How can build help file for right to left and non english language
hi erverybody, i have a big problem ,please help me
i creat a c# appliction with vs.net2005 and i want to write
help file for it .i need a software to creat help file for non
english language(such as persian or arabic) and right to left
support . i tried many helpware chm builder tools but each of them
made a problem .i dont know what to do .what is the best solution
for creating help files for right to left and non english languages
how can i build my help file with f1 helping ability .thank u
so much
Text
Hi Mr_Sia and welcome to the RH community.
You could try looking at the HAT Matrix. This is a comparison
of all the help tools around. Click
here to go to it.
RoboHelp itself, whilst it does support over 35 different languages
does not support Persian or Arabic.
Similar Messages
-
How to build ear files for ADF application using Ant task
How to build ear files for ADF applications using Ant. The ojdeploy ant task can not find application-level deployment profiles. I am trying to automated build and release for ADF application.
Any help is highly appreciated.
Thanks
ShivaHi Timo
Thanks for your reply.
I have successfully created ear file using ojdeploy on jenkins. however when am trying to auto deploy using WLDeploy ant task am getting the following
error :
weblogic.application.ModuleException: :oracle.mds.config.MDSConfigurationException:MDS-01335: namespace "/oracle/webcenter/quicklinks/scopedMD" mapped to metadata-store-usage "WebCenterFileMetadataStore" but its definition was not found in MDS configuration
Please advise how to handle this.
As am a newbie to ADF, could you please advise if it is possible for the ADF application deployments can be automated for different environments using jenkins due to this MDS dependencies.
Appreciate your help.
Thanks
Shiva -
I have a G4 Quicksilver 2001 that no longer works, but the hd may still be good. How can I get files off the G4 hd and onto my new late 2013 iMac?
Also, how do I boot the G4 into FireWire Target Disk mode?
First, the G4 must be able to start to use FWTDM. If it can start, hold the t key at boot until you get a "screensaver pattern" that looks like this:
If the G4 is attached via a FireWire cable to a newer Mac with a FireWire port, the G4's hard drive will appear on the other Mac's desktop just as if it were any external drive. A USB cable won't work for FWTDM.
Just wondering if the drive in my G4, which I believe may be an ATA drive will also work in an enclosure for a SATA drive?
No. ATA (actually "PATA" or "IDE") and SATA are different interfaces. PATA external enclosures are now very hard to find. You best and least expensive option is the adaptor that BDAqua linked. One of its connectors is for PATA drives. -
How can I put validation for JTextField when gotfocus and lostfocus
Hi,
How can I put validation for JTextField when gotfocus and lostfocus ?
Thanks
WilsonYou add a focusListener to the control you wish to monitor. In the focusLost() handler you do whatever, in the focusGained() handler you do whatever.
-
How can we delete file for permenantly
how can we delete a file permanantly like (Shift + Del) in windows
If Finder is active, you can send any selected file to Trash with the hotkey
Command-Del
You can empty the Trash with
Command-Shift-Del
(you may need to press 'return' if you get a warning dialogue to complete the action). -
How can I convert files in Aperture to jpegs and keep the file large
I want to upload files into istock photo and they must be as big as possible but in jpg format. I end up exporting tiny little things going from 8mb to 300kb. How can I do it? I even tried going into CS3 but that only allowed me to convert to tif. I would appreciate any help - especially if it is simple!
Go to File >> Export >> Export Version(s)
In the resulting dialog box you'll find a drop down called Export Preset with a list of presets. One of them is JPEG Original Size. That should do it for you.
Also you can choose Edit at the bottom of the preset list and modify an existing preset or create a new custom preset.
BTW: the reason you couldn't do it in Photoshop is that you need to convert it from 16bit to 8bit before you can save a JPEG. That command in Photoshop is under Image>>Mode.
DLS -
How can I add file attachment to my form and get the attachment by email?
I'm using this code and it works fine, but I don't get the attachment file in the email. How can I add this to my code?
HTML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<script src="http://code.jquery.com/jquery-latest.js" type="text/javascript"></script>
<script src="http://dev.jquery.com/view/trunk/plugins/validate/jquery.validate.js" type="text/javascript"></script>
<script type="text/javascript">// <![CDATA[
$(document).ready(function() {
$("#form1").validate({
rules: {
first: "required",// simple rule, converted to {required:true}
email: {// compound rule
required: true,
email: true
last: {
last: true
comment: {
required: true
messages: {
comment: "Please enter a comment."
// ]]></script>
<script type="text/javascript">// <![CDATA[
function validate ()
if (document.form1.first.value == "")
alert("Please enter your First Name");
document.form1.first.focus();
document.form1.first.style.border="1px solid red";
return false;
else if (document.form1.last.value == "")
alert("Please enter your Last Name");
document.form1.last.focus();
document.form1.last.style.border="1px solid red";
return false;
else if (document.form1.emailaddress.value == "")
alert("Please enter your Email Address");
document.form1.emailaddress.focus();
document.form1.emailaddress.style.border="1px solid red";
return false;
function has_focus() {
if(document.form1.first.value == "")
document.form1.first.focus();
document.form1.style.first.border="1px solid green";
function set_focus(x)
document.getElementById(x).style.border="1px solid #80CA75";
function clear_focus(x)
document.getElementById(x).style.border="1px solid #DBDFE6";
// ]]></script>
</head>
<body>
<p><span style="color: #666666; text-align: center; font-size: 13px;">Please complete this form if you have any technical issue.</span></p>
<form id="form1" action="http://www.southsun.com/php/tech_issue.php" enctype="multipart/form-data" method="post">
<table style="width: 850px; font-size: 15px; padding-left: 20px; text-align: center;" border="0">
<tbody>
<tr>
<td style="text-align: left; padding-bottom: 20px;" colspan="2">
<h2><span style="color: #666666;">Please complete this form if you have any technical issue.</span></h2>
</td>
</tr>
<tr style="padding-top: 40px;">
<td style="text-align: left;"><span style="color: #abaf6f;"><strong>First Name</strong>:*</span><input id="first1" name="first" type="text" /> <br /><br /> <span style="color: #abaf6f;"><strong>Last Name</strong>:*</span><input id="last1" name="last" type="text" /><br /><br /> <span style="color: #abaf6f; padding-right: 33px;"><strong>Email</strong>:</span><span style="color: #abaf6f;">*</span><input id="email1" name="email" type="text" /><br /><br /> <span style="color: #abaf6f;"><strong>Shipping Method:</strong><br /></span> <input name="shippingmethod" type="radio" value="prioritymail" /> Priority Mail <input name="shippingmethod" type="radio" value="store" /> In Store Pick up <br /> <input name="shippingmethod" type="radio" value="ground" /> Ground <input name="shippingmethod" type="radio" value="3day" /> 3 Day Select<br /><br /> <span style="color: #abaf6f;"><strong>Payment Method:</strong><br /></span> <input name="paymentmethod" type="radio" value="paypal" /> Paypal Method <input name="paymentmethod" type="radio" value="creditcard" /> Credit Card<br /> <strong><br /> <span style="color: #abaf6f;">If getting an error message, please explain the error:</span></strong><span style="color: #abaf6f;"> <br /></span> <textarea id="errormessage" cols="20" rows="2" name="errormessage"></textarea><br /><br /></td>
<td style="border-left: 1px solid grey; padding-left: 40px; text-align: left;"><span style="color: #abaf6f;"><strong>If using Paypal, Were you redirected successfully?</strong><br /></span> <input name="paypalredirect" type="radio" value="yes" /> Yes <input name="paypalredirect" type="radio" value="no" /> No<br /><br /> <span style="color: #abaf6f;"><strong>If using Credit Card, Did you get an error?</strong><br /></span> <input name="carderror" type="radio" value="yes" /> Yes <input name="carderror" type="radio" value="no" /> No<br /><br /> <span style="color: #abaf6f;"><strong>What happened after clicking place order? </strong><br /></span> <textarea id="placeorder1" cols="20" rows="2" name="placeorder"></textarea><br /><br /> <span style="color: #abaf6f;"><strong>Comments</strong>: <br /></span> <textarea id="comments1" cols="20" rows="2" name="strcomments"></textarea><br /><br /> <span style="color: #abaf6f;"><strong>Attach PrintScreen</strong>: <br /></span> <input name="strresume" type="file" />
<div style="height: 50px;"> </div>
</td>
</tr>
<tr>
<td style="padding-top: 20px;" colspan="2">( * ) indicates required fields</td>
</tr>
<tr>
<td style="text-align: center; padding-top: 20px;" colspan="2"><input class="button" name="submit" type="submit" value="Submit" /> <input class="button" name="reset" type="reset" value="Reset" /></td>
</tr>
</tbody>
</table>
</form>
</body></html>
PHP
<?php
echo $savestring;
//--------------------------paramaters--------------------------
// Subject of email sent to you.
$subject = 'prueba con uploads';
// Your email address. This is where the form information will be sent.
$emailadd = '[email protected]';
// Where to redirect after form is processed.
$url = 'http://www.pch-graphicdesign.com';
// Makes all fields required. If set to '1' no field can not be empty. If set to '0' any or all fields can be empty.
$req = '0';
$target_path = "http://www.pch-graphicdesign.com/php/uploads/";
$target_path = $target_path . basename( $_FILES['uploadedfile']['name']);
$text = "Results from form:\n\n";
$space = ' ';
$line = '
foreach ($_POST as $key => $value)
if ($req == '1')
if ($value == '')
{echo "$key is empty";die;}
$j = strlen($key);
if ($j >= 20)
{echo "Name of form element $key cannot be longer than 20 characters";die;}
$j = 20 - $j;
for ($i = 1; $i <= $j; $i++)
{$space .= ' ';}
$value = str_replace('\n', "$line", $value);
$conc = "{$key}:$space{$value}$line";
$text .= $conc;
$space = ' ';
mail($emailadd, $subject, $text, 'From: '.$emailadd.'');
echo '<META HTTP-EQUIV=Refresh CONTENT="0; URL='.$url.'">';
?>Sending a file as an attachment to an email involves setting the correct MIME type and headers. There's a brief tutorial here: http://webcheatsheet.com/php/send_email_text_html_attachment.php.
Also, you need to use the same name as in your form. In the script you have shown here, the name of the file field is strresume, but your processing script uses this: $_FILES['uploadedfile']['name']. It should be this: $_FILES['strresume']['name'] -
Hi everyone. I am new to the forums, so let me be as mprecise as possible. i know the basic functionalities of Labview with MPC block etc. However, i dont know how to go ahead with implementing MPC control for a system whose state space model i possess. can anyone help me out?? the problem is that i dont even know the approach or the starting point..
This happens if you remove a program manually, but still have the registry keys to load files from this program.<br />
You can use the MSConfig program or the Autoruns utility to see which software and services are getting started.
*http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
You can use registry editor and do a search (Ctrl+D) for imesh to see if you can locate the registry key(s) that launches this program on a reboot.
Try to ask advice at a Windows oriented forum if you can't fix this.
* http://www.bleepingcomputer.com/forums/ - BleepingComputer.com - Computer Help Forums
* http://windowssecrets.com/forums/ Windows Secrets Lounge -
Hello. I have two devices and two accounts, so what i want is this:
I only want to store mail from both accounts in a remote place and copy most important mails to local folders.
(I will be grateful for any ideas as to where/how this "cloud" can be - specially free places)
* Can I have a copy of these local folders in both devices and the remote storage?
* Could i synchronize devices so that: when i move a mail to a local folder in any device, its copied to the same folders in
the other device and the remote storage place?
* The remote storage place will have many other folders. When I open Thunderbird, I also want to see these and the mail
inside, and also be able to move mail from the inbox to these folders.
* One of the accounts is gmail. In Account Setting tool, there is an option for synchronization. If there is no easier way, I can have mail for other account copied to gmail, and just syncronize gmail mail. For this, how will I copy my present folder structure to gmail. And how can I syncronize the local folders on the two devices?
Thanks in advance.The first awkwardness I see is that there's no obvious format in which to store messages remotely such that you can work with them in an email client. It may be possible to set the "Local Directory" option in the account in Thunderbird to point at some remote folder (DropBox comes to mind) but I have never tried this and I'd be nervous about what happens if connection can't be made, or if you happened to access it from two different places simultaneously. The other concern is that mail stores get big, quickly, and you'd be forever uploading and downloading large (multi gigabyte) files. Thunderbird stores what looks like a folder containing many separate messages as one big file, so there's no simple opportunity for incremental changes to be up/down loaded.
The whole idea of Local Folders in Thunderbird is to detach messages from servers, so they don't track what happens on servers. I say this to point out the distinction between files stored locally and permanently ("Local Folders"), versus cached copies of online files ("synchronized"). It's not safe to regard your synchronized folders as permanent.
So, synchronized folders on an IMAP server are "mirrored" in Thunderbird so you do have a local (albeit temporary and transient) copy of messages; this is done mainly to avoid repeatedly downloading messages if you re-read them, and it makes searching faster an more efficient. But these "synchronized" message track what's being done on the server, and so if they are deleted anywhere, all synchronized devices will at some point also see the deleted messages vanishing. (Unless you made a local copy in the Local Folders account.)
I use a gmail account pretty much as you have described; I copy or move messages to that account so they are visible in my phone, my tablet, my own laptop and my works computer. It's free, and it's "in the cloud"; the only reservation I have is its privacy. There are other providers (e.g. 1&1/gmx) who don't seem to have the data collection fetish that google thrives on.
It's fairly simple to create filters in Thunderbird to automatically copy messages to your "cloud account"; even better is to set up forwarding rules on the other accounts' servers, so your messages are automatically sent on and waiting for you when you next login, already in the cloud account. -
How can i upload file using ajax post request and jsp
Hi
this is my code files
addPhoto.jsp
<html>
<head>
<title>Add Photo</title>
<script>
var optionNo = 0;
var i=1;
var val=0;
var file = 0;
var exten = new Array(".jpg",".jpeg",".gif");
function addValues()
for(var i=0;i<5;i++)
optionNo += 1;
oNewOption = new Option();
oNewOption.text = optionNo;
oNewOption.value = optionNo;
addSelect.add(oNewOption);
function addBoxes()
var str = "";
var j=0;
val = document.getElementById('addSelect').value;
for(j=1; j<= val; j++)
str = str + '<font size=3>file:' + j + '</font>';
str = str + '<input type="file" id=filepath'+ j +' name=file'+ j + ' onchange="uploadFile(hidden'+ j + '.value)"><div id="result'+ j +'"></div>
str = str + '<input type="hidden" name="hidden' + j + '" value=' + j +'>';
document.getElementById('addPhoto').innerHTML = str;
function uploadFile(value)
var str = "filepath" + value;
file = value;
var param = document.getElementById(str).value;
var parameter = "filepath=" + param;
alert(parameter.length);
if(checkValidity(param))
var url = "uploadFile.jsp";
if (window.XMLHttpRequest) {
req = new XMLHttpRequest();
} else if (window.ActiveXObject) {
req = new ActiveXObject("Microsoft.XMLHTTP");
req.open("POST", url, true);
req.setRequestHeader("Content-type", "multipart/form-data");
//req.setRequestHeader("Content-length", parameter.length);
req.setRequestHeader("Connection", "close");
req.onreadystatechange = callback;
req.send(null);
else
document.getElementById("result" + file).innerHTML = "upload .jpeg,.jpg,.gif Files Only";
function callback() {
if (req.readyState == 4) {
updatepage(req.responseText);
function updatepage(str){
document.getElementById("result" + file).innerHTML = str;
function checkValidity(str)
var i=0;
var j=0;
var str1 = str.substring(str.lastIndexOf("."),str.length);
alert(str1);
for(i=0;i<exten.length;i++)
if(str1.search(exten) != -1)
j++;
break;
if(j>0)
return true;
else
return false;
</script>
</head>
<body onload="addValues()">
<h5>Add Photo(s)</h5>
<select id="addSelect" name="addSelect" onchange="addBoxes()">
<option id="select" selected>Select</option>
</select>
<div id="addPhoto"></div>
</body>
</html>
uploadFile.jsp
<%@page import="java.io.*"%>
<%
/*try
String contentType = request.getContentType();
System.out.println(request.getMethod());
System.out.println("Content type is :: " +contentType);
if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0))
DataInputStream in = new DataInputStream(request.getInputStream());
DataInputStream in1 = in;
int formDataLength = request.getContentLength();
System.out.println(formDataLength);
byte dataBytes[] = new byte[formDataLength];
int byteRead = 0;
int totalBytesRead = 0;
while (totalBytesRead < formDataLength)
byteRead = in1.read(dataBytes, totalBytesRead, formDataLength);
totalBytesRead += byteRead;
out.println("<br>totalBytesRead : " + totalBytesRead + " : formDataLength = " + formDataLength);
} catch(Exception e) {
e.printStackTrace();
try
String filePath = request.getParameter("filepath");
System.out.println(filePath);
File f= new File(filePath);
String path = f.getName();
String contentType = request.getContentType();
System.out.println(contentType);
//InputStream in = new FileInputStream(filePath);
DataInputStream in = new DataInputStream(request.getInputStream());
int formDataLength = request.getContentLength();
System.out.println(formDataLength);
byte[] buf = new byte[1024];
OutputStream out1 = new FileOutputStream("c:/docs/" + path);
int len;
while ((len = in.read(buf)) > 0) {
out1.write(buf, 0, len);
in.close();
out1.close();
out.write("File Uploaded SucssesFully");
catch(Exception e)
e.printStackTrace();
out.write("error while Writing File");
%>
the above code in request.getContentType() i am getting 0. I am not passing the content length. for the same application with out using Ajax i am
getting the size of file... it is very very urgent for me.. pls help me out on this...
Any one having the code on this pls mail me the code...
my mail id ... [email protected]
Regards
Ashok KumarSure, you can upload a file, using a form input element of type file. You pick this up with a servlet, though you need a special request wrapper to sort out the multi-part request you get back that way (there's a suitable package on jakarta.apache.org/commons)
The servlet decrypts the file and can pass the results to a JSP for display.
Don't try to do the complicated stuff in a JSP, it all gets incredibly messy, and that's not what JSPs are for. -
How can I install 'fortune' for XFCE4's 'Tips and Tricks' on startup?
There is an option (tips or fortune) for the content of 'Tips and Tricks' on startup, but actually no any 'fortune' texts supporting it. How can I make up?:rolleyes:
Thank you VVVVV much! Not only I got the 'fortune', more important, the 'tips' can be displayed as well! (See another post http://bbs.archlinux.org/viewtopic.php?id=32960 , just wonder if it was too stupid to ask, otherwise why nobody has dropped a line on it so far)
-
How Can I write Script for Indesign set left indent
I really need two scripts for indesign set left indent:
1. If the left indent is: 8, 16, 24, 32, 40, 48, 56mm... set the first -8mm; if the left indent is 0, set the left indent 8mm, first -8mm.
2. Whatever the first indent is, set the first 8mm.
Can someone help me?Hi, Trevor
I use change by list as below:
grep {leftIndent:48mm} {leftIndent:56mm}
grep {leftIndent:40mm} {leftIndent:48mm}
grep {leftIndent:32mm} {leftIndent:40mm}
grep {leftIndent:24mm} {leftIndent:32mm}
grep {leftIndent:16mm} {leftIndent:24mm}
grep {leftIndent:8mm} {leftIndent:16mm}
grep {firstLineIndent:8mm, leftIndent:48mm} {firstLineIndent:8mm, leftIndent:56mm}
grep {firstLineIndent:8mm, leftIndent:32mm} {firstLineIndent:8mm, leftIndent:48mm}
grep {firstLineIndent:8mm, leftIndent:24mm} {firstLineIndent:8mm, leftIndent:32mm}
grep {firstLineIndent:8mm, leftIndent:16mm} {firstLineIndent:8mm, leftIndent:24mm}
grep {firstLineIndent:8mm, leftIndent:8mm} {firstLineIndent:8mm, leftIndent:16mm}
grep {firstLineIndent:-8mm, leftIndent:48mm} {firstLineIndent:-8mm, leftIndent:56mm}
grep {firstLineIndent:-8mm, leftIndent:32mm} {firstLineIndent:-8mm, leftIndent:48mm}
grep {firstLineIndent:-8mm, leftIndent:24mm} {firstLineIndent:-8mm, leftIndent:32mm}
grep {firstLineIndent:-8mm, leftIndent:16mm} {firstLineIndent:-8mm, leftIndent:24mm}
grep {firstLineIndent:-8mm, leftIndent:8mm} {firstLineIndent:-8mm, leftIndent:16mm}
but not that perfect,
I want to useing jave "if{}" or "for{}" to write this script, but I don't kown the syntext. -
How can I have multiple fields on the left and one large field on the right?
I'm trying to conserve space on a form. I have five "pass/fail" fields on the left and would like a large free text field to the right. This will be an area to comment on the "pass/fail" section. When I add the multi-line text box, it moves all my "pass/fail" mulitple selection boxes.
Any advice?Sorry FormsCentral doesn't allow a fields to spam over multiple rows.
Gen -
How can I use variable for a package filename and target file inODIFileMove
I want to use a variable for paths so that when I migrate from Dev to QA to Prod I don't have to do a lot of editing.
Specifically, I want a variable to be the first part of the path for the filename (\\sundev1\fnd1-hypd1) and join this with the rest (\update\log\*.log or specific filename) using several different objects like the ODIFileMove, ODI OS Command, OS Command, etc.
Thank you!Hi,
you could set up a database table holding processing parameters (i.e. Column1 - ParamName, Column2 - ParamValue).
One row could then be ParamName = FilePath, ParamValue = \\<server>\folder\
So, the refreshing query (attached to a logical schema) would be something like SELECT ParamValue FROM <your table> WHERE ParamName ='FilePath'
Then, create a variable which can refresh from the database and in the package, drop the variable onto the flow and set it's type to 'Refresh Variable' in the properties.
Hope this helps.
geeo -
How can load properties file for one time and use in entire application
Hi folks,
I dont want to read properties file every time , and want to get property value in any servelet or jsp page.(means i want to read only property file only for once and want to get value in any where ) , how to do this.
Message was edited by:
RajeshwarReddyTmeans we have to read file every time Know but i dont
want to be happen that ??? No you don't . You read the file once. You store it in the hashmap. Then you hand that hashmap to whatever class needing the data.
getProperties() returns the hashmap, doesn't read the file.
Maybe I should have called the method getMap or something.
Message was edited by:
karma-9
Maybe you are looking for
-
I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the
-
I HAVE SEVERAL IPHOTO LIBRARIES
Hi, I am not sure how i accomplished this but I have several iphoto libraries on my computer. On my desktop i have iphoto library and iphoto library 1 then in my pictures folder i have iphoto library 10.10.06. I believe the last is a rebuilt library
-
How can I sync my ipod to a new mac computer
How can I sync my ipod classic to my newer I mac computer? Ipod is about 6 years old Imac is less than 1 year old
-
Cannot view any sites on a particular server
I just got my MacBook Pro and imported all my prefs from my PowerBook G4 and everything's cruising along fine - EXCEPT! I cannot view any of the websites I host from any browser (Safari, FireFox, IE). I can view the rest of the net just fine. If this
-
Keep getting error when trying to use =related function in PowerPivot
Greetings, I have created a relationship between two tables based on a common field in PowerPivot, and whenever I use the =related() function to try and bring data from a field in one table to a field in another table, I keep getting and error messag