How can I acquire signals in telemetry way?

Dear all,
There are three or four force sensors mounting in a rotating axis, and they need power supply (11-30V, 10mA) as well. Is there any facility in NI can accomplish this project? Or do you have a similar signal acquisition telemetry system in project?
1. get 3 or 4 channels of voltage/current signals from force sensors in  the rotating axis.
2. provide power for components in the rotating axis.
3. provide driving signals to components in rotating axis.
Thank you very much! 

Dear Jinghang,
I would have thought our cRIO products would be able to make up the main body of your system.
Deterministic controller and FPGA technology perfect for control applications. Furthermore, there are plenty of high sepc "cseries" modules, each with inbuild converters, amplifiers, signal conditioning and font end connectivity.
For example, we have modules built specifically for accelerometer/force sensors. For example, the following module has inbuilt IEPE signal conditioning and very high performance converters.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/202556
I would highly suggest giving your local branch a call to discuss your requirements further.
If you are from the UK or Ireland, please call 01635 523545.
We look forward to hearing from you soon,
Rich R
Applications Engineer
National Instruments UK & Ireland

Similar Messages

  • How can I acquire signal from the 2 counters on my 6034e board?

    I want to record one analog signal and one counter/timer signal with Diadem 8. I have a 6034e board. AI is not a problem, but when I define a counter in Diadem, for one of the two counters of the board, I get no or strange readings.

    In MAX, I can only test one feature: pulse counts. So I connect a TTL signal between the source and the digital ground, and it counts a random number, of around 20-30 pulses, for each trigger. Same in Diadem. When I try period measurement (connected at the gate) or others with Diadem, I don't get anything.
    I believe my wiring is correct as I'm used to counters with the PC-TIO-10 c/t board.

  • How can i acquire signal magnitude per every 0.2hz using pxi 4472

    helloi am using PXI 4472 card for FFT
    analysis using LabView2009
    i need to acquire the frequency Vs
    magnitude for my application
    Can anybody help me out to get
    voltage magnitude for every (df)0.2Hz up to 500Hz bandwidth.
    i could acquire the Voltage
    magnitude for every (df)0.5hz,
    with configuration continuous mode of 1000 sample
    rate and 1000 samples per channel and spectrum measurement Express VI with
    2000msec
    delay time (‘df’=0.5Hz=1/2000mSec), further less ‘df’ program is terminating
    intermittently
    Please give your suggestion

    Here is a good rule of thumb:
    Frequency Span = 0hz to sample rate divided by 2.56
    lines of resolution =  record block size divided by 2.56
    for example a 1khz sample rate and1k darta points is a 0 to 400hz spectrum (401 to 512 is calculated by not fully trusted in machinery world) and 400 bins or one bin per hz, df = 1. 
    so for this example if you need df to be 0.2Hz, you need five times as much data or 5000 data points. 
    Preston Johnson
    Principal Sales Engineer
    Condition Monitoring Systems
    Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
    National Instruments
    [email protected]
    www.ni.com/mcm
    www.ni.com/soundandvibration
    www.ni.com/biganalogdata
    512-683-5444

  • Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to be?

    Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to look?
    Everyone who logs into Facebook on my Firefox has this problem however if we use Internet Explorer - facebook looks normal.

    If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

  • How can one accept that the only way to sync with OSX 10.9 is through I cloud?

    How can one accept that the only way to sync with OSX 10.9 is through I cloud?
    One is now obliged to send private information to an external server...

    Thank you for the link but what a waist of time.
    Who is the idiot that decided to drop manual syncing of contacts and calendars?
    I am on the point of dropping all APPLE machines!
    I am looking to sync without having to worry about security issues, keeping my files and passwords locally on my machines, and not an external server such as a cloud drive.
    Do you know if Outlook syncs also over an external server?
    Do you know of this solution? http://www.codetwo.com/public-folders/share-windows-files-securely/

  • How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures!

    How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures!

    Did you import an old iPhoto library into this one? It sounds like you did - NEVER import an iPhoto library - it does not work and creates a massie mess
    If that is wha tyou did and you still have the old library available drag the bad library to the desktop for now and drag the old library to your ictures folder (No Importing Involved) and launch iPhoto - it will open the library and upgrade as needed - once you are sure your photos are safe and at least one backup cycle has run you can trash the bad library on the desktop
    LN

  • How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures!, How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures! ( macbook )

    How can I delite copies in easy way from "Photo", there are about 4-5 copies each of 3500 pictures! ( macbook )

    Did you import an old iPhoto library into this one? It sounds like you did - NEVER import an iPhoto library - it does not work and creates a massie mess
    If that is wha tyou did and you still have the old library available drag the bad library to the desktop for now and drag the old library to your ictures folder (No Importing Involved) and launch iPhoto - it will open the library and upgrade as needed - once you are sure your photos are safe and at least one backup cycle has run you can trash the bad library on the desktop
    LN

  • How can I acquire and record pre trigger samples

    Hi I would like to acquire and record pre trigger samples. I have used many different methods including: 
    http://digital.ni.com/public.nsf/allkb/9DE9E3E4DAD​9EE93862579C60018B6EA
    the problem is I would like to acquire pre trigger samples before start trigger not reference trigger. I think reference trigger is used for stop triggering not start triggering. Could you please help me on this
    Thanks? 

    Hi tintin_99,
    I hope you are well and thank you for posting your issues to the forum. 
    I wanted to ask you some further information in regards to your application:
    - What version of LabVIEW do you have?
    - What operating system (OS) are you running on your PC/laptop?
    - Which application programming interface (API) are you using? NI-DAQmx, NI-Scope?
    When you mention you want to acquire the pre-trigger samples before the start trigger and not the reference trigger, how are you currently doing this? Would you be able to post up your code so that everyone can have a look at it?
    Here are some further links to look at:
    - Continous Analog Input Acquisition with Pre-trigger Scans using 2 E-series Boards
    - How Can I Acquire Pretrigger Samples with NI-SCOPE?
    - Software Analog Trigger with Pre-Trigger Samples
    - Synchronized Analog Input/Ouput with an Analog Trigger and Pre-Triggered Samples
    I hope this is alright for now.
    Kind Regards,
    Dom C

  • How would i acquire signals from a philips viridia patient monitor?

    i'm looking for a simple way to acquire patient vital sign trend data
    (BP, pulse, etc) from our Philips Viridia patient monitors in the ER.
    How can I capture these signals using biobench?

    You can use a software application called MECIFView.  It uses the MECIF protocol to acquire these signals from certain patient monitors (such as the Viridia).  You can download a demo version at http://www.mecifview.com 

  • GUI organization is messed up - how can I put it back the way it was

    SQL Developer 2.1.1.64
    was running fine, then somehow the GUI got messed up so now connections view takes up half the screen and I can't see the SQL windows and the tables windows. How can I put it back to the way it was? Any time I try to drag and move a window around, it gets worse. I would like to have the connections view only in the left quarter of the window as the default.

    If you simply want to reset everything to default you can backup/delete the settings directory usualli located in:
    Win 7
    C:\Users\%USERNAME%\AppData\Roaming\SQL Developer\systemXXXXXX
    Win XP
    documents and settings\%USERNAME%\Application Data\SQL Developer\systemXXXXXXMind you will lose all your other settings along with the layout, you may want to at least export your connections before trying.
    The layour file itself should be somthing called windowinglayout.xml located somewhere in the above config directory, but last time i checked deleting only this file had no effect.

  • How do I acquire signal few seconds before triggering

    Hello guys,
    I am working on impact test and I want to acquire signal few seconds before trigger starts. How do I configure my DAQ assistant to do that?
    Thanks.
    Solved!
    Go to Solution.

    Well usually you configure your DAQ device (Which one do you use?) to continiously capture data into a ringbuffer and set the triggerposition to 20%-50% (related to the number of samples you want to read). After the trigger is set the start of your data will be set by the driver. 
    All this is done by the DAQmx or scope driver. Just set the samplerate, number of samples, trigger and position of trigger.
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • HT4976 i can barely see the icons, how can they be enlarged.  the way they appear is almost irritating to recipients

    i have apple emoji installed on my iphone but the icons are so small that when you attach to a text, it is more irritating than useful for recipient to see.  how can icons be enlarged?

    Try going to Settings>General>Accessibility>Zoom to be sure it's off.  If the screen is already magnified, double-tap the screen with three fingers to zoom out.

  • How can I acquire adobe software for my 1st generation iPad?

    I was told that if I contact Adobe, they would help me obtain older software for my iPad that isn't allowed to update past 5.1.1.
    How can I get them?

    I sincerely doubt that's possible. The iOS operating system doesn't allow downloading older versions of software from the App Store, and software creators for the iOS are not allowed to distribute software outside of the App Store (except for testing purposes).

  • How can I acquire trace data from Agilent(HP)8510c Network Analyser in VB6 using PCI-GPIB and NI-488.2.

    I am developing an application in VB6 for measurements with Agilent (HP)8510C network Analyser using NI-488.2 and National Instrument PCI-GPIB card. I want to take data for the whole 51 points. In HPBASIC which used to be employed for this purpose it is done using OUTPDATA command and the data is in a 2-dimensional array. How can I do this in VB6 with the hardware above.
    kapil

    Hi Kapil:
    Please refer to a previous post on the same topic:
    http://forums.ni.com/ni/board/message?board.id=140&message.id=7758#M7758
    Although this is for C++, the basic functionality should be the same. Since OUTPDATA is from a specific instrument driver, your best bet will be comparing it to the instrument drivers mentioned in the previous post.
    Thank you,
    Emilie S.
    National Instruments
    Applications Engineer

  • How can i acquire analog signals from PXI 4472 card?

    Regards
    Aks
    (Appreciate answers by giving KUDOS)
    Hit the stars.............. sky is not the limit.

    There are a lot of shipping examples for DAQmx. Once you open the example finder (Help>Find Examples), use the 'hardware' listbox at the bottom to find all of the examples that pertain to a 4472.
    Message Edited by Dennis Knutson on 10-28-2008 07:30 AM

Maybe you are looking for

  • How can I open a PDF stored in IXOS and then display it in a BSP

    Hello gurus, I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the l

  • How can I resolve an ongoing slow broadband(0.07 M...

    I have had problems with my Broadband speed since beginning of June- it has been steadily getting slower until 1st July when it was 0.07 Mbps and is n ow virtually unusable. I reported it to BT on the 1st or 2nd and had to undertake various tests at

  • Mapping Runtime failing for all messages

    Hi Experts, We are facing an issue with our mapping runtime in the integration engine. Any message going through the integration engine is giving a mapping error as shown below (for example): LinkageError during appliction Java mapping com/sap/xi/tf/

  • Finder freezes after multiple file copy

    Hi!  I recently bought an external hard disk drive (1TB) and had it formatted for use of the Mac.   I copied all the files in my All Images folder to the HDD by selecting all the files and dragging to the HDD.   However, it seems to have copied/dupli

  • Query on a table with indexed date field

    I have a table with a date column which is indexed. If I run a query like "select column1 where date_field='20-JAN-04' for example it is fast and uses index. If I run select column1 where date < '20-JAN-04' it is slow and doesnt use the index. I logg