Server go to "Sleep" when not in use. Once a user wants to test something, they can wake it up using WOL, then login to the instance.What is the point of letting the server goes to sleep? I would say that you may need to bounce some services then which is not a feasible solution -- You may verify this and try it yourself.
Regards,
Hussein -
How to install oracle 10g in windows server 2008
I want to install oracle 10 (10.2.0.4.0) in windows server 2008 R2 X64 bit version.
Previously i have test this successfully. But not it's giving an error during the installation
Enterprise manager configuratio failed due to the following error-
Error starting Database Control
Refer the log file at (path).....\emConfig.log for more details.
You can retery configuring this database wlth Enterprise Manager later by manually running (path).....\bin\emca script.
I tried to start the service manually from services. But it didn't work.
I tried to run that script using command prompt. but nothing happened.
in my start menu under oracle home db-console link also not there.
here is my log file
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
************Certificate was added to keystore
Certificate reply was installed in keystore
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_AX-2009_AX2009\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">
<!-- The default web-app for this site, bound to the root -->
<default-web-app application="default" name="defaultWebApp"/>
<web-app application="default" name="dms0" root="/dms0"/>
<web-app application="default" name="dms" root="/dmsoc4j"/>
<web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />
<!-- Access Log, where requests are logged to -->
<access-log path="../log/http-web-access.log"/>
<!-- Uncomment this if you want to use ODL logging capabilities
<odl-access-log path="../log/http-web-access" max-file-size="1000" max-directory-size="10000"/>
-->
<ssl-config needs-client-auth="false" keystore="D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_AX-2009_AX2009/config/server/keystore.test" keystore-password="BC062AD3D852A5B5D02E979B69DD12B3" />
</web-site>
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleAX2009
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:58 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\AX2009\emConfig.log for more details.
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
at java.lang.Thread.run(Thread.java:595)
please if any one can give me any solution to run my database console. i don't know any method. i'm new to the oracle.
Thank youI have checked that. but i also say that oracle 10g (10.2.0.4 ) support for windows server 2008 r2 X64.
Windows Server 2008 x64
Oracle Database 10g Release 2 (10.2.0.4 or later) for Windows x64 is certified on Windows Server 2008 x64 (all editions). 32-bit Oracle Database Client (10.2.0.4) and higher versions are supported on Windows Server 2008 x64.
I don'y think it's problem of os version or oracle version. Because when we purchase we asked from them what is the recommended version for our os. they told that 10g 10.2.0.4 is ok. previously i have installed this successfully. But now i can't.
however thanks for tried to help me. if u can find out any other reason\s please late me know..
thank you very much. -
Oracle 10g on Windows Server 2008
Hi dears;
OS: Windows Server 2008 R2 Standard (SP1) 64-bit
Processor: Intel(R) Xeon(R) CPU E5645 @2.40GHz
RAM: 8GB
Oracle: Oracle 10g EE R2 (10.2.0.1.0) 32-bit
As soon as the installation is OUI reports an error message and quits.
Message: Abnormal program termination. An internal error occured. Send following files to oracle support.
"Unknown"
"Unknown"
"Unknown"
Please help.if you search on this forum you will find similar thread talking about this , so please search first before posting new thread
Oracle Database 10.2.0.1.0 is not certified on Microsoft Windows x64 (64-bit) 2008
Oracle Database 10.2.0.1.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2
Only :
Oracle Database 10.2.0.4.0 is certified on Microsoft Windows x64 (64-bit) 2008
Oracle Database 10.2.0.5.0 2008 , 2008 R2 -
Crystal Reports XI stopped working error message on a Windows Server 2008
We recently installed Crystal Report XI in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
"Crystal Reports has stopped working"
Problem signature:
Problem Event Name: BEX
Application Name: crw32.exe
Application Version: 11.0.0.1282
Application Timestamp: 422d5c77
Fault Module Name: StackHash_1fc1
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7ef2fbfc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 1fc1
Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
Additional Information 3: 2f92
Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
Any recommendation on what is causing this error?
Thanks,
LuisHi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
The error I'm getting when trying to start the service is:
The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy -
Oracle XE for windows server 2008 64 bit
I have windows server 2008 64 bit
I want to install a express edition on it
but does't getting source link to download
any one knows pls tell meHi Nine;
Please see:
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
Also see:
XE on MS Windows Server 2008?
Regard
Helios -
ORACLE_HOME in Oracle RAC 11g (Windows Server 2008)
Hello,
I've got two (2) nodes in an Oracle RAC 11g in Windows Server 2008. Oracle software is installed in C:\app.
I realized that it's not been set ORACLE_HOME path. In System Properties-> Advanced -> Environment Variables, I see that ORACLE_HOME is empty.
- Which path would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1
- Do you have to setup the same in both nodes?
ThanksI realized that it's not been set ORACLE_HOME path. In System Properties-> Advanced -> Environment Variables, I see that ORACLE_HOME is empty.its normal behaviour
- Which path would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1if you installed that location, yes
- Do you have to setup the same in both nodes?actually, you dont HAVE TO, its not needed at all -
Hi!
Having using Windows Server 2008 R2 we got crashs with stop error message that contains the following:
SYSTEM_SERVICE_EXCEPTION
*** STOP: 0x0000003b (0x00000000c0000046, 0xfffff80001af9760, 0xfffff88016193f50,
0x0000000000000000)
Server is operated for a 4 month already, but crashs started just some days ago.
Here is a zipped Minidump folder:
https://drive.google.com/file/d/0B2zc7Tzw9BkGb2hBc1h0elU4dUE/view?usp=sharing
Hope, it will help to resolve my problem
Thanks in advance!!*******************************************************************************
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000046, Exception code that caused the bugcheck
Arg2: fffff80001af9760, Address of the instruction which caused the bugcheck
Arg3: fffff88016193f50, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000046 - An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.
FAULTING_IP:
nt!RtlRaiseStatus+18
fffff800`01af9760 488b8424b8010000 mov rax,qword ptr [rsp+1B8h]
CONTEXT: fffff88016193f50 -- (.cxr 0xfffff88016193f50)
rax=0000000000000000 rbx=00000000c0000046 rcx=fffff88016193f50
rdx=0000000000000001 rsi=0000000000000001 rdi=fffff88004082180
rip=fffff80001af9760 rsp=fffff88016193e90 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=fffff880161944a8 r12=0000000000000000 r13=0000000000000000
r14=fffffa8027026060 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00000286
nt!RtlRaiseStatus+0x18:
fffff800`01af9760 488b8424b8010000 mov rax,qword ptr [rsp+1B8h] ss:0018:fffff880`16194048=6097af0100f8ffff
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0x3B
PROCESS_NAME: 1cv7s.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80001ad6f01 to fffff80001af9760
STACK_TEXT:
fffff880`16193e90 fffff800`01ad6f01 : fffffa80`209c72e0 fffffa80`209c71b0 fffff880`0646fda0 fffff880`06464000 : nt!RtlRaiseStatus+0x18
fffff880`16194430 fffff880`06471f70 : fffff8a0`00000001 fffffa80`00000001 fffffa80`273fdb00 00000000`00000000 : nt!KeReleaseMutant+0x281
fffff880`161944e0 fffff8a0`00000001 : fffffa80`00000001 fffffa80`273fdb00 00000000`00000000 00000000`00000000 : UPKey+0xdf70
fffff880`161944e8 fffffa80`00000001 : fffffa80`273fdb00 00000000`00000000 00000000`00000000 fffff800`01ae0c16 : 0xfffff8a0`00000001
fffff880`161944f0 fffffa80`273fdb00 : 00000000`00000000 00000000`00000000 fffff800`01ae0c16 fffff8a0`05dd39f0 : 0xfffffa80`00000001
fffff880`161944f8 00000000`00000000 : 00000000`00000000 fffff800`01ae0c16 fffff8a0`05dd39f0 fffff8a0`05dd39f0 : 0xfffffa80`273fdb00
FOLLOWUP_IP:
UPKey+df70
fffff880`06471f70 ?? ???
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: UPKey+df70
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: UPKey
IMAGE_NAME: UPKey.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 44f6bd6d
STACK_COMMAND: .cxr 0xfffff88016193f50 ; kb
FAILURE_BUCKET_ID: X64_0x3B_UPKey+df70
BUCKET_ID: X64_0x3B_UPKey+df70
Followup: MachineOwner
20: kd> lmvm UPKey
start end module name
fffff880`06464000 fffff880`0647c500 UPKey T (no symbols)
Loaded symbol image file: UPKey.sys
Image path: \SystemRoot\System32\Drivers\UPKey.sys
Image name: UPKey.sys
Timestamp: Thu Aug 31 12:43:57 2006 (44F6BD6D)
CheckSum: 00024B95
ImageSize: 00018500
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Bug Check Code 0x3B: https://msdn.microsoft.com/en-us/library/windows/hardware/ff558949%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
The issue seems to be coming from UPKey.sys driver which its version dates since 2006: http://www.tweakmysystem.com/fixerror-exe/upkey.sys.html
Please try using an up-to-date version or remove the product.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Oracle Discoverer on windows server 2008
I'm looking for oracle Discoverer download on windows server 2008(32 bit). I tried looking on ORACLE.COM but I'm not able to find one.
Can someone point me...Hi
Here is the link: http://www.oracle.com/technology/software/htdocs/devlic.html?url=/technology/software/products/ias/htdocs/101202.html
However, you may be disappointed because according to this matrix: http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html it does not look like Server 2008 is a supported platform. I would ask Oracle Support to be sure or perhaps someone from Oracle reading this will advise.
When you get there you need to read the license agreement and then check and click the I Accept button to indicate that you understand and are willing to abide by the agreement.
Assuming you get the all clear, when you get to the main downloads page if you want the full application server you want the first row, if you want just Discoverer Plus / Viewer you want the row entitled Business Intelligence. You then look across the row for your operating system and then download all of the files that begin with CD. In your case because you are looking for the Microsoft Server version you need the software from the first column headed Microsoft Windows. Incidentally, if you need Discoverer Administrator and / or Desktop then it is also in the Microsoft Windows column and it is called Tools CD.
After you have installed Plus / Viewer (they both install at the same time) you version will be 10.1.2.0.2. This is the base version. You then need to log into MetaLink and download the 10.1.2.3 patch followed by the latest cumulative patch. This page on my blog will help with patch numbers: http://learndiscoverer.blogspot.com/2008/04/most-useful-patch-numbers.html
Best wishes
Michael -
Error 0x80070543 when activate Windows Server 2008 Backup Features
Hi, When I try to activate the Window Server 2008 Backup Features, the system prompt me an error. please review below message appear at event viewer. Not sure how it happen / solve it?
"Installation failed.
Features:
Windows Server Backup Features
Error: Attempt to install Windows Server Backup failed with error code 0x80070543. Cannot open an anonymous level security token
Error: Attempt to install Command-line Tools failed with error code 0x80070543. Cannot open an anonymous level security token"Hi,
Have you checked the link Simon provided? Any progress?
For your information, the Servermanager.msc is dependent on the .NET framework. Any improper modification of the "Default Authentication Level" will cause the COM
modules related to .NET framework abnormal. When we attempt to install of Roles and Features to impersonate as ANONYMOUS LOGON, this security context doesn’t have permission on any of the System Folders and hence we are failing with the above error listed.
To fix the issue, please configure the related settings to default as the KB971509 suggested.
Thanks.
Nina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Maybe you are looking for
-
Getting Adobe Lifecycle Error when opening the pdf document to provide comments
Hi All, I am getting AdobeLifeCycle Error message when I am trying to give comments in the pdf document. I have a workaround in place for the same but I want a permanent fix. PFB the workaround for the same: 1.Delete the Adobe folder from the users l
-
DataGrid in a DataGrid - Flash Builder 4 Beta 2
My dear friends, hi... There is a problem here: I have a Flex and WCF webservice project... One part of my project is look like this: I wonder what kind of controls should I use for this part? Something like Grids, Lists or something like Repeater in
-
I add in stage four textfields naming letter1, letter2 ... I want with a button click to add text in someone of this textfields. This is the code. for (var i:Number = 0; i<4; i++) { var txtFld:TextField = new TextField(); txtFld.name = "letter"+i add
-
My new MacBook doesn't come with Bootcamp
I just got it yesterday. It came with Leopard. I tried to look for it in the installation DVD 1, but the folder doesn't exist. That's what I typed in //Volumes//Mac OS X Install Disk 1/System/Installation/Packages/
-
How does time machine handle initial backup after upgrading to Yosemite?
HI All, I'm wondering if Time machine will create a "new" full backup of the system after I upgrade to Yosemite. I'm trying to make sure I can backout (revert to previous backup of Mavericks) of the upgrade should I run into trouble. Thanks, Eddy817