Hot deployment using the REDEPLOY feature

Hi
I am rather confused regarding the usage of the HOT DEPLOYMENT in WLS 6.1 sp2
- Win2000.
According to the documentation - "deployment.pdf" p. 31 you should be able to
simply touch the REDEPLOY file and the entire application should then be redeployed
by WLS. However according to the following link:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=2095
the usage of the REDEPLOY feature is only for WebApp's not EJB's.
So my question in short terms: What am I supposed to belive ? the BEA documentation
or the BEA support team ?
I have tried using the REDEPLOY feature as suggested by the documentation however
the WLS fails to do the redeployment with an execption.
Kind regards
Jorgen Fastrup

From my experience REDEPLOY does work for EJBs as well. You need to meet two conditions: REDEPLOY file should be in META-INF and your application should be deployed under the domain/application. I was not able to get it to work when the application is deployed elsewhere. If somebody knows how to it, please let me know.
Alexander.

Similar Messages

How do I use the OCR feature in Acrobat 9?

Does Acrobat 9 have the OCR feature? If so, where do I find it? In Acrobat 8, one would go to Document, OCR Text Recognition, Recognize Test Using OCR, OK. I specifically want to know how to apply OCR to a scanned document in order to use the Find feature.

Simple. go to DOCUMENT, and then select OCR TEXT RECOGNITION.

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S, HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S

HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S?

There is no current panorama feature. When iOS 6 is released (Sept. 19) we will find out.

Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

Hi everyone,
I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
on different physical disks to have them not slow-down each other in case of intensive disk accesses.
So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
Thanks in advance.
Cheers,
Sebastian

Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform. Lastly, you could copy the vhd file to a different location
before starting the VM.
.:|:.:|:. tim
Hi Tim,
thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
2x physical machines carrying severel HDDs
8+ VMs spread to run on the 2x servers
when setting up replication I can only set the storage-location from server A on B and vice versa B on A
Thanks again for your reply.
Cheers,
Sebastian

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

The connection of the phone to the monitor would allow you to see, but does not have the ability to translate the touch on the monitor to the phone through that cable.

I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that I originally registered my computer with apple, I subsequently changed my e-mail address. Have since upgraded the e-mail addre

I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct. Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in. It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me. Any assistance would be much appreciated, Thanks

Hi rbcjoker76, and a warm welcome to the forums!
Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
Required Fonts from 10.3, much the same in 10.4...
http://support.apple.com/kb/HT2444?viewlocale=en_US
You may have to get Pacifist...
http://www.charlessoft.com/
then intall the Fonts what you need from your Install Disk.
Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

In version 4.0 I can't use the pinch feature on my trackpad to zoom in and out. Is there a setting in Firefox for this?

I installed v4.0 of Firefox and can no longer use the pinch feature on the trackpad of my MacBook. It seems to work OK in Safart and I'm wondering if there is a setting in Firefox to enable me to use that feature. The way the feature works is that you pinch your thumb & forefinger together or spread them apart to zoom in and out.

Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in cmd_fullZoomReduce
browser.gesture.pinch.in.shift cmd_fullZoomReset
browser.gesture.pinch.out cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift cmd_fullZoomReset

I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one. Are there any aftermarket devices for USB to phone that would work in this case?

I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

Bought elements 10 last month and can't use the edit feature.

So I got elements 10 with a Wacom Bamboo Capture around April 23rd last month. I created a new adobe id and signed in. It asked me to update my account and add my birthday, personal URL for photoshop, and agree to the terms. Everytime I've tried to do this during the past few weeks I always get an error/failure message. I acknowledge that photoshop is moving to revel and that's probably the reason why I can't complete my sign in. I've already asked adobe with a live chat and they suggested I come here to the forums. Is there any way to use the edit feature now? ele

Just don't use the welcome screen. If you use Windows, go into the program files or program files(x86) for 64-bit systems, find the actual .exe/application file for the editor, right click it and make a desktop shortcut and use that instead of the welcome screen to launch the editor. For macs, it's in applications>adobe photoshop elements 10>support files.

Why can't I use the landscape feature for iPhone 5? It only works in limited apps. I feel as though I wasted my money since I prefer to use my phone in landscape mode.

Why can't I use the landscape feature in all of the apps? It seems like a waste of money since I prefer to use the landscape feature.

It is up to the app developer to decide if the app should work in landscape mode or not. This is also true on Android phones, by the way.

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gon

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?

Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.

HT4356 Fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

I have developed a fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

Hi,
I had a similar problem and found help for it. Go to the "Advanced" menu and select Extend features in Adobe Reader. That will enable rights which may resolve your problem. If that doesn't work, there is a really helpful guy in here, Robert Levine. You may want to ask him directly.
Good Luck

Can i use the 'Record' feature in Applescript editor to automate bulk mail

Hi,
Is it possible to use the 'Record' feature of the Applescript editor to create a script that will automatically copy a website address into a new email message and then send that email message to everyone in my Friends category from the Address Book.
I want to do this because I want to alert my friends to changes on my website once a week, but I don't want to have to sit and type out the email and copy the website address and everything like that. So I was thinking I could do it with one click using Applescript.
Is that right and how dangerous is it. Like if i somehow manage to mess up the script can I just delete it and start again without causing any damage to my Mac
Thanks
Jason

JayTelford wrote:
Hi,
Is it possible to use the 'Record' feature of the Applescript editor to create a script that will automatically copy a website address into a new email message and then send that email message to everyone in my Friends category from the Address Book.
I want to do this because I want to alert my friends to changes on my website once a week, but I don't want to have to sit and type out the email and copy the website address and everything like that. So I was thinking I could do it with one click using Applescript.
Is that right and how dangerous is it. Like if i somehow manage to mess up the script can I just delete it and start again without causing any damage to my Mac
Thanks
Jason
Perhaps I should make myself more clear what I want to do.
I want to do the following.
1: Open Mail
2: Create a new email message
3: Set the recipients from my contact group "Friends" so that everyone in my my 'Friends" contact group will receive the email
4: Set the subject as: "Check out these great new updates to my site"
4: Set the body of the mail message as follows:
Hi There,
Thanks to you all for subscribing to these updates. Here are this weeks updates from Jason's Online Mag. [website address]
Regards
Jason Telford
http;//web.me.com/jasongtelford
5: Send the email
Am I correct in thinking that I will need to use Automator and schedule the automation to run a script as per a weekly iCal event.
If this is correct, then how would I do that. Can I use the 'Record' feature of Automator and the Applescript Editor, to create the automation and the script. I am new to doing this kind of thing so I am unsure of the procedure for accomplishing the task I described above automatically.
Also I should apologise for not making my original post clearer.
Regards
Jason
Message was edited by: JayTelford> Corrected a spelling error

Hot deployment using the REDEPLOY feature

Similar Messages

Maybe you are looking for