Hotspot spotty

I have an iPhone 4 and a hotspot account. But the hotspot service is "spotty." That is, it sometimes works with my iPad, and sometimes does not. Same thing with the Bluetooth and WiFi connections. Sometimes they work, and more often they do not work. When I try to Sync the Bluetooth connection between my iPhone and iPad, it NEVER syncs. The iPad can sometimes "see" the iPhone, but a message pops up on the iPhone saying that the iPad (at least the NAME of the iPad) is incompatible.
Any ideas boss?

I have reviewed the system requirements. I have an iPhone 4 running iOS 5.0.1 and an iPad running the same OS version. I have HotSpot enabled through my cell service provider, as evidenced by the fact that it SOMETIMES works. I am troubled by the "incompatible" message that only happens when I try to connect the two devices via Bluetooth. (not wi-fi).
So... while I appreciate the link that AnaMusic provided, and I understand the problem a little better, the problem remains... an UNSOLVED MYSTERY.

Similar Messages

Personal Hotspot goes away, takes forever to get it back, then adds another homegroup each time

I am out of town and trying to use my personal hotspot. Ever since I updated to OS 5 I have had this problem. When I disconnect in windows 7, I can not reconnect withouth messing with settings. When it does connect it creates a new homegroup so my iPhone is now up to group 10! Yikes I need help!! I am working remotely this week plus I am in school full time I dont have time for this? Any suggestions out there??? Went to the ATT store they had me delete the connection and start over, worked fine for a bit, then shut down my computer and I am finally back on after 30 minutes of trying.

Same problem. iPhone 4s w/OS 5.
I activate my iPhone's hotspot (with password), connect via wifi, work (or play) a bit, get distracted for a few minutes, come back and there's no internet, check wifi connection, not connected, signal from the iPhone is not present, refresh to look for wifi signals, other signals are there but not iPhone's. The hotspot simply goes away.
I ditched another isp with spotty service with the intention of connecting my pc and iPad to the internet via my iPhone. Did I make a big mistake thinking my iPhone hotspot would be more stable?

What is the best way to increase signal strength to my 5510L Hotspot in a rural area with bad coverage? Inexpensive methods?

Living in a rural area with "spotty coverage". No cable here. Didn't want to go the DSL route because we will probably only be here 6 months. Verizon rep said you'll have no problems with the Hotspot when he sold us on it. Said we should get 4G. Well, it turns out we only get 3G AT BEST, usually 1X whatever that means. 12-36% signal. 1-2 bars. Very slow internet speed. Frustrating.
I need a solution to increase my signal strength. Do the extenders/boosters work? Is there an inexpensive way? Maybe I should have gone with the DSL with all the fees.
Help please.

Check into amplifiers and antennas:
http://3gstore.com/page/13_will_an_antenna_help_me.html
Perform what is called a Site Survey to collect statistics about your wireless environment. Compare those stats against the Interpret the Results tab of that site to see if anything can be done or not.
Most of this equipment comes with a return policy. There shouldn't be too much harm in running a site survey, deciding what product to invest into, test it out and return if it doesn't work as expected.
Be forewarned, you cannot amplify a signal that is not already there. If you are out in the boonies with no 4G LTE coverage then an amplifier may not have anything to work with. Most booster kits are more effective with 3G signals anyways.

Hotspot Intermittent

Has anybody had an issue with their hotspot being intermittent or dropping internet connectivity? My iPad and laptop connect to the hotspot without a problem but sometimes still show "no internet connectivity" or browsing is slow or spotty. Any fixes?!?

I did have this problem extremely bad when i first got my razr maxx. It was bad to the point of cs wanting to exchange phones for me on several occasions. I waited for the ics update which cured the hotspot problems along with several other functions. Are you running gingerbread ics or jb ?When the hotspot is on and ipad or whatever is connected does the phone show white or blue bars? A little more info would help. Jesse

Macbook pro can´t find/connect to my hotspot

Dear experts!
I recently moved to a new place and got myself a T-Mobile HomeNet Router. Everything works fine (WiFi and Ethernet) with all devices (iPhone, iPad, iMac, Linux-machine...) EXCEPT my MacBook Pro (specs below in the product section) :-(
Ever since I moved the Macbook can´t find or connect to my home hotspot. Settings on the router are as follows:
- 802.1 b/g (it IS capable of b/g/n but I found a thread somewhere pointing out that this could be an issue)
- channel 13 (deactived auto-channel because my neighbours had overlapping channel settings...this was the only one that worked)
- rate auto
- frequency 2.4 GHz
- 30% signal strength (same reason as above)
- QoS activated
- SSID hidden (tried broadcasting it, made no difference)
- WPA2-PSK
- AES (TKIP and TKIP+AES available as well...but neither made any difference)
I can connect via ethernet, however that´s not the intended purpose of neither my notebook nor the router :-/ Someone suggested it might be an encryption issue but even without ANY encryption the hotspot won´t show up in the list. Password contains special characters but even my old iMac doesn´t seem to have problems with it. I tried connecting manually via "other network" without success. Also via Controlpanel -> Network -> Assist me ...
I´m sitting right next to my router so the signal strength can´t be the cause either (besides all other devices work just fine anywhere in my appartement). Restarted all devices, each one is up to date. Last thing I tried was making the changes in Firefox cause someone suggested it might be a bug in the router software, still no success.....I´m out of ideas.
Posted this in another Mac forum already but no one could help me :-( You guys are my last hope ... does anyone know this issue and how to solve it??
any ideas would be greatly appreciated!
many thanks in advance
tchintchie

nevermind...here´s what solved it for me:
https://discussions.apple.com/docs/DOC-3411

How to set up a wireless private bubble at paid hotspot? WTR54GS

Hi,
I have the WTR54GS travel router. Reading the manual I understand I can create a private wifi bubble with the WTR54GS to share a hot spot.
From the manual:
"You can also use multiple devices on a single hotspot account in a coffee shop or airport lounge and be protected with WPA Personal encryption or a powerful SPI firewall".
I've successfully used the WTR54GS as an AP with the router connected by cable to a wired Internet source.
But how do I set it up to receive one wifi signal then rebroadcast as a private "bubble" I don't see any specific settings in the setup or descriptions in the manual. Maybe it's easier than I think?
If possible I'd like to be able to use a B wifi device (my PDA) at a place that's only broadcasting G.
thanks.
-Tony
Message Edited by tony_vancouver on 02-23-2008 10:00 AM
Message Edited by tony_vancouver on 02-23-2008 10:03 AM

The WTR54GS (wireless travel router) is often confused with the WRT54GS (wireless router), because of their similar names.
The WTR54GS (Travel Router) can accept an Internet connection from an ethernet cable or an unsecured wireless network. This is set up using the very first item on the router's setup pages, namely "Incoming Internet type" which can be set to "wired" or "wireless". The key thing here is that the WTR54GS cannot use an encrypted wireless system for its incoming Internet connection.
It can then generate a secured (WEP, WPA, or WPA2) wireless LAN, under your own unique SSID, and you can connect several wireless computers to it. (If you have a switch, you can also connect several wired computers to it.)
If you are trying to use the router to share a single paid unsecured wireless connection, then it should work. Be sure when you sign up that you use the router, so the service recognizes the router's MAC address (and not your computer's MAC address) as a "paid" user.
If you are trying to use the router to provide security, this will not happen with this type of a "wireless network-to-wireless network" setup. The reason for this is that all your transmissions ultimately are passed unencrypted between the WTR54GS and the hotel's wireless router.
On the other hand, if you use a wired "Incoming Internet Connection", then the router works quite nicely at setting up a shared and secure wireless network. ( This assumes that the wire you are using is secure. )
By the way, your wireless b device should easily be able to connect to a wireless g network.
Message Edited by toomanydonuts on 02-28-2008 04:18 PM

Lenovo g570 wifi hotspot sharing in windows 8 not working below the log

Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>netsh wlan set hostednetwork mode=allow ssid=name wifi Hotsp
ot key=yourpassword
One or more parameters for the command are not correct or missing.
Usage: set hostednetwork [mode=]allow|disallow [ssid=]<ssid>
[key=]<passphrase> [keyUsage=]persistent|temporary
Parameters:
Tag Value
mode Specifies whether to allow or disallow the hosted network.
ssid SSID of the hosted network.
key The user security key used by the hosted network.
keyUsage Specifies whether the user security key is persistent or
temporary.
Remarks:
This command changes the properties of hosted network, including: SSID
of the hosted network, allow or disallow the hosted network in the system,
and a user security key that is used by the hosted network.
The user security key should be a string with 8 to 63 ASCII characters,
eg. a passphrase, or 64 hexadecimal digits which represent 32 binary
bytes.
If keyUsage is specified as persistent, the security key will be saved
and used when the hosted network is started again in future. Otherwise
it will be used only when the current or next time the hosted network
is started. Once the hosted network is stopped, the temporary security
key will be deleted from the system. If keyUsage is not specified, it
is persistent by default.
This command requires administrator privileges to allow or disallow the
hosted network.
Examples:
set hostednetwork mode=allow
set hostednetwork ssid=ssid1
set hostednetwork key=passphrase keyUsage=persistent
C:\Windows\system32>
C:\Windows\system32>netsh wlan set hostednetwork mode=allow
The hosted network mode has been set to allow.
C:\Windows\system32>ssid=name wifi Hotspot key=yourpassword
'ssid' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>netsh wlan set hostednetwork mode=allow ssid=name wifi Hotsp
ot key=yourpassword
One or more parameters for the command are not correct or missing.
Usage: set hostednetwork [mode=]allow|disallow [ssid=]<ssid>
[key=]<passphrase> [keyUsage=]persistent|temporary
Parameters:
Tag Value
mode Specifies whether to allow or disallow the hosted network.
ssid SSID of the hosted network.
key The user security key used by the hosted network.
keyUsage Specifies whether the user security key is persistent or
temporary.
Remarks:
This command changes the properties of hosted network, including: SSID
of the hosted network, allow or disallow the hosted network in the system,
and a user security key that is used by the hosted network.
The user security key should be a string with 8 to 63 ASCII characters,
eg. a passphrase, or 64 hexadecimal digits which represent 32 binary
bytes.
If keyUsage is specified as persistent, the security key will be saved
and used when the hosted network is started again in future. Otherwise
it will be used only when the current or next time the hosted network
is started. Once the hosted network is stopped, the temporary security
key will be deleted from the system. If keyUsage is not specified, it
is persistent by default.
This command requires administrator privileges to allow or disallow the
hosted network.
Examples:
set hostednetwork mode=allow
set hostednetwork ssid=ssid1
set hostednetwork key=passphrase keyUsage=persistent
C:\Windows\system32>
C:\Windows\system32>netsh wlan show drivers
Interface name: Wi-Fi
Driver : Qualcomm Atheros AR9285 Wireless Network Adapter
Vendor : Qualcomm Atheros Communications Inc.
Provider : Microsoft
Date : 7/3/2012
Version : 3.0.0.130
INF file : C:\Windows\INF\netathrx.inf
Files : 2 total
C:\Windows\system32\DRIVERS\athrx.sys
C:\Windows\system32\drivers\vwifibus.sys
Type : Native Wi-Fi Driver
Radio types supported : 802.11b 802.11g 802.11n
FIPS 140-2 mode supported : Yes
802.11w Management Frame Protection supported : Yes
Hosted network supported : Yes
Authentication and cipher supported in infrastructure mode:
Open None
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA-Enterprise TKIP
WPA-Personal TKIP
WPA2-Enterprise TKIP
WPA2-Personal TKIP
Vendor defined TKIP
WPA2-Enterprise Vendor defined
Vendor defined Vendor defined
WPA-Enterprise CCMP
WPA-Personal CCMP
WPA2-Enterprise CCMP
Vendor defined CCMP
WPA2-Enterprise Vendor defined
Vendor defined Vendor defined
WPA2-Personal CCMP
Vendor defined Vendor defined
Authentication and cipher supported in ad-hoc mode:
Open None
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA2-Personal CCMP
Vendor defined Vendor defined
Interface name: Wi-Fi 6
Driver : Belkin USB Wireless Adaptor
Vendor : Belkin International, Inc.
Provider : Microsoft
Date : 6/1/2011
Version : 1086.41.214.2012
INF file : C:\Windows\INF\net8192su64.inf
Files : 2 total
C:\Windows\system32\DRIVERS\RTL8192su.sys
C:\Windows\system32\drivers\vwifibus.sys
Type : Native Wi-Fi Driver
Radio types supported : 802.11n 802.11g 802.11b
FIPS 140-2 mode supported : No
802.11w Management Frame Protection supported : No
Hosted network supported : Yes
Authentication and cipher supported in infrastructure mode:
Open None
WPA2-Personal CCMP
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA-Enterprise TKIP
WPA-Personal TKIP
WPA2-Enterprise TKIP
WPA2-Personal TKIP
WPA-Enterprise CCMP
WPA-Personal CCMP
WPA2-Enterprise CCMP
Vendor defined TKIP
Vendor defined CCMP
Authentication and cipher supported in ad-hoc mode:
Open None
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA2-Personal CCMP
C:\Windows\system32>Type netsh wlan set hostednetwork mode=allow ssid=Hotspotnam
e key=password
The system cannot find the file specified.
Error occurred while processing: netsh.
The system cannot find the file specified.
Error occurred while processing: wlan.
The system cannot find the file specified.
Error occurred while processing: set.
The system cannot find the file specified.
Error occurred while processing: hostednetwork.
The system cannot find the file specified.
Error occurred while processing: mode.
The system cannot find the file specified.
Error occurred while processing: allow.
The system cannot find the file specified.
Error occurred while processing: ssid.
The system cannot find the file specified.
Error occurred while processing: Hotspotname.
The system cannot find the file specified.
Error occurred while processing: key.
The system cannot find the file specified.
Error occurred while processing: password.
C:\Windows\system32>wlan set hostednetwork mode=allow ssid=Hotspotname key=passw
ord
'wlan' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>netsh wlan set hostednetwork mode=allow ssid=Hotspotname key
=password
The hosted network mode has been set to allow.
The SSID of the hosted network has been successfully changed.
The user key passphrase of the hosted network has been successfully changed.
C:\Windows\system32>netsh wlan start hostednetwork
The hosted network couldn't be started.
A device attached to the system is not functioning.
C:\Windows\system32>
Solved!
Go to Solution.

hi airtet,
Seing that you have an both the Qualcomm Atheros AR9285 Wireless Network Adapter and the Belkin USB Wireless Adaptor, have you tried disabling one or the other and run Connectify?
You may also want to check this discussion for more info and troubleshooting.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hotspot core dumping during JVM garbage collection ?

We have an application which calls a 3rd party supplied server API which has recently been upgraded to use Java 1.5
We are getting the following error reported by our client application. The application is also now running Java 1.5 but references many classes in jar files which would have quite old code in.
The supplier of the API has stated that the problem requires us to recompile all our jar files using v 1.5 ( including things like jconnect and jms ?!?!? ). This sounds like a bit of a cop-out to me, not to mention being impossible since we don't have the source for things like jconnect.
I suspect that there is a garbage collection problem at the bottom of all this, but I'm not sure how I can "prove" this, nor do I currently have any real clue as to how to fix any GC problem that may exist.
The application is supposed to wait for a message on a MQSeries queue and then transforms it via Xalan XSLT and sends it to a Server application. I've tried playing around with heap sizes etc but that just seems to make it worse. If I leave it at the settings that the previous version used then the client at least manages to process a couple of messages before core dumping. There doesn't seem to be a consistent trigger event to cause the core dump ( it's not a message arriving on a queue for example ) but it does seem to be fairly consistent timewise, i.e. after
Any ideas gratefully accepted.
Here's a logfile excerpt from my applications showing the Hotspot error message :
=====================================================================================
08-Jul-2008 10:01:05 Waiting for messages from COLT.BBFS
08-Jul-2008 10:02:05 Waiting for messages from COLT.BBFS
08-Jul-2008 10:03:05 Waiting for messages from COLT.BBFS
405.815: [GC [PSYoungGen: 17331K->9244K(37632K)] 111702K->103615K(192128K), 0.1615910 secs]
405.977: [Full GC#
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGBUS (0xa) at pc=0xfe141348, pid=2600, tid=8
# Java VM: Java HotSpot(TM) Server VM (1.5.0_03-b07 mixed mode)
# Problematic frame:
# V [libjvm.so+0x141348]
# An error report file with more information is saved as hs_err_pid2600.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
=====================================================================================
The logfile referred to in the error message contains the following.
=====================================================================================
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGBUS (0xa) at pc=0xfe141348, pid=2600, tid=8
# Java VM: Java HotSpot(TM) Server VM (1.5.0_03-b07 mixed mode)
# Problematic frame:
# V [libjvm.so+0x141348]
--------------- T H R E A D ---------------
Current thread (0x001484d8): VMThread [id=8]
siginfo:si_signo=10, si_errno=0, si_code=1, si_addr=0x0000080f
Registers:
O0=0x00487588 O1=0xfe7d6454 O2=0x000079b0 O3=0x00007800
O4=0x00008868 O5=0x00147d48 O6=0xf8781460 O7=0xfe0f7938
G1=0xe52aaae8 G2=0x00000003 G3=0x00000003 G4=0x001484d8
G5=0xf8781d98 G6=0x00000002 G7=0xf8781d98 Y=0x805683e2
PC=0xfe141348 nPC=0xfe14134c
Top of Stack: (sp=0xf8781460)
0xf8781460: fe786000 00c6ba20 fe10013c e54bab68
0xf8781470: 0000080f e54bab6c 0000080f 00000004
0xf8781480: 00487588 00000134 e54bab6c 00000004
0xf8781490: 00000001 00000000 f87814c0 fe17aef4
0xf87814a0: fe6485b4 fe7d899c 001484d8 0011da40
0xf87814b0: 00148988 00148c10 00148d7c f8781880
0xf87814c0: 007c3389 007c3c0e 00000f87 00008868
0xf87814d0: 00008800 00487588 fe141310 fe7d6454
Instructions: (pc=0xfe141348)
0xfe141338: ec 06 c0 1a 80 a5 a0 00 22 40 00 0a ba 07 60 01
0xfe141348: f2 05 a0 00 ae 0e 60 03 80 a5 e0 03 22 40 00 05
Stack: [0xf8702000,0xf8781d98), sp=0xf8781460, free space=509k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [libjvm.so+0x141348]
V [libjvm.so+0x17aefc]
V [libjvm.so+0x2d557c]
V [libjvm.so+0x300ef8]
V [libjvm.so+0x301e84]
V [libjvm.so+0x2ff950]
V [libjvm.so+0x29df30]
V [libjvm.so+0x362b44]
V [libjvm.so+0x6436f0]
VM_Operation (0xe03012b0): parallel gc system gc, mode: safepoint, requested by thread 0x0031bca0
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x00b2c028 JavaThread "Thread-4" [_thread_in_native, id=85]
0x007f5048 JavaThread "Thread-0" [_thread_blocked, id=84]
0x00c27cf0 JavaThread "Notification Delivery" [_thread_blocked, id=81]
0x0026fa08 JavaThread "RMI LeaseChecker" daemon [_thread_blocked, id=73]
0x00821048 JavaThread "RMI RenewClean-[162.11.2.32:44425]" daemon [_thread_blocked, id=70]
0x0031bca0 JavaThread "GC Daemon" daemon [_thread_blocked, id=67]
0x00cd5d28 JavaThread "RMI Reaper" [_thread_blocked, id=66]
0x003c9300 JavaThread "Timer-0" daemon [_thread_blocked, id=65]
0x00929fe0 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=64]
0x0089bf18 JavaThread "SeedGenerator Thread" daemon [_thread_blocked, id=42]
0x00c47248 JavaThread "Pool thread #7" daemon [_thread_blocked, id=38]
0x00c466a0 JavaThread "Pool thread #6" daemon [_thread_blocked, id=37]
0x00311850 JavaThread "Pool thread #5" daemon [_thread_blocked, id=36]
0x00287a40 JavaThread "Pool thread #4" daemon [_thread_blocked, id=35]
0x00286e98 JavaThread "Pool thread #3" daemon [_thread_blocked, id=34]
0x00c134b0 JavaThread "Pool thread #2" daemon [_thread_blocked, id=33]
0x00ad09e0 JavaThread "Pool thread #1" daemon [_thread_blocked, id=32]
0x00286cd8 JavaThread "PoolThreadManager" daemon [_thread_blocked, id=31]
0x00c129e0 JavaThread "Channel Reaper" daemon [_thread_blocked, id=30]
0x00c669e8 JavaThread "ORB Daemon Thread" daemon [_thread_blocked, id=29]
0x00b10170 JavaThread "Worker for ServerProtocol: (iiop) /0.0.0.0:20168" daemon [_thread_blocked, id=22]
0x008a17e0 JavaThread "Syn~ Client" daemon [_thread_blocked, id=21]
0x003dc378 JavaThread "PoolScavenger0" daemon [_thread_blocked, id=20]
0x0015a928 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=15]
0x00159880 JavaThread "CompilerThread1" daemon [_thread_blocked, id=14]
0x00158a18 JavaThread "CompilerThread0" daemon [_thread_blocked, id=13]
0x00157b98 JavaThread "AdapterThread" daemon [_thread_blocked, id=12]
0x00156dc8 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=11]
0x0014ccd8 JavaThread "Finalizer" daemon [_thread_blocked, id=10]
0x0014ad90 JavaThread "Reference Handler" daemon [_thread_blocked, id=9]
0x00038238 JavaThread "main" [_thread_in_native, id=1]
Other Threads:
=>0x001484d8 VMThread [id=8]
0x0015c3b0 WatcherThread [id=16]
VM state:at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x00037728/0x00037758] Threads_lock - owner thread: 0x001484d8
[0x00033650/0x00037ba8] Heap_lock - owner thread: 0x0031bca0
Heap
PSYoungGen total 37632K, used 9244K [0xf2eb0000, 0xf7ba0000, 0xf8400000)
eden space 28352K, 0% used [0xf2eb0000,0xf2eb0000,0xf4a60000)
from space 9280K, 99% used [0xf4a60000,0xf5367080,0xf5370000)
to space 25216K, 0% used [0xf6300000,0xf6300000,0xf7ba0000)
PSOldGen total 154496K, used 94371K [0xe8400000, 0xf1ae0000, 0xf2eb0000)
object space 154496K, 61% used [0xe8400000,0xee028e78,0xf1ae0000)
PSPermGen total 35584K, used 18260K [0xe4400000, 0xe66c0000, 0xe8400000)
object space 35584K, 51% used [0xe4400000,0xe55d5158,0xe66c0000)
Dynamic libraries:
0x00010000      /dsdvlp/java/jvm/jdk1.5.0_03/bin/java
0xff350000      /usr/lib/libthread.so.1
0xff340000      /usr/lib/libdl.so.1
0xff200000      /usr/lib/libc.so.1
0xff390000      /usr/platform/SUNW,Sun-Fire-880/lib/libc_psr.so.1
0xfe000000      /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/server/libjvm.so
0xff1e0000      /usr/lib/libsocket.so.1
0xff2d0000      /usr/lib/libsched.so.1
0xff1b0000      /usr/lib/libCrun.so.1
0xff160000      /usr/lib/libm.so.1
0xff080000      /usr/lib/libnsl.so.1
0xff060000      /usr/lib/libmp.so.2
0xff030000      /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/native_threads/libhpi.so
0xfdfc0000      /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/libverify.so
0xfdf80000      /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/libjava.so
0xfdf50000      /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/libzip.so
0xfb7e0000      /usr/lib/locale/en_GB.ISO8859-1/en_GB.ISO8859-1.so.2
0xe4190000      /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/libnet.so
0xe3bd0000      /dsdvlp/lib/5/libSolarisNatives.so
0xe3e90000      /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/librmi.so
VM Arguments:
jvm_args: -Djava.ext.dirs=/dsdvlp/java/tmijar/firs7/lib/cli:/dsdvlp/java/tmijar/firs7/lib/cli/ext:/dsdvlp/java/tmijar/firs7/lib/cmn/OpenORB:/dsdvlp/java/tmijar/firs7/lib/cmn/OpenORB/ext:/dsdvlp/java/tmijar/firs7/lib/cmn:/dsdvlp/java/tmijar/firs7/lib/cmn/ext:/dsdvlp/java/tmijar/firs7/daemonlib -Duser.dir=/dsdvlp/java/tmijar/firs7 -Dopenorb.config=file:/dsdvlp/java/tmijar/firs7/configs/OpenORB/config/SynOpenORB.xml -Dopenorb.home=file:/dsdvlp/java/tmijar/firs7/configs/OpenORB -Dcom.coexis.syn.general.orbbinding=com.coexis.syn.general.orbbinding.openorb.OpenORBBinding_1_4 -Dsun.rmi.dgc.client.gcInterval=360000 -Dsun.rmi.dgc.server.gcInterval=360000000 -Xms32m -Xmx256m -Dcom.coexis.syn.clientcommandsconfiglocation=file://localhost//dsdvlp/java/tmijar/firs7/configs/clientcommands.xml -Dcom.coexis.syn.clientconfiglocation=file://localhost//dsdvlp/java/tmijar/firs7/configs/fsbbtd_client.xml -XX:+PrintGCTimeStamps -XX:+PrintGCDetails
java_command: com.coexis.syn.mqmessaging.daemon.RunDaemon -p /dsdvlp/bin/5/lndsfsd_fsbbtd.properties start
Environment Variables:
JAVA_HOME=/dsdvlp/java/jvm/jdk150
CLASSPATH=.:/dsdvlp/java/jar/jconnect520.jar:/dsdvlp/java/jar/vbjapp340.jar:/dsdvlp/java/jar/vbjorb340.jar:/dsdvlp/java/jar/javax_jndi120.jar
PATH=/usr/local/etc:/usr/lang:/usr/openwin/bin:/usr/ucb:/bin:/usr/etc:/usr/local/5/bin:/dsdvlp/bin/5:/dsdvlp/bin/4:/home/app/sybase/5/bin:/home/app/sybase/5/localscripts:/home/app/sybase/5/sqr:/home/app/lang:/home/app/lang/SC2.0.1:/usr/ccs/bin:/usr/local/opt/Acrobat3/bin:/dsdvlp/bin:.
LD_LIBRARY_PATH=/dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/server:/dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc:/dsdvlp/java/jvm/jdk1.5.0_03/jre/../lib/sparc:/usr/lib:/usr/openwin/lib:/usr/local/5/lib:/dsdvlp/lib/5:/dstest/lib/5:/home/app/sybase/5/lib:/dstest/cats/sun4/lib:/tmitest/Opus/opus/lib
SHELL=/bin/csh
DISPLAY=CLI00184.mfil.local:1.0
OS=5
--------------- S Y S T E M ---------------
OS: Solaris 8 2/02 s28s_u7wos_08a SPARC
Copyright 2002 Sun Microsystems, Inc. All Rights Reserved.
Assembled 18 December 2001
uname:SunOS 5.8 Generic_117350-20 sun4u (T1 libthread)
rlimit: STACK 8192k, CORE 9216k, NOFILE 4096, AS infinity
load average:2.24 2.67 2.68
CPU:total 4 has_v8, has_v9, has_vis1, has_vis2, is_ultra3
Memory: 8k page, physical 8388608k(166384k free)
vm_info: Java HotSpot(TM) Server VM (1.5.0_03-b07) for solaris-sparc, built on Apr 13 2005 03:31:26 by unknown with unknown Workshop:0x550

The very first suggestion I have is to move your VM to a more recent update of 1.5.0.
It looks like you are crashing with 5.0u3, and I'm pretty sure 5.0u16 is available. You
don't want to waste your time chasing a bug that's already been fixed.

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

Personal hotspot issue in iPhone 5 with iOS 6.1.4

My phone runs ios 6.1.4 And personal hotspot got disappeared... I dont have itunes installed in my computer and i have not backed up my data to erase my phone and start from scratch... What Should i do now...? From india using aircel network.. I need hotspot to download itunes to my laptop...

Oh yes there is. Here are the screen captures

HT204023 Just bought a new iphone 4 how do i connect to my ipad with hotspot

How do i connect with hotspot between my new iphone 4 and mt ipad2

iOS: Understanding Personal Hotspot
iOS: System requirements for Personal Hotspot

How do I use my iPhone to connect to the Internet. I down loaded safari v5.1.7 for my PC. I have added my iPhone to my computer but I can't figure out how to setup a hotspot or configure a network so my PC can access my phones data plan. Please help.

And how am I supposed to answer my own question?

I can't figure out how to respond so ill go this route. I can't seem to find the button/place to which I can choose, to turn on a hot spot. I have been through every option and searched to no avail. Could it be that my iPhone 4 is not hotspot capable as I was led to believe by the apple sales associate? Is there an app I can find to make my phone a wifi hotspot? So I can get on the Internet to view the pages I want that require adobe which this piece of **** software monger won't even support?

How do I turn my Macbook Air into a WiFi Hotspot?

I have a 11" Macbook Air (MBA). While I am able to turn my iPhone4S to turn into a hotspot and connect my Macbook to the internet through this connection, I would like to use it the other way around as well.
At times I connect my MBA to the Internet using a 3G Wireless Modem/Dongle. I tried activating Sharing in network settings, but I do not see the Ethernet/Airport options - only items visible are WiFi, Bluetooth.
Is there a simple way of turning your MBA into a hotspot - something my iPhone can easily latch on to as a WiFi connection?
Thanks!

The only way, and I'm not sure the air models can do this, is to have a ethernet adapter, usb or thunderbolt, and have it connected to a router by ethernet and then you can set the wifi card into the hotspot mode.
But if you have both a iphone with data connection and 3G dongle for the mac what is the purpose of connecting one device to the other for internet access? They both already have internet access and you are paying for both whether you use them or not.

Personal Hotspot does not work after update to 10.10.2

Good morning!
After my update to 10.10.2 on my MBP (15" mid 2010) my connection to the internet via personal hotspot (iPhone 5s, iOS 8.1.3) does not work.
The MBP connect to the hotspot, but there is no connection to the internet. My iPad (Retina, iOS 8.1.3) works fine simultaniously with good bandwidth.
Rebooting Mac, rebooting iPhone etc does not work.
Anyone else has this problem?
Any suggestions?

Just saw same problem with a client's computer.
MacBook Pro
WAS 10.5.1.
Installed 10.5.2, booted up. Fire up ichat, get your buddy list. Double click a name, says "Cannot Chat" in bold then says "Add at least one person to this chat before sending the first messsage." with an OK button.

I have a IPhone 4S. About a week ago my wifi wouldn't let me slide it to on. And my personal hotspot won't work. AND I PAY FOR THAT every month. I'm not going to keep paying for it if it doesn't work. What's the point?

I have a IPhone 4S and since about a week ago my wifi wouldn't let me slide it to the on side and my personal hotspot doesn'tI don't live in Quincy anymore:( but I'm game some weekend! work either. AND also I see a lot of other people with the same problem. And I PAY FOR IT EVERY MONTH . I'm going to stop paying if You can't help me thanks.

Is your wifi greeyd out; have you attempted to reboot the system?

Hotspot spotty

Similar Messages

Maybe you are looking for