How can I activate the transfer rules for the ODS updating a data target.
We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then <u><b>'activate' the transfer rules</b></u>.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
<b>Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
Thanks for your assistance.
Denny
Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Similar Messages
-
How can I activate drill down report for planned line items please urgent?
Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
<b>RCOPCA08 Profit Center: Plan Line Items</b>
VVR -
How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?
How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?
You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely. -
How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.
You can't, at least not the one provided by Apple.
B-rock -
How can i add a navigation rule at the runtime of JSF?
Hello,
how can i add a navigation rule at the runtime of JSF. Maybe i should use the method "addNavigationRule()" in class "FacesConfig", but i do not know, how can i obtain the instance of class "FacesConfig". Can anybody help me?
Thank you very much!!!Just curious: Why whould you want to add navigation Rules at run time. I believe the navigation rules should be set to begin with - "by s/w Architect Design".
Else you can always use Redirect / Forward. -
I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?
There is no serial number and you don't need one. What you need for a subscription is to SIGN IN within Acrobat, so it knows the subscriptions you own.
-
Strat routine code in transfer rules for the Extractor - 0CO_OM_CCA_1
Dear SDNers,
I have a scenario to implement a start rouine code in the transfer rulesfor the Extractor - 0CO_OM_CCA_1 , please give a light on this.
Scenario:
The extractor 0C0_OM_CCA_1 brings in Cost Center transactional data for costs and allocation into the SAP BI data warehouse. A cross reference table will be created in SAP BI for Profit Center. These tables will have CRM (CARDIAC RHYTHM MANAGEMENT) Profit Centers stored in them.
In the transfer rules for 0CO_OM_CCA_1, add ABAP code in the start routine to block CRM (CARDIAC RHYTHM MANAGEMENT) data. The code will have the following logic:
Check Cost center master data table u2018/BI0/QCOSTCENTERu2019
This table u2018/BI0/QCOSTCENTERu2019 being time dependent, use the last day of the fiscal period from transactional data as the date to select from u2018/BI0/QCOSTCENTERu2019.
Go to the Profit center reference table and identify if the data belongs to BSC Boston Scientific/CRM (CARDIAC RHYTHM MANAGEMENT).
Block CRM (CARDIAC RHYTHM MANAGEMENT) data.
Best Regards,
Satya
Edited by: satya prasad on Sep 8, 2009 8:16 AMYou could give this a try:
DATA: wa_qcostcenter TYPE /bi0/qcostcenter,
wa_ppcxref TYPE /bic/ppcxref, "Custom Profit Center Cross-Reference table
l_tabix TYPE sy-tabix,
l_last_date TYPE d.
LOOP AT data_package.
l_tabix = sy-tabix.
CALL FUNCTION
'LAST_DAY_IN_PERIOD_GET'
EXPORTING
i_gjahr = data_package-fiscper+0(4)
i_periv = data_package-fiscvarnt
i_poper = data_package-fiscper+4(3)
IMPORTING
e_date = l_last_date.
SELECT SINGLE
FROM
/bi0/qcostcenter
INTO
wa_qcostcenter
WHERE
costcenter = data_package-kostl
AND dateto <= l_last_date
AND datefrom >= l_last_date.
IF sy-subrc EQ 0.
SELECT
FROM
/bic/ppcxref
INTO
wa_ppcxref
WHERE
profit_ctr = wa_qcostcenter-profit_ctr.
IF sy-subrc EQ 0.
IF wa_ppcxref-data = 'CRM'.
DELETE
data_package
INDEX
l_tabix.
ENDIF.
ENDIF.
ENDLOOP.
Edited by: Dennis Scoville on Sep 8, 2009 4:32 PM -
i can't access my LAN card. somehow it is disappeared. how can i make it visible again for the OS? my OS is windows 7. thanks very much for your help
right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
Diego -
I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?
Highest an eMac can go is 10.5.8...
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply. -
How can i do Procurement of land for the company?
how can i do Procurement of land for the company?wher we cannot assign a cost center or any other cost object?
Hi ,
Procurement of Land is a Asset Purchase.
You have create a Asset Master with help of Finance team and create PO with A/c assignment A. Their you have to mention the Asset no. and the respective GL a/c.
Hope this will help.
Thanks,
Kumar Arcot -
Since updating my iPhone 4 to iOS5, my music stats (play count, last played, etc.) no long sync to iTunes. How can I fix this? Thanks for the help.
If you have any podcasts in your iTunes library you should see a Podcasts sync setting tab to the right when you connect your phone and click on its name on the left sidebar (see image below). On this tab check to sync podcasts and sync your phone.
-
How can I get a printer driver for the hp psc 2410 photosmart?
When I tried toadd the printer, there was a message saying that the printer driver for the 2400 series was available, but when I tried to download it, I received an error message saying that I couldn't download it because of a network error. My Macbook is not on a network at the moment. How can I get the driver so I can print?
You can also install this update directly (not through app store):
http://support.apple.com/kb/dl907
If you want us to help more, you will need to give us more detailed info. "It didn't work" leaves me wondering exactly what you've done so far.
For example, after clicking Add/+ and selecting the printer you want, have you waited for a full minute for the Mac to find the driver
- OR -
when it starts searching for driver, have you tried going to the pull-down menu where it says "Use: Auto-select," and choosing "Select Printer Software..." to make a manual selection? -
How can I specify an area path for the work item created on build failure?
In our department we are working with multiple build definitions for different parts of one Team project. We heavily use the Team Project feature. Teams are defined by area path nodes, so each team can only see it's area path. No one (except the admins)
can see the root project node.
When a build breaks, TFS generates a Bug. Unfortunately, this bug is assigned to the area path root node, so nobody can see the generated bug and act on it.
We would prefer to specify the area path for the generated work item in the build definition (not template, but property of a build definition), as every build belongs exclusively to one team.
I have found that you can populate fields of the generated work item by filling the "custom fields" of the "create work item" activity. But how do I set the area path as a parameter?
GuenterHi Cuenter,
Thanks for your post.
You should set the value like below in that activity:
New
Dictionary(Of
String,
String)
From {{"Area
Path",
"teamprojectname\areaname"}}
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How can I activate my new, unlocked iPhone 4, without a voice/data plan?
Purchased a new, unlocked iPhone 4 directly from apple.com. We're going to be using it for in-house testing, and we don't want/need a service plan.
But we can't activate the phone without a SIM card. The only decent advice we've gotten is to activate it with someone else's iPhone 4 SIM card. But we'd need to do the same thing for any iOS update.
When I visited AT&T, they said I couldn't get an iPhone 4 SIM without a contract. I'm not entirely sure that employee was correct.
Any advice? This has been frustrating.You can purchase an unlocked iPhone, without contract, directly from Apple online or in any Apple retail store. Then get a cheap T-Mobile sim & activate the phone. Any T-Mobile store will be glad to help. AT&T wants ALL iPhone users under contract. While it is possible to establish service on a post-paid basis, AT&T does not like to do this for iPhone users. Since your phone is officially unlocked, you don't have to deal with AT&T.
-
Can there be several Sieve rules for the same match?
Following up with my other question, here's a more specific one: can I have several working Sieve rules matching the same attribute values? Or does processing stop on the first match?
Also, is there supposed to be a toggle/flag that specifies whether a certain rule should be the "last" (if it matches, whether to abort processing or to do whatever action specified in this rule and go on to the next rule).
I believe it is possible to write up complex Sieve scripts and save tehm to LDAP, but that's not so user-frienfly for just anybody to do ;)
So the main usecase for this question concerns the Sieve rules defined by a user in his or her Options tab.JimKlimov wrote:
And how exactly does fileinto work? Does it happen once or more?Multiple fileinto actions to different folders results in a "copy" of the email in each folder, e.g. if I use a filter which has fileinto "Inbox", fileinto "Sent", fileinto "Trash", I get the following logged:
24-Jul-2008 09:49:42.67 ims-ms D 1 rfc822;[email protected] shjorth+Inbox@ims-ms-daemon mailsrv ''
24-Jul-2008 09:49:42.67 ims-ms D 1 rfc822;[email protected] shjorth+Sent@ims-ms-daemon mailsrv ''
24-Jul-2008 09:49:42.67 ims-ms D 1 rfc822;[email protected] shjorth+Trash@ims-ms-daemon mailsrv ''I say "copy" because each email is actually a hard-link so the storage usage from the 3 copies is actually the email size + size of two hard-links. So for the email above, these were the messages on disk:
Inbox: 613067 -rw------- 3 mailsrv mail 591 Jul 24 09:49 124.msg
Sent: 613067 -rw------- 3 mailsrv mail 591 Jul 24 09:49 11.msg
Trash: 613067 -rw------- 3 mailsrv mail 591 Jul 24 09:49 122.msg613067 is the inode number which as you will note is identical across the messages on disk.
From the RFC I infer that it should happen once for any one folder, but that probably doesn't mean one filing for the whole mailbox, right?Correct.
If I have "rule1" which files some messages into a folder (without a "stop;"), "rule2" which forwards emails, and "rule3" which files all messages to the inbox, am I supposed to still get cloned messages (inbox and subfolder)?If all three actions are performed, yes.
Regards,
Shane.
Maybe you are looking for
-
Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64
-
Playing music in iTunes from an external HD
I moved 600gbs of music to an external HD to save HD space and run iTunes from the external. After the transfer, I told or pointed to iTunes where the 'new' music is on the external HD but iTunes will not read the music - it is asking me to find eac
-
Hi, I'm trying to use the following PL/SQL statement: select now from dual; It should return the date/time, and it won't work. It works in another instance of HTMLDB that I have installed pointing to a different database instance, running the same ve
-
Contract opportunity for flex skin developer
Hi, I'm looking for an experienced Flex developer to help me reskin my web service. I will supply the graphic design and a fullly functional system with about six screens implemented in Flex 3.5. Good communication and teamwork is a must since we'll
-
Stock is shown as outstanding although 261 movement type has been performed
Hi all, I was doing 261 movement type against production order without passing reservation number but the client said that if we do not pass reservation number stock is shown as outstanding against reservation leading to inaccurate results on MRP run