How are the files in the hiddenLibrary Message Attachments folder organized?

In the Messages folder in the hidden Library folder (While in Finder, hold down the Alt (Option) key and click on Go in the menu), there is a file called Attachments. I don't understand how the MacBook organizes the photo/videos that has been sent and recieved via iMessage.
The media files are randomly jumbled all over the place and not organized by the date that the media files were sent/recieved. The files are sorted by Date Added. Each file within the files of the 4th column look like those in the following columns.
I want to know how the images are organized and how to see them all chronologically!
Thank you

Get into list view, sort by date.

Similar Messages

HT201596 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive. ALL my files are on the 4TB. How do i get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes THX .

Hi, 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive as I ran pout of space. ALL my files are on copied on to the 4TB drive . How do I get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes THX .

Select the desired location in preferences, then consolidate the media files to it.
iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507 - Unfortunately this is misnamed. It should say "Change where your media files but not where your library files are stored" - more information at: https://discussions.apple.com/message/22026652#22026652 - and steps 5-8 in https://discussions.apple.com/message/24491967#24491967

How to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version). You get an image-format file _only_ when you export an Image. You select the file name (usually a scheme) when you create an image-format file (that is, when you export). Look under "Aperture→Presets→File Naming" for built-in Presets. You can, of course, create your own or customize any provided.
The Preset is applied to only the file newly created by your "export" command. It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

Hi, did you try iTunes>File>Import?

How can I copy my Itunes-library from Iphone to my new Mac, as I forgot to copy the files from the old PC, and now it is to late. I only have music on my Iphone.

How can I copy my Itunes-library from Iphone to my new Mac, as I forgot to copy the files from the old PC, and now it is to late. I only have music on my Iphone4. Thank you.
gunnarfromhovik

For iTunes purchases only..
Connect the iPhone to your Mac, launch iTunes.
If you haven't done this yet, go to the iTunes menu bar click Store / Authorize This Computer
Now from the iTunes menu bar again, click File / Transfer Purchases From...

How to Upload the files into the SiteAssets Library by SharePoint Hosted App Model

I want to upload the Jquery and supported files in to the Site Assest library by SharePoint Hosted Apps,
I have created a SharePoint Hosted App, added the files in the Modules
<Module Name="ZoneTabsFiles" Url="SiteAssets">
<File Path="ZoneTabsFiles\jquery-1.11.2.min.js" Url="jquery-1.11.2.min.js" ReplaceContent="TRUE" />
<File Path="ZoneTabsFiles\jquery-ui.css" Url="jquery-ui.css" ReplaceContent="TRUE" />
<File Path="ZoneTabsFiles\jquery-ui.min.js" Url="jquery-ui.min.js" ReplaceContent="TRUE" />
<File Path="ZoneTabsFiles\ZoneTabs.js" Url="ZoneTabs.js" ReplaceContent="TRUE" />
</Module>
The Apps is successfully getting activated but the files are not visible,
Similarly I want to upload the .webpart file to webpart catalogs.
<Module Name="ZoneTabsWebpart" List="113" Url="_catalogs/wp" Path="lists\wplib" RootWebOnly="TRUE">
<File Url="ZoneTabs.webpart" ReplaceContent="TRUE" />
</Module>
The Functionality I can achieve Provider Hosted app, but Can it be done by SharePoint Hosted apps,
Currently the app has the permission of Full Control on Site and Web
Thanks in advance

Hello Ashok,
you can use JSOM to provision the webpart files in SharePoint hosted app.
Please see the below article for more details.
http://www.sharepointnutsandbolts.com/2013/05/sp2013-host-web-apps-provisioning-files.html
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

How to open files from the SAP DMS (DOC Mgt. System) ?

Hello All,
 I making the Transaction CV04N in BSP.
When I execute this CV04N I should give a DOC Nr and the list is generated for this DOC.Now in the List if I select one Record and then Press Display Icon then the content of this list is opened in a new window in it's respective format (PDF,Word,GIF,Image file etc).These are stored in the SAP DMS.
 I want to open a file from this SAP DMS .
This can be done in ABAP using the standard FMs. But in BSP we can't use these FMs as it will call a screen.
The Fm which I'm using is " DOCUMENT_SHOW_DIRECT ".
In Report prog. To this FM I'll pass the
a, DOC Type
b, DOC Number
c, Document part and
d, Document version.
then It'll directly open a PDF file in a new window.
But in BSP how should I acheive this as the FM calls a screen internally.
The content of the documents are stored in the DMS. Is there any TCODE or Table to get the files from the DMS ?
How should I proceed ? can any one help me out.....
Regards,
Deepu.K

Hello All,
 I found the FM : CVAPI_DOC_OPEN_CAD which wil return the file path.
But when I execute this in my BSP since the FM internally calls a screen it fails.
But can anyone tell me the alternative for this.
Should I create a FM omitting the GUI code ?
I found one more thread which says that I can use classes starting with cl_gos*.
But all the classes use a gui.
Dowload a document from R/3 DMS to BSP page
Am I wrong in the interpretation of the logic from the above thread ?
Please suggest me .
I too went thru the BSP Applications CVAW_ENTIRE, CVAW_DOCUMENT_DISPLAY.
But these are used to display only the thumbnails.
There is no code for displaying other formats like PDF,XLS etc.
Please correct me if I'm wrong and let me know the correct path to solve my problem.
Regards,
Deepu.K

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I delete all the files in the Adobe CS4 Master Collection from my machine?

How can I delete all the files in the Adobe CS4 Master Collection from my machine. I have tried Control Panel but it will not do anything, there are no error messages, it is like as if it is ignoring my instruction. Why should it be so difficult to delete programs one does not want. Any ideas please.

Moved from Cloud forum to Downloading, Installing forum
Try running the Adobe Cleaner Tool
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
Or is the version of iTunes (within recent updates) not an issue when restoring a library?
Using Windows 7.
Any help please?

From the top of the page where the scripts live...
The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
tt2

HT1386 I have a new computer with windows 8.1. I want to add the 52 Gb of music now on my old ipod to itunes on the computer. I don't want to wipe out the files on the ipod by syncing to the new computer which has no music files on it yet! How can I do

I have a new computer with windows 8.1. I want to add the 52 Gb of music now on my old ipod to itunes on the computer. I don't want to wipe out the files on the ipod by syncing to the new computer which has no music files on it yet! How can I do this?

Apparently I wasn't clear. The music on my ipod is but a subset of all the music on my external hard drives. I want to import only the songs and playlists from my existing ipod into the itunes library on my new computer, which currently has no music or playlists. How can I do this?

Cannot open the file because the open options are incorrect

I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
i //CODE BELOW
i //allows the user to select an folder full of images
b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
b var fileList = inputFolder.getFiles();
b var tempRef = app.open(tempName);
b for (var i = 0; i < fileList.length; i++)
b {
b var tempName = fileList[i];
b var tempStringName = fileList[i].toString();
i //used to check if the file in the directory does in fact contain the .png extension
b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
b {
i //setting reference to opened docuement PNG file
i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
b var tempRef = app.open(tempName);
i //setting a tempName variable to the PNG file name
b var tempName = app.activeDocument.name;
i //setting reference to the active layer in the file
b var graphicLayer = app.activeDocument.activeLayer;
i //setting the PNG layer name to the PNG file
b tempRef.layers[0].name = tempName;
i //duplicating the image onto the opened Photoshop file
b tempRef.layers[0].duplicate(backRef);
i //closing the original PNG file without saving
b tempRef.close(SaveOptions.DONOTSAVECHANGES);
b }
b }

It looks as if the folder contains non Photoshop files, one way around the problem would be to change
var fileList = inputFolder.getFiles();
To specify the file types you want to process IE:
var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

Where can I find the file where the static mapping allocations of the DHCP server are stored?

In our company we are using DHCP to assign static ip addresses to our clients.
Now we are forced to change the ip address range. To prevent changing each allocation
of mac-address to ip-address manually with the admin tool i would like to change the allocation
in the file where the allocations are saved. The reason ist that i just have to use copy & paste for all
the allocations.
So how is the file named and where can I find the file where
the static mapping allocations of the DHCP server are stored? Is it just an ASCII file?
Must i note anything when i change the file manually?

From man bootpd:
BOOTP/DHCP STATIC BINDINGS
     Static IP address to ethernet address bindings are stored in the /etc/bootptab file and in Open Directory. Bindings specified in the /etc/bootptab file take precedence over those in Open Directory.
     See bootptab(5) for more information about the /etc/bootptab file.
     For Open Directory, bootpd looks at the /Computers records for the following properties:
/etc/bootptab is a standard text file, while the records in Open Directory can be manipulated either through the command line, or via Workgroup Manager.

How to do CHECK IN the files for the document?

Hi ,
By using BAPI_DOCUMENT_CHECKIN2 Function module I am uploading the Files for the Document number.
My problem is - After uploading the files to the document number the files are not in check in status.
I want the files to be checked in after uploading the from the FM.
Can anyone tell me what I am missing ? How to do check in the files.
I am passing the following values to FM.
      ls_files-SOURCEDATACARRIER = ls_file-DATA_CARRIER.
      ls_files-WSAPPLICATION     = ls_file-application.
      ls_files-DESCRIPTION       = ls_file-file_desc.
      ls_files-STORAGECATEGORY   = ls_file-category.
      ls_files-DOCFILE           = ls_file-doc_path.
      ls_files-CHECKEDIN         = 'X'.
    CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
      EXPORTING
        DOCUMENTTYPE            = ls_file_data-dokar
        DOCUMENTNUMBER          = ls_file_data-doknr
        DOCUMENTPART            = ls_file_data-doktl
        DOCUMENTVERSION         = ls_file_data-dokvr
      IMPORTING
        RETURN                  = ls_return
      TABLES
        DOCUMENTFILES           = lt_files
    COMPONENTS              =
    DOCUMENTSTRUCTURE       =
I appriciate you response on this.
Thanks in advance.

Hi,
Check the values you are passing into ls_files .
you dont need to pass checkedin = 'X'.
and check the storagecategory field - this should not be blnak.
files-SOURCEDATACARRIER = lsfile-DATA_CARRIER.
ls_files-WSAPPLICATION = ls_file-application.
ls_files-DESCRIPTION = ls_file-file_desc.
ls_files-STORAGECATEGORY = ls_file-category.
ls_files-DOCFILE = ls_file-doc_path.
ls_files-CHECKEDIN = 'X'.
This FM will work. No issues just check the values you are psssing into this LS_FILES structure.
Rest of the fields are corect.
Thanks,
Murali.

How are the files in the *hidden*Library Message Attachments folder organized?

Similar Messages

Maybe you are looking for

How are the files in the hiddenLibrary Message Attachments folder organized?