How can I access USB drive on AirPort Extreme with iPad

Good day. I recently purchased an AirPort Extreme, and am very pleased. I thought I would take advantage of the ability to store files and videos of my children on my USB drive on the router. Installation was flawless, however, i cannot access the USB drive with my IPad. I have seen several postings about this, am i correct in reading that this is not possible without a 3rd party app? If that is the case, could someone point me in the right direction?

Have you tried this? (And is the Airport new enough that you can call Apple?)
*Manually mounting Mac OS Extended (HFS+) volumes*
*From the Finder's Go menu choose Connect to Server.*
*Enter the AirPort Extreme Base Station's LAN IP address (by default 10.0.1.1).*
*Enter the username and password required to access the AirPort Disk(s).*
*Select the desired AirPort Disk(s) from the available Volumes.*
*Manually mounting FAT16/FAT32 volumes*
*From the Finder's Go menu choose Connect to Server.*
*Enter the AirPort Extreme Base Station's LAN IP address preceded by smb:// (for example, smb://10.0.1.1 )*
*Enter the username and password required to access the AirPort Disk(s). Leave the Workgroup field empty unless you have assigned one in AirPort Utility.*
*Select the desired AirPort Disk from the available CIFS (Common Internet File System) volumes*

Similar Messages

  • How to connect a hard drive on Airport Extreme (second edition)

    how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

    The USB port your Mac is high powered. The port on the AirPort Extreme is not.
    So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
    Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
    You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
    Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

  • How can I open ports on my AirPort Extreme, from WINDOWS?

    I have an Airport Extreme as my router, and I have a Windows-based computer. I need to open ports on the router (ironically, it is for my Apple TV).
    However, even though I can use the Airport Utility for Windows (latest version 5.5.3), I cannot open ports from the application.
    Everywhere I look, I am supposed to have a firewall tab in the Advanced section, but I do not have it. The only tabs that I have in Advanced are:
    Logging and Statistics
    MobileMe
    IPv6
    How can I open ports on my Airport Extreme router from Windows?

    Is your AirPort Extreme the only router in your network configuration?

  • How can I access music that is now unavailable with iTunes 11?

    How can I access music that is now unavailable with iTunes 11?

    Many of the tunes have exclamation marks by them and iTunes says they "cannot be found". If I do a search throughout my computer I find the songs. But it is very inconvenient.

  • How can I access my documents on iCloud from my iPad?

    How can I access my documents on iCloud from my iPad?

    It's as easy as ABC if you use clouds like Dropbox, Box.net, Sugarsync or Google Doc
    http://i1224.photobucket.com/albums/ee374/Diavonex/2f246602.jpg

  • How can I access HDD on Airport Extreme with iPad

    How can I access HDD on Airport Extreme with iPad

    Without third-party software I don't think you can.  An iPad has no user-accessible interface to a file system.  Just what is it you're trying to do?

  • How can I see the disk in airport extreme

    Hello
    I have an airport extreme, I downloaded the Airport Utility, I connected the printer and everyting is fine, I can access the printer from other computers at home. Then I unplugged the printer and connected an USB disk (working of course), and everything is fine, Airport Utility detected it. However, I dont know how can I access the disk from the computers. I have all windows 7 computers at home, but now way to see the disk. What I am doing wrong
    thank your

    I don't use this setting, so can't offer much assistance, but do know that your computer is exposed to the Internet, so it will receive all inbound traffic.
    Normally, a typical use of Default Host would be to setup a game console to allow online gaming when NAT settings otherwise would not allow communications to occur.
    You might want to start a new post for your question...but to get informed responses....you will need to state what you are trying to do. what steps you have performed, etc.

  • How can i access remote front panel in RT with LabVIEW run time engine in client PC

    Hi to all,
    I have developed the RT application with cRIO 9075 integrated chassis. And i have access its remote front panel in client PC. Now i want to access the remote panel in the client PC without having LabVIEW runtime engine. If i connect the remote panel with that client, it shows only the vi border. i doesn't downloads the  front panel.
    How Can i access its remote front panel without LabVIEW runtime engine in the client PC?

    You cannot view a remote front panel without the LabVIEW runtime - the LabVIEW runtime is what makes the remote front panel possible.  What you will want to do instead is likely create a Web Service that you can access from a remote PC without requiring the LabVIEW runtime.  However, this will require you to develop a web-based HTML or similar UI to interact with the VIs running on your system - NI hasn't yet created a way to export a LabVIEW front panel as an HTML'ish page.  
    -Danny

  • Can't add hard drive to Airport Extreme

    I wanted to add an external hard drive to Airport Extreme and I can't get it to show up in my net work. If I go to the configuration program for Airport Extreme, I can see that the base station has identified that hard drive (a Lacie 750 mb drive). Any suggestions?
    Message was edited by: Karlhan

    I have the exact same problem with one twist I tried adding an 8gb memory stick instead of a spinning hard drive. Airport utility recognizes it but it does not show up on any of the computers.

  • How can I configure my first gen Airport extreme?

    does anyone know how I can configure my 1st Gen Airport Extreme with my latest Airport Utility? Or is there another way?

    A 1st Generation AirPort Extreme is model number A1143.  Please check on the bottom of your device to confirm that you have this model number.
    A1143 can be configured using the latest version of AirPort Utility in Mountain Lion OS X (10.8.4).
    If you don't see model A1143......you do not have a 1st Generation AirPort Extreme. What model number do you see?

  • External Hard Drive on Airport Extreme with a PC

    I am trying to setup my Seagate FreeAgent external hard drive through my AirPort Extreme with my PC laptop.  The AirPort Utility recognizes the disk, and I have enabled file sharing, but I cannot see the drive on either of my PC laptops that are connected to the network.  How do I make the drive visable? 

    With an AirPort Extreme, the PCs will "see" the HFS+ formatted drive on the network as a FAT32 volume, so there is no need to reformat the drive as FAT32, but the normal limitations of FAT32, like maximum file size of 4 GB, slow transfers, etc. will still apply.

  • How do I backup folders on my shared USB drive on Airport Extreme?

    Hello,
    I have a USB drive as a shared drive on my Airport Extreme.  I DO NOT want to use it as my backup drive.  I have a drive connected to my MacBook Air.  But I want to back up folders on that shared drive where my photos and music are stored.
    I don't see an option in Time Machine.
    How do I do this?
    Thanks

    Time Machine will only backup your Macs internal hard disk or any external hard disks physically attached to the Mac. Time Machine can not backup one remote device to another remote device.
    To backup the external HDD, you would need to first attach it to your Mac, for Time Machine to "see" it. Unfortunately, this would not be very convienent in the long run.

  • Can I attach USB drive to Airport Express USB port

    I would like to attach a USB drive to my Apple airport Express USB port so that I can back up my data on my MBP and have my music stored on it for playing back over Apple TV.
    Is there any issues to doing this? As an example, how would I see the drive?
    thanks in advance.
    Adam

    Well, you can certainly attach a USB drive to the port on the AirPort Express.....but nothing will happen if you do this....since the USB port on the Express will only support a compatible printer and Keyspan remote control.
    You will need an AirPort Extreme if you want to attach a shared hard drive to the USB port.

  • Can you connect a USB drive to Airport Extreme or an Airport base for TM

    Would like to backup MacBooks in 2 different scenarios with Time Machine. One is a USB external drive attached to Airport Extreme and the other is doing the same with an Airport base. Will both work? Also, I have been partitioning the direct USB attached hard drives so that I have a Time Machine partion and a copy of the internal hard drive. This allows my kids to boot from the external drive and still work in case the internal drive has failed or becomes corrupted. So far we have experienced 3 internal drive failures, one during finals and this has saved them. Can you boot from an external drive copy of the internal drive if it is connected to either an Airport Extreme or Airport base?

    I am confused as on another site I saw that the Time Machine backup to Airport Extreme was working than broken by an update in 2008, then fixed again by another update in Oct. 2008. So is it officially supported or not. I cannot say that I am impressed with Apple's documentation and updates to what is supported and what is not.
    Kappy, I do not see the concern with partitioning a drive and then taking backups to one partition and having a Restore created copy of the hard drive in another. The drive is partitioned and that should keep one partition from overlaying the other. The windows world had used partioning successfully for many years. Apple does have a slick ability to boot from a copy of the OS which is on an external drive. It has saved my kids multiple times when something has gotten hosed up on the internal drive, including a Mac mini with a drive failure during dinal exams and two drive failures on a Macbook. It lets the kids access the internet and get theri work done albiet with a static copy of the OS taken some time in the past. My son was even able to copy to the external drive all of his documents, music and photos off the internal drive that would not boot. Of course he had not learned the value of Time Machine at that point.

  • How can I print from ipad2 via airport extreme to hp printer on USB.

    Is there a way to get iPad2 to print via airport extreme to a non wireless hp printer?

    Apple - iPad - Print right from your iPad with AirPrint.
    Unfortunately, AirPrint will only work with AirPrint enabled HP printers.
    Check the HP site. They may have an app available you can use for your USB / Airport printer.

Maybe you are looking for

  • Notes not syncing with Outlook & not automatically backing up

    When I upgraded to the latest version of iTunes the syncing behavior changed with my 4G.  I sync music, photo's, everything but the "Info" category with my home PC's iTunes.  Then at work I let Contacts, Calendars, Mail & Reminders sync via Exchange.

  • Subclass webutil object group problem

    Hi, I am using 10g form. I download the webutil demo and got a form called WU_TEST_106 in which there is a object group called WEBUTIL. Then I create a new form and drag the object group WEBUTIL of the form WU_TEST_106 to the object group of the new

  • Recognising Airport but no internet connection

    Hi - I have just got one of the older Airport Extreme units. I am getting connection between the airport and my computers but I cannot get on the internet. I just get an alert box saying there is no connection. Any ideas? I am using a Virgin modem. I

  • Audit fixes - username equal password

    Background: Oracle 11g on Windows environment I am working on a query that will provide a list all usernames in my system where the username and password are the same. The problem is the passwords are not plan text so the query give zero result. Is t

  • I can't open any applications on my old Imac G5

    Hi!After I reinstalled the original OSX 10.3 on my old Imac G5 20 inch. bought in2005, I can't open any applications and access my files. How do I fix that? Thanks! Michel D