House Bank number problem with BSP import

Hi,
I have a problem when i import an bank statement that i get an error that the house banknumber is not the same as in de import file. I believe the problem is that in de house bank definition in SAP there are dots (.) between the housebank number like 12.56.58.789 and in the import file on row :25 there are no dots between the number 125658789. Does anybody know how to solve this problem ? i tried something with the add-on format definition and find out that the field "AccountInfo" need some changes.
The expression that is used in the bfp file is (?<=:25:)[^\r\n]*(?=\r\n)
Can somebody help me?
THANKS
Mark

Hi Mark,
The rule for importing data from a bank statement is that house bank account defined in B1 and the data filled into account number field should match bit by bit. So in your case there are two options:
1. change the account number definition in B1 to remove all the dots.
2. if that's impossible, you have to change the BFP file via Format Definition add-on to insert the dots into the pure digit series. that could be done by assigning a mapping method to the account number field.
use concat() function and substring() function together. about the usage of the function ,you can refer to the online help of the tool.
Cheers,
Tedy

Similar Messages

Page number problem with document imported from MS Word.

I am a new Mac/Pages user and imported a Word document to use as a template to help me learn the Pages formatting nuances. This has worked well except for one problem. I have page numbers in the footer, but only the first digit of the page number shows up, i.e. 7,8,9,1,1...etc. I can't find a way to edit or delete the page number imported from Word. I can easily insert the page numbers through Pages but can't get rid of the imported pages numbers. Also, how do I prevent page 1 from receiving a page number?

Hi,
Others have reported difficulty removing page numbers from imported Word docs. I think it can be done, but it may not be worth the effort to repair the imported document when you can easily Select All and Copy the entire document and Paste it into a fresh Pages blank document without the improperly formatted, persistent Word page numbering.
Jerry

Problem with export / import

Hi everybody, I am having a problem with an import. I am doing an export with a value in an user exit:
EXPORT V_NLQNR = V_NLQNR TO MEMORY ID 'QUANTL'
And after I call import in another program:
IMPORT V_NLQNR = V_NLQNR FROM MEMORY ID 'QUANTL'.
But when I check the sy-subrc I am getting 4, so I don't get anything.
Does anybody why?? Is there a problem if I call the export from an user exit??
Thanks in advance.

Hello,
I think you have the right idea.
As a suggestion I would name my variables to make it clear which data is being
exported/imported. I would also use different names on the left and right side of the = sign.
Here is a working example from programs that I use:
In the first program
   EXPORT intercodata FROM g_data_exp TO MEMORY ID 'INTERCOWOS'.
     where g_data_exp is declared as a global variable
In the second program
   IMPORT intercodata TO g_data_imp FROM MEMORY ID 'INTERCOWOS'.
     where g_data_imp is declared as a global variable
The syntax that you use ( p1 = dobj1 ) should work as well, just make sure that the variable v_nlqnr to the right of the equal sign has a value before the export.
Regards
Greg Kern

Banking Information problem with italian iban

Hi, I have a problem with bank information for itunes connect books. When I insert ABI/CAB it's all ok but when i proceed to insert IBAN (i'm italian) and account number i receive error "Please enter a valid IBAN." WHY? my account number is long 12 and iban is correct without spaces underscore and similar
Thanks to all

Obviously you have the IBAN not correct.
"The IBAN consists of up to 34 alphanumeric characters, comprising a country code, two check digits and a long and detailed bank account-number."
In Italy the following is for the IBAN:
Italy
27
1a,10n,12c
ITkk xaaa aabb bbbc cccc cccc ccc
x = Check char (CIN)
a = National bank code (it:Associazione bancaria italiana or Codice ABI )
b = Branch code (it:Coordinate bancarie or CAB – Codice d'Avviamento Bancario)
c = Account number
IT (Italy)
27 characters total
see on your bank slips.
have fun
Lex

Problems with VLM Import Utility

Hello!
We I are using NI Volume License Manager 3.0 together with NI Volume License Manager Import Utility for importing users data.
The problem is that we can't import .xml data into VLM when the user types his name into Full Name field and his name contains characters like ČŠĆŽĐ čšćžđ. These characters are not correctly written into .xml file with VLM Import Utility and we have to manually replace them with Microsoft Expression Web before we can load .xml file into VLM server.
Do you have better solution? Is there some new version of NI Volume License Manager Import Utility that correctly handles non English characters?
Thank you
Bojan Gergič
Solved!
Go to Solution.

Hi
Sorry for not having a god news. This issue is a known bug (You can refere to it by a number CAR - Corrective Action Request - #320545). Unfortunatelly, I have no knowledge about a workaround for this.
Regards
Barbara

How to troubleshoot problems with Excel import

When I import a spreadsheet from Excel into Numbers, I get a notification window with a long list of errors encountered during the import. I can deal with the formatting issues, and I've managed to get rid of most of the "unsupported formulas" errors. However, I still have one stubborn "unsupported formulas" error. How do I get Numbers to identify which cell(s) have unsupported formulas that were removed on import from Excel?

There are some triangle symbols, but they refer to using a BOOLEAN as a number. That's not where the problem with unsupported formulas is, though. Numbers says that it replaced the cells that had unsupported formulas with the contents of the cell at the time of import, which I interpret as meaning that I should be looking at cells that don't contain formulas. My problem is that I have lots of cells that contain only numbers, and I somehow need to find that single cell that have an unsupported formula in the Excel version of the file.
Thanks for the suggestion, though.

Performance and usability problems with Illustrator imports

I am usually an enthusiast advocate for Adobe Software. As a UI/Interaction designer I regularly showcase your products as a shining example.
That's why I am somewhat frustrated about the Flash Catalyst Beta. I trust you guys to come out with SOMETHING GREAT eventually, but I have just spend an entire day with Catalyst and it was not particularly a joy. Couldn't you have released it a bit later to save me the frustration?
Situation:
- Medium size Adobe Illustrator CS4 import (10 screens/stages with 20-100 Illustrator objects per screen)
- Target : 800x600 embedded UI for medical product
- Illustrator file chosen as starting point
Performance / reliability problems include
- Crashing (Vista Core2Duo with 2gig of Ram)
- Super poor performance (wait 8 seconds to hide/show a layer)
- No show of thumbnail images anywhere
- No matching of document size (exact 800x600 from Illustrator became 800x599)
- Playing the file did not work
Usability issues
- Poor test display
- Poor match with Illustrator file (things seem to be rendered differently!)
- Window selecting does not work well
- No hand tool
- No ability to lock layers
- Cluttered interface (Not enough space for the "stage"or what you call it)
- No way to resize Illustrator elements from one of 9 edge/center points
- etc. etc.
Building a wireframe version from the ground up (with Illustrator import) seemed to work fine
I played around with the MS Blend beta for a while, and while the basic concept of your product is much more clear, the execution of the MS product in the beta phase was lightyears ahead in terms of stability and usability
I'm sure you can do better!
Koen

Koen,
Thank you for the detailed feedback about the performance problems you have experienced and your thoughts about features you would like. Let me respond to each of your points
Performance: We are aware that Catalyst doesn't perform well with large complex files. We have made many performance improvements since the current plublic beta, so you should find Catalyst more responsive with larger projects when the next beta is posted.
Here are a few things you can do to work around the performance issues you are seeing with the current beta:
- Consider rasterizing complex elements that don't need to scaled in Catalyst
- In Catalst turn complex artwork into optimized graphics using the "Convert to optimized graphics" in the float HUD (heads up display panel)
We have also found that particularly on Windows that Catalyst can run out of memory with large files. This area is also being worked on so stay tuned for the next beta.
Features:
- Poor test display [tv] Do you mean the design display doesn't match the appearance of the published project?
- Poor match with Illustrator file (things seem to be rendered differently!) [tv] we have fixed a lot of bugs here. Expect this to improve a lot in the next beta
- No hand tool - [tv] coming soon :-)
- No ability to lock layers [tv] coming soon :-)
- Cluttered interface (Not enough space for the "stage"or what you call it) [tv] Yes, Catalyst currently cannot dock/undock panels
- No way to resize Illustrator elements from one of 9 edge/center points [tv] This is also a known limitation. I agree it is useful
I hope the next beta comes closer to meeting your expectations. A lot of performance work and new features has been done since the last public posting, so look forward to beta II.
- Ty

Serial number problem with CS6

This morning, after running for over a year, the serial number that came with the copy of CS6 that I bought last August stopped working. I got an "invalid serial number error" and that was the end of CS6. I tried getting help from Adobe, but to no avail. The website was full of deadends or irrelevant pages. When I finally got into the chat cue, and I still don't know how I found it because I haven't been able to find it again, after an hour of waiting I had to go to work. With only 9 other people in line ahead of me.
So I've uninstalled and reinstalled CS6 twice, but it keeps telling me I have an invalid serial number. It is the serial number I registered with Adobe last year and that has worked since then. It is the same number that shows up when I look up "installed products" in my AdobeID account. Regardless, it is now inexplicably invalid. I found a post suggesting I run CC Cleaner. I did it--twice. I also adjusted file folder permissions on the Adobe program folder based on someone else's advice, but neither solved anything.
My impression is that it isn't an installation problem but that due to a mistake on Adobe's end, maybe due to an Adobe or MS auto update, my serial number now really is invalid, though it is paid for. This would mean there is nothing wrong with my installation, but just the serial number. With that in mind, and also that I don't want to deal with the aggravation any longer, I bit the bullet and bought...another copy of CS6. That's right, I will have paid twice for one copy because of a problem that is likely Adobe's fault. Congratulations Adobe! I came onto this forum so I could get an answer to the following question: who do I send the bill to? Who at Adobe reimburses their users when this kind of thing happens? If customer support had been better I might have been willing to hang in there while waiting for a fix, but it is obvious that none of the options available are made to assist customers so much as to drive them away. If I had known of an alternative software that could replace PS, Illustrator, and InDesign, I would have bought it instead.
AP

I know I won't get reimbursed, the question was rhetorical.
I bought the software through my university supplier of all our software, so it is legit. The point is that I paid for it, I should be able to use it. If it doesn't work, there should be a way to tell Adobe. I wouldn't be angry about it now if not for the fact I couldn't even send the information to Adobe.
This same thing happened with my copy of IBM SPSS and QVR's nVivo X10 software. The problem is that the way these software keys are installed happens to be very sensitive to system changes or even updates on the other end, at the developer's servers that maintain licenses. I understand why they have the keys, but the way they are implemented ruins the user experience for me. When I spend about two weeks every year fixing software glitches like this, that's my whole Christmas vacation , they need to improve the software because it is becoming more trouble than it is worth.
I wish there was a competitor for Adobe because I would love to spend my money there, even if it costs more, just to switch to another application and remind Adobe that their monopoly on the market could crumble if the customer experience starts going south.
AP

Problem with EXPORT IMPORT PROCESS in ApEx 3.1

Hi all:
I'm having a problem with the EXPORT IMPORT PROCESS in ApEx 3.1
When I export an application, and try to import it again. I get this error message
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 16, column 28: PLS-00103: Encountered the symbol &quot;牃慥整㈰㈯⼴〲㐰〠㨷㐵㈺′䵐&quot; when expecting one of the following: ( - + case mod new not null &lt;an identifier&gt; &lt;a double-quoted delimited-identifier&gt; &lt;a bind variable&gt; avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp in
As a workaround, I check the exported file and found this
wwv_flow_api.create_flow
p_documentation_banner=> 'ç‰ƒæ…¥æ•´â ¤ãˆ°ãˆ¯â¼´ã€²ã °ã€ ã¨·ã µãˆºâ€²äµ
And when I replace with this
p_documentation_banner=> ' ',
I can import the application without the error.
somebody knows why I have to do this??
Thank you all.
Nicolas.

Hi,
This issue seems to have been around for a while:
Re: Error importing file
I've had similar issues and made manual changes to the file to get it to install correctly. In my case, I got:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful.<br>ORA-02047: cannot join the distributed transaction in progress<br>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;There are several suggestions, if you follow that thread, about character sets or reviewing some of the line breaks within pl/sql code within your processes etc. Not sure what would work for you.

Problem with movies imported from iPad3

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

Getting Started with FCE - Problems with my imported files

Hi,
I'm trying to get started with Final Cut Express, but I'm experiencing lots of problems when I import my project from iMovie.
My project contains video, which I imported into iMovie at 960 x 540. It also contains some keynote animations, which I exported from Keynote as quicktime files.
When I export my files to FCE, I instantly get problems.
1) When I add the imported file to the sequence, I get an "Attention the clip does not match the sequence's setting or any of your sequence settings" error.
2) Whether I choose to translate my settings or not, I try to play the video in the timeline, but there is a continuous beeping sound, no audio from my video and when it hits the keynote animations, it just says "unrendered" or "media offline".
Please can you offer any advice on how I can get started with FCE more successfully.
Thanks!

Hi(Bonjour)!
(please specify iMovie and FCE version)
Well, your sequence settings in FCE should be DV-PAL 48 Khz.
Create a new sequence.
From iMovie and Keynote, export your movie with quicktime conversion andd select DV-PAL 48 kHz (*And Not* DV Stream...). This material should play without rendering because his format and codec match the sequence's codec.
Import your files and everything should be OK.
Michel Boissonneault
The audio should be AIFF 48 kHz 16 bit linear PCM

Problem with the imported video clips

Hi! I'm very new to Premiere Pro, so please don't scold me :)
I have a video file (.AVI) that I want to remove the audio from, and insert a new audio track.
Here's my problem: When I import the AVI file into Premiere, and double-click it to preview it, it is really glitchy. The video is 1 minute long. During ~5 seconds in the very beginning, the whole video's "video" track is played, extremely speeded up (It plays through it all). The rest of the video consists of a freezed frame, and the audio is played in normal pace.
I do not know which codec the AVI-file is encoded with, is this relevant?
When I restarted Premiere the first time, it told me that it had to download codecs. I pressed OK and the codecs was downloaded and installed okay, but the problem remains.
I copied the .AVI-file directly from my camera (Canon IXUS 700 I believe).
When I play the original AVI file with VLC, everything runs perfectly with audio and video.
I'm totally clueless, anyone have a clue how I can solve this?
Any help at all appreciated, thanks in advance!

>I do not know which codec the AVI-file is encoded with, is this relevant?
Very relevant. Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Problems with .aaf import in premiere pro cc

Hi,
So I'm having problems with importing an aaf file into premiere. The weird thing is it was working about a week and a bit ago, then stopped. I can't work out why, to my knowledge nothing has changed but if someone could point me in the right direction that would be massively appreciated.
I'm using premiere pro cc and avid media composer. I'm trying to export from avid and import into premiere. I'm creating an .aaf file in avid and trying to import into premiere. When I press import, the progress bar comes up and gets stuck instantly. I can close the aaf import window, but then it leaves the import files progress bar still up and premiere stops responding completely.
At first it worked fine, within premiere I can still use the aaf files already imported, I just can't import more (I can't even import the files I had previously done successfully). I just can't work out why?
Any help would be massively appreciated,
Thanks,
Jack

Hi Jack,
Please check the below Forum thread and roll back to the Initial version 7.0 of Premiere Pro CC. You can choose to update Premiere Pro CC to the desired version from the below links.
http://forums.adobe.com/message/5827476
Updates:
For MAC:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Macintosh
For Windows:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
Regards,
Vinay

Problems with event import on iMovie 10.0.3

My complete movie libraries works fine with iMovie 9.0.9. There are no other malfunctions. The filessystem is clean.
After upgrading to iMovie 10.0.3 the initial startup event and project update process fails on serveral older events and I have problems to import this events folders.
Why does V. 10.0.3 has problems with some older events ? What to do to get this files properly ?
Thanks in advance for any help.
Alexander

when i try to move them together this happens..?

Problem with the importing wizard

Hei,
I have a dll which I want to import to the Labview project. So, I decided ti use the import wizard, but when parsing the header file, Labview freezes. I am using a couple of structures (3) and a handle. I have also read that the wizard has problems when dealing with complex data. What would be best solution for adding it to the project? To in a way "unbundle" the struct and then create a many simple variables and then parsed to dll. (This would be a pain)
How to deal with the handle or will wizard easy understand that?
I am really looking for a painless solution
thanks for the help

Can you post the header file for the DLL?
Through a process of trial and error you could determine which functions causes problems with the wizard (comment out half the functions, attempt to import, repeat) and then manually create the LabVIEW VIs for the troublesome ones. If there aren't too many functions, you could do it all by hand, which isn't that hard if you have some understanding of C (and if you don't, you'll undoubtedly have other problems when the wizard doesn't do the right thing).

House Bank number problem with BSP import

Similar Messages

Maybe you are looking for