Hotmail fails to be added
Can anyone help with rectifying the problem I have with verifying my hotmail account on my IPad?
All was well until yesterday and without warning today I get an error message saying the password to
the account is wrong.
I deleted the account to readd but this has failed. I have upgraded the OS to 6 and tried to readd the hotmail account
but it has still failed to verify it.
Any suggestions?
Hi,
There are some issue rendering on Intel Mobile Series GPU in the Incubator build. It seems there is also some issues running with acceleration with other hardware too on Linux. One user found that setting context3D.enableErrorChecking = true in his tests remedied the problem (http://forums.adobe.com/thread/797994?tstart=0). If you happen to be writing any code for the MoleHill api, would you mind checking to see if this works?
If not then I will report back when we have fixed the issue and see if that allows you to run in hardware.
Thanks.
Similar Messages
-
I have used hotmail for ages on a previous iphone 3 & also on the iphone 4. Since yesterday it is failing to update. I know the pasword & account are correct but it states this is the problem.
The OS is 4.3.3 (8J2)
Is anyone else having a problem? Is there a fault at present? Any ideas to getting it back up & running as I rely on this to remotely collect emails?If you want a job done do it yourself I suppose....
There are many possible causes that I have seen to this problem.
What threw me off is that it occured so suddenly.
I have used a lot of networks. Usually WPA2. Since I got here... on this WEP network...
my mail stopped working for some bizarre reason.
The two error messages I kept REPEATEDLY getting were- "connection to server failed" and "password incorrect: enter the password for the"... blah.
I can't tell you for sure if time cured it but my solution was #4 on the following list
Common Solutions I found on the internet-
IF YOU ARE USING HOTMAIL ("@hotmail.com","@msn.com", or "@live.com")
Make sure your Email and Username are the same. BOTH should end in "@hotmail.com"
Be ultra-sure you are typing in the username and password right
"m.hotmail.com" for the server, SSL on.
Keep your password on the shorter side- UNDER 16 characters.
I tried several. I can vouch for up to 15 characters.
ALSO... as a side-note... caps are irrelevant in the email and username, just like on the computer.
IF YOU ARE USING GMAIL ("@gmail.com)
Something about a captcha code. Probably outdated. Worth reposting regardless for the sake of being thorough. -
Hello Guru,
I am trying to implement SSL for Essbase server on EPM 11.1.2.1, while I am trying to add essbase server in EAS console using SSL mode, it's giving "NZERROR: nzos_Handshake failed(29024)"
Still I am able to access Essbase in secured mode through MAXL.
Thanks and Regards
YashThis is what the error code means
NZE-29024: Certificate validation failure
Cause: The certificate sent by the other side could not be validated. This may occur if the certificate has expired, has been revoked, or is invalid for another reason.
Action: Check the certificate to determine whether it is valid. Obtain a new certificate, alert the sender that there certificate has failed, or resend.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hotmail failing on I-Pad 2 and I-Phone
Primary Hotmail account was hacked. Cleaned up the "rootkit virius". Created new stronger pass word for Hotmail. Now constant messages on the I-Pad and I-Phone--can't get, send or receive, need Apple ID. Put that in and then it wants the Hotmail pass word. Do that and the loop begins again.
Blowing out the Hotmail account on the I-Pad isn't the solution.
Any ideas?I did not. When I went into Hotmail on the desk top and could not get in Microsoft confirmed that "someone else is using your account", they asked for confirmation of where to send the new security code so I could change the pass word. I changed it and everything worked fine on all devices. Them four hours later it all got goofey again.
and hasn't worked since.
I'm flying this morning and will try your seggestion when I get back.
Thanks -
SWIM collection in Prime fails for newly added Cisco 3650 switch
Currently carrying out a refresh of my LAN devices moving to Cisco 3650 PS-S, when running SWIM from the software image management in Prime 2.1 I receive the following output:
Image collection from source
Collecting image with Protocol : SCP
Collecting image with Protocol : TFTP
FAILURE
FAILURE
FAILURE
SWIM_20002:Image Collection has not succeeded from device, Please check the status of the device or re-sync the Device from Device Work Center.
Invalid image import operation. Import operation not supported for [bootflash:packages.conf].
Invalid image import operation. Import operation not supported for [bootflash:packages.conf].
Is the 3650 not currently supported by Prime 2.1 for image collection?What is missing from the example is the fact that you need to create a Variable in the Manage Variable List for the $interfaceNameList object. Here is what I did:
Template Detail:
CLI Content:
#foreach ($interfaceName in $interfaceNameList)
interface $interfaceName
shutdown
exit
#end
Next hightlight the interfaceNameList name and then click on the Manage Variables icon (upper right corner of the dialog). This will create a new variable of type String called interfaceNameList. Edit this new variable and change it to:
Type: DB
Default Value: IntfName
Note: IntfName was retrieved from the list of predefined variables listed in /opt/CSCOlumos/conf/ifm/template/inventoryTagsInTemplate mentioned above. -
SetViewPosition() fails for newly added InternalFrame
greetings,
i have a hyperlink for an object.
clicking it opens up an internal frame centering the object.
i use the method
JViewport.setViewPosition(Point p)
i calculate point p such that the object appears at the center of the viewport.
problem: the method gets executed if the internal frame is already open.
otherwise it is not executed.
ie. when a hyperlink is clicked the node is centered if the internal frame is already open - otherwise it is not centered.
why does it happen? any help
thanks
venkatgreetings,
i have a hyperlink for an object.
clicking it opens up an internal frame centering the object.
i use the method
JViewport.setViewPosition(Point p)
i calculate point p such that the object appears at the center of the viewport.
problem: the method gets executed if the internal frame is already open.
otherwise it is not executed.
ie. when a hyperlink is clicked the node is centered if the internal frame is already open - otherwise it is not centered.
why does it happen? any help
thanks
venkat -
Hotmail stopped working on my iPhone after a few months!
Hi,
I upgraded my hotmail account to the premium membership to be able to use its pop service on my iphone and it worked fine for a few months. But suddenly it just stopped working a couple of weeks ago. I am not able to receive any new emails on the email service of my iPhone for my Hotmail account. All my other email services, yahoo and gmail, work fine on my iPhone apart from my Hotmail account which it just stopped two weeks ago and has not resumed working ever since.
Any one has any explanation or suggestion to resolve this issue.
ThanksI am having the same problem and I think I am making matters worse. I tried deleting the hotmail account and then added it again, but I'm not sure I have the settings right. Should I be setting up in IMAP, POP, or Exchange? Here is what I have done so far for my last attempt:
Deleted my Hotmail account.
Powered phone off and turned back on.
Went to Settings/Mail/Add Account/Other
IMAP is highlighted
Name/Address/Description is correct
Host Name: pop3.live.com
User Name: is correct
Password: is correct
Host Name: smpt.live.com
User Name: is correct
Password: is correct
Pressed SAVE (iphone shows "verifying IMAP account information")
Error message "*Cannot Connect Using SSL* Do you want to try setting up the account without SSL?"
Pressed YES (iphone shows "verifying IMAP account information")
Error message "*IMAP account verification failed* The IMAP server "pop3.live.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server" field."
Pressed OK
Now what or where do I go from here? My Yahoo account is working fine. -
I can access all my folders in hotmail when I log on from google but they don't show up and just the general mailbox. I don't want to have to logon to Google every time I want to check my Hotmail but I also need to be able to see all my subfolders that I created under the inbox. There are many time to do not wish to delete the message but at the same time I don't want to leave them in the inbox forever. I tried restarting my iPhone 4s which has the update seven-point whatever it is now and also went and try to create an exchange account where it did not let me do it. Any help or suggestions as welcome. If you could please send answer to my email at [email protected] I would really appreciate it and I probably will forget my password here to get back on again
Try deleting your hotmail account and then adding it back as an Outlook account instead of "other". It worked for me.
-
Dual Case Column names fail in select ORDER BY clause
This one is solved, but I thought someone might be able to explain why it happens.
I'm a newbie, since I just downloaded Oracel XE last night, and am trying it out.
I set up a trivial table with 4 text columns. As it happened, I used dual case for some of my column names, such as 'Nickname'.
When trying out the Query Builder, the Select statement failed whenever I added a sort.
After some head scratching and back-and-forth with the sample data base (HR), I finally renamed all the columns to upper case. (e.g. column 'Nickname' became 'NICKNAME'). Then it works.
Seems like a bug, but maybe it's just a feature. Here's the code generated by the Query Builder. As you can see, there are no quotes around the Table name or column names in the ORDER BY clause (and the dual case version of the column name works if I put the quotes in manually and run it with SQL command.) Seems quirky.
select "TEAMS"."NICKNAME" as "NICKNAME",
"TEAMS"."CITY" as "CITY",
"TEAMS"."DIVISION" as "DIVISION",
"TEAMS"."CONFERENCE" as "CONFERENCE"
from "TEAMS" "TEAMS"
order by TEAMS.NICKNAME ASCWelcome to forum. :)
Now, answering your question - no i don't think this is a bug.
It is your code - which create this bug.
Now, question is - what happen?
Just check your select and from clause. You put all the names are in double quote. When you put anything within double quotes - it become a case sensitive. So, the problem occurs there.
Let's see ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:01.11
satyaki>
satyaki>create table s_otn
2 (
3 id number(4)
4 );
Table created.
Elapsed: 00:00:02.14
satyaki>
satyaki>set lin 80
satyaki>
satyaki>desc s_otn;
Name Null? Type
ID NUMBER(4)
satyaki>
satyaki>desc S_OTN;
Name Null? Type
ID NUMBER(4)
satyaki>
satyaki>desc s_OtN;
Name Null? Type
ID NUMBER(4)
satyaki>
satyaki>drop table s_otn;
Table dropped.
Elapsed: 00:00:05.22
satyaki>
satyaki>
satyaki>create table "S_otn"
2 (
3 id number(4)
4 );
Table created.
Elapsed: 00:00:00.12
satyaki>
satyaki>
satyaki>desc S_otn;
ERROR:
ORA-04043: object S_otn does not exist
satyaki>
satyaki>desc S_OTN;
ERROR:
ORA-04043: object S_OTN does not exist
satyaki>
satyaki>desc s_otn;
ERROR:
ORA-04043: object s_otn does not exist
satyaki>
satyaki>desc "S_OTN";
ERROR:
ORA-04043: object "S_OTN" does not exist
satyaki>
satyaki>desc "S_otn";
Name Null? Type
ID NUMBER(4)
satyaki>Got me?
Regards.
Satyaki De. -
Request message mapping failed in QAS server
Hi ,
I've transported the Developed objects from DEV Server to QAS Server using CTS method , now when i m making any changes in the development system and re transporting it back to quality server , its showing one or the other error ,
In one case it shows "Request message mapping failed" just we added one filed and mapped it. The filed can be seen in the repository but in the moni it says this filed is missing even though it is working fine in development, but in quality , i dont know why this problem is coming
The scenario is jdbc -
> xi ---> proxy,
this problem is only is quality , in dev its working fine
pl help , i running short of time ,
rgds
mojibRavi,
In test tab , both in message mapping and configuration , its successful but still this error..
rgds
mojib -
Adding new column to production database
I have to add a new timestamp column, that defaults to the current date/time, to an existing production database. The table is large - 150M records. I am trying to understand the ramifications of adding a new column to a table this large that gets hit often, mostly with inserts and reads. The column does allow null values and I am not going back and populating existing records with a value. Basically, I am looking for some best practice guidelines - how to prepare, what to expect, what other processes should be followed along with this schema update.
Radiators wrote:
Thanks, I have not found any %TYPE or %ROWTYPE dependencies on the table I am altering. But at the same time I do not understand how these types of dependencies would invalidate packages. I wouldn't be breaking any %TYPE dependency because I am not dropping columns, only adding a new one. And according to documentation for %ROWTYPE - "If columns are later added to or dropped from the table, your code can keep working without changes." Can you point me to Oracle documentation that describes your concern in detail? Thanks.you can test it yourself
SQL> CREATE TABLE abc (c1 NUMBER);
Table created.
SQL> INSERT INTO abc
2 VALUES (99);
1 row created.
SQL> CREATE OR REPLACE PROCEDURE test_proc
2 AS
3 v abc%ROWTYPE;
4 BEGIN
5 SELECT c1
6 INTO v
7 FROM abc
8 WHERE ROWNUM = 1;
9 END;
10 /
Procedure created.
SQL> SELECT object_name, status
2 FROM user_objects
3 WHERE object_name = 'TEST_PROC';
OBJECT_NAME STATUS
TEST_PROC VALID
SQL> ALTER TABLE abc ADD (c2 VARCHAR2(10));
Table altered.
SQL> SELECT object_name, status
2 FROM user_objects
3 WHERE object_name = 'TEST_PROC';
OBJECT_NAME STATUS
TEST_PROC INVALID
SQL> you should also consider the chance that some where if people are using "select * into" using this table, which will fail since you added new column. i don't see any unusual performance bottlenecks by adding a new column. in case of the backups, yes the earlier backups will not have the column. if you restore it, you will see earlier table structure itself. i have one specific question. why are you not attempting this in development/test environment first? even if it is a simple insert, it's always important to do it in test environments before attempting on production db. one thing for sure i know is, after adding column, you will have to recompile all the invalid dependencies. i think, it's better if you attempt it in test db and come up with any issues you see rather than asking a general question where problematic scenarios are plenty and rarely unknown before hand. -
Adding dynamically columns to array field
hello..
I am trying to create a window class with an ArrayField. The number of
DataField s in the ArrayField s are known at run time.
I created an nonWindow class (say Row )with an attribute FirstCol of type
Textdata.
I created a window class and using the window editor i created a datafield
with
name FirstCol which matches with the row class attribute.
I made datafield into an arrayfield with properties, name = arfield and
type = array of Row
I created a datafield and named to TemplateField (used as a template for
adding
columns )
On click of a button,I am able to add any number of DataField at run time
to the ArrayField by any of the following two ways successfully.
1) <TemplateField>.Parent = <arfield>;
2)<arfield>.AddColumn(2,<TemplateField>);
But i am failing both in adding data pragmatically to the added column and
retrive data from the newly added field even after the field by the folling
way
<arfield>.children[2].Name='Column2';
U can assume that all fields that are going to be added at run time are used
to store string data.
Please inform me if any one knows about this.
Waiting for responance..
Ramesh kumar reddy
[email protected]
PSI Data Syatems Ltd,
Bangalore,
INDIA.hello..
I am trying to create a window class with an ArrayField. The number of
DataField s in the ArrayField s are known at run time.
I created an nonWindow class (say Row )with an attribute FirstCol of type
Textdata.
I created a window class and using the window editor i created a datafield
with
name FirstCol which matches with the row class attribute.
I made datafield into an arrayfield with properties, name = arfield and
type = array of Row
I created a datafield and named to TemplateField (used as a template for
adding
columns )
On click of a button,I am able to add any number of DataField at run time
to the ArrayField by any of the following two ways successfully.
1) <TemplateField>.Parent = <arfield>;
2)<arfield>.AddColumn(2,<TemplateField>);
But i am failing both in adding data pragmatically to the added column and
retrive data from the newly added field even after the field by the folling
way
<arfield>.children[2].Name='Column2';
U can assume that all fields that are going to be added at run time are used
to store string data.
Please inform me if any one knows about this.
Waiting for responance..
Ramesh kumar reddy
[email protected]
PSI Data Syatems Ltd,
Bangalore,
INDIA. -
Isync failing to sync with IBM WorkPad C3
iSync has started to fail. I think this first failed when I added a number of subscription calendars to iCal and ran out of memory on the Palm. I've now selected just the one calendar in iSync, but when I sync, iSync comes up with a window message saying that the iSync was cancelled - it wasn't!
I'm quite happy with the data on my g4 Powerbook and would be happy to load all this again, but even resetting the iSync history gives the same result.
The HotSync Log I get is as follows:
HotSync 3.2 started 1/8/06 23:01:47
Loading “Conflict Notifier”
Notifier 'Conduit Conflict Notifier' version 1.0.0
Notifier Conduit Conflict Notifier OK
Local Synchronization
Syncing via transport “keyserial-port - As fast as possible”
Found Palm user “David Wilkinson”
ROM Listing
FileName Version Type Creator Created Modified Flags
Address Book 0001 appl addr 03/01/00 03/01/00 0043
Calculator 0001 appl calc 03/01/00 03/01/00 0043
Date Book 0001 appl date 03/01/00 03/01/00 0043
Expense 0001 appl exps 03/01/00 03/01/00 0043
Launcher 0001 appl lnch 03/01/00 03/01/00 0043
Mail 0001 appl mail 03/01/00 03/01/00 0043
Memo Pad 0001 appl memo 03/01/00 03/01/00 0043
Preferences 0001 appl pref 03/01/00 03/01/00 0043
Security 0001 appl secr 03/01/00 03/01/00 0043
Setup 0001 appl setp 03/01/00 03/01/00 0043
HotSync 0006 appl sync 03/01/00 03/01/00 0043
To Do List 0001 appl todo 03/01/00 03/01/00 0043
BigHAL 0001 bhal psys 03/01/00 03/01/00 0003
DefConnectionDB 0000 dflt modm 04/29/99 04/29/99 0002
DefConnectionDBVSeries 0000 dflt modm 02/07/00 02/07/00 0002
IrDA Library 0007 exgl irda 03/01/00 03/01/00 0003
PADHTAL Library 0005 htal hpad 03/01/00 03/01/00 0003
NetSync 0007 htal htcp 03/01/00 03/01/00 0003
AMX 0005 krnl psys 03/01/00 03/01/00 0003
Net Library 0007 libr netl 03/01/00 03/01/00 0003
SerialLib 0002 libr swrp 03/01/00 03/01/00 0003
Loopback NetIF 0001 neti loop 03/01/00 03/01/00 0003
PPP NetIF 0007 neti ppp_ 03/01/00 03/01/00 0043
SLIP NetIF 0007 neti slip 03/01/00 03/01/00 0043
Address Book_enUS 0001 ovly addr 03/01/00 03/01/00 0003
Buttons_enUS 0001 ovly bttn 03/01/00 03/01/00 0003
Calculator_enUS 0001 ovly calc 03/01/00 03/01/00 0003
Date Book_enUS 0001 ovly date 03/01/00 03/01/00 0003
Digitizer_enUS 0001 ovly digi 03/01/00 03/01/00 0003
Expense_enUS 0001 ovly exps 03/01/00 03/01/00 0003
Formats_enUS 0001 ovly frmt 03/01/00 03/01/00 0003
General_enUS 0001 ovly gnrl 03/01/00 03/01/00 0003
IrComm Serial Driver_enUS 0001 ovly ircm 03/01/00 03/01/00 0003
Launcher_enUS 0001 ovly lnch 03/01/00 03/01/00 0003
Mail_enUS 0001 ovly mail 03/01/00 03/01/00 0003
Memo Pad_enUS 0001 ovly memo 03/01/00 03/01/00 0003
Connection_enUS 0005 ovly modm 03/01/00 03/01/00 0003
Network_enUS 0006 ovly netw 03/01/00 03/01/00 0003
Owner_enUS 0001 ovly ownr 03/01/00 03/01/00 0003
PPP NetIF_enUS 0007 ovly ppp_ 03/01/00 03/01/00 0003
Preferences_enUS 0001 ovly pref 03/01/00 03/01/00 0003
Palm OS Data_enUS 0001 ovly psys 03/01/00 03/01/00 0003
System_enUS 0001 ovly psys 03/01/00 03/01/00 0003
Security_enUS 0001 ovly secr 03/01/00 03/01/00 0003
Setup_enUS 0001 ovly setp 03/01/00 03/01/00 0003
ShortCuts_enUS 0001 ovly shct 03/01/00 03/01/00 0003
SLIP NetIF_enUS 0007 ovly slip 03/01/00 03/01/00 0003
HotSync_enUS 0006 ovly sync 03/01/00 03/01/00 0003
To Do List_enUS 0001 ovly todo 03/01/00 03/01/00 0003
68328EZ Serial Driver_enUS 0001 ovly u8EZ 03/01/00 03/01/00 0003
Buttons 0001 panl bttn 03/01/00 03/01/00 0043
Digitizer 0001 panl digi 03/01/00 03/01/00 0043
Formats 0001 panl frmt 03/01/00 03/01/00 0043
General 0001 panl gnrl 03/01/00 03/01/00 0043
Connection 0005 panl modm 03/01/00 03/01/00 0043
Network 0006 panl netw 03/01/00 03/01/00 0043
Owner 0001 panl ownr 03/01/00 03/01/00 0043
ShortCuts 0001 panl shct 03/01/00 03/01/00 0043
System 0001 rsrc psys 03/01/00 03/01/00 0043
Cmd-nettrace 0001 sdio nett 03/01/00 03/01/00 0003
Cmd-ping 0001 sdio ping 03/01/00 03/01/00 0003
68328EZ Serial Driver 0001 sdrv u8EZ 03/01/00 03/01/00 0043
Palm OS Data 0001 spls psys 03/01/00 03/01/00 0043
UIAppShell 0001 uish psys 03/01/00 03/01/00 0003
IrComm Serial Driver 0001 vdrv ircm 03/01/00 03/01/00 0043
RAM Listing
FileName Version Type Creator Created Modified Flags
ORCache 0000 Cach oRem 07/20/06 07/20/06 0000
BGDB 0000 DATA BGDB 07/02/06 07/02/06 0009
DocsToGoDB 0300 DATA DTGP 06/30/03 06/25/06 0000
SyncAddressDB 0000 DATA addr 10/04/02 04/08/05 0008
AddressDB 0000 DATA addr 10/04/02 08/01/06 0008
SyncDatebookDB 0000 DATA date 10/04/02 08/01/06 0008
ExpenseDB 0000 DATA exps 10/04/02 11/08/05 0008
LauncherDB 0002 DATA lnch 10/04/02 10/04/02 0008
MailDB 0000 DATA mail 05/17/04 05/17/04 0008
MemoDB 0000 DATA memo 12/09/99 08/01/06 0008
ConnectionDB 0000 DATA modm 10/04/02 10/04/02 0008
NetworkDB 0000 DATA netw 10/04/02 09/07/05 0008
SolitaireFreeData 0000 DATA sW03 03/25/05 04/14/05 0008
SMSCDB 0000 DATA smsc 04/16/05 04/16/05 0008
ToDoDB 0000 DATA todo 10/18/99 07/21/06 0008
WTG5Clipboard.pdb 0000 DCLP DTGP 11/23/05 12/13/05 0000
SMS-Archiv 0001 Data SMSA 11/10/05 02/20/06 0008
OmniRemote 0000 Data oRem 10/15/32 07/21/06 0008
WordToGoFonts 0000 Font DTGF 11/10/05 11/10/05 0048
English_Br.lex 0001 LxLb LexF 11/08/05 11/08/05 0008
TBSW0 0000 MSDB TBSW 04/17/05 04/19/05 0000
Shopping List.doc.PDB 0000 RCH1 DTGP 01/08/06 01/08/06 0000
- Getting Started Tips - 0001 RCH1 DTGP 03/31/05 03/31/05 0008
TBSW01 0000 SCDB TBSW 04/17/05 04/20/05 0000
oatmeal.PDB 0003 STG1 DTGP 01/02/06 06/25/06 0000
Flour and cereal prices.xls.PDB 0003 STG1 DTGP 01/02/06 01/02/06 0000
DxtgTempDB 0000 TDAT DTGP 11/08/05 11/08/05 0000
SolFree_Undo 0000 Undo sWSF 04/24/05 08/01/06 0000
BeepMaker 0000 appl BMKR 04/15/05 04/15/05 0009
dbScan 0001 appl CESS 05/14/04 05/14/04 0009
Converter 0000 appl CNvt 11/12/02 11/12/02 0009
Dial! 0001 appl DIAL 04/16/05 04/16/05 0009
SheetToGo 1778 appl DTGB 11/08/05 11/08/05 0109
DocsToGo 1778 appl DTGP 11/08/05 11/08/05 0049
WordView+ 1778 appl DTGR 11/10/05 11/10/05 0109
Filez 0001 appl Filz 07/17/03 07/17/03 0009
Metronome 0001 appl MNRC 04/15/05 04/15/05 0009
WP_P2P 1777 appl WP2P 11/10/05 11/10/05 0149
Graffiti 0001 appl gdem 03/01/00 03/01/00 0001
Remote 0001 appl oRem 07/20/06 07/20/06 0009
SolFree 01AE appl sWSF 04/22/05 04/22/05 0009
AddressCitiesDB 0000 city addr 10/04/02 04/19/04 0108
CitiesDB 0000 city exps 10/04/02 10/04/02 0008
AddressCompaniesDB 0000 cmpy addr 10/04/02 10/06/04 0108
AddressCountriesDB 0000 cnty addr 10/04/02 10/04/02 0108
AuthenticationMgr 0001 libr DGGA 12/21/05 12/21/05 0049
EncryptionMgr 0001 libr DGGE 12/21/05 12/21/05 0049
GraphicsLibrary 1778 libr GLIB 11/10/05 11/10/05 0049
LexLib 0019 libr LxLb 11/08/05 11/08/05 0009
MathLib 0001 libr MthL 04/15/05 04/15/05 0009
ORLib 0001 libr ORlb 10/11/05 10/11/05 0001
psysLaunchDB 0001 lnch psys 10/04/02 08/01/06 0068
Graffiti ShortCuts 0000 macr graf 10/04/02 06/13/05 8019
DXTGMailPlugin 1778 mmpl DTGP 11/08/05 11/08/05 0009
SyncPanel 0003 panl SynP 10/04/02 10/04/02 0009
Unsaved Preferences 0000 pref psys 10/04/02 08/01/06 0001
Update 3.5.3 0032 ptch ptch 05/18/01 05/18/01 8021
Palm V Update 3.5.3 000A pupd palm 05/18/01 05/18/01 0001
Net Prefs 0000 rsrc netl 10/04/02 09/07/05 0001
68328EZ Serial Driver 000A sdrv u8EZ 05/18/01 05/18/01 0001
System MIDI Sounds 0001 smfr psys 10/04/02 10/04/02 0008
Saved Preferences 0000 sprf psys 10/04/02 08/01/06 0009
AddressStatesDB 0000 stat addr 10/04/02 01/08/05 0108
AddressTitlesDB 0000 titl addr 10/04/02 07/16/04 0108
VendorsDB 0000 vend exps 10/04/02 10/04/02 0008
Loading “Conflict Notifier”
Notifier 'Conduit Conflict Notifier' version 1.0.0
Notifier Conduit Conflict Notifier OK
Loading “Install Conduit”
Conduit “Install” version 3.0.0
Sync type is Nothing
Install did nothing
Loading “Apple”
Conduit “iSync Conduit” version 3.0.0
Sync type is Fast
iSync Conduit starting 1/8/06 23:01:51
Timeout waiting for Sync Engine, exiting 1/8/06 23:08:10
iSync Conduit: received NULL message, disconnecting... 1/8/06 23:08:10
iSync Conduit synchronization failed
“iSync Conduit” failed (error = #-1)
Loading “Voice Memo Conduit”
Conduit “Voice Memo” version 3.0.0
Sync type is Nothing
Voice Memo did nothing
Loading “Photos Conduit”
Conduit “Media” version 1.0.2
Sync type is Nothing
Media did nothing
Loading “Note Pad Conduit”
Conduit “Note Pad” version 3.0.0
Sync type is Nothing
Note Pad did nothing
Loading “Memos Conduit”
Conduit “Memos” version 3.0.0
Sync type is Nothing
Memos did nothing
Loading “Memo Conduit”
Conduit “Memo Pad” version 3.0.0
Sync type is Fast
Remote database 1 name is MemoDB
OK Memo Pad
Loading “Install Conduit”
Conduit “Install” version 3.0.0
Sync type is Nothing
Install did nothing
Loading “Backup Conduit”
Conduit “Backup” version 3.0.0
Sync type is Nothing
Remote database 1 name is Address Book
Remote database 2 name is Calculator
Remote database 3 name is Date Book
Remote database 4 name is Expense
Remote database 5 name is Launcher
Remote database 6 name is Mail
Remote database 7 name is Memo Pad
Remote database 8 name is Preferences
Remote database 9 name is Security
Remote database 10 name is Setup
Remote database 11 name is HotSync
Remote database 12 name is To Do List
Remote database 13 name is BGDB
Remote database 14 name is SyncAddressDB
Remote database 15 name is AddressDB
Remote database 16 name is SyncDatebookDB
Remote database 17 name is ExpenseDB
Remote database 18 name is LauncherDB
Remote database 19 name is MailDB
Remote database 20 name is ConnectionDB
Remote database 21 name is NetworkDB
Remote database 22 name is SolitaireFreeData
Remote database 23 name is SMSCDB
Remote database 24 name is ToDoDB
Remote database 25 name is SMS-Archiv
Remote database 26 name is OmniRemote
Remote database 27 name is WordToGoFonts
Remote database 28 name is English_Br.lex
Remote database 29 name is - Getting Started Tips -
Remote database 30 name is BeepMaker
Remote database 31 name is dbScan
Remote database 32 name is Converter
Remote database 33 name is Dial!
Remote database 34 name is SheetToGo
Remote database 35 name is DocsToGo
Remote database 36 name is WordView+
Remote database 37 name is Filez
Remote database 38 name is Metronome
Remote database 39 name is WP_P2P
Remote database 40 name is Graffiti
Remote database 41 name is Remote
Remote database 42 name is SolFree
Remote database 43 name is AddressCitiesDB
Remote database 44 name is CitiesDB
Remote database 45 name is AddressCompaniesDB
Remote database 46 name is AddressCountriesDB
Remote database 47 name is AuthenticationMgr
Remote database 48 name is EncryptionMgr
Remote database 49 name is GraphicsLibrary
Remote database 50 name is LexLib
Remote database 51 name is MathLib
Remote database 52 name is psysLaunchDB
Remote database 53 name is Graffiti ShortCuts
Remote database 54 name is DXTGMailPlugin
Remote database 55 name is SyncPanel
Remote database 56 name is System MIDI Sounds
Remote database 57 name is Saved Preferences
Remote database 58 name is AddressStatesDB
Remote database 59 name is AddressTitlesDB
Remote database 60 name is VendorsDB
Backup did nothing
Loading “Conflict Notifier”
Notifier 'Conduit Conflict Notifier' version 1.0.0
Notifier Conduit Conflict Notifier OK
Last sync time and PC ID updated on handheld
HotSync Complete 1/8/06 23:08:20
PowerBook G4 Mac OS X (10.4.2)not really answered. I had to wipe the Palm.
-
Well, so far, Family Sharing is a complete fail. After adding my kids to the family, they are no longer able to update any apps. They get an error about "Your family doesn't have a valid payment method". What?? This after I had to switch our PayPal payment method which was good for years, but somehow isn't supported with Family Sharing, to my MasterCard. So, clearly we DO have a valid payment method because you can't even setup Family Sharing unless you have a valid payment method. And the MasterCard shows valid and I'm able to buy apps.
Also, no matter what I did to try to see the family purchases - restarted the device, downloaded a free app - purchases from other family members never showed up under Purchases in iTunes Store or App Store apps.
So much for Family Sharing. Anyway, we solved the app update problem by kicking everyone out of the family and abandoning hope of easily sharing purchased music and apps. It sounded good....evidently too good to be true.if the MasterCard is a debit card, you cannot use that for children under 13. Not sure why we can't use Paypal either.
-
How To: Setup Hotmail as a POP3
If you have a Windows Live Hotmail Plus subscription, you can use a POP3 (POP3, or Post Office Protocol 3, is a protocol that's used to retrieve e-mail from a mail server.) server to add your Windows Live Hotmail account to Microsoft Outlook Express and access messages there. If you download and install Windows Live Mail, you can add your Windows Live Hotmail account to Windows Live Mail and access your messages and contacts there.
Use a POP3 server to add your Windows Live Hotmail account to Outlook Express
1: In Outlook Express, click the Tools menu, and then click Accounts.
2: Click Add, and then click Mail.
3: Type your name, and then click Next.
4: Type your full Windows Live Hotmail e-mail address, and then click Next.
5: Enter the following information, and then click Next:
- In the My incoming mail server is a box, click POP3.
- In the Incoming mail (POP3, IMAP, or HTTP) server box, type pop3.live.com.
- In the Outgoing mail (SMTP) server box, type smtp.live.com
6: Type the account name and the password for your Windows Live Hotmail account. Clear the Remember password check box unless you're the only person with access to the computer. Make sure that the Log on using Secure Password Authentication (SPA) check box isn't selected.
7: Click Next, and then click Finish.
8: In the Internet Accounts window, click the Mail tab, click the Windows Live Hotmail account that you added, and then click Properties.
9: Click the Advanced tab, under Server Port Numbers, enter the following information, and then click OK:
- In the Incoming server (POP3) box, type 995.
- In the Outgoing server (SMTP) box, type 25.
- Under both Outgoing mail (SMTP) and Incoming mail (POP3), select the This server requires a secure connection (SSL) check box.
10: Click Close.I just started the setup process for my Hotmail account on my iPhone (3G). After entering my email address and password, it immediately said:
"pop3.live.com
A Windows Live Hotmail Plus subscription is required to use Hotmail accounts with Mail. Visit get.live.com/mailplus/features for details. You can also access your Hotmail account on the web at mail.live.com."
(I have a Hotmail "Plus" account, so I'm golden there.)
After hitting "Next", it verified everything, and all seems to be well. I'm now easily able to use my Hotmail account. I did not have to do anything additional. This is my 1st iPhone, so I'm not sure when Apple actually changed the Hotmail "install" method (2.1?), but it's much easier than it used to be in order to set it up (see here: http://discussions.apple.com/thread.jspa?threadID=1126292 ). The only downside is that I'm only able to see my "Inbox", and not my other folders (another issue discussed in the above mentioned link).
I hope this helps!
Maybe you are looking for
-
Multiple Users on One Mac Attached to One Airport Extreme
We have an Airport Extreme running firmware 7.4.2 that hosts 2 USB drives, a "backup" drive and an "iTunes" drive. I'm not using the backup drive for TimeMachine, just manual backups. We have a 2008 iMac running Snow Leopard connected via ethernet. M
-
Freight condition value: validate automatic fill in me23n -PO creation
Hi all i have a query. when creating a PO( me23n), few fields gets automatically filled. like, freight conidtions, contidion value, its amount.... etc.. i would like to cross verify whether they are correct. and also know based on what those values f
-
"Folio builder" update freezes InDesign CS6
Hello, The 'Folio builder' panel of InDesign kindly invited me to upgrade but unfortunalately, it now freezes InDesign as soon as I click on it. Thanks for any help, Patrick
-
Happy Valentine's Day! QUESTION: How do I change the appearance of a pre-existent HTML document to appear as a framed picture. BACKGROUND: There are a very large number of these pre-existent documents, and each document will be called up by one or se
-
Deleted Gmail in iOS reappears in Mavericks Mail
Throughout my work day, I'm deleting Gmails via my iOS device. When I get back home on my desktop and Mail app in Mavericks, all that Gmail i thought i'd deleted is just sitting in my Inbox still. Shouldn't that Gmail also be gone from my Mail app if