Host name network change notification

I recently installed Lion Server, and it is daily (sometimes more often) producing messages about "Host name of $mymachine.local has changed to $mymachine.local" (that is, no change) ...
Any obvious reason why this should happen, and what one should do about inhibiting it?
Thanks in advance,
khb

Hello, since some days I encounert the same issue! As my MAC mini server has loads aof I/O Errors, I am wondering if this is a possible root cause for this? On the other hand, why? What happens and what has the change of the Hostname to do with I/O-Problems? Many thanks in advance for any response! Best rgds, Martin

Similar Messages

Network change notification

We are getting a error alert on our Mac mini OS X 10.7.5 of
Network change notification for "servername1". the host name of "servername1" has changed to "servername1". some service may not work correctly unitl they have been updated to use the new configuration.
what error is this, how do we fix this. please need your assistant

Hello, since some days I encounert the same issue! As my MAC mini server has loads aof I/O Errors, I am wondering if this is a possible root cause for this? On the other hand, why? What happens and what has the change of the Hostname to do with I/O-Problems? Many thanks in advance for any response! Best rgds, Martin

Host name is changing all the time

Hi
The host name of my Mac is changing all the time
I recently bought a new camera and connected it
this may be the problem?
What should I do?

There are several possible causes for this problem.
1. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
2. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
3. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
4. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
5. See also this support article.
Rename the computer in the Sharing preference pane.

10.5 server changes host name when changed to be member of 10.4 OD Master

Hi,
I have a Xserve with 10.4.11. This is my working OD master hostname: AAA, FQDN: AAA.domain, realm DOMAIN. Now I have a PowerMac G5, hostname BBB, FQDN BBB.domain, where I install 10.5 server.
When it comes up as stand alone, the hostname is BBB (FQDN BBB.domain), but when I then connect it (as domain member) to my OD master, it promts me to say that "AAA" is a used hostname and that it changes hostname to" AAA (2)".
In my DNS it is still identified as BBB.domain, and it is bind to the realm as BBB.
Why does it act like this?
Subsequently I can't get kerberos to work and SMB does not want to be a member of the domain (always get back to standalone instead of becoming member of the domain).

Here comes a bit more on this one. I waited and maybe this had to do with having a OD master in Tiger and the OD member on Leopard. But now both are in Leopard. And things are the same.
I have thou been studying the Console after some tips. And I'm changing the host name in Server Admin/Network to BBB (what it should be). And it seems to work fine. Name of the server changes where supposed to (what I can see). And in Console I can se that the administration tool changes host name in a variety of places.
And now I wait.
If I do nothing (the network is pretty small), nothing happens. But after a while, I login with for example Remote desktop the followingapears in Console:
+Jan 3 12:58:02 emil mDNSResponder[30]: User updated Computer Name from AAA (2) to AAA+
+Jan 3 12:58:02 emil mDNSResponder[30]: afpovertcp.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: ssh.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: sftp-ssh.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: servermgr.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: rfb.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: ldap.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: net-assistant.udp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: adisk.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: User updated Local Hostname from AAA-2 to AAA+
+Jan 3 12:58:03 emil mDNSResponder[30]: Local Hostname AAA.local already in use; will try AAA-2.local instead+
+Jan 3 12:58:03 emil mDNSResponder[30]: afpovertcp.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: ssh.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: sftp-ssh.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: servermgr.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: rfb.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: ldap.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: net-assistant.udp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: adisk.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: User updated Computer Name from AAA to AAA (2)+
+Jan 3 12:58:03 emil mDNSResponder[30]: User updated Local Hostname from AAA to AAA-2+
+Jan 3 12:58:03 emil mDNSResponder[30]: mDNS_SetFQDN - hostname unchanged+
"AAA (2) to AAA" may as well be "BBB to AAA". But I'm very surprised over that the logg claims that "User updated Computer name..." For all I know, I haven't. And note in the middle here that the mDNSResponder changes to AAA (which indeed is used - it's the OD master!!!), discovers that the name is in use, and then changes to "AAA (2)".
But why does it at all initiate a change from AAA to "AAA (2)"?
Why can't I call the server BBB?

Configuration changes when the host name gets changed

hi,
Can you please let me know what I should change and where if I change my host name after installing EP NW'04?
Anything in Config tool and anything in DB?
Chandra.

Here you go:
We used a combination of these 2 docs to do it successfully.
SAP Note: 757692
Good HP Doc on it.
http://docs.hp.com/en/T2357-90007/ch03s06.html
jwise

Local host name keeps changing

My mac just started giving me a weird message when it wakes up after going to sleep. This computer's local hostname "Macintosh-8.local" is already in use on this network. The name has been changed to "xxxxxx-9.local". To change the local hostname, open System Preferences and click Sharing, then click "Edit" and type the name in the Local Hostname field. This is about the 8th time it's done this to me in the last couple weeks.

This also happened to me over the last few months when my iMac was connected to an Airport Extreme via ethernet, with wifi turned off. There are no other units on the network with the same name; eventually my iMac name incremented to (name)8756. After much research on this and other support sites (and many attempts following sugestions, including rebuild) I found that removing the ethernet connection and using wifi only fully resolved the issue. My problem is that other macs connecting to the shared disk and printer on the iMac are now slower and I cannot sleep the iMac. When connected to the AE I used "wake up on ethernet request", which I believe caused the issue due to interactions between the iMac, router and the AE bonjour service. I can connect the disk directly to the AE, but I repeatedly read that Apple do not support Time Machine on AE shared disks - even though they work better and more reliably than the shared iMac disk.
iMac now on 10.7.4; AE on 7.6.1. I do not know precisly when the issue started. The issue is totally repeatable - just connect to the AE via ethernet, turn off wifi. I suspect a bug somewhere, any help would be appreciated as I like the previous speed and do like to sleep the iMac.

Host name changed on server after router reboot?

I recently installed a new router and when I started my Mac Pro the server (10.7.5) Serverwould not respond and I received an error message stating the host name has changed on my server. I can not recall what I did nut I got the server working. I had to reboot teh router again and have received the following email:
From: [email protected] (System Administrator)
Subject: Network change notification for discussion.pharmweb.net
Date: 26 January 2013 12:48:52 GMT
To: [email protected]
The host name of discussion.pharmweb.net has changed to discussion.lan. Some services may not work correctly until they have been updated to use the new configuration.
I can not get the server to respond to web requests and am not sure what to change, Sharing is showing my local hostname as discussion.local
Help...

Are you sure it wasn't just the server's LAN IP that changed?
Is it set to Manual ?
If your server is behing a router with a NAT address, then a change in the public IP shouldn't have caused that error. I bet your LAN IP changed and now you don't have port mapping correct. pherhaps the public IP changed also, but my money is on the LAN address.
If its the LAN address, there is no point waiting for the ISP.
Set it back to the address it used before and make sure the router provides NAT with port mapping to that address.
Thats all in your control, not the ISP.

Zombie Changes to Domain/Host Name in Mail Settings Window

For the second time since setting it up, the domain name has changed from "domain.com" to "local", and the host name has changed from "myserver.domain.com" to "myserver.local".
This tends to screw up my mail services.
I cannot determine why this would change, by itself, without any external intervention from anyone.
Suggestions?

Thanks for your reply!
The server is configured with static IP and running DHCP, DNS and mail, connectet to a D-Link router (the router also acting as a firewall). The DNS is configured with forwarder IP-addresses to the ISP and Google. Domain/hostname is changed from server.ljungh.net to server.local in postfix/main.cf (and other config files) and triggered if internet connection is lost by rebooting the router (or if internet connection to ISP is down for some other reason). Everything is working fine as long as the internet is up and running. The server is not acting as a firewall or multiple-network-controller.
Output from changeip -checkhostname:
Primary address = 192.168.0.196
Current HostName = server.ljungh.net
DNS HostName = server.ljungh.net
The names match. There is nothing to change.
dirserv:success = "success"
Output from dig server.ljungh.net:
; <<>> DiG 9.6.0-APPLE-P2 <<>> server.ljungh.net
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61515
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;server.ljungh.net. IN A
;; ANSWER SECTION:
server.ljungh.net. 10800 IN A 192.168.0.196
;; AUTHORITY SECTION:
ljungh.net. 10800 IN NS server.ljungh.net.
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun May 30 16:45:38 2010
;; MSG SIZE rcvd: 65
Output from dig -x 192.168.0.196:
; <<>> DiG 9.6.0-APPLE-P2 <<>> -x 192.168.0.196
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 27573
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1
;; QUESTION SECTION:
;196.0.168.192.in-addr.arpa. IN PTR
;; ANSWER SECTION:
196.0.168.192.in-addr.arpa. 10800 IN PTR server.ljungh.net.
;; AUTHORITY SECTION:
0.168.192.in-addr.arpa. 10800 IN NS server.ljungh.net.
;; ADDITIONAL SECTION:
server.ljungh.net. 10800 IN A 192.168.0.196
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun May 30 16:46:01 2010
;; MSG SIZE rcvd: 105

Active Message When you have invalid host name in Proxy Server

I have an issue with one of our customers.
To communicate with any external parties, we have to define the host name in proxy server(Firewall).
I noticed that when we configure a WCF or HTTP adapter with an invalid host name of https url address, the messages remain active.
I am using ESB Toolkit in my implementation but I reproduced same issue using Orchestration with static port and dynamic port.
I traced the message using Fiddler and I noticed that we only have one hit with Status Code 407(407 proxy authentication required) and it is not retrying which is not a risk to my implementation. However, I consumed a web service using a console application
and I set an invalid host name for url but I noticed there are two hits in Fiddler one is 200 http status code and the second hit 407 http status code and I could catch the exception.
The question is: How to enforce BizTalk to suspend these messages or how to handle these messages?
Note that I did the followings trials but no lucks:
- I updated retry count to zero
- Delivery Notification of the Port is Transmitted
- updated closeTimeout, sendTimeout, openTimeout values
Thanks in Advance
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi Mohan,
You are getting "The remote name could not be resolved" because you are not using Proxy.
I tried to tweak on Retry Count(tried zero,1,2...). I am sure it is not retrying because there is not any network hits or packets in Fiddler or WireShark and messages stay forever.
ESB is not my issue because I reproduced same issue with a simple orchestration consuming a service with a static send port.
I have the following notes:
- In console application and Biztalk application using WireShark I can see same number and types of network packets in both cases.
- I tried to change https url to http with incorrect host name in this time retrying is working and message suspended after exceeding retry count.
- I tried to use https which is the required one with correct host name and change service name, I could see client OK Hello and server OK Hello and retying working fine and message suspended after that.
I think the issue with handshaking with proxy server because I could not see client Ok and Server ok hello when changing the host name.
There is another thread talking about an issue with active message and handshake.
https://social.technet.microsoft.com/Forums/en-US/736f0f72-ccc9-4a84-802a-7a1ff788a04a/ssl-2way-cert-incident-remains-active?forum=biztalkgeneral
But the question remains open that how we can handle this active message and why BizTalk not throwing an error?
Thanks,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Host name problems

Hi,
I have a server set up with something.info as the host name, and everything is set up so that I can point the browser to something.info and it reaches the server. But I keep getting alert messages that my host name has changed, at random, to something.info.home. I have done absolutely nothing to provoke the change, and when I change it back to something.info it won't be long before it changes to something.info.home.
Is there a reason for this?
Thanks.

Hi Agliano,
changing the Hostname of a Server after BO is installed is a bad idea ! The WAR files for your Tomcat are in some sort "hardcoded".
I would suggest re- deploying your war files on the Tomcat would fix this issue. Check SAP Note - 1308027 for assistance.
Regards
-Seb.

Why does the local network and computer name keep changing?

After upgrading to Yosemit the local network name and computername on my iMAC keep changes link:
Mycomputer-1
Mycomputer-2
Mycomputer-3
Why?
I have tried to change it back in sharing and network locations.
Is this also the reason the my iPhone cannot find my iPhone often cannot find my iMac when I will sync it? Then I have to restart the iPhone and iTunes on the computer. This happens very very often.
Maybe it also linked to these errors which the log is full of - many every minute:
19/10/14 12.11.09,522 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:256
19/10/14 12.11.09,543 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:12856
19/10/14 12.11.09,561 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:0
19/10/14 12.11.09,565 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:44032
I think the is some bug/clash between bonjour and other network protocols. That is only a guess.

After resetting the computer name and local host name to the correct name without the number I also shotdown my iMac, my AppleTV, my iPhone, my iPad and then rebooted my Airport/Time capsule it seemed to work at least for several days. But yesterday I discovered that my Apple TV now also has changed name to Apple TV (2).
I logged into iCloud.com to see my devices and here it was really wired. My Apple TV was called Apple TV (2) and my iMac also had (2) after the name. Then I checked it on the iMac but here it was correct! Why can it have one name on the iCloud and another on the computer.
I restarted both the iMac, Apple TV and Airport Time capsule then everything was correct also on iCloud.com.
But today the iMac was called the name (2) again on the iMac. And now the local host name also had -2 after the name. It has not always been both names that has changed. That is really wired. And today Wifi was not working on the iMac after wake from sleep. I changed the name back and rebooted again also the Airport Time capsule. Now it is working again.
The log is still full of this messages:
02/11/14 19.22.13,186 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:1901
02/11/14 19.22.25,738 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:34051
02/11/14 19.22.25,758 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:12342
02/11/14 19.22.25,900 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:34051
02/11/14 19.22.25,919 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:1901
02/11/14 19.22.27,636 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28772
02/11/14 19.22.27,683 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:27693
02/11/14 19.22.27,714 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28533
02/11/14 19.22.49,833 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:29281
02/11/14 19.22.49,866 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28528
The name is not the only problem. Often itunes will not find my iPhone and iPad. Then i need to close iTunes and restart the iPhone and iPad then it works for some time.
And the iPhone and AppleTV will not always wake the iMac from sleep. I am wondering if the is linked to the changing of name.
I have seen by googling that it can be related to a sleep proxy problem so it seems like that here is two devices on the net with the same name that is why name is changing, but to know this do not help me to solve the problem. I have also seen all the suggestion to turn almost every services off on the computer, but again I it is not a solution and I have the iMac and devises to use the functionality not to shot everything down. So I do not really understand people saying turn off itunes, turn off blueboth, and turn off this and that.
Apple must soon come with a real solution. We are really many people have these problem since we upgraded to Yosemite and iOS 8.
I have also listed some of the iTunes errors from the log below:
02/11/14 19.24.48,160 com.apple.xpc.launchd[1]: (com.apple.quicklook[1364]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
02/11/14 19.24.52,279 Console[1368]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
02/11/14 19.25.06,907 iTunes[480]: Entered:_AMMuxedDeviceDisconnected, mux-device:5
02/11/14 19.25.06,908 iTunes[480]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:5
02/11/14 19.25.06,908 iTunes[480]: tid:17d8b - Mux ID not found in mapping dictionary
02/11/14 19.25.06,908 iTunes[480]: tid:17d8b - Can't handle disconnect with invalid ecid
02/11/14 19.30.19,234 com.apple.usbmuxd[56]: _SendAttachNotification Device 30:f7:c5:30:b8:2b@fe80::32f7:c5ff:fe30:b82b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
02/11/14 19.30.22,192 soagent[429]: Can't allocate SOHelper <SOMessageHelper: 0x7f9053a102c0> inside com.apple.soagent
02/11/14 19.30.54,871 iTunes[480]: Entered:_AMMuxedDeviceDisconnected, mux-device:6
02/11/14 19.30.54,871 iTunes[480]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:6
02/11/14 19.30.54,871 iTunes[480]: tid:1a23b - Mux ID not found in mapping dictionary
02/11/14 19.30.54,871 iTunes[480]: tid:1a23b - Can't handle disconnect with invalid ecid
02/11/14 19.32.06,137 com.apple.usbmuxd[56]: _SendAttachNotification Device 30:f7:c5:30:b8:2b@fe80::32f7:c5ff:fe30:b82b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.

Cannot resolve host names on local network

It is a local network with router, few Windows computers with shared drives and one Mac.
Windows shares appear correctly in SHARED and can be used without any problems, like iTunes and iPhoto libraries are on those shared drives and work properly, even if ip address of those computers would change.
BUT - if I am trying to use VNC and connect to hostname:port, it says that server is not specified. If I try to ping hostname it says Unknown host.
At the same time, similar ping from Windows computer work without any problems.
It could be possible that router does not support something standard and communicates with Windows using something windows-specific, but what confuses me is that I can see computer names resolved in the finder already! Also, as I said iTunes and iPhoto can work with shared files on dynamic ip's which would be not possible if host names would be not resolved.
Thanks.

Domain Name Resolution for local IP addresses require a Local DNS server running on your network.
Bonjour names will resolve without a Local DNS server. So this is why iTunes and iPhoto works as they use bonjour technology.
A bonjour name ends in .local so in your macs sharing preferences you give the mac a name of imac its bonjour address is imac.local
Other than that you are best giving your devices fixed IP address and adding there hostnames to your hosts file.
the contents of /etc/hosts on your mac would look like
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
so at the above that you could add for example
192.168.1.5 mypc
192.168.1.6 myprinter
Then you could ping 192.168.1.5 by
ping mypc
So would have to add these entries to each hosts file on every computer on your lan.
Or you could setup a local dns server and give each computer on your LAN a fully qualified domain name.

Changing the Host Name in Lite Database

Hi,
I am using oracle 10g Database release 2 and oracle 10g Lite Database Release 3
OS is Windows 2003 Server
I changed the host name
“Old Name Oracle10g New Name OracleTENR1”
Also change the host name in Listener.ora and tnsname.ora after that i restart the machine
I checked the Database status (it is in OPEN STATE only )
And then I start the mobile server it's not working ….
How to change the host name in the oracle 10g Lite Database ?
Please Advice
Thank U
SHAN

hi,
Thanks Fot the Reply ......
I have changed the hostname in webtogo.ora
Mobile Server is Working...
But the Problem is "with the Browser http://localhost/webtogo it shows this error message in the Screen"
500 Internal Server Error
java.lang.NullPointerException at oracle.lite.web.util.TaggedHtml.parse(Unknown Source) at oracle.lite.web.util.TaggedHtml.init(Unknown Source) at oracle.lite.web.WebtogoLogonPage.init(Unknown Source) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:119) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
Please Advice.....
thank U
SHAN

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Changing host name of JDI server

Hi,
during installation of JDI I used ip-addresses as host names for defining the domain host, the SLD server in domain definition, the dtr server URL in track definition, the CBS server URL in track definition.
I know that one shouldn´t use ip-addresses at all but we did have some trouble with the network infrastructure (DNS-Server, ...) at the beginning and the start of the project couldn´t be delayed.
Now, for any reason, the network department gave our server a new ip-address.
I then opened the CMS configuration tool and tried to change the host names (this time not to ip-addresses because DNS-Server works properly in the meantime).
Changing domain data is no problem. But when I try to save the changes of my track(s) I get an error message that says I should contact my administrator. I am the administrator
My Questions:
How is it possible to change the host names of JDI tracks?
What is to do at client side? There are already some developers working with the dev. configurations. Is it sufficient to change the according entries in the .confdef file or do the clients have to donwload the new dev. configuration from CMS host?
Thanks in advance
Helmut

Hello Helmut,
it should be possible to change the host names for tracks. You can get more error message details in the trace file of the Engine. To do so connect to your engine with the J2EE Administration Tool and check the defaultTrace.trc File in the Log Viewer.
For more details how to find this trace information have look into the Change Management Server Problem Analysis Scenarios (Link: http://help.sap.com/saphelp_nw04/helpdata/en/81/4bce4016d28031e10000000a1550b0/frameset.htm). In the first Scenario Incorrect Initial CMS Configuration you can also find the general information how to read and find the CMS trace files.
Please open a CSN message for the component BS-CTS-CMS if can not find the reason for the error message or if it is real problem in CMS.
Best Regards, Michael

Host name network change notification

Similar Messages

Maybe you are looking for