How can generated EWA for SAP Portal system

Hi Guru there,
Usually generate EWA should maintenan RFC, We have SAP Portal systems ( prod PP1 and test PT1 and dev PD1), but they are not appeared at saplogon and no general SAP interface, only operationing system level we can start/stop SAP system and database and from the operating system browser can see the portal work normal ( 50000 port) or not.
How can I generate EWA from solman?
waiting for your kind reply!
best regards,
WEI

Hi Wei,
Do you already know SAP Note <a href="http://www.service.sap.com/sap/support/notes/976054">976054</a>?
This SAP Note describes the setup of EWA for NON-ABAP Components.
Please see the description and the attachments.
Best regards,
Ruediger

Similar Messages

How 2 generate SMS for SAP server backup

Hello experts,
Please advice how can I proceed for generating an SMS on successful/unsuccessful completion of SAP server backup.
Thanks in advance,
Aastha.

Hi,
Check this :
Is there any Function Module available to send SMS (Short Message Service)?
And Use the search below;
[Search Results For send sms (~325 results)|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=send+sms&cat=sdn_all&start=1]
Regards
Karthik D

How to setup EWA for non-ABAP system with SM 4.0 ?

Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
Thanks.

Hi Andrew,
we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
This is the old, available standard solution. At the moment we develop it also for java stand alone.
I think it will be available with the new ST-SER in autumn
Regards,
uDo

How can I search for files in System and Library folders

This arrose when I tried to find Archive Utility.app. Neither a Finder search or Spotlight found it, apparently because it is in Hard Drive/System/Library/CoreServices and the System folder is not searched. I've had similar problems when trying to find things in Library. How can I search these folders?

You can enable the Finder to include System files in its search
In a Finder finder window select Kind then Other… locate System files in the list and click the checkbox.

EWA for java only systems - how to get ewa at the end

Hi gurus,
I have a solma system in which all smd agent setup for portal was done and also all tasks (to collect data for EWA) are running well for ep systems aswel.
We are at sps 17 in solman.
I need to generated EWA for this portal system.I have no idea of how to generate it at the end.and i need that report routed to my mail.Some one please let me know how to generate EWA(after setup of every thing) and how to route it to mail address.
Thank you.

Hi ,
Thanks for few inputs
I have my EP system in system components in java (sub). and also in systems->netweaver->I have cinfigured my EP.But after this also I am unable to schedule it in DSWP.Can any one of you give some thoughts.(Seems I am missing some thing here - can any one let me know the procedure here to cross verify)
Rohit,I followed that user guide with out missing a single point!.But still I am unable to pull my report..
Tried manually with xml file(generated for EP from SM) and given it in DSM but it is saying no data available.
Seems nothing is coming from my EP.
Below are few exceptions in xml file.
1) introscope data is missing
Cannot find agent name Business-Sandbox_SEP_server0 for
instance[IInstance: key=1178028371063144, type=[Server],
nodeId=13865850, creation=Tue May 01 09:05:01 CDT 2007]
for thie exception - not sure why my SM is not resolving EP's sid.
Please not - SMD is running fine in EP
Any thoughts?
2) PAR data is missing
ORA-12505, TNS:listener does not currently know of SID given in connec descriptor
The Connection descriptor used by the client was:
Thank you.

EWA for non-ABAP systems

Hi,
We are planing to implement EWA for Java systems. Currently EWA is active for all ABAP systems. Do we need Wily Introscope in order to setup the EWA for non-ABAP systems? Or just we can use the SMD to generate EWA reports for Java systems?
Any idea?
Thanks,
Kris

Thanks Paul
We are on SM 7.0 EhP1. But I see following info in note 976054. It says data sources for EWA are different on 7.0 EhP1, does it mean we don't need wily from 7.0 EhP1 onwards?
Data sources in Solution Manager Diagnostics up to SP17 used for EWA for non-ABAP components analysis are:
                      - Introscope (SAP Note 797147),
                      - Garbage Collection (SAP Note 1079125) and
                      - Portal Activity Reporting (SAP Notes 936612 to know how to activate PAR and 914791, 1075276 to configure SQL
                        Command Console).
Starting with Solution Manager 7.0 EHP1 (SP18) the data sources are:
                      - Solution Manager BI for performance data
                      - Configuration and Change DB(CCDB) for configuration data
Thanks,
Kris

Access denied (Object: com.sap.portal.system/security/no_safety)

We are implementing EP 6.0, currently with SP11. We have developed some iViews, which are using RFC functions to get information from backend system, in this case SRM.
Everything worked fine, till the day weve transported those developments into other systems (production and testing systems). We are getting the following error Access denied (Object: com.sap.portal.system/security/no_safety). This error only comes out if the iView is called from inside another one, if called isolated it works fine.
Does any one have any idea about how to solve this?

Hi AA, you can find in the log file in order to identify what is the object that you need to add in the security zone.
You can find information for the security zones on:
http://help.sap.com/saphelp_nw04/helpdata/en/25/85de55a94c4b5fa7a2d74e8ed201b0/content.htm
Regards.

Use only Internet Explorer for SAP portal

Hello,
We have a requirement to use only internet explorer for SAP portal.
When we try to use portal in any other browser, it should display a message saying "This browser is not supported for the application" (or any other message). But purpose is, the portal application should be usable in only one browser i.e Internet Explorer.
If any one have any idea on this, how this can be implemented, then please share the same. I tried to find if there are any standard SAP portal parameters, but haven't come across any.
Regards,
Denish

Hi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit

Urgent: How to set up an SAP-XI system

Hi
Can anyone foroward me a document which explains how to set up an SAP-XI system.
Also what are the key elements which will be needed as mandatory things to set up an SAP-XI system.
This is a bit Urgent.Can anyone please help?
Thanks
Debraj Roy

HI,
here are the links you are looking for
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
http://help.sap.com/saphelp_nw04/helpdata/en/d4/d12940cbf2195de10000000a1550b0/content.htm
cheers,
Naveen

How to create DataSource for BI Source System in RSA1?

I have a BI Source System defined, however I can't figure out a way to create a new DataSource for it. I can create DataSource objects for all my other Source Systems, but I can't figure out how to do this for this BI system.
I select my BI Source System, right-click, choose "Display DataSource tree". When I right-click from the DataSource tree, I expect to get "Create Application Component" and "Create DataSource" options, but instead I only see "Replicate Tree Metadata" and "Replicate DataSources" options.
How can I create DataSource objects for my BI system?

Hi,
I guess you want to create a custom developed source in BI itself. For that you need to create the data source in RSO2 and inside you need to give the specific aplication component under which you want this DS to be in. Generate a data souce and then go to BI My self Source system and then replicate that particular appl component o view your data source.
Hope this helps
Regards,
Srini

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Disaster Recovery setup for SAP Portal

Hello,
I am trying to setup a DR site for our portal system. We are using EMC Recover Point to do the SAN replication between Production and DR site. We are using MSCS cluster with one CI and DI in Production. For DR, we are planning to go with a distributed installation with one portal and database node.
Can I create the DR system using System copy assuming that the SID is going to be the same, and the host names/IP addresses are different. How can we make sure that the custom applications deployment in production is in sync with the DR site? I don't think replicating the database preserves everything as the Java system persists data in both the database and the file system, for example the Software Delivery Manager (SDM) is persisted in the file system.
So, how can I make sure that the file system is also gets replicated between production and DR site? Should I keep the DR system shutdown and bring it up for weekly sync up or it can run parallel with the production system?
Thanks.

Hi,
Regarding the system copy, last time I did one myself (its a while ago so I'm not sure if it is still a limitation) it was not possible to have the Target SID the same as the Destination SID.
If this is not a limitiation anymore then yes you can use the system copy procedure as it also takes the SDM with it.
Cheers,
Benjamin

How do i download com.sap.portal.runtime.logon.par.bak

I need to download com.sap.portal.runtime.logon.par.bak
From what i understand, If you have the System administration privilege then you can download the par file from "System Administration"==>"Support"==>"Support Desk"==>"Portal Runtime"==>"Browse deployment"==>"ROOT"==>"WEB-INF"==>"deployment"==>"pcd"
I was able to navigate this way. However, i cannot find this logon.par under this directory structure.
In help.sap.com, i was told to Navigate to <J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd .There you can find com.sap.portal.runtime.logon.par.bak.
How is this different from the earlier navigation? I don't know how to do this? How exactly do i navigate this way?

Sandeep
I am sure that in the follwoing path, u can find the
com.sap.portal.runtime.logon.par.bak
<b><J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd</b>
MAke a copy of the PAR and u can Pull it into the NetStudio !!!!
Thanks
Kay

CSM SLB for SAP portal 5.0

Dear All!
Is there somebody who have experineces with SLB for SAP portal? The main question is : Which sticknies to use: SSL or IP based? How to configure IP based, because I did not find good explanation of "netmask" parameter in sticky,sticky-group command. What happen to sticky connection, when real server fail. Is it rebalanced?
Thanx!
Gabriel

Hi Gabriel,
I do not have experiences with SAP-Portal Loadbalancing but from my experience with loadbalancing I would say that this decision should be done regarding the surrounding environment. If there are proxies around which are used to connected to the loadbalanced VIP I would suggest SSL-Session balancing/stickieness. If clients are directly connecting towards the VIP a client-IP-stickieness might be easiser to troubleshoot.
Regarding the netmask issue:
Unfortunately there is no real documentation (I did not find any so far). I can only tell you the result out of my experience:
A netmask 255.255.255.255 is kind of host stickiness and 255.255.255.0 a stickieness of a /24 network. In other words I think that all Clients with a network of 10.1.1.0/24 are sticked to the decission once taken for one of the hosts in this segment while the sticky timeout did not take place. Maybe one can confirm or correct this.
Regarding the thing with the failure of a real server:
With the corresponding failaction defined in the serverfarm you decide what to do in case of an error of a real server. The stickiness should be corrected correspondig to the results you define with the failaction command.
This is how I dealt with those sticky issue when doing firewall loadbalancing with client-IP-Stickiness.
Hope that helped.
Kind Regards,
Joerg

How can I do for a row of a query be data provider for a variable?

Hi friends, I have a problem !
How can I do for a row of a query be data provider for a variable?
I need that a value of variable be stored when the user select a row in a query. At the BPS we can do this configuring the variable selector in WIB, and in a WAB how I can do this ?
Best regards,
Gustavo Liberado

In this case when I press the key to call other forms I need to wait for the response in the secondary form and then process the result.That is exactly what a "modal JDialog" (or JOptionPane) are used for.
Try it. Create a short demo program. All you need is a JFrame with a single button to show the modal dialog. All you modal dialog needs is a single button to close the dialog. After you show the modal dialog add a System.out.println(...) statement in your code and you will see that it is not executed until the dialog is closed.
Then once you understand the basics you add the code to your real program.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

How can generated EWA for SAP Portal system

Similar Messages

Maybe you are looking for