How can i access the Time Machine backup on my QSAN NAS device?

Hi
I have a QSAN TS412 TurboNas. I have set it up to be used for Time Machine backup and it works fine.
I have anothe device with over a year worth of backups on it and i would like to transfer them to the QSAN device, however the TimeMachine location is not accessible in finder, only the TM app can access it.
I am not the farmiliar with MAC's but am sure there must be a way to get the files where i want them.
Any help is much appreciated.
Ben

Byocky wrote:
Hi
I have been trying to talk to QSAN, but it is very tedious. They are not the most helpful of companies.
I have 10.7.4, it is supported by QSAn, but they just say that it cannot be accessed by finder.
I though a "wiz kid" in the forum may know what to do.
Ben
Gotcha, well good luck...maybe someone has experience with them.

Similar Messages

  • How can I use the Time Machine Backups from my Old Computer?

    I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
    Thanks
    Richard

    Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
    http://www.macosxhints.com/article.php?story=20080128003716101
    It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
    It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

  • How can I access old Time Machine backups after restoring from Time Machine?

    Just restored my iMac and I can only see "Now" when I enter Time Machine. How can I see all the backups and dates I had before I restored?

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

  • How can I copy a time machine backup from one Time Capsule to another ?

    How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

    from this support article: 
    (click on image to enlarge)

  • How Can I Migrate My Time Machine Backups To A New External Hard Drive?

    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

    ivan wrote:
    How Can I Migrate My Time Machine Backups To A New External Hard Drive?
    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
    Hi iVain
    Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
    Hope this answers your question. See:
    http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

  • I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

  • HT201250 My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

    My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

    Inherit a Backup
    Inherit a Backup (2)

  • Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

    Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

    Yes.

  • Restore can't find the time machine backup

    I am trying to restore my system from a time machine backup and the Restore option doesn't recognize my time machine backup. Any ideas on how to force it to see it?
    Some background:
    I am running Mountain Lion on a 2008 iMac. About 1 week ago, my internal HD failed. I had the hard drive replaced and then hooked up my external HD time machine back-up to restore my system. I started the computer with the command-R option and selected restore from time machine backup. It recognized the hard drive itself, but when I get to the screen to select the backup, it tells me there are no backups on the selected volume. I have run the repair in Disk Utility and the drive checked out ok. I have since installed Mountain Lion again on the internal drive, but didn't bring any files.
    Also, while the main computer was down I connected the external drive to another computer and used the show hidden files steps to find some files on the time machine backup and copied them to the other computer.
    I don't know if this relates, but I want to share all of the info: Back when the HD originally failed, the computer froze. When my son restarted the computer, it then asked what language he wanted. Then it began a restore process and asked him to select a volume to restore the system to. This is the bad part- He selected a partitioned drive where I had stored some files that didn't fit on the hard drive. It erased that drive and began restoring the system. Of course he didn't tell me about any of this until about 2 hours later, so we lost the contents on that drive. This partitioned drive is the same drive where my time machine backup resides. One partition is the Time Machine backup and the other was external data.
    Any ideas? I know I can manually restore the files, but it would be nice to be able to automatically do it. Also, is there a way to read the excluded list? I found the file that this is on...
    Thanks,

    Inherit a Backup
    Inherit a Backup (2)

  • How can I resolve repeated Time Machine backup failures?

    Time Machine stopped backing up from my wife's iMac 2 GHz Intel to a designated Iomega FireWire drive on August 6th. I have since erased, reformatted, and reselected the external drive. The profile for the external drive is as follows:
    Manufacturer: Iomega
    Model: 0x1
    GUID: 0xD0B80E5B000BE6
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    HDD USB 2.0/1394A Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x12804
    Product Revision Level:
    Sub-units:
    HDD USB 2.0/1394A SBP-LUN:
    Capacity: 149.05 GB
    Removable Media: Yes
    BSD Name: disk2
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Not Supported
    Volumes:
    Iomega Time Backup HD:
    Capacity: 148.73 GB
    Available: 148.31 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk2s2
    Mount Point: /Volumes/Iomega Time Backup HD
    I have also performed Tech Tool Pro 4.6.2 Advanced Tests on all related hardware to repair any damaged volumes and files but the Time Machine backup stops after at 97.5 MB of approximately 60+ GB of data.
    I have been unable to detect a cause for the failure in the Console logs but I note that the following entry has been repeated every few seconds in the system log since about August 23rd:
    Aug 26 10:55:30 Dee-Coopers-iMac mds[37]: (Error) Import: importer:0x844400 Importer start failed for 501 (kr:268435459 (ipc/send) invalid destination port)
    Aug 26 10:56:00: --- last message repeated 7 times ---

    I had experienced the similar problem when I first upgraded to Leopard. The problem was caused by spotlight indexing my hard drive and at the same time Time Machine was trying to backup the spotlight index file. The solution was to temporary exclude most of the documents (I have a lot of pdf files) from spotlight and let it runs through the indexing process before starting Time Machine.
    I don't know if my experience help you or not but it might be something worth looking into.
    Good luck.

  • HT201250 How can I migrate a Time Machine backup from an external hard drive to a new TimeCapsuls?

    I just got a 2TB Time Capsule.  I want to migrate my time machine backups on an external hard drive to the new Time Capsule.  I have about 430Gb of files to back up; I don't want to wait 7-8 days for the backup, unless I have to.  I am using OS 10.7.5 (forget which cat that is).  I have mounted the TC drive as 10.0.1.1; I tried to drag and drop from old to "data" on TC, but I get the error "The volume is the wrong format for a backup."  Any ideas how I can move my old files to the new, and bypass creating a brand new backup file?
    Thanks.

    Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
    The instructions on that are here
    If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

  • How can I make my Time Machine backup copy-able again?

    Because one of my Time Machine hard drives failed catastrophically, I bought a replaceemnt disk and tried to copy the Backups from my second TM hard drive as a starting point for the new drive.
    The copy failed: "A075BE7D-541F-4AA8-80D6-E5E42DD9B198"cannot be converted. Please install newer version of iWork.
    The 2nd error message was The operation can't be completed because an unexpected error occurred (error code -8062).
    The 3rd error message was: The operation can't be completed because you don't have permisssion to access some of the items.
    These last two messages were repeated a few times.
    Finally, this error message appeared: The operation can't be completed because an unexpected error occurred (error code -8003).
    The copy then terminated.
    Some additional points are:
    There is only one user on this computer.
    My copy of iWork is 4.3, which is the latest on the App store (certainly for Pages).
    I am running OS X 10.8.4
    I gave up trying to retain the Time Machine history on my new TM drive and used it as a new empty TM backup. So, at this stage I have one old 1TB backup drive with reasonable history and one brand new 3 TB backup. A week later I purchased another 3TB drive. Knowing that I couldn't copy from the old 1TB drive, I tried from the newer 3TB drive. It failed the same way. So the problem is not one of an old corrupted backup; it's new and repeatable.
    Using terminal, I searched my TM backup for the file named above (using "sudo ls -aR | grep A075BE7D"). Here's my output:
    big-screen:2013-06-11-002736 shenandoah$ sudo ls -aR | grep A075BE7D
    Password:
    A075BE7D-541F-4AA8-80D6-E5E42DD9B198.pages-tef
    ./Macintosh HD/.DocumentRevisions-V100/PerUID/501/23/com.apple.documentVersions/A075BE7D-54 1F-4AA8-80D6-E5E42DD9B198.pages-tef:
    ./Macintosh HD/.DocumentRevisions-V100/PerUID/501/23/com.apple.documentVersions/A075BE7D-54 1F-4AA8-80D6-E5E42DD9B198.pages-tef/Previews:
    ./Macintosh HD/.DocumentRevisions-V100/PerUID/501/23/com.apple.documentVersions/A075BE7D-54 1F-4AA8-80D6-E5E42DD9B198.pages-tef/index.pages:
    ./Macintosh HD/.DocumentRevisions-V100/PerUID/501/23/com.apple.documentVersions/A075BE7D-54 1F-4AA8-80D6-E5E42DD9B198.pages-tef/index.pages/Contents:
    ./Macintosh HD/.DocumentRevisions-V100/PerUID/501/23/com.apple.documentVersions/A075BE7D-54 1F-4AA8-80D6-E5E42DD9B198.pages-tef/index.pages/QuickLook:
    big-screen:2013-06-11-002736 shenandoah$
    Some web searching leads me to understand that these files are created under some (or all?) circumstances for Pages documents stored in iCloud. The names of the files above tell me this is part of Mountain Lion's version management system.
    My question is: how can I safely get rid of the files above or in some other way make my TM backup copyable? I am also concerned that if I can't copy the backup, I may not be able to use it as a backup or as a way to migrate to a new machine.
    Any help will be greatly appreciated.
    Thanks!

    David Bean wrote:
    So copying from a one-week-old TM volume was failing
    Have you run Repair Disk on it?
    I now realize that the folder in which the problem file(s) are stored on the backup,.DocumentRevisions-V100, is the folder in which OS X stores its versioning data for all users. I am now trying to work out whether I can safely delete these files from the backup
    That does get damaged on occasion.  I haven't seen it in quite a while, so it's pretty rare.
    You can delete it from the backups, via the TM interface, but you must be able to show invisible items). 
    First, open the Terminal app (in your Applications/Utilities folder). Be very careful with this app.  It's a direct link into UNIX, the underpinnings of OSX, but without the protections of OSX.
    In Terminal, the prompt looks like this:  <Computer Name>:~ <your name>$
    (where <your name> is your short user name).  It's followed by a non-blinking block cursor.
    Copy, do not type, the following after the prompt:
    defaults write com.apple.finder AppleShowAllFiles 1
    and press Return.
    You should just see the prompt again.
    Then see Time Machine - Frequently Asked Question #12 to delete all the backups of it.
    and from the live system filestore so they don't get copied out to a backup again.
    Yes. You will, of course, lose all previous versions, but since the file is corrupted, you may have lost some, most, or all of them already.
    When done, run the same command to hide the invisible items, but replace the "1" with a zero.

  • How do I copy the Time Machine backup folder to another folder? (Mac 10.7.5)

    Short version:  I like to make an initial backup of my Mac OS before I start installing stuff...just in case I need to get back to square one down the road.  I travel as a freelancer for work, so every couple of months, I'm on a new rented system.  But I need to move that initial backup folder to a sub-folder so that I can continue to run TM without ever deleting anything from that initial backup.  When I go to move or copy it to another folder or drive, it tells me I don't have permission. How do I get permission to move it?
    I've tried changing the permissions on the folder itself... It won't let me select any other users, and admins are not on the "write" list.  No dice.
    Any ideas?
    I'm on a Mac Pro 8-core
    MacPro3,1
    OS 10.7.5
    Thanks!

    Yeah, sorry...but there doesn't seem to be a "Time Machine" forum anywhere, this was the closest I could find.  I could have posted in OS 10.7 forum...but I was worried the traffic would be much lighter there.  If I should move my question there, I will.
    Ok, so my Time Machine has backed up to my external drive which I have split into two separate partitions.  I do not have automatic backups on.  I just ran it once to get the "footprint" before I start to alter things to my needs.  I'd like to compress and put away the backup on that first partition as sort of a general "back to square one" backup.  I chose to use Time Machine because I can literally restore it back to all the original settings, etc.  This is just a fire plan, but I really want to lock it off.
    Then, I want to set my second partition on that same drive as my incremental Time Machine backup.  That way, once I run out of space and it begins deleting the old stuff (and I will run out of space...I export several hundred gigs of video files per day), I can always retain that initial backup.
    The problem is, when I go to move that backup....AFTER I've pointed Time Machine to the new partition...or any other drive for that matter... It tells me that either the folder doesn't have "ownership rights" or it simply "cannot do that."  (I'll snag you a screen grab next time I'm by it if you want.)
    So, how do I get it to move where I want it so that I can make a new one?

  • Hi! how can I set the time machine/capsule back-up intervals? Heron 2

    HI! EVERYBODY,
    HOW CAN I SYNC 2 TIME CAPSULES INSTALLED IN TWO DIFFERENT LOCATIONS, MAIN HOME AND SUMMER HOME?
    THANK YOU FOR YOUR HELP.
    MERCi
    HERON2

    To use different backup intervals use TimeMachineEditor 2.5.3. I do not think syncing two Time Capsule to one another is feasible or possible. For all things Time Machine visit Pondini's Time Machine FAQ

  • How can I delete a Time Machine backup which did not complete?

    I was running a Time Machine backup when the disc got unmounted. Therefore I know all of the data is not backed up.
    I would like to delete that entry and rerun "Back Up Now" to start over.
    I tried deleting the folder with the latest time stamp on the drive and ran "Back Up Now". There was a very small amount of data that it then backed up.
    Obviously there is a large gap in manually managing this process and I would like to know the best fix.
    Thanks in advance.

    Please triple-click anywhere in the line below on this page to select it:
    tmutil compare | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign (“$”) to appear below what you entered.
    A TextEdit window will open with the output of the command. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
    Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

Maybe you are looking for