Hotsync Shared Library Conflicts-Cannot Open

I cannot open HotSync Manager:
The application "HotSync Manager" could not be launched because of a shared library error: "4<HotSync Manager><HotSync Manager><HotSyncLib.PPC>"
I am hoping Apple users can help me find these files and delete them.
Help please

You probably need to update Palm Desktop to the 4.2.1 Rev D version to work with OS X. Start here and pull up the popup menus to get to the version you need:
http://www.palm.com/us/support/macintosh/mac_desktop.html
Here's how to remove Palm Desktop:
http://kb.palmone.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_Exter nal2001,case=obj(5916)

Similar Messages

I purchased a book and though it appears downloaded in my library, I cannot open it.

I purchased a book, as I have done before, but, although it appears as downloaded in my library, I cannot open it to read...?

If you are sure that the book is in the library, quit iBooks and then launch the app again and see if it will open.
Double tap the home button and the recently used apps appear. Find iBooks, tap and hold down on the icon until it wiggles then tap the minus sign to shut down the app. Tap the home button again to return to the home screen. Tap the iBooks icon to launch it and try to open the book now.
If this doesn't work, reboot the iPad. Hold down on the sleep button until the red slider appears and then slide to shut down. Hold the sleep button until the Apple logo appears in order to start up again. Launch iBooks again and try to open the book.

TS1371 itune library.itl cannot open because it can done by newer version

itune library.itl cannot open because it can done by newer version

your in Quicktime discussion, try the folks in the iTunes they might help

Shared Library Conflicts/HotSync/Palm

I have had trouble opening Hot Sync Manager to sync w/Bluetooth.
Keep getting ERROR Message:
The application "HotSync Manager" could not be launched because of a shared library error: "O<HotSync Manager><HotSync Manager><HotSyncLib.PPC><SetConfigureConduitCallBack>
Could Apple users please help me find these extensions so I can delete them and start clean.
Wish Error Messages would tell me where the heck these conflicting files are??
Thx all

You are seeing a variant of the single most frequently encountered error condition of the Palm Desktop software package under OS X. It is usually a result of the choice to install or upgrade system software using the archive and install option.
Whatever you do, do not arbitrarily delete rename, or move any Palm-related files or folders, as you will only aggravate the situation! Manually manipulating either the Palm software [including the HotSync Manager or the Transport Monitor] or iSync and the iSync Palm Conduit is not something you should attempt unless you understand how they operate, and are very familiar with the consequences of doing so.
There are a number of ways to address it, though the easiest is probably by following this set of instructions from Palm:
Macintosh 0S X 10.x: HotSync Manager could not be launched because of a shared library error
The Mac OS X installer includes an "Archive and Install" option. When you upgrade your Mac OS to a newer version of OS X, and select the "Archive and Install" option from the installer's "Select a Destination: Options" panel, you may receive the following error upon restart or attempting to launch HotSync Manager:
"The application "HotSync Manager" could not be launched because of a shared library error: "4"
Explanation: The Archive and Install option in the Mac OS X installer does not copy these files from the archived System and Library folders to the new OS installation. HotSync Manager requires these files to run properly.
Workaround: You must re-install Palm Desktop from the CD included with your handheld. After installing Palm Desktop from your CD you can install the latest web download from: http://www.palm.com/us/support/downloads
NOTE: That file is directly accessible here:
http://www.palm.com/us/support/macintosh/macdesk421revd.html
(Important Note: Be sure to install from your CD first as the web version does not include all the software included on your CD)

Sharing Preference pane "Cannot Open" error?

Hi all,
Im running Tiger 10.4.6 on a MacBook Pro 2.0, connecting to the Internet through an ADSL router via an Airport Express base station, everything fully updated.
Suddenly, when trying to open the "Sharing" preference-pane, I get this error:
Preferences Error
You cannot open Sharing preferences pane on this
computer. Contact the developer of this software
for a newer version.
I haven't installed or updated anything in the last few days, and it worked earlier today.
I have tried restarting, and deleted the following preferences, to no avail:
com.apple.sharing.firewall.plist
com.apple.networkConfig.plist
Any ideas?
TIA,
Thomas
MacBook Pro 2.0 / 2Gig RAM / 100gb, 7200 rpm Mac OS X (10.4.6)

Hello again, and thank you for your replies, and sorry for the late response.
First off; I have installed the latest 10.4.7 Combo Updater, but that did not install a new SharingPref.prefPane. I even removed the old one, before running the freshly downloaded Combo installer.
Actually, I did the exact same thing a week ago - same result.
So, in the meantime I had some work I needed to finish, so I didn't have time to investigate further, until this morning. Where I, much to my surprise, found the SharingPref.prefPane back in /Macintosh HD/System/Library/PreferencePanes/ and it was still the wrong version!
So "something" must be installing the wrong - old - SharingPref.prefPane. Well, I took a peek at my install log, searched for "sharing", and lo and
behold!
The mystery is - somewhat - solved. The old SharingPref.prefPane comes from and old Apple Remote Desktop 2.2 installer, that contains an installer called PantherSharing.pkg. See search from Console.app below.
What puzzles me, is the fact that I installed the wrong (old 2.2) version of ARD, to monitor a couple of servers, and of course uninstalled that version, and installed 3.0, the minute I realized my error.
How can that old installer keep "updating" my system, even after I've removed the old ARD? It's as if something is running the receipt, witch I funny enough, can't find on my system anymore.
The dates don't match either, or they do, but I would expect more entries from last week, where I removed the old SharingPref.prefPane and it mystically appeared again this morning.
The receipt must have run in the last week, but I can't find anything in my logs - install.log.0.gz OR install.log.
Maybe running a reciept dosen't get logged?
Ohh well Anyway - beneath is a copy of my log, and the question now is; How do I get the correct Pref-pane, when the Combo Installer doesn't install it?
Thanks for your help everybody, and shawnhm, thanks for Sharing my Pane ... Thank you, Thank you, I'm here all week
===============================
Anything matching "sharing" from "install.log.0.gz:
May 27 14:40:17 tbo : @(#)PROGRAM:Installer PROJECT:Installer-94 DEVELOPER:root BUILT:Jan 13 2006 18:32:16\n
May 27 14:40:17 tbo : Hardware: MacBookPro1,1 @ 2000 MHz (x2), 2048 MB
May 27 14:40:17 tbo : Running OS Build: 8I1119
May 27 14:40:17 tbo : Remote Desktop Installation Log
May 27 14:40:17 tbo : Opened from: /Volumes/Apple Remote Desktop 2.2/RemoteDesktop.mpkg
May 27 14:40:18 tbo : It took 0.906322 seconds to finish launching.
May 27 14:40:20 tbo : Distribution: Remote Desktop
May 27 14:40:22 tbo : Installation checks completed successfully.
May 27 14:40:36 tbo : admin auth received to install
May 27 14:40:36 tbo : =============================================================================== =
May 27 14:40:36 tbo : User picked Easy Install
May 27 14:40:36 tbo : Choices selected for installation:
May 27 14:40:36 tbo : Install: "Remote Desktop"
May 27 14:40:36 tbo : RemoteDesktop.mpkg : com.apple.mpkg.ARD : 2.2.0.1660000.0
May 27 14:40:36 tbo : RemoteDesktopAdmin220.pkg : com.apple.pkg.RemoteDesktopAdmin220 : 2.2.0.1660000.338
May 27 14:40:36 tbo : RemoteDesktopClient220.mpkg : com.apple.mpkg.ARDClient : 2.2.0.1660000.0
May 27 14:40:36 tbo : RemoteDesktopClient220.pkg : com.apple.pkg.RemoteDesktopClient220 : 2.2.0.1660000.338
May 27 14:40:36 tbo : PantherSharing.pkg : com.apple.pkg.PantherSharing : 2.0.0.1660000.338
May 27 14:40:36 tbo : RemoteDesktopRMDB733.pkg : com.apple.pkg.RemoteDesktopRMDB733 : 2.0.0.1660000.338
May 27 14:40:36 tbo : =============================================================================== =
May 27 14:40:36 tbo : It took 0.031255 seconds to summarize the package selections.
May 27 14:40:36 tbo : Starting installation:
May 27 14:40:36 tbo : Preparing volume "Macintosh HD" for installation
May 27 14:40:36 tbo : Configuring volume "Macintosh HD"
May 27 14:40:37 tbo : Preparing local booted disk
May 27 14:40:37 tbo : Create temporary directory "/private/tmp/RemoteDesktop.mpkg.4601SJd5k"
May 27 14:40:37 tbo : run preflight script for Apple Remote Desktop Admin Update
May 27 14:40:36 tbo : PantherSharing.pkg : com.apple.pkg.PantherSharing : 2.0.0.1660000.338
May 27 14:40:38 tbo : preflight[472]: /bin/mv /System/Library/PreferencePanes/SharingPref.prefPane /System/Library/PreferencePanes/SharingPref.tempSave
May 27 14:40:38 tbo : preflight[482]: /bin/mv /System/Library/PreferencePanes/SharingPref.prefPane /System/Library/PreferencePanes/SharingPref.tempSave
May 27 14:40:38 tbo : preflight[482]: mv: rename /System/Library/PreferencePanes/SharingPref.prefPane to /System/Library/PreferencePanes/SharingPref.tempSave/SharingPref.prefPane: No such file or directory
May 27 14:40:38 tbo : run preflight script for Panther Sharing Preferences
May 27 14:40:38 tbo : preflight[492]: /bin/mv /System/Library/PreferencePanes/SharingPref.prefPane /System/Library/PreferencePanes/SharingPref.tempSave
May 27 14:40:38 tbo : preflight[492]: mv: rename /System/Library/PreferencePanes/SharingPref.prefPane to /System/Library/PreferencePanes/SharingPref.tempSave/SharingPref.prefPane: No such file or directory
May 27 14:40:44 tbo : Processing Panther Sharing Preferences:
May 27 14:40:47 tbo : It took 0.080088 seconds to run preflight script for Panther Sharing Preferences
May 27 14:40:47 tbo : It took 0.681835 seconds to Install Panther Sharing Preferences: 20 elements
May 27 14:40:47 tbo : It took 0.680004 seconds to unsuccessfully Install package Panther Sharing Preferences
Jun 3 23:13:15 tbo : Panther Sharing Preferences Installation Log
Jun 3 23:13:15 tbo : Opened from: /Library/Receipts/PantherSharing.pkg
Jun 3 23:13:17 tbo : Distribution: Panther Sharing Preferences
MacBook Pro 2.0 / 2GB RAM / 100GB HD, 7200 rpm Mac OS X (10.4.7)

I Tunes Library.itl cannot open!! help!!

Everytime i try to open my itunes account it says ""the file "i Tunes Library.itl" cannot be read because it was created by a newer version of i Tunes"" it wont even open when i plug my phone in. I have no idea why it is doing this or hoe to fix it. if you could help me out that would be amazing!
<Email Edited by Host>

"iTunes Library.itl" cannot be read.. what is that supposed to mean? Im startinto think i should jsut ebay this thing off and i just had it for a few weeks.I went to that site and i did not see anything thats says downgrading it to 6 isnt the disc that comes with its a 6 version?all i saw was just a bunch of topics or which one do i cick on there?i jsut reinstalled the program to and it still dont work i have a 30GB black iPod is it worth all the hassle to try and fix it?and does not haeving a High speed port causing the problem to?
Message was edited by: nenarica144

ITunes Home Sharing library will not open

When I click on my sisters library ybder Shared it disapears. It does not open or load so I cannot download songs she has in her library. Now, when I open my itunes the shared section of the side bar is not even showing up. Please help!

Hi!, I hope my english still works and helps you: using Home sharing I have same issue on my 2 machines (iMac PPC with 10.5 & Macbook PRO intel with 10.6) and the HDD on first machine was partitioned and iTunes's library was copied on 2nd partition. Well, now the "old" iMac PPC reads and copies all library from Macbook, but not vice-versa so both libraries must be in the Home directory.
Hoping to be a help, I wish you a happy new year!

Shared Services and cannot open User Directories

Hi
After install and configure Shared service i loged in as admin and when i click on "user Directories" it is not give me in list of user, its look like its hanged. Log is saying CSS.XML file is read only, i check the file properties but its not. I am using Hyperion 9.3.1, Java 5.11 and tomcat 5
here is the log
please help me for this.
2009-05-28 16:46:40,265 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2009-05-28 16:47:00,718 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2009-05-28 16:48:18,203 [http-58080-Processor8] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2009-05-28 16:48:18,203 [http-58080-Processor8] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2009-05-28 17:10:44,359 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2009-05-28 17:11:11,234 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2009-05-28 17:15:48,921 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2009-05-28 17:15:48,921 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2009-05-28 17:26:14,343 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2009-05-28 17:26:36,031 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2009-05-28 17:28:26,750 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2009-05-28 17:28:26,750 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2009-05-29 16:12:20,453 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2009-05-29 16:12:43,937 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2009-05-29 16:13:03,484 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2009-05-29 16:13:03,484 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

CSS.XML file is not read only and not corrupt , here are the entries of the file
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hypsr:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
- <native name="Native Directory">
<password>{CSS}4N6lVcgiE/dGr8rFdvQLcA==</password>
</native>
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
- <delegatedUserManagement>
<enabled>false</enabled>
</delegatedUserManagement>
</css>

I have lost my Profiles folder in Applications Library, and cannot open Safari now?

I attempted to uninstall and reinstall Firefox due to experiencing extreme slow/freezing problems. However I restarted my computer in the middle of Firefox reinstalling all my Profile details (as I thought again, it had frozen). Now I have no Profile folder in Applications Library, so Firefox won't even open.

Back saving to MIF should work, but it’s probably faster to just retrieve a backup of the FM8 files & books and restore them over your botched FM12 versions. Then take a copy of that backup and put it on the trial machine to play away without impacting anything else.

Shared Services and cannot open User Directories Tree

Hello,
I have an issue with Shared Services 931. My OpenLDAP and Shared Services will start fine. I am using TomCat as deployment of the service.
When i login as admin, i goto the User Directories and try to expand (click on the + sign) and it says loading. Then i checked the logs and i see this in there.
"Unable to get css.xml file or file maybe read only". I check the file css.xml and it is not read only. I have even configured using another Oracle Schema, but still no luck.
Has anyone seen this before ?
Thanks,
Azmat Bhatti

Hi,
Have you tried rebooting you shared services server to see if it removes the lock?
What happens if you start shared services as a foreground app instead of starting it as a Windows service? Do you get further info in terms of errors?
Seb

NT DLL to Solaris Shared Library; C++ Exceptions

I have written a "plugin" DLL for a third party product that runs on NT. In my plugin I use C++ exception handling and it works wonderfully :-)
I am now trying to port my plugin so that it will work with the same third party product, but this time running on Solaris.
I knew I was going to have to port my DLL to Solaris and so made sure I did not use any Win32 specific anything. My code compiles & links fine on Solaris. For the most part it even works correctly.
The problem I have is that my code is not catching any of the exceptions it is throwing.
Section 5.14 of the C++ Programming Guide says that for exception handling to work in a shared library, it must be loaded with the RTLD_GLOBAL flag passed to the dlopen() function used to load the shared library.
Of course since the dlopen() function is in a third party product I have no way of knowing whether this parameter is being passed to the dlopen() function or not .. and more importantly I have no way of forcing it to be so.
So ultimately I guess the question for the more experienced shared library writers is .. do you just not use C++ exception mechanism because you can not force your shared library to be opened with the proper parameter to dlopen() .. or is there something else I can do to enable C++ exceptions in my shared library.

All works fine!...
$ mkdir /tmp/xxx
$ cat > dllfile.c
$ cat > dlluser.c
$ gcc -fPIC -c dllfile.c
$ gcc -shared -W1,-soname,libdllfile.so.1 -o libdllfile.so dllfile.o
$ gcc -o prog dlluser.c -ldl
$ ls -l
total 56
-rw-r--r-- 1 xxxxxx users 80 Апр 8 17:04 dllfile.c
-rw-r--r-- 1 xxxxxx users 908 Апр 8 17:15 dllfile.o
-rw-r--r-- 1 xxxxxx users 368 Апр 8 17:03 dlluser.c
-rwxr-xr-x 1 xxxxxx users 5260 Апр 8 17:15 libdllfile.so
-rwxr-xr-x 1 xxxxxx users 6412 Апр 8 17:16 prog
$
$ file *
dllfile.c:     c program text
dllfile.o:     ELF 32-bit MSB relocatable SPARC Version 1
dlluser.c:     c program text
libdllfile.so:     ELF 32-bit MSB dynamic lib SPARC Version 1, dynamically linked, not stripped
prog:          ELF 32-bit MSB executable SPARC Version 1, dynamically linked, not stripped
$
$ su
Password:
# mkdir -p /root/shared_library/
# cp libdllfile.so /root/shared_library/
# exit
$ ./prog
With the changes
library loaded
Inside function
$

Mail cannot open hyperlink of file located in windows server 2003

My macbook air has access to shared directory located in a windows server 2003 machine via smb mount. However, when I get an email containing a hyperlink of a file located in the shared directory, mail cannot open the link. Any ideas?

You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.

[SOLVED] "cannot open shared object file" but library is installed

I'm trying to run a digital logic simulation tool called "atanua" but I'm getting a missing library error:
$ atanua
/opt/atanua101120/atanua: error while loading shared libraries: libSDL_image-1.2.so.0: cannot open shared object file: No such file or directory
I tried re-installing both atanua (from AUR) and sdl_image (from repos) but the error remains.
$ ldd /opt/atanua101120/atanua | grep sdl_image
libSDL_image-1.2.so.0 => not found
I can find the "missing" library though:
$ locate libsdl_image
/usr/lib/libSDL_image-1.2.so.0
/usr/lib/libSDL_image-1.2.so.0.8.2
/usr/lib/libSDL_image.a
/usr/lib/libSDL_image.so
And so can the loader:
$ ldconfig -v | grep sdl_image
libSDL_image-1.2.so.0 -> libSDL_image.so
My initial thought is that the problem is a name mismatch between the program and the system, but I don't know the proper way to fix this. Does anyone know what I should try next?
Here's my system specs:
$ uname -a
Linux 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
Thanks for your help.
Last edited by spence (2011-10-30 20:22:07)

You're right. Some how [multilib] got disabled in my pacman.conf so I didn't spot a 32-bit version of the library. I uncommented the [multilib] lines, searched again, and found it. Problem solved. Thank you.

FRY-00001 Cannot Load Library iamodapp.so: iamodapp.so: cannot open shared

I am installing SAP running on top of an Oracle 10g database in a Red Hat Linux 4 . My database is up and solid. However, during the post Oracle DB installation scripts, I am bombing out with the following error:
FRY-00001 Cannot Load Library iamodapp.so: iamodapp.so: cannot open shared object file: No such file or directory
Anyone else have this problem and found a solution?
Thanks & regards
Arun Singh

Hi Arun,
1. Copy the installation media dvd to a directory on a files system
2. change directories into the sub-directory which contains the executable (sapinst)
3. run the command sapinst -extract
4. It will unpack the missing libraries into the same directory where you executed the command..
5. I copied these libraries to /oracle/<SID>/102_32/lib
6. Stop and restart the installation
Hope this helps.

I cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Comma

i cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command-
I tries and it doesnt work!!

What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Hotsync Shared Library Conflicts-Cannot Open

Similar Messages

Maybe you are looking for