Host update information not same between WSUS server(Up/Downstream)

Hi,
I have two WSUS server (in win server 2012).
HOST connect to WSUS1, WSUS1 sync WSUS2, WSUS2 sync Microsoft update server(internet).
In WSUS1, Host update states is 100% and last report at 2014/05/28 AM 10:00.
In WSUS2, Host update states is 95% and last report at 2014/05/28 AM 10:00.
WSUS sync at 2014/05/28 AM 17:00
What is the problem?
Kevin

Am 29.05.2014 schrieb kevinbolton:
I have two WSUS server (in win server 2012).
HOST connect to WSUS1, WSUS1 sync WSUS2, WSUS2 sync Microsoft update server(internet).
In WSUS1, Host update states is 100% and last report at 2014/05/28 AM 10:00.
In WSUS2, Host update states is 95% and last report at 2014/05/28 AM 10:00.
WSUS sync at 2014/05/28 AM 17:00
Pls run Server Cleanup Wizard in Options on both WSUS-Servers.
Servus
Winfried
Gruppenrichtlinien
WSUS Package Publisher
HowTos zum WSUS Package Publisher
NNTP-Bridge für MS-Foren

Similar Messages

[Forum FAQ] WSUS Configuration Manager failed to subscribe to update categories and classifications on WSUS Server

Symptom:
You might see an error in Software Update Point Status Message when you run software updates synchronization. (Figure 1)
WSUS Configuration Manager failed to subscribe to update categories and classifications to WSUS Server “Server Name”
Figure 1
When you check the WCM.log, WSUSCtrl.log and wsyncmgr.log. There is an error in WCM.log-“Category Product:6d76a2a5-81fe-4829-b268-6eb307e40ef3 (Windows 7 Language Packs) not found
on WSUS”. (Figure 2)
WCM.log:
Figure 2
Cause:
Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise. The Windows 7 language packs can be installed only from the Optional
Updates section in Windows Update. However, these language packs are not available on the Microsoft Windows Server Update Services (WSUS) server or through the Microsoft Download Center.
For more information, please review the link below:
Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise
http://support.microsoft.com/kb/2534462/he
Resolution:
Go to Administration -> Overview -> Site Configuration -> Sites -> Right-click CAS -> Configure Site Components -> SUP Products tab, uncheck “Windows 7 Language
Packs”, then sync again. (Figure 3)
Figure 3
After Sync successfully, the “Windows 7 Language Packs” option disappeared. (Figure 4)
Figure 4
Alternative:
About installing Windows 7 language packs, you could use SCCM 2012 Package feature (download manually) or Windows Update.
http://windows.microsoft.com/en-HK/windows/language-packs#lptabs=win7
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I managed to fix my issue by coping the Client, ClientUpgrade, and Scripts from the files from SCCM install discs folder SMSSETUP to c:\program files\Microsoft Configuration Manager folder. I noticed that some of the files in the scripts
folder was missing and I copied the other folders over because I felt that maybe my local copy of the Client installer where missing some key files as well. Once I did that and disabled software update push, restarted the wsus computer, and re-enabled
the software update push it was able to publish the client and start installing it that way.
I thing the initial log messages where pointing me in the wrong direction for a few hours because I was thinking it was permissions as well and kept trying to figure that out but in the end I do not believe any of that was the reason I was receiving the
same error as you where.

Client machine not reporting to wsus server

My server Windows Server 2008 R2 Standard x 64 virtual machine install in Hyper-v server and Install SCE management version 2010.
in sudden server stopped sending updated to client machine. So I check many and did many changed as per MS community forums. But still I have same issue.
Then I planned to install again SCE management server in different VM. But even though I am getting error that old SCE management server is existing in my domain. Therefore I am afraid to change or remove any setting in AD since I have short
of knowledge about SCE servers.
However my SCE server was working smoothly until 11-2013 and then suddenly stuck. When I check the server machine I found that local drive C: is getting full and SCE management is fail to start. So from that to now when ever I had free time I changed
many things. But unfortunately I couldn't get the sever back to normal.
Few changes which I made are below.
- Remove and reinstall WAUS several times
- Check online update and direct updated server SCE machine without getting updated from SCE
- Remove dotnet frame work and updated version 4
- product configuration wizard reconfigure
- Repair management agent in client machine.
Kindly help for me to repair my SCE server or make another installation without having change of settings.
It would be highly appreciated if you could resolve issue
The error massage is below in windows update log.
2015-02-11 11:37:46:747 904 c78 Misc =========== Logging initialized (build: 7.6.7600.320, tz: +0300) ===========
2015-02-11 11:37:46:747 904 c78 Misc = Process: C:\Windows\system32\svchost.exe
2015-02-11 11:37:46:747 904 c78 Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-11 11:37:46:747 904 c78 Service *************
2015-02-11 11:37:46:747 904 c78 Service ** START ** Service: Service startup
2015-02-11 11:37:46:747 904 c78 Service *********
2015-02-11 11:37:46:750 904 c78 Agent * WU client version 7.6.7600.320
2015-02-11 11:37:46:750 904 c78 Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-11 11:37:46:750 904 c78 Agent * Access type: No proxy
2015-02-11 11:37:46:751 904 c78 Agent * Network state: Connected
2015-02-11 11:37:58:940 904 8a0 Report CWERReporter::Init succeeded
2015-02-11 11:37:58:940 904 8a0 Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-11 11:37:58:941 904 8a0 Agent * Prerequisite roots succeeded.
2015-02-11 11:37:58:941 904 8a0 Agent *********** Agent: Initializing global settings cache ***********
2015-02-11 11:37:58:941 904 8a0 Agent * WSUS server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:58:941 904 8a0 Agent * WSUS status server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:58:941 904 8a0 Agent * Target group: (Unassigned Computers)
2015-02-11 11:37:58:941 904 8a0 Agent * Windows Update access disabled: No
2015-02-11 11:37:59:068 904 8a0 DnldMgr Download manager restoring 0 downloads
2015-02-11 11:37:59:081 904 8a0 AU ########### AU: Initializing Automatic Updates ###########
2015-02-11 11:37:59:082 904 8a0 AU # WSUS server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:59:082 904 8a0 AU # Detection frequency: 22
2015-02-11 11:37:59:082 904 8a0 AU # Approval type: Pre-install notify (Policy)
2015-02-11 11:37:59:082 904 8a0 AU # Auto-install minor updates: No (User preference)
2015-02-11 11:37:59:082 904 8a0 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-11 11:37:59:082 904 8a0 AU # Will display featured software notifications (User preference)
2015-02-11 11:37:59:301 904 c78 Report *********** Report: Initializing static reporting data ***********
2015-02-11 11:37:59:301 904 c78 Report * OS Version = 6.1.7601.1.0.196880
2015-02-11 11:37:59:301 904 c78 Report * OS Product Type = 0x00000007
2015-02-11 11:37:59:313 904 c78 Report * Computer Brand = Microsoft Corporation
2015-02-11 11:37:59:313 904 c78 Report * Computer Model = Virtual Machine
2015-02-11 11:37:59:316 904 c78 Report * Bios Revision = 090004
2015-02-11 11:37:59:316 904 c78 Report * Bios Name = BIOS Date: 03/19/09 22:51:32 Ver: 09.00.04
2015-02-11 11:37:59:316 904 c78 Report * Bios Release Date = 2009-03-19T00:00:00
2015-02-11 11:37:59:316 904 c78 Report * Locale ID = 1033
2015-02-11 11:37:59:352 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:352 904 8a0 AU Initializing featured updates
2015-02-11 11:37:59:352 904 8a0 AU Found 0 cached featured updates
2015-02-11 11:37:59:352 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:353 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:354 904 8a0 AU AU finished delayed initialization
2015-02-11 11:37:59:354 904 c78 AU #############
2015-02-11 11:37:59:354 904 c78 AU ## START ## AU: Search for updates
2015-02-11 11:37:59:354 904 c78 AU #########
2015-02-11 11:37:59:356 904 c78 AU <<## SUBMITTED ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:01:818 904 8a0 AU Triggering AU detection through DetectNow API
2015-02-11 11:38:01:818 904 8a0 AU Will do the detection after current detection completes
2015-02-11 11:38:03:808 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:03:808 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:03:808 904 1de0 Misc FATAL: SOAP/WinHttp - SendRequest: SendRequestUsingProxy failed. error 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT + Last proxy send request failed with hr = 0x80072EFD, HTTP status code = 0
2015-02-11 11:38:03:808 904 1de0 PT + Caller provided credentials = No
2015-02-11 11:38:03:808 904 1de0 PT + Impersonate flags = 0
2015-02-11 11:38:03:808 904 1de0 PT + Possible authorization schemes used =
2015-02-11 11:38:03:808 904 1de0 PT WARNING: GetConfig failure, error = 0x80072EFD, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-11 11:38:03:808 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: GetConfig_WithRecovery failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: RefreshConfig failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: RefreshPTState failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 Report WARNING: Reporter failed to upload events with hr = 80072efd.
2015-02-11 11:38:08:092 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:08:092 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:08:092 904 1de0 Misc FATAL: SOAP/WinHttp - SendRequest: SendRequestUsingProxy failed. error 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT + Last proxy send request failed with hr = 0x80072EFD, HTTP status code = 0
2015-02-11 11:38:08:092 904 1de0 PT + Caller provided credentials = No
2015-02-11 11:38:08:092 904 1de0 PT + Impersonate flags = 0
2015-02-11 11:38:08:092 904 1de0 PT + Possible authorization schemes used =
2015-02-11 11:38:08:092 904 1de0 PT WARNING: GetConfig failure, error = 0x80072EFD, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-11 11:38:08:092 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: GetConfig_WithRecovery failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: RefreshConfig failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: RefreshPTState failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 Report WARNING: Reporter failed to upload events with hr = 80072efd.
2015-02-11 11:38:08:093 904 1de0 Report REPORT EVENT: {62417852-380A-47BC-B153-8A8E0E198470} 2015-02-11 11:37:59:352+0300 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
2015-02-11 11:38:08:098 904 1de0 Report CWERReporter finishing event handling. (00000000)
2015-02-11 11:38:08:098 904 1de0 Agent *************
2015-02-11 11:38:08:098 904 1de0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:098 904 1de0 Agent *********
2015-02-11 11:38:08:098 904 1de0 Agent * Online = No; Ignore download priority = No
2015-02-11 11:38:08:098 904 1de0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-11 11:38:08:098 904 1de0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-11 11:38:08:098 904 1de0 Agent * Search Scope = {Machine}
2015-02-11 11:38:08:440 904 1de0 Agent * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
2015-02-11 11:38:08:441 904 1de0 Agent *********
2015-02-11 11:38:08:441 904 1de0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:441 904 1de0 Agent *************
2015-02-11 11:38:08:441 904 edc AU >>## RESUMED ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:08:441 904 edc AU # 0 updates detected
2015-02-11 11:38:08:441 904 edc AU #########
2015-02-11 11:38:08:441 904 edc AU ## END ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:08:441 904 edc AU #############
2015-02-11 11:38:08:441 904 edc AU Featured notifications is disabled.
2015-02-11 11:38:08:442 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:08:442 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:08:442 904 c78 AU #############
2015-02-11 11:38:08:442 904 c78 AU ## START ## AU: Search for updates
2015-02-11 11:38:08:442 904 c78 AU #########
2015-02-11 11:38:08:444 904 c78 AU <<## SUBMITTED ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:08:444 904 1de0 Agent *************
2015-02-11 11:38:08:444 904 1de0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:444 904 1de0 Agent *********
2015-02-11 11:38:08:444 904 1de0 Agent * Online = Yes; Ignore download priority = No
2015-02-11 11:38:08:444 904 1de0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-11 11:38:08:444 904 1de0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-11 11:38:08:444 904 1de0 Agent * Search Scope = {Machine}
2015-02-11 11:38:08:444 904 1de0 Setup Checking for agent SelfUpdate
2015-02-11 11:38:08:445 904 1de0 Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: DownloadFileInternal failed for http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab: error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Setup FATAL: DownloadCab failed, err = 0x80072EFD
2015-02-11 11:38:25:564 904 1de0 Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EFD
2015-02-11 11:38:25:564 904 1de0 Setup FATAL: SelfUpdate check failed, err = 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent * WARNING: Skipping scan, self-update check returned 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent * WARNING: Exit code = 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent *********
2015-02-11 11:38:25:565 904 1de0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:25:565 904 1de0 Agent *************
2015-02-11 11:38:25:565 904 1de0 Agent WARNING: WU client failed Searching for update with error 0x80072efd
2015-02-11 11:38:25:565 904 1de0 Report CWERReporter finishing event handling. (00000000)
2015-02-11 11:38:25:565 904 edc AU >>## RESUMED ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:25:566 904 edc AU # WARNING: Search callback failed, result = 0x80072EFD
2015-02-11 11:38:25:566 904 edc AU # WARNING: Failed to find updates with error code 80072EFD
2015-02-11 11:38:25:566 904 edc AU #########
2015-02-11 11:38:25:566 904 edc AU ## END ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:25:566 904 edc AU #############
2015-02-11 11:38:25:566 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:25:566 904 edc AU AU setting next detection timeout to 2015-02-11 13:38:25
2015-02-11 11:38:25:566 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:25:567 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:30:595 904 1de0 Report REPORT EVENT: {6470B8FE-1600-4F7B-807F-6031606ECC8B} 2015-02-11 11:38:25:564+0300 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80072efd SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80072efd.
2015-02-11 11:38:30:613 904 1de0 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-11 11:38:30:613 904 1de0 Report WER Report sent: 7.6.7600.320 0x80072efd D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2015-02-11 11:38:30:613 904 1de0 Report CWERReporter finishing event handling. (00000000)

Can you try the below to reset the authorization and force a connection back from one of the win 7 machines:
it should help pinpoint exact issues.
1. Record the system time.
2. Reboot the system (or restart the Windows Update service).
3. After reboot run the command wuauclt
/resetauthorization /detectnow.
4. Wait 30 minutes.
5. Post the entries from the WindowsUpdate.log starting at the time recorded in Step #1.
Do you have any Windows 7 machines that are reporting? Are other machines with different operating systems reporting correctly?

WSUS Windows 7 Client not connecting with WSUS SERVER 2012 R2 Error " 80072ee2"

Hi ,
I Have the Non- AD WSUS server 2012 R2 as WSUS server, and widnows 7 ent sp1 as WSUS Client , the server and client are in teh same ip range and able to ping both server from client and client from server, and both are in teh
same time zone(EST), But im getting the "80072ee2" when ever i tried to get the updates from client
Please help me on this
Thanks
Balaji K

Record the system time of the Windows 7 client.
Reboot the Windows 7 client.
Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
Wait =30= minutes.
Post the entries from the WindowsUpdate.log starting at the time recorded in Step #1.
I have noted the time at 12:06 am and reboot the machine. and at 12:27 i have Run this command from a
command prompt: wuauclt /resetauthorization /detectnow. and taken the the logs from 11 am to 1 pm
2015-02-03 12:15:26:002
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:15:26:002
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:15:26:002
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:15:26:002
956 f84
PT + Caller provided credentials = No
2015-02-03 12:15:26:002
956 f84
PT + Impersonate flags = 0
2015-02-03 12:15:26:002
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:15:26:002
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:15:26:002
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:27:05:651
956 ca8
AU Triggering AU detection through DetectNow API
2015-02-03 12:27:05:651
956 ca8
AU Triggering Online detection (non-interactive)
2015-02-03 12:27:05:652
956 930
AU #############
2015-02-03 12:27:05:652
956 930
AU ## START ## AU: Search for updates
2015-02-03 12:27:05:652
956 930
AU #########
2015-02-03 12:27:05:654
956 930
AU <<## SUBMITTED ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:27:05:654
956 f84
Agent *************
2015-02-03 12:27:05:654
956 f84
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-03 12:27:05:654
956 f84
Agent *********
2015-02-03 12:27:05:654
956 f84
Agent * Online = Yes; Ignore download priority = No
2015-02-03 12:27:05:654
956 f84
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-03 12:27:05:654
956 f84
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-03 12:27:05:654
956 f84
Agent * Search Scope = {Machine}
2015-02-03 12:27:05:678
956 f84
Setup Checking for agent SelfUpdate
2015-02-03 12:27:05:678
956 f84
Setup Client version: Core: 7.5.7601.17514 Aux: 7.5.7601.17514
2015-02-03 12:27:29:233
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:27:29:233
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:27:29:233
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:27:52:795
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:27:52:795
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:27:52:795
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:16:363
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:28:16:363
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:39:920
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:28:39:920
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:28:39:920
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: DownloadFileInternal failed for http://135.155.61.172:8530/selfupdate/wuident.cab: error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EE2
2015-02-03 12:28:39:921
956 f84
Setup FATAL: SelfUpdate check failed, err = 0x80072EE2
2015-02-03 12:28:39:922
956 f84
Agent * WARNING: Skipping scan, self-update check returned 0x80072EE2
2015-02-03 12:28:39:923
956 f84
Agent * WARNING: Exit code = 0x80072EE2
2015-02-03 12:28:39:923
956 f84
Agent *********
2015-02-03 12:28:39:923
956 f84
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-03 12:28:39:923
956 f84
Agent *************
2015-02-03 12:28:39:923
956 f84
Agent WARNING: WU client failed Searching for update with error 0x80072ee2
2015-02-03 12:28:39:924
956 fec
AU >>## RESUMED ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:28:39:924
956 fec
AU # WARNING: Search callback failed, result = 0x80072EE2
2015-02-03 12:28:39:924
956 fec
AU # WARNING: Failed to find updates with error code 80072EE2
2015-02-03 12:28:39:924
956 fec
AU #########
2015-02-03 12:28:39:924
956 fec
AU ## END ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:28:39:924
956 fec
AU #############
2015-02-03 12:28:39:925
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:28:39:925
956 fec
AU AU setting next detection timeout to 2015-02-03 21:23:35
2015-02-03 12:28:39:926
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:28:39:928
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:29:03:495
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:29:03:495
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:29:03:496
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:29:03:496
956 f84
PT + Caller provided credentials = No
2015-02-03 12:29:03:496
956 f84
PT + Impersonate flags = 0
2015-02-03 12:29:03:496
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:29:03:496
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:29:03:496
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:29:03:496
956 f84
Report REPORT EVENT: {B6636CDB-B0BF-4CDE-BEB3-D49C1CEC258F}
2015-02-03 12:28:39:921-0800 1
148 101
{D67661EB-2423-451D-BF5D-13199E37DF28}
1 80072ee2
SelfUpdate Failure
Software Synchronization Windows Update Client failed to detect with error 0x80072ee2.
2015-02-03 12:29:03:510
956 f84
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-03 12:29:03:510
956 f84
Report WER Report sent: 7.5.7601.17514 0x80072ee2 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2015-02-03 12:29:03:510
956 f84
Report CWERReporter finishing event handling. (00000000)
2015-02-03 12:29:27:075
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:29:27:075
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:29:27:075
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:29:27:075
956 f84
PT + Caller provided credentials = No
2015-02-03 12:29:27:075
956 f84
PT + Impersonate flags = 0
2015-02-03 12:29:27:075
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:29:27:075
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:29:27:075
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:53:05:793
956 930
AU AU received policy change subscription event
2015-02-03 12:58:26:707
956 8fc
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:58:26:707
956 8fc
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:58:26:708
956 8fc
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:58:26:708
956 8fc
PT + Caller provided credentials = No
2015-02-03 12:58:26:708
956 8fc
PT + Impersonate flags = 0
2015-02-03 12:58:26:708
956 8fc
PT + Possible authorization schemes used =
2015-02-03 12:58:26:708
956 8fc
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:58:26:708
956 8fc
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
Report WARNING: Reporter failed to upload events with hr = 80072ee2.

How to get update KB3008273 on my 2012R2 WSUS Server

I am not sure if this is a WSUS issue or not, I can not find
KB3008273 on my WSUS server and I have the Windows 8 updates selected, I also tried to download it from the
Windows Update Catalog and it is not available on that site either.
I looked at the article Description of Software Update Services and Windows Server Update Services changes in content for 2014
which appears to indicate that it should be available for download to WSUS
Is this an update that is only available directly from Microsoft Update?
Thanks
Bruce

I do have the Windows 8 and 8.1 categories selected and the Updates classification as per the pictures below.
My objective was to try and update my 8.0 systems to 8.1 using my WSUS server, but in testing using a VM, I found that even if I applies the missing KB3008273 update directly from Windows Update I still had to go to the Microsoft Store to get the update
package to do the actual 8 to 8.1 update. If there is some other way to accomplish this task I would be interested. I do not have a Volume License agreement with Microsoft so this appears to be my only option to get these system up to 8.1 without
purchasing new licenses!
Thanks
Bruce H.
Bruce H.

Hot fix not applied to WSUS server

I am running windows 2008 SP2 with WSUS 3.0 sp2. I have tried to apply several hotfixes and I reboot and look at the help page and I am still on Version: 3.2.7600.226. No matter what KB I apply this never changes. So it is not detecting
my windows 8 machines correctly. How do I get the hotfixes applied. I click on install on them and they say updating and then it says successfully finished but the version number never changes. Any help would be appreciated.

and I reboot and look at the help page and I am still on Version: 3.2.7600.226.
The problem is that you're looking at the help page. This is a long-standing bug in the Microsoft Management Console (MMC) that does not update the About->Help of the base product when patched.
The authoritative source for the current build of a WSUS server is on the Details Pane of the root node of the console, in the lower right corner where it identifies the current "Server Version".
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Scalability Test: parallel requests not matching between app server and db.

We have an environment where we have started doing some load testing on our weblogic 11g instance.
The current flow and configuration is the following:
There are https requests that go into a servlet, which then calls a local EJB which uses a connection pool to request data that is returned to the caller.
The following diagram shows the general flow w/ pool size limits:
(Socket Readers: 33%) --> Servlet --> Local EJB (initial 100, max 200) --> Connection pool (initial 400, max 400) --> Oracle RAC database
First thing worth pointing out is I know that the connection pool size is drastically larger than the ejb pool -- and this needs to be addressed.
During a scalability test, we saw that there were the following max stats on the system:
Max number of sockets to the app server was approximately 450, while the maximum number of connections used during the test was 122.
We did not have instrumentation on the ejb pool to see how much it grew, but I'm assuming that the limit was due to the pool being to small and not growing fast enough.
what are people's thoughts on what to measure and test. We are trying to get a baseline configuration before jumping to a cluster environment.
Is there recommendations in terms of industry standards for matching the socket readers, thread pool, ejb pool and connection pool for a system? General recommendation read so far indicate that inital and max should be set to the same values?
Any recommend literature is appreciated.
Thank you.

Another measurement point that was captured is the max number of threads (LWPs) on the server went up to 196 (then dropped to 179 and stabalized there)
Any help is definitely appreciated.

Testing updates with a new WSUS server

We recently created a new WSUS server and added a test target group consisting of 6 test PCs. My question is if I approve updates tonight to just the target group, will I be able to push out those same updates to our staff PCs next Thursday? (We typically
approve updates on the 4th Thursday of the month for a 3:00am Friday install via our WSUS GPO.) Or will the staff PCs miss out on this month's updates due to the test push? I.e.: is it "one and done" with the approved updates.
Thanks
Hank Vare

A couple of thoughts to share....
First, with respect to your approvals. This is exactly why target groups exist. So if today (Thursday) you approve updates for the target group, then the computers in that target group will get these updates sometime over the next 24-48 hours (depending
on a lot of variables that affect the process from the time of approval to the time of installation). When you're ready to deploy them to more systems, you just ADD the approvals for the extra target group(s) that contain the additional systems.
Second... approving updates on Thursday for a 3am Friday installation is a procedure likely doomed to some percentage of failure. In fact, if you've already been doing this I'm surprised it hasn't already happened. So let's dive into some of those "variables"
I mentioned in the first paragraph and better understand the risks.
When you approve the updates, they have to be downloaded from Microsoft. That takes some amount of time.
AFTER the updates are downloaded from Microsoft, the client has to "check in" with the WSUS Server to see if there are any new/available updates to download. That "check in" could occur at anytime up to 22 hours AFTER the updates have
been downloaded (which, right here, already blows the 3am target).
When the client has discovered available update to download, then it actually has to download them AND the download has to complete before 3am Friday, or those updates will not be scheduled for installation at your weekly event.
NOW.. having said that, introducing a TEST GROUP may actually mitigate some of that risk -- unless your test group is also scheduled to install updates ONLY on Friday at 3am, in which case, some of your test group might not get any updates at all.
As a general rule, your initial approval of an update should be at least 48 hours in advance of the time in which you want the clients to actually install the updates. This gives the WSUS server several hours to download the updates, it accounts for the
up-to-22-hours that may lapse before the client discovers the updates as available, and it gives the client several hours to download the updates from the WSUS server, so they are on the local machine prior to the scheduled installation time.
Additionally, if there are downstream/replica servers involved in the environment, you'll need to add another 48 hours for each level of replication -- because replica servers get updates exactly like clients do.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

WSUS "Self-update is not working" after new certificate

After creating a new self-signed certificate in SBS 2008 wizard we get the following error:
Text: Self-update is not working
Source: Windows Server Update Service
Event id: 13042
I know that it must be something simple. But I can not find the solution.
Can anyone help me with this problem?
Thanks

Hi,
Based on your description and this error message, this issue may be caused by:
The Default Web Site is not running and/or has a site binding for SSL (HTTPS).
The Selfupdate virtual directory has the "Require SSL" checked under the SSL settings.
For more details, please refer to the following KB and check if can help you to solve this issue.
WSUS 3.0 Self-update is not working on Windows Small Business
Server and Event ID 13042 is generated
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Export Approuved Update from old server WSUS to the new WSUS server

Hello,
I want to export all update approuved from one old WSUS server to one new WSUS server
Can you help me please ?
Best Regard

Hi,
>>I want to export all update approuved from one old WSUS server to one new WSUS server ?
There are three steps to exporting and then importing updates:
Make sure that the options for express installation files and update languages on the exporting server are compatible with the settings on the importing server. This ensures that you collect the updates you intend to distribute.
Copy updates from the file system of the export server to the file system of the import server.
Export update metadata from the database on the export server, and import it into the database on the import server. The last section explains how to import exported updates to a replica server
Here is the official solution:
https://technet.microsoft.com/en-us/library/cc720486(v=ws.10).aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cache not synchronized between portal nodes

Hello.
We are having a problem with a service using a cache api (com.sapportals.wcm.util.cache.ICache from bc.sf.service.cache_api.jar). The problem is fairly hard to describe, so bear with me (long description)
Environment (+applications) description:
The portal we have is composed of 4 nodes (2 machines with 2 server nodes each, running ep6 sp2). We are using a service as described above, that basically parses a folder structure from the km repository and puts it into an object and the object into the cache. The objects are modified whenever the folder structure is modified (we have an event listener on a specific folder). Let's call this serviceApp. We have then another application that uses the cached object to display a tree in an iView. Let's call this iViewApp.
Problem description:
Whenever the folder in the km folders is modified, the cached object is modified by the serviceApp. If you are accessing the portal on -say- node1, then the cached object is immediately available to iViewApp. But if you access then the portal from -say- node2 and open the iViewApp, the updated object is not available (an older "version" of the cached object is displayed). The cached object is updated only if modifications in the km folder are performed on node2 (and hence the service instance from node2 rebuild the cached object). So: on node1 the cached object is updated. On node2 it is NOT updated. Also, the modifications performed in the km folders on nodeX are immediately available on nodeX but not on the other nodes (only after some time they become available). Also, modifying km folders on nodeX raises an event (caught by the handler running on nodeX but NOT by the handlers on other nodes). <i>(***)</i> When the modifications in km folders become available on the other nodes (due to synchronization, I reckon), the event handlers do not react (hence, we think an event is not raised).
Question no1:
We have come to the conclusion that maybe the problem is that the caching memory zone is not synchronized between the server nodes. Any ideas how to fix this?
Question no2:
Which api is better to use for caching? The ICache from the bc.sf.service.cache_api.jar or the ICacheService from com.sap.portal.compatibility50.cacheapi.jar? Or maybe another one (we only know of these 2)?
Question no3:
Is the <i>(***)</i> conclusion correct?
Thank you. Sorry again for the long post.

Hi Silviu,
We are facing the same problem with the cached objects across nodes. Would you share any information/solution to resolve this ?
Regards,
Melwyn

Upstream WSUS Server and Sync

Hello,
Environment : 1. Server 2008 R2 Main Upstream server, hosts update content locally, SQL DB on another system.
2. 2 - Server 2008 R2 downstream servers, host update and sql content locally.
We had our Main Upstream WSUS server crash after applying KB2734608-x64 on a Server 2008 R2 box. Our database resides on a different SQL server on the same domain. When we tried to launch the WSUS interface the mmc console
it would crash. ( MMC has detected an error in a snap in and will unload it. was the error). Looked at the logs and it seems like it could not connect to the database. Anyways after trying many fixes, i decided to re-install WSUS until it got to the point
where it would not allow me to re-install got errors in the log of " InstallWsus: MWUS installation failed ( error 0x80070643: fatal error during installation with other ones like CInstallDriver and CSetupDriver:.....blah blah). I was messing with the
back end database and accidentally deleted it, so i had to restore the latest backup from a month ago ( we typically back on a weekly basis with incrementals, but our backups where failing and we didn't know of this because of a complicated situation
with our client..anyways). My question is once i get the WSUS connected backup what can i expect from the downstream servers in terms of Synchronization? I am assuming initially we will have re approve all updates on the upstream server, before the downstream
server successfully sync? I know i have to recycle the WSUS application pool and reset the update content, anything else? Also any advice on installing that patch? We initially tried to install it because some clients were not reporting into the console properly.
( I know we are on a downward spiral here, any help is appreciated. Will probably end up rebuilding the VM from scratch re-installing WSUS )
Server 2008 - MCITP, Server 2012 - MCSA

Because you had previously attempted the installation of KB2734608 on the WSUS server, it's likely that the database schema has already been modified, making it impossible to connect a downlevel WSUS server to that database. It's unfortunate that you uninstalled
WSUS (probably not necessary and notably complicates the situation), but c'est la vie.
Of course, apparently all that is also irrelevant since you also trashed the back-end database and restored it, so now that database does not have the schema mods imposed by KB2734608.
So, once you get this new WSUS server installed to the restored database, the downstream servers (where I presume you have not yet installed KB2734608 since this update must be installed from the top down) will just keep on truckin'. The only updates you'll
need to approve are the ones that were approved since the last database backup (which hopefully was after you approved this month's Patch Tuesday updates, otherwise you'll likely have a fair amount of work to be done).
Successful synchronization is not a function of the state of the approvals on the upstream server, but if there are any updates NotApproved on the upstream server that were previously approved, a replica server will lose those approvals and client systems
won't get the update until it is (re)approved, the replica resynchronized, and the client performs another detection to (re)find that (new) approval.
I don't know where the "recycle the app pool and reset the update content" stuff is coming from. You're installing a new front-end WSUS server onto an existing database that's already functional. No other actions are required.
As regards successfully installing KB2734608, I suggest thoroughly reading the KB article for starters... TWICE!
First requirement of successfulling installing this update is having a healthy
WSUS server. Not sure why your particular installation failed (installation failures of KB2734608 are pretty rare, as opposed to those encountered by KB2720211), but they're almost always related to existing dysfunctions within the WSUS server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Content Transfer between WSUS and SCCM client on port 8530

Dear All
In my environment from last few days we are facing an strange situtaion where huge contents is getting transferred between WSUS server and SCCM client on port 8530.
I check logs on client and found that client are getting contents from their associated DP's but still weekly network utlisation report showing that data in GB's was transferred between SCCM primary server and clients on port 8530.
Kindly suggest what else need to check in this scenario
Regards Suresh

The only other possible traffic from WSUS is actual updates if and only if you have been approving updates directly in WSUS which you should not be doing.
Thus, assuming you are not doing what you should not be doing, the only possibility is the update catalog. 150-200MB sounds excessive but that will be based upon what you all have selected for your catalog. There are also a handful of reasons why a full
catalog resync would be initiated instead of just a delta.
Jason | http://blog.configmgrftw.com

How to view which updates were manually imported into WSUS

We need to manually install updates on a workstation that is not joined to our domain (in a workgroup) and match the updates that are normally installed via WSUS.
WSUS has some extra updates added that were downloaded from the Microsoft Catalog site.
How can I see which catalog updates are added to our WSUS server?

In that case, I don't know why I've never had the issue on my gazillions of Win7 deployments, and, this KB is therefore very misleading about Vista & later sysprep behaviour... :S
http://support.microsoft.com/kb/903262/en-au
Unless the master image had actually been patched with Windows Update or WSUS, the master image would never actually have a SusClientID. That's the reason most organizations avoid this situation.
I do not know why the article claims that sysprep was changed to clear this ID. It still does not do it, as evidenced by the thousands of threads in this forum directly related to this issue over the past seven years (since the release of Vista), most
of which involved just as many Windows 7 systems as they did Windows XP systems.
The 2nd and 3rd paragraph in the symptoms section is still the case:
This issue occurs if the computer was set up by using a Windows 2000 image, a Windows Server 2003 image, or a Windows XP image in which the registry value for SusClientID is populated before it is deployed to client computers.
When you use Sysprep to generalize an image for a virtual machine, or when you use a unique SID-generating technology to create the images,
the SusClientId registry value is not cleared if it is populated within the image before the image is deployed.
What's also relevant (and disappointing), and may have something to do with the claimed involvement of sysprep, is that the WUAgent v7.0 was supposed to have self-detecting capabilties for duplicated SusClientIDs. See the note in that section about "changes
it's SusClientID if the hardware changes". Sadly, it doesn't work. Also, there's no "hardware change" on virtual machines, so that's a non-starter from the get go. I can count on one hand the number of times I've seen a WindowsUpdate.log where the WUAgent
correctly detected a duplicate SusClientID and spontaneously generated a new one.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

Host update information not same between WSUS server(Up/Downstream)

Similar Messages

Maybe you are looking for