How best to configure the memory allocation

Hi,
Anyone could advise how best to configure the memory allocation by setting up
the value for
-Xms
-Xmx
-XX=NewSize
-XX=MaxNewSize
-XX:SurvivorRate
-XX:MaxPermSize
for weblogic Express 8.1 and the server has about 4G RAM ?
Thanks.

Hi Chandra,
"Chandra" <[email protected]> wrote in message news:[email protected]..
Anyone could advise how best to configure the memory allocation by setting up
the value for
-Xms
-XmxSet -Xms == Xmx == 512m
-XX=NewSize
-XX=MaxNewSize
-XX:SurvivorRate
-XX:MaxPermSizeSet -XX:MaxPermSize == 64m
and see how it goes.
for weblogic Express 8.1 and the server has about 4G RAM ?This is way too much for a single weblogic instance. Normally 512-1024Mb
is enough. I'd consider partitioning it to multiple instances with that much
of memory. Lesser memory means faster GC.
HTH
Regards,
Slava Imeshev

Similar Messages

  • How can I get the memory allocation info of a java thread?

    Now I am going to write a program to monitor the execution condition of the java threads. But it seems that the classes in standard edition of JDK does not provide facilities to get the information such as the memory allocation and CPU time of a running thread. How can I do with it? Can I use JNI or JVMDI to get them? If it could do, how?

    Thanks a lot. I just browsed the specification of jvmpi. It is interesting and it seems that I can get the information I need. However, if I want to get the information in my program, I mean, if I want to build a class which may use JNI method to invoke the function written with JVMPI, and then forward the data to other upper layer objects, can it be done?

  • Hi how can i know the memory allocation of occurs 10 or 100

    hii
    experts,
    how can i know how much memory is being allocated for for occurs n(10 ,100)
    for an internal table declaration.is there any tcode to know that??
    plz help.
    thank you

    Hi,
    welcome to sdn,
    Occurs 10 means the internal table allocates space for 10 rows initially....after filling these rows it allocates for the next 10 lines...similarly occurs 100.
    But if you give occurs 0 ,the internal table allocates 8kb space initially...
    these are the major difference....i think you can check the memory allocation of the internal table in the debugging mode instead of using a separate transaction...
    <b>Reward points if helpful,</b>
    regards,
    Jinesh

  • How can we configure the width of the table in SAP DB

    Hello sirs,
    How can we configure the width of the table in SAP DB? (<b>i.e to specify the total width of the sum of all columns</b>). I need to change the default value of table width for adding fields with biggger sizes...
    With best regards,
    Sudheesh....

    Hi,
      The restrictions for using SAPDB are available at the following link http://dev.mysql.com/doc/maxdb/en/f6/069940ccd42a54e10000000a1550b0/content.htm
      The 'internal length of the table' is 8088 bytes, which intern maps to the column width attribute.
    Can we change the column width?
    The answer is 'NO'.
    check the general Column width error (-1115) at link below where it is specified that the column width can be altered http://dev.mysql.com/doc/maxdb/en/bb/57f18204fd11d2a96c00a0c9449261/content.htm
    Refer link below for more details on the width of each column (based on the datatype associated with the column). http://orgs.man.ac.uk/documentation/mysql/manual_Column_types.html
    So we will have to judiciously look into the boundary values for each column and set the right length because if the column is char(200) and it holds a null value then length allocated is 200 bytes.
    The restriction cannot be broken.
    Regards,
    S.Divakar

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • Fedora 13: After upgrading from FF3.6 to FF6.0.2 I no longer have a Java plugin. How do I configure the Java Plugin for FF 6 ? There is no Java Plugin at the site

    I am Fedora 13x64 bit. I just installed FF v6.0.2 from the FF download site. I backed up the existing FF 3.6 as firefox_old
    I need to have a Java plugin to access company site, how do I configure the Java Plugin ?
    At the Plugin area in FF6 there is no Java Plugin available, even after a search.
    I have Java 1.6.0 installed in the OS at:
    /usr/lib/jvm/java-1.6.0/jre/lib/amd64/libnpjp2.so
    I googled how to configure Java Plugin for FF 6 for Fedora 13 and the trick was to create a soft link from /home/<userID>/.mozilla/plugins to the above libnpjp2.so

    AVtech wrote:
    . . . If a person can't get an answer here I don't know where else to turn since Sun certainly wouldn't offer tech support for a free product . . .These forums are user forums, and only occasionally visited by Sun employees. Sun does provide Java technical support options, although (of course) at a charge.
    See:
    http://developers.sun.com/services/
    . . . I guess we'll just use JRE 5 until it's unsupported, whenever that will be. I'm still waiting for an answer on that question, too. See:
    http://java.sun.com/products/archive/eol.policy.html
    http://www.sun.com/service/eosl/
    This document (part IV and Appendix) has some debugging and troubleshooting information that may allow someone involved in the problem to resolve the cause:
    See:
    http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/contents.htm
    Any steps that you can take to isolate the problem to specific Java versions, browsers, applets, web sites, operating systems (and versions), etc, would enhance the possibility of getting help.
    You can try the applets at this Sun location and see if any of them are "slow".
    See:
    http://java.sun.com/javase/6/docs/technotes/samples/demos.html

  • I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff.  How can I clear the memory space used by my deleted videos and photos?

    I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff.  How can I clear the memory space used by my deleted videos and photos?  I don't know why the photos are still taking up space and if I will have to reset my phone to get rid of the problem.

    Hey there TowneJ,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that’ll likely resolve the issue that you’ve described, where deleted files appear to be taking up space on your iPhone 5.
    If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
    So long,
    -Jason

  • How do you configure the server in this situation?????????????

    Hi,
    We have Oracle 10.2 and Windows 2003.
    We have Oracle on Cluster (with Windows software).
    When the System are without cluster all it’s OK!!!!!!
    We have 2 Resources Cluster Group: Oracle and Applications.
    We have Oracle in Oracle cluster group.
    We have “W” Drive and a ftp program in Application cluster group.
    We have C drive in both nodes. We have installed Oracle in both nodes but we have “W” drive only associate to the Active Node because is a Cluster resource (Application cluster group).
    All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
    We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
    We think to put UNC pathes instead of “W” but it’s not possible (Metalink: Note:290703.1)
    How do you configure the server in this situation?????????????
    Thanks!

    We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
    If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
    Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

  • I am unable to use my own network with my iphone for wi-fi.The message says "unable to join the network (my network). How do I configure the info in the phone to allow me access?

    How do I configure the setting in my iphone to allow me use of my own network?

    Thanks for the responses, they have been very illuminating!
    This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
    I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
    I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile.

  • How do I configure the number of connection in the pool for webservice axis

    Hi
    How do I configure the number of connection in the pool using xml.
    We are using axis 1.4 and commons-httpclient-3.0.1Is there any way we can do it using the client-config.wsdd file.
    We do not want to do any modification in the code for this.
    Is it possible to set socket timeout also in the wsdd file.
    Your resolution will be really helpful for us.
    Thank You
    Ottran

    Export them at a smaller size:
    File -> Export - not the options at 'Size'
    Regards
    TD

  • How do you configure the DAM so it can be shared across multiple CQ instances?

    How do you configure the DAM so it can be shared across multiple CQ instances?

    You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
    clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
    But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
    Yogesh

  • How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    See Terence Devlin's thorough explanation here.

  • How do you configure the ipad to print air print but of A4 size please ??????

    how do you configure the ipad to print air print but of A4 size please ??????

    Frankie,
    The usual setting is in Printing Preferences.
    In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
    I can provide details and "how-to" if you need more help.
    Printer model info would be helpful, and do you have your printer software loaded yet?
    I hope this helps!                                 
    We work hard to help!
    When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
     2012 Year of the Dragon!
    Dragon Tips!
    Install your Printer Software!
    Look for your Printer’s Software at your printer’s own website!
    Software, manuals, alerts, “how-to” information, and much more!
    To see if there is software for your printer, Start at:  Support and Drivers
    Kind Regards,
    Dragon-Fur

  • How Best to Manage the Media Cache?

    Hi. I use a Mac Pro and have a 24TB RAID which holds most of my media. My problem is how best to manage the Media Cache which gets very big, certainly to hold on my OS drive (as recommended) . I could store it in a separate "cache" folder on my RAID but will this effect performance? Or is it best to save it with its media? I would rather not trash the Cache files as I often need to draw upon older projects and it's media for current projects. I think this is the weakest part for FCP editors switching to Premiere.

    Ideally you should have five internal 'drives':
    OS/Programs
    Projects
    Cache/Scratch
    Media
    Exports
    You've got the OS and Media drives worked out, now get those other three in place.

Maybe you are looking for