How 2 Set the logic for report 2 run 1st of everymonth......

Hi Experts,
i ve developd a HR-ABAP report in that Some part of code will Mon-Fri, Excluding Public holidays and sat & sundays...( i.e no public holidays and no sat & sundays)
   and some part of should Run on 1st of everymonth.... but 2 parts of code should be in same report..
How can set the logic to run the report respective times....
Thanks in Advance....
sudeer.

you can code this but need some good expertise on fm's  , date handling techniques and subroutine call coding.
1.
to make the code run only on 1st of every month
capture the rundate of ur prog .. take value of  sy-datum
ex.. 01.xx.yyyy
or date std will be yyyymmdd so check for dd = 01 ..
so per logic first two chars show that its first of any month in any year ..
if yes
execute the logic for the first of every month ..
endif.
2.
where the code needs to be run on mon-fri and not on public holidays / sun / sat ..
first fetch the day based on date .. like mon or tue or wed .. except sat and sun..
second check whether if m-t-w-th-fr if any of them is  a holiday or not
u need to check the date in the calender list like tholi thoc and .. to check whether that is a holiday or not ..
coming to sat and sundays .. u need to check the day for date using function modules and build the logic ...
br,
vijay..

Similar Messages

  • How to control the permission for reports in share folder?

    Hi Experts,
    In OBIEE 11.1.1.6.0.
    I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
    So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
    How to control the permission for reports in share folder? Thanks for your help.
    Note: Dashboard pages have whole sales reports for showing.

    Hi User,
    1. Give access to the users for all reports.
    2. Give No Access to Retail Folder
    3. GIve read or full access to dashboard folder.
    To set the permission , click on the object/folder bottom left you will find Permission. you set there.
    Mark if correct,
    fiaz

  • How to enable root on mac on 10.9.2 and how to set the password for the same ?

    how to enable root on mac on 10.9.2 and how to set the password for the same ?

    http://support.apple.com/kb/ht1528
    Follow the steps for Lion.
    But, why are you doing this? I've never found the need to do that.

  • How to write the logic for extending Idocs...

    Hi,
          Can anybody pls explain how to write the logic for extending IDOCs with an example...
          Good suggestions can be appreciated..
    Regards,
    Ram

    Hi Ram,
    Generally the IDoc user exit is called at the following places:
      1) When the control record is read.
      2) After each and every segment in the data record
      3) At the end of the data segment processing.
    The IDoc user exit interface generally imports IDOC_DATA (data record internal table) table. Now the data records in the internal table should appear in the same order as maintained while defining IDoc structure (WE30 transaction). For SAP standard segment SAP code will take care of this. For extended segment you will have to take care of this aspect by appending the Z-segment in the IDOC_DATA table.
    You can do this by:
             looping at IDOC_DATA table:
                 - Do a case-endcase fo IDOC_DATA-SEGNAM (This stores the segment 
                   structure as per the hierarchy).
                 - Within the case for "Z-segment" you can write the logic for appending
                   the Z-segment to IDOC_DATA-SDATA.
    Hope this gives some clue.
    Regards,
    Gajendra.

  • How to set the background for all components?

    hi
    Does anybody know how to set the DEFAULT background color in an application.. I need it because in jdk 1.3 the default bgcolor is grey and in 1.5 it is white.. and I wish white as well.. so to make it also white in jdk 1.3 I need to use the (a bit annoying) anyContainer.setBackground( Color.white ); and these are lots in my app.. So my question is: is there such an overall class with a function (say UIManager.setComponentsBackground( Color color ) ) for such a purpose?
    any tip or link would be greatly appreciated

    Does anybody know how to set the DEFAULT background color in an applicationthis might get you close
    import java.awt.*;
    import javax.swing.*;
    import java.util.Enumeration;
    class ApplicationColor extends JFrame
      public ApplicationColor()
        setApplicationColor(Color.RED);
        setLocation(400,300);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        JPanel jp = new JPanel(new BorderLayout());
        jp.add(new JTextField("I'm a textfield"),BorderLayout.NORTH);
        jp.add(new JComboBox(new String[]{"abc","123"}),BorderLayout.CENTER);
        jp.add(new JButton("I'm a button"),BorderLayout.SOUTH);
        getContentPane().add(jp);
        pack();
      public void setApplicationColor(Color color)
        Enumeration enum = UIManager.getDefaults().keys();
        while(enum.hasMoreElements())
          Object key = enum.nextElement();
          Object value = UIManager.get(key);
          if (value instanceof Color)
            if(((String)key).indexOf("background") > -1)
              UIManager.put(key, color);
      public static void main(String[] args){new ApplicationColor().setVisible(true);}
    }

  • How to set the conditions for item deletion approval workflow?

    Hi,
    I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
     process completes .
    Change the behavior of the single task: 1.when a task is Pending.
    [I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
    My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
    When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
    When user deletes an item: 1. intimation mail.
    How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
    Thanks,
    Praveen ji

    Hi,
    According to your post, my understanding is that you wanted to start approval workflow when item deleted.
    You should first make some changes to trigger the workflow when you delete the item.
    You can use the Event Receiver to achieve it.
    In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
    http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
    You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
    http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • How to set the icon for the entire application with JFrame.setIconImage

    I set the icon on the main frame using JFrame.setIconImage(). The icon is shown properly in the main frame.
    If more JFrames are opened from the main frame, the newly opened JFrames also show the icon.
    However if JDialogs are opended, in some cases the icon set on the main frame is shown and in other cases the coffee cup.
    What is JFrame.setIconImage() expected to do? Setting the icon for a single JFrame or the entire application?
    How can I set the icon for the entire application?
    How can I set the icon for JDialogs?
    Thank you

    In order for your dialogs to use the same icon as the frame, you must parent the dialogs to the frame which has the custom icon.
    See the following thread for more information: http://forum.java.sun.com/thread.jsp?forum=57&thread=362542
    cheers,
    Greg

  • How to set the size for height of iView tray?

    Hi,
    I have created a ABAP webdynpro component and integrated this comp with iView. Then i integrated iView into Page in portal. That is working fine.
    But the size of tray/window which is displayed in the page is very small.
    How to increase the height of that Tray/window/iView containing my component?

    Hi,
    By changing the maximum automatic height and Minimum automatic height property of the iview you can set the size for height of your iview.
    to do this follow the setps:
    goto content administrator -> portal content -> your folder where you created your iview or directly to your iview -> right click -> open -> object,
    and now in property category choose appearance-Size from the drop down menu and set the above properties to your required height.
    if you want the end user to modify this property set the property to read/write .
    *********please reward points if the information is helpful to you********************

  • How to set the status for a customer plan to RELEASED.

    Hello all,
    I created a program for mass creation of customer plans. But after the creation of a plan, the status should be set to released, so that the user can go about creating the trade promotions for the customer plan. Can anybody tell me how to set the status of a customer plan to RELEASED.
    Thanks,
    Disha.

    Hi Clemens,
    I am not talking about doing it in the CRM_UI transaction..I created a program..which would create the customer plans based on the planning account data provided. I was succesfull in creating the plans, but I am not knowing how to release it, if only anybody can tell me about a Function module or method, which can help me do this, that would be great
    Thanks,
    Disha.

  • How to set the width for a selectManyShuttle component

    Hi,
    I'm using selectManyShuttle component from Oracle ADF Core and some of the items in the showing list are long, therefore the width of selectManyShuttle expands the page. How to set the width property for selectManyShuttle component? After that does selectManyShuttle provide horizontal scrollbar as well?
    Thanks in advance,
    lapi
    Message was edited by:
    [email protected]
    Message was edited by:
    [email protected]

    Solution here:
    Re: ADF Faces Scrollable Panel or Scroll Bar inside a component
    Regards
    Grant

  • How to set the #HELPLINK# for a page

    I tried to find, how or where can I set the #HELPLINK# for each individual page/application component?

    Click on --
    Edit link for Page> Click "Edit Default" link on Banner >
    Under the "Banner Links"
    provide value something like this:
    Label = Help
    URL = /pls/portal30/docs/myhelp.html
    Icon = U can upload any icon here.
    For Application Components = See the Second Last tab on "Edit Component".
    Thanx,
    Chetan.

  • How to sets the Reason for Rejection of the Open Sales Order Lines

    Hello gurus,
              I want to set the Reason for Rejection of the Open Sales Order Lines, Case is like :
    If current date is exeed the Auto Void Confirmed Back Order Days(for item level) +  date (last responding from customer), then reason for rejection should be set, So i want the logic to find out the date is exceed or not.
    Thanks
    Anjana

    Hello anjana,
       Actually your question is some confusing, but if u want to get eldest change as active sales order then logic is as follows:
    1.  On base of OBJNR u have to get UDATE from JCDS table
    2. then write logic as:
    SORT i_jcds BY objnr stat chgnr DESCENDING.
          LOOP AT i_jcds INTO wa_jcds1.
            CLEAR lv_stat.
            lv_stat = wa_jcds1-stat.
            AT NEW objnr.
              AT NEW stat.
                CLEAR: wa_tab.
                wa_tab-objnr = wa_jcds1-objnr.
                wa_tab-stat = lv_stat.
              ENDAT.
            ENDAT.
            IF wa_jcds1-inact = 'X'.
              CLEAR lv_tabix.
              IF sy-tabix > 1.
                lv_tabix = sy-tabix - 1.
              ELSE.
                lv_tabix = 1.
              ENDIF.
              READ TABLE i_jcds INTO wa_jcds2 INDEX lv_tabix.
              IF sy-subrc = 0.
                wa_tab-chgnr = wa_jcds2-chgnr.
                wa_tab-udate = wa_jcds2-udate.
                wa_tab-utime = wa_jcds2-utime.
                APPEND wa_tab TO i_tab.
              ENDIF.
              CONTINUE.
            ELSE.
              wa_tab-chgnr = wa_jcds1-chgnr.
              wa_tab-udate = wa_jcds1-udate.
              wa_tab-utime = wa_jcds1-utime.
            ENDIF.
            AT END OF objnr .
              AT END OF stat.
                APPEND wa_tab TO i_tab.
              ENDAT.
            ENDAT.
          ENDLOOP.
          DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr stat.
          SORT i_tab BY objnr stat udate utime.
          DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr.
    3. now in i_tab table u'll get eldest UDATE
    Hope its work for u.
    Thanks & Regards,
    Sumit Joshi

  • How to set the header for second page

    Hello all,
    I'm trying to set different header for first page and page number should starts from second page.
    Below is the sample code to set the header for each and every page.
    DECLARE
    hApplication OLE2.OBJ_TYPE;
    hWindow OLE2.OBJ_TYPE;
    hPane OLE2.OBJ_TYPE;
    hView OLE2.OBJ_TYPE;
    hDocuments OLE2.OBJ_TYPE;
    hDocument OLE2.OBJ_TYPE;
    hSelection OLE2.OBJ_TYPE;
    hParagraphFormat OLE2.OBJ_TYPE;
    hRange OLE2.OBJ_TYPE;
    hFields OLE2.OBJ_TYPE;
    hFont OLE2.OBJ_TYPE;
    args OLE2.LIST_TYPE;
    wdAlignParagraphLeft CONSTANT number(3) := 0;
    wdAlignParagraphCenter CONSTANT number(3) := 1;
    wdAlignParagraphRight CONSTANT number(3) := 2;
    wdSeekCurrentPageHeader CONSTANT number(3) := 9;
    wdSeekCurrentPageFooter CONSTANT number(3) := 10;
    wdSeekMainDocument CONSTANT number(3) := 0;
    wdFieldPage CONSTANT number(3) := 33;
    wdFieldNumPages CONSTANT number(3) := 26;
    wdPageBreak CONSTANT number(3) := 7;
    wdStory CONSTANT number(3) := 6;
    myTab CONSTANT varchar2(1) := chr(9);
    myBlue CONSTANT number(8) := 16711680; --FF0000
    myGreen CONSTANT number(8) := 65280; --00FF00
    myRed CONSTANT number(8) := 255; --0000FF
    myDkGreen CONSTANT number(8) := 32768; --008000
    myBlack CONSTANT number(8) := 0; --000000
    myText varchar2(2000);
    BEGIN
    hApplication:=OLE2.CREATE_OBJ('Word.Application');
    OLE2.SET_PROPERTY(hApplication, 'Visible', 1);
    hDocuments := OLE2.GET_OBJ_PROPERTY(hApplication, 'Documents');
    hDocument := OLE2.INVOKE_OBJ(hDocuments, 'Add');
    -------- Create Header and Footer --------
    hWindow := OLE2.GET_OBJ_PROPERTY(hApplication, 'ActiveWindow');
    hPane := OLE2.GET_OBJ_PROPERTY(hWindow, 'ActivePane' );
    hView := OLE2.GET_OBJ_PROPERTY(hPane, 'View' );
    ---- Header Section ---
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageHeader);
    hSelection := OLE2.GET_OBJ_PROPERTY(hApplication, 'Selection');
    hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
    OLE2.SET_PROPERTY(hFont, 'Name', 'Times New Roman');
    OLE2.SET_PROPERTY(hFont, 'Size', 10);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', MyBlue );
    hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
    OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
    OLE2.RELEASE_OBJ(hParagraphFormat);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'This is a');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.INVOKE(hSelection, 'TypeParagraph');
    OLE2.SET_PROPERTY(hFont, 'Size', 16);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', MyDkGreen );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'Test Header');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    ---- Footer Section ----
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageFooter);
    hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
    OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
    OLE2.RELEASE_OBJ(hParagraphFormat);
    hFields := OLE2.GET_OBJ_PROPERTY(hSelection, 'Fields');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'Page ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG_OBJ(args, hRange);
    OLE2.ADD_ARG(args, wdFieldPage);
    OLE2.INVOKE(hFields, 'Add', args );
    OLE2.DESTROY_ARGLIST(args);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, ' of ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG_OBJ(args, hRange);
    OLE2.ADD_ARG(args, wdFieldNumPages);
    OLE2.INVOKE(hFields, 'Add', args );
    OLE2.DESTROY_ARGLIST(args);
    OLE2.RELEASE_OBJ(hRange);
    OLE2.RELEASE_OBJ(hFields);
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekMainDocument);
    OLE2.RELEASE_OBJ(hView);
    OLE2.RELEASE_OBJ(hPane);
    OLE2.RELEASE_OBJ(hWindow);
    -------- Insert Text --------
    hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
    OLE2.SET_PROPERTY(hFont, 'Name', 'Arial');
    OLE2.SET_PROPERTY(hFont, 'Size', 12);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE );
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    OLE2.INVOKE(hSelection, 'TypeParagraph');
    myText := myTab || 'This text is on the ';
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, myText);
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', myRed);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'first ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'page.');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, wdPageBreak);
    OLE2.INVOKE(hSelection, 'InsertBreak', args);
    OLE2.DESTROY_ARGLIST(args);
    ----page 2
    myText := myTab || 'This text is on the ';
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, myText );
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlue);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'second ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'page.');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    ---- go to the top of the first page
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, wdStory);
    OLE2.INVOKE(hSelection, 'HomeKey', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.RELEASE_OBJ(hFont);
    OLE2.RELEASE_OBJ(hSelection);
    OLE2.RELEASE_OBJ(hDocument);
    OLE2.RELEASE_OBJ(hDocuments);
    OLE2.RELEASE_OBJ(hApplication);
    END;
    Please help me out
    Thanks,
    Bhavana

    Click on --
    Edit link for Page> Click "Edit Default" link on Banner >
    Under the "Banner Links"
    provide value something like this:
    Label = Help
    URL = /pls/portal30/docs/myhelp.html
    Icon = U can upload any icon here.
    For Application Components = See the Second Last tab on "Edit Component".
    Thanx,
    Chetan.

  • How to set the classpath for external .jar files after importing?

    Hi techs,
    How to set the classpath in WSAD5.1.2 after importing the .jar file to the WEB-INF/lib folder.
    urgent

    I got it.
    after importing the jar file to the perspective,we need to right click on project name, go to proprties,
    goto java build path,
    there we need to include the external jar files.

  • How to set the value for Power Cost in SCCM reports in Euro's?

    Hello,
    I have found out how to change the value of the 'cost' of the KWh for these reports (reporting) . But ther original settings where displayed and set in USD($) with some other values. I have of course changed the USD to EUR (€) in my case, but my question
    is: how do i know what I have to fill in in the field : costOfKwh, according my manager for my organisation it is in euro's 5,9 euroct/Kwh
    Do I have to fill in 5,9 or 0,59 or 0,059 ???
    Then also ther are some other values set in the original reports, like :
    KwhConsumptionDesktopComputerOn value = 0,07
    KwhConsumptionLaptopComputerOn  value = 0,02
    KwhConsumptionDesktopMonitorOn    value = 0,03
    Do i have to leave this settings ?

    Yes, I know this is an old post, I’m just trying to clean them up.
    The default of 0.09 is 9 cents/ KwH so  I’m assume that 5.9 cent (euro) so that you bet 0.059
    BTW if you have edit the report to change $ to € then you can also set eh default value to whatever the current power cost is too.
    http://www.enhansoft.com/

Maybe you are looking for

  • How do I get music to stop in Safari from a website that has been closed?

    I have played a mahjong game in www.mahjonggames.com which has accompanying music, using my Safari browser.  When I close the site, the music doesn't stop.  I have cleared the caches and that didn't help.  Any suggestions?

  • Customer special stock

    Hi all, I want to define a customer special stock. Can you tell me where I can assigned special stock to specific customers for consignment stock process ? Thanks.

  • Import stat.Warenummer in GTS 10.0

    Hello, we made an export from the ERP SAP of the material to upload stat.Warennumer in GTS inital. Where in GTS 10.0 can I upload the data file. Thanks for help. Regards Jörg

  • IPhone screen content to Apple Display?

    Whist using Safari on the Apple iPhone 3G, is it possible or is there in existence a method (a gadget/cable) to bridge/mirror iPhone screen content onto a separate display panel? Therefore making it easier to view/read Web page content and page text.

  • Why won't ITunes update to 12.1

    I've tried updating ITunes for 3 days now.    In the history it shows that it has updated numbers times, but it also shows the update still needs to be done.    When I check ITunes - it does not reflect the update.