How can check rollup level and autoconfigure or not on 11i

Hello;
I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks first

portcommand wrote:
Hello;
I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks firstUsing AutoConfig to Manage System Configurations with Oracle Applications 11i [ID 165195.1]
Autoconfig FAQ [ID 218089.1] -- 7. Is AutoConfig compatible with Oracle Applications 11.5.x?
How to check, which EBS Techstack Patchsets have been applied on 11i or Release 12.1.x ? [ID 390864.1]
How to Get The Patchset Level of Oracle Applications Products in R12 [ID 550654.1]
Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
Thanks,
Hussein

Similar Messages

How to check ink levels of a 4620 using windows 8.1

How to check ink levels of a 4620 using windows 8.1

Hi krmoss,
Welcome to the HP Support forums. I see that you would like to learn how to check the ink levels on your Officejet 4620 printer.
The steps on how to check the estimated ink levels can be found in your User Guide on page 74 in the section titled “To check the estimated ink levels from the printer control panel”. If you have installed the full feature software and driver for your printer onto your computer you can open up the HP Solution Center and check the from there as well.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to check patch level in SAP 6.0 ?

how to check patch level in SAP 6.0 ?
is there any T code available for this
thnx in advance

Hello,
In note [1076022|http://service.sap.com/sap/support/notes/1076022] we can see:
b) Minimum support package levels and SAP kernel patch levels
   For non-SAP BW systems the minimum 700 SAP_BASIS support package level is SP14.
   For SAP BW systems, the minimum 700 SAP_BASIS support package level is SP16 and the minimum 700 SAP_BW support package level is SP18.
   Please consult note 1152240 for the minimum DbSl kernel patch level and the minimum JDBC driver requirements.
Regards,
Eduardo

Family of 5, all use the same Apple ID/Password/Account. In settings/messages/send recieve you can "check" my email and up to three phone numbers. Essentially allowing all iMessages to be sent

Family of 5, all use the same Apple ID/Password/Account. In settings/messages/send>recieve you can "check" my email and up to three phone numbers. Essentially allowing all iMessages to be copied to shared account numbers. Please help me figure out how to prevent my children from recieving my text correspondence.

On the devices for the members of your family that you DO NOT want to see your iMessagees, go to
Settings App
Messages
Send and Receive
You should see a list of available contacts which would make messages appear. Make certain that each family member has their own individual contact and NOT the same one that you use. I find it useful to have each family member have their own icloud email and use that for iMessaging my kids. My kids do not have iPhones, but if yours do, their phone number should be listed as well. For iPads and iTouches, use icloud email addresses. If you need to send a message to all 3 kids, say, you can just add all three emails to the To box on your iMessage.
Hope that makes sense.

HOW can I FIX Mavericks and Safari 7.0 to allow Gmail to work? Gmail has been FUBAR'd since downloading Mavericks today. Finally found the brute-force logout site to just getr logged out; can't keep doing that. Other features no longer work, either.

Made big mistake of downloading Mavericks today.
Been struggling with all the FUBARd messes it caused, ALL DAY.
Google basic buttons don't work--can't log out or other basic functions.
Website use is impaired.
It took almost 3 hours to do a basic online order on one of them--at this rate, I'll be out of business soon, and it's seriously impairing Christmas preparations!
Google Voice/Video are screwed up, had to RE-download their voice/video plugin all over again--again.
Voice/video quality is REALLY poor.
Lag times in so many things are bad.
Thought this would download WITH the better writing/bookkeeping programs--NOT!
Mac Maps is piddle compaired with GoogleMaps.
The Email program on the desktop is REALLY hard to use, has few useful functions. It's MAYbe good if one only has ONE email; using it with severeal various email accounts is a serious liability in many ways--like filing, sorting, marking, etc.; no clear way to move email files to an external drive to save, to unload the HD.
HOW can Safari and Mavericks be fixed?
IF not, HOW can I REMOVE Mavericks and get back to Mountain Lion--which was not too great, but certainly more functional than Mavericks!
I NEED my web-based emails to work--NOW...NOT when Mac finally gets around to fixing things sometime later.
I NEED online ordering to work--NOW--not later when Mac finally gets around to fixing things.
PLEASE someone--any help out there? I couldn't even find but a rare hint that Safari 7.0 even exists--much less that anyone admits it's got problems, nor fixes for it.
What to do? Throw the whole unit out? Wipe and reboot? Dumb it back to OS 10? HOW? WHAT?
[freaking out here...]

Zak Adelman, LexSchellings,
It's a shiney new computer. Came loaded with Mountain Lion.
Too busy learning to use the blessed thing, to download anything....except...
The only pluggin that had to be loaded, was Google Voice-Video pluggin, while Lion was still it's OS. [AND been using the Safari that came already in it.]   Had to do that a couple times--nothing new there--that plug-in had to be re-loaded when using a PC, too--THAT happened even before Google slammed everyone into coerced use of it's Google+.
    [I understood from others, that Firefox won't work in Mac units--or I woulda put that in it to see if that solved anything]
This unit seemed a bit sluggish from the git-go, out-of-the-box.
I figured that was probly the local DSL here---rural DSL is...um...our DSL's not something to brag about, but it's the best we can do...
The difference between speed of loading pages, etc. on the new Mac, was --not-- toooo terribly different--though yes, slower on Mac....and chalked it up to my inexperience with Mac.
Been trying to get things up and running for a bit over a month now.
NOT doing very well at it--just barely getting by; rapidly falling behind what needs done [work].
Google worked just --OK-- when OS was Lion, as did the Google voice/video--slower, and voice-video was kinda scratchy or glitchy, but worked enough to --get by--.
Loading Mavericks, ruined that.
VOIP calls via Google talk have bad echio, static, cut-outs; video calling was pixilated or not working; WAS cued to re-load it's Voice-Video plug-in....which seemed to help a bit, though not very well; it only helped the Voice-Video some, not all--figured that was probably Google issues, less than Mac's, since Google has been increasingly dysfunctional as they have twisted it to be a social media-dominant thing.
[[now seeking an email venue that does what Gmail was good at, including the Voice-video calling, that has no intention of turning itself inside out to be "social"]]
Can't sign out of Gmail or Google+, nor use buttons in upper right corner with the drop-down menu.
NO buttons in upper right corner cluster on Gmail work, except the name+ button to toggle over to Google+---which I don't need! [yeah--THAT's a Google problem!]
Can only switch to HTML version by catching that button as the account signs in--if one fails to be fast enough with their fingers, it goes to Google+; can't get to email unless type in mail.google.com.
Managed to catch that button today, and clicked to use HTML "permanently" until these issues get solved.
ALSO:
Have fairly new [about 1 year?] HP bluetooth printer-scanner.
BUT, after Mavericks loaded: it HAS the unit listed, HAS drivers for it, HP unit IS listed as default printer, everything --seems-- "go",
.....except Mac keeps posting it's out of ink, and/or, not hooked up, and/or not turned on--even when it is on.
It's SUPPOSED to be blue-toothing that printer/scanner.
It did it for Lion, before loading Mavericks, even though it was troublesome to get it to work, it at least HAD printed one document when Lion was the OS.
Thank you...Downloaded EtreCheck:
BTW: Trying to copy/paste data from that check list, to this post, was achaic:
had to use Edit, select all, then use edit again to get it pasted--the mouse buttons weren't allowed to copy-paste using right-click functions [is this a relic limited-function "thing" with Mac?, or is it because I wanted to keep using this new wirless, non-Mac mouse?].
Advice?
See below...
Hardware Information:          Mac mini (Late 2012)           Mac mini - model: Macmini6,1
              1 2.5 GHz Intel Core i5 CPU: 2 cores;           8 GB RAM
Additional:
   Monitor used = Visio flat screen. [not Mac]
   Keyboard = Logitech solar wireless [not Mac]
   Mouse = Logitech wireless
Video Information:           Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 19:33:25
Disk Information:
          APPLE HDD ST500LM012 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (456.94 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          MediaTek Inc MT1806
          Logitech Logitech USB Headset
          Logitech USB Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.google.keystone.daemon.plist
Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] com.hp.devicemonitor.plist
          [loaded] com.hp.messagecenter.launcher.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          SpeechSynthesisServer
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins::
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          o1dbrowserplugin: Version: 4.9.1.16010
      ====== npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 ===[this was in red]=====
          googletalkbrowserplugin: Version: 4.9.1.16010
Bad Fonts:
          None
Old applications:
          HP Device Monitor:          Version: 2.7.0 - SDK 10.5
                    /Library/Printers/hp/hpio/HP Device Monitor.app
Time Machine:
===      Time Machine not configured! ===[this was in red]===
Top Processes by CPU:
               6%          WindowServer
               4%          Safari
               4%          SafariDAVClient
               2%          EtreCheck
               0%          com.apple.iCloudHelper
Top Processes by Memory:
          303 MB          Mail
          270 MB          Safari    ======[this is version 7.0 ]======
          262 MB          mds_stores
          147 MB          softwareupdated
          147 MB          com.apple.IconServicesAgent
Virtual Memory Statistics:
          1.77 GB          Free RAM
          2.85 GB          Active RAM
          2.36 GB          Inactive RAM
          1017 MB          Wired RAM
          4.64 GB          Page-ins
          111 MB          Page-outs

Upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?

upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you backup your computer (http://support.apple.com/kb/HT1427)?
--- If you don't regularly backup your computer, now is the time to start.
4. Do you backup your iPhone (http://support.apple.com/kb/ht1766)?
Check the calendar list on the left hand side of iCal. Is it that the individual events are duplicated or is it just that you have the same calendar listed more than once? If its that you have more than 1 copy of each calendar, you can delete one of the duplicate calendars to eliminate the duplicates.
If you find that it is the individual events that are duplicated then there are 2 options:
1. Restore your computer iCal database or iPhone from a backup made before the duplication occurred.
2. Use a duplication removal program (or do it by hand) to remove the duplicates: http://www.nhoj.co.uk/icaldupedeleter/
If you have a backup made before the duplication occurred, reply back with what kind of backup you have and I'll suggest how to recover the calendars.
To avoid this issue in the future:
Keep regular backups. They are your best defense against data anomalies which are a fact of life in computers (although hopefully rare).
Keep your computer and iPhone software fully up to date (Apple > Software Update / Settings > General > Software Update).
Make sure the date and time on your computer and iPhone are correct before you sync the two devices.
Make sure the cable connections between the two is solid and that the cable shows no signs of physical damage.
Hope that information helps.

On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

It's either in local folders, as it seem you had been doing, or in icloud. If you go into the mac's Pages and view the icloud files, you can drag on onto another to create a folder. But you can only have folder one level deep, so you can't organize your files/folders like you can on a mac, using nested folder several levels deep.

CS3 - How can I preserve Links and Hyperlinks in my INDB?

I am still pretty new to ID, so please speak slowly :)
My problem - I create an INDB that consists of several indd chapters. The chapters include numerous Links (to PNG & PSD images) and Hyperlinks both to Text anchors to other chapters within the INDB, as well as to URLs. I have all items saved on my local HD. Once complete, I do "Package for Print", check the Preflight report to make sure all is OK (it is) and then save the new INDB folder in a new location on my local HD. This all seems to work just fine, BUT if I move this packaged INDB folder (such as to a backup drive, or give to another worker that copies it to their HD), upon opening the INDB file, some links and Hyperlinks are broken.
It seems that these broken Links and Hyperlinks are still pointing to the original locations on my HD. But obviously not all are, since most links/hyperlinks DO work fine. The Hyperlinks to Text anchors within other indd chapters seem to typically break. Is there a way to force these to reference the packaged assets within the INDB folder? Seems ID would be smart enough to look there itself!
Also, I was creating some Hyperlinks as "cross referenced" - that is, I created a URL Hyperlink Destination in Chapter 1 indd and then created Hyperlinks pointing to it from other chapter indd in the book. I have learned that these ALWAYS break in the above scenario, so I started creating the URL destination within the same chapter indd and pointing to it there rather than across chapters. But this is just more work to keep re-creating the same URL destination in every indd!
I'll keep running into these problems since I need to share my finished INDB with other CS3 users. I also would like to be able to do a Save As of the INDB when creating a revised, newer version, but I see this also results in the new INDB links/hyperlinks still pointing to the original INDB's assets! Any way to make the Save As update the Links/Hyperlinks in the new INDB?
Thanks greatly for any insight. I can find no help in the Help on these issues!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

All my PDF forms are automatically transformed in Word forms,how can I change that and only choose the PDF I want to transform

All my PDF forms are automatically transformed in word forms,how can I change that and only decide which PDF to be transformed in word

Hi Ulfsch,
Thank you for posting on the Adobe Forums, kindly try the step mentioned below.
1) Right click on any of the PDF file and choose the option open with
2) Select choose default program
3) Select Adobe Reader/Acrobat from the list
5) Check the box "always open this type of file with selected program" (not the exact same wording)
6) Click OK
If you are on Mac, CTRL+Click on the file.
Go to Get info
Go to Open with
Change it to Adobe Reader/Acrobat and click change all.
Thanks,
Vikrantt Singh

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How can I pass username and password in a client bean to call a webservice?

Hi,
I have created a Client Java Bean for a web service (an automatically created Service from a Bapi) that requires username and password. How can I pass username and password in the code?
Thank you!
Julia
This is my code:
public Z_FlightGetlist port;
Business Method.
public String test1234() {
try{
BAPI_FLIGHT_GETLIST list = new BAPI_FLIGHT_GETLIST();
list.setAIRLINE("KLM");
port.BAPI_FLIGHT_GETLIST(list);
return "ok";
catch(Throwable e){
return "error"+e;
public void ejbCreate() throws CreateException {
try{
InitialContext ic = new InitialContext();
Z_FlightGetlistService s = (Z_FlightGetlistService)ic.lookup ("java:comp/env/FlightProxy");
Z_FlightGetlist vi = (Z_FlightGetlist)s.getLogicalPort(Z_FlightGetlist.class);
this.port = vi;
catch(Throwable e)

Hello Julia,
Check this document
http://help.sap.com/saphelp_nw04/helpdata/en/50/a5d13f83a14d21e10000000a1550b0/frameset.htm
Best regards, Maksim Rashchynski.

How can i accentuate whites and blacks in photoshop b/w ,no acr?

Hi
how can i accentuate whites and blacks in photoshop in black and white photos?
i tried silver evef 2 and there is a feature to boost whites and blacks http://www.niksoftware.com/silverefexpro/usa/entry.php?view=usa/features.html#amplify_blac ks_and_whiteshttp://
levels and curves don't give me the same results
i tried to create a luminocity mask of whites with selective color
is there a great skill to boost whites for example?
thanks
cheers

mantralightroom wrote:
because silvers v2 is a nice plugin , i like how it can boost ,aplify the whites and the blacks
can't do the same results with levels or curve or selective color
I use CS5 with Silver Efex Pro v2, but again, without seeing an example of what you're seeing or what you want to achieve, it's difficult to suggest what specific technique will get you what you want using Photoshop alone.
I'm sure some combination of Luminosity Mask, Levels/Curves/Contrast Adjustment Layers would probably give you what you want, but if the Silver Efex Presets, perhaps with some tweaking/customization, give you what you want, and the speed, or lack thereof, is not a problem, well, just stick with what you have!
And as Duotone and Lundberg have pointed out, there are alternatives to Siver Efex; I'm sure you could download a 30 day trial of those packages to play with and see if they meet your needs.
Good luck
Paul

How can I get high and low value of a histogram?

Is it possible the get the luminance value of brightest pixel and darkest pixel in an image using aescript?

Hi,
this is the code i used.
The size of the sample is determined by input parameters 'numCols' and 'numRows', which is the simplest way to do it.
Specifiying instead the radius or size of the sample would require more code to make sure that the layer is scanned entirely...
Lots of comments, can be shortened a lot.
Xavier.
function getLuminanceData(layer, postEffect, time, numCols, numRows){
    // layer: layer object (inside a ae comp)
    // postEffect: if true, the layer's effect are taken into account, else ... not.
    // time : the time at which the histogram is determined
    // numCols, numRows: integers >=1    ( how many rows and columns to determine samples size)
    //        if not specified, numCols defaults to 10
    //        if not specified, numRows defaults to Math.round(numCols*layer.height/layer.width)
    //        if the samples size turns out to be too small (<1) those numbers are redefined so that the sample size is 1 (===> V-E-R-Y S-L-O-W)
    // returns an object:
    // numCols, numRows: the actual number of rows and columns used (the number of samples is numCols * numRows)
    // radius: the corresponding sampling radius
    // hist: Array(101). hist[L] : how many samples have luminance L (L: integer in 0-100)
    // minValue: the smallest L for which there is a sample with luminance L
    // minCoord: all samples coordinates with minimum luminance (arranged into an array - the coordinates are those of the center of the sample)
    // maxValue, maxCoord : same for max
    postEffect = !!postEffect;
    if (typeof time !== 'number' || isNaN(time)) time = layer.time;
    numCols = numCols>=1 ? Math.round(numCols) : 10;
    numRows = numRows>=1 ? Math.round(numRows) : Math.round(numCols*layer.height/layer.width) || 1;
    var
            bpc = app.project.bitsPerChannel,
            w, W = layer.width,
            h, H=layer.height,
            size_x = W/numCols,
            size_y = H/numRows,
            numSamples,
            radius,
            L, lumHist = new Array(101),
            minValue, maxValue, minCoord=[], maxCoord=[],
            color,
            exprStart, exprEnd,
            doUndoGroup;
    // check that numCols and numRows are not too big:
    if (size_x<1){size_x=1; numCols = W;};
    if (size_y<1){size_y=1; numRows = H;};
    numSamples = numCols*numRows;
    // ~ 1 second and more (for 1 image, 1 frame) is considered s-l-o-w
    //if (numSamples>=4000 && !confirm("This will be s-l-o-w. Continue ?")) return;
    // expression :
    radius = [0.5*size_x, 0.5*size_y];    // radius is half the size of the sample
    exprStart = "rgbToHsl(sampleImage(";
    exprEnd = ", "+ radius.toSource()+ ", "+postEffect.toString()+", "+time.toString()+"));";
    // initialise lumHist to an array of zeros:
    for (L=0; L<101; L++) lumHist[L] = 0; // luminance from 0 to 100
    // if the number of samples is small enough, putting the action sequence inside an undoGroup fasten things up a bit, and allows to preserve undos history
    // if the number of samples is huge, an undoGroup will actually slow things down (apparently)
    doUndoGroup = numSamples <= 1e5;
    if (doUndoGroup) app.beginUndoGroup("Get Luminance Histogram");
    // if necessary, go to 16 bpc
    if (bpc<16) app.project.bitsPerChannel = 16;
    // add a temporary color control
    color = layer.effect.addProperty("ADBE Color Control").color;    // the color property of the color control
    for (w=radius[0]; w<W; w+=size_x){
        for (h=radius[1]; h<H; h+=size_y){
            color.expression = exprStart + [w,h].toSource() + exprEnd;    // ie : rgbToHsl(sampleImage([w,h], radius, postEffect, time));
            // if (color.value[3]<0.1) continue;
            L = Math.round(100*color.value[2]);
            ++lumHist[L];
            if (minValue<0){
                // very first sample only
                minValue=maxValue=L;
                minCoord = [[w,h]];
                maxCoord = [[w,h]];
            else{
                if (L<=minValue){
                    if (L===minValue){if (minCoord.length<1000) minCoord.push([w,h]);}    // only keep first 1000 points with smallest luminance otherwise the minCoord array can grow too big (eg red solid, 1920*1080, radius = [0.5, 0.5], ===> 2,000,000 entries..)
                    else{minValue=L; minCoord = [[w,h]];};
                if (maxValue<=L){
                    if (maxValue===L){if (maxCoord.length<1000) maxCoord.push([w,h]);}    // same
                    else{maxValue=L; maxCoord=[[w,h]];};
    color.parentProperty.remove();
    if (bpc<16) app.project.bitsPerChannel = bpc;
    if (doUndoGroup) app.endUndoGroup();
    //if (maxValue === minValue){};
    return {numRows: numRows, numCols: numCols, radius: radius, hist: lumHist, minValue: minValue, maxValue: maxValue, minCoord: minCoord, maxCoord: maxCoord};
$.hiresTimer;
var luminanceData= getLuminanceData(app.project.activeItem.layer(1), false, void(0), 100);
"Ellapsed time : "+ $.hiresTimer/1e6;

How can check payment advice program

How can check payment advice program, pls tell me the steps

Hi,
You have to do the configuration for chaque payment advise...
1. IMG > Financial Accounting > Accounts Receivable and Accounts Payable > Business transactions > Outgoing Payments > Automatic Outgoing Payments > Payment Media > Make settings for Classic Payment medium programs > Assign payment forms for Payment Method in Company Code >>>>>>>> Here assign the payment advise (form) against your company code. AND
2. IMG > Financial Accounting > Accounts Receivable and Accounts Payable > Business transactions > Outgoing Payments > Automatic Outgoing Payments > Payment Media > Make settings for Classic Payment medium programs > Assign Payment medium program for Payment Method in Country >>>>>>>> here assign the payment program against your payment method... normally payment program is RFFOUS_C.
Now, run the authomatic payment program (F110) if it is configured earlier or run Manual Outgoing Payment F-58. It will create the payment advaise...
Hope it helps
Saravanan.A
Assign Points if it is useful.

How to check ink level of HP 3500 series deskjet printer's cartridge?

How to check ink level of my new HP deskjet 3510 e-All-in-one printer's ink cartridge?

Hi Kumar12463,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Deskjet 3510 and needing to check ink levels. HP Print and Scan Doctor.
In this document choose this option to check the printer's ink levels and to view the cartridge details such as install dates, warranty dates, and serial numbers under review additional hardware functions.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How can check rollup level and autoconfigure or not on 11i

Similar Messages

Maybe you are looking for